Last updated: 2018-11-13

workflowr checks: (Click a bullet for more information)
  • R Markdown file: up-to-date

    Great! Since the R Markdown file has been committed to the Git repository, you know the exact version of the code that produced these results.

  • Environment: empty

    Great job! The global environment was empty. Objects defined in the global environment can affect the analysis in your R Markdown file in unknown ways. For reproduciblity it’s best to always run the code in an empty environment.

  • Seed: set.seed(12345)

    The command set.seed(12345) was run prior to running the code in the R Markdown file. Setting a seed ensures that any results that rely on randomness, e.g. subsampling or permutations, are reproducible.

  • Session information: recorded

    Great job! Recording the operating system, R version, and package versions is critical for reproducibility.

  • Repository version: 1357eac

    Great! You are using Git for version control. Tracking code development and connecting the code version to the results is critical for reproducibility. The version displayed above was the version of the Git repository at the time these results were generated.

    Note that you need to be careful to ensure that all relevant files for the analysis have been committed to Git prior to generating the results (you can use wflow_publish or wflow_git_commit). workflowr only checks the R Markdown file, but you know if there are other scripts or data files that it depends on. Below is the status of the Git repository when the results were generated:
    
    Ignored files:
        Ignored:    .DS_Store
        Ignored:    .Rhistory
        Ignored:    .Rproj.user/
        Ignored:    data/.DS_Store
        Ignored:    output/.DS_Store
    
    Untracked files:
        Untracked:  KalistoAbundance18486.txt
        Untracked:  analysis/ncbiRefSeq_sm.sort.mRNA.bed
        Untracked:  analysis/snake.config.notes.Rmd
        Untracked:  analysis/verifyBAM.Rmd
        Untracked:  data/18486.genecov.txt
        Untracked:  data/APApeaksYL.total.inbrain.bed
        Untracked:  data/ChromHmmOverlap/
        Untracked:  data/GM12878.chromHMM.bed
        Untracked:  data/GM12878.chromHMM.txt
        Untracked:  data/NuclearApaQTLs.txt
        Untracked:  data/PeaksUsed/
        Untracked:  data/RNAkalisto/
        Untracked:  data/TotalApaQTLs.txt
        Untracked:  data/Totalpeaks_filtered_clean.bed
        Untracked:  data/YL-SP-18486-T-combined-genecov.txt
        Untracked:  data/YL-SP-18486-T_S9_R1_001-genecov.txt
        Untracked:  data/apaExamp/
        Untracked:  data/bedgraph_peaks/
        Untracked:  data/bin200.5.T.nuccov.bed
        Untracked:  data/bin200.Anuccov.bed
        Untracked:  data/bin200.nuccov.bed
        Untracked:  data/clean_peaks/
        Untracked:  data/comb_map_stats.csv
        Untracked:  data/comb_map_stats.xlsx
        Untracked:  data/comb_map_stats_39ind.csv
        Untracked:  data/combined_reads_mapped_three_prime_seq.csv
        Untracked:  data/diff_iso_trans/
        Untracked:  data/ensemble_to_genename.txt
        Untracked:  data/example_gene_peakQuant/
        Untracked:  data/filtered_APApeaks_merged_allchrom_refseqTrans.closest2End.bed
        Untracked:  data/filtered_APApeaks_merged_allchrom_refseqTrans.closest2End.noties.bed
        Untracked:  data/first50lines_closest.txt
        Untracked:  data/gencov.test.csv
        Untracked:  data/gencov.test.txt
        Untracked:  data/gencov_zero.test.csv
        Untracked:  data/gencov_zero.test.txt
        Untracked:  data/gene_cov/
        Untracked:  data/joined
        Untracked:  data/leafcutter/
        Untracked:  data/merged_combined_YL-SP-threeprimeseq.bg
        Untracked:  data/mol_overlap/
        Untracked:  data/mol_pheno/
        Untracked:  data/nom_QTL/
        Untracked:  data/nom_QTL_opp/
        Untracked:  data/nom_QTL_trans/
        Untracked:  data/nuc6up/
        Untracked:  data/other_qtls/
        Untracked:  data/peakPerRefSeqGene/
        Untracked:  data/perm_QTL/
        Untracked:  data/perm_QTL_opp/
        Untracked:  data/perm_QTL_trans/
        Untracked:  data/reads_mapped_three_prime_seq.csv
        Untracked:  data/smash.cov.results.bed
        Untracked:  data/smash.cov.results.csv
        Untracked:  data/smash.cov.results.txt
        Untracked:  data/smash_testregion/
        Untracked:  data/ssFC200.cov.bed
        Untracked:  data/temp.file1
        Untracked:  data/temp.file2
        Untracked:  data/temp.gencov.test.txt
        Untracked:  data/temp.gencov_zero.test.txt
        Untracked:  output/picard/
        Untracked:  output/plots/
        Untracked:  output/qual.fig2.pdf
    
    Unstaged changes:
        Modified:   analysis/28ind.peak.explore.Rmd
        Modified:   analysis/39indQC.Rmd
        Modified:   analysis/cleanupdtseq.internalpriming.Rmd
        Modified:   analysis/coloc_apaQTLs_protQTLs.Rmd
        Modified:   analysis/dif.iso.usage.leafcutter.Rmd
        Modified:   analysis/diff_iso_pipeline.Rmd
        Modified:   analysis/explore.filters.Rmd
        Modified:   analysis/flash2mash.Rmd
        Modified:   analysis/overlapMolQTL.Rmd
        Modified:   analysis/overlap_qtls.Rmd
        Modified:   analysis/peakGeneCovEx.Rmd
        Modified:   analysis/peakOverlap_oppstrand.Rmd
        Modified:   analysis/pheno.leaf.comb.Rmd
        Modified:   analysis/swarmPlots_QTLs.Rmd
        Modified:   analysis/test.max2.Rmd
        Modified:   code/Snakefile
    
    
    Note that any generated files, e.g. HTML, png, CSS, etc., are not included in this status report because it is ok for generated content to have uncommitted changes.
Expand here to see past versions:
    File Version Author Date Message
    Rmd 1357eac Briana Mittleman 2018-11-13 res from no sig analysis
    html ff8c969 Briana Mittleman 2018-11-12 Build site.
    Rmd d08f3f9 Briana Mittleman 2018-11-12 fix code for no sig permutations
    html 83f1b14 Briana Mittleman 2018-11-08 Build site.
    Rmd ab79f33 Briana Mittleman 2018-11-08 add enrichment analysis (messed up perm)
    html 19b98b3 Briana Mittleman 2018-11-07 Build site.
    Rmd 70cf09c Briana Mittleman 2018-11-07 add perm res
    html 2ec5ffd Briana Mittleman 2018-11-07 Build site.
    Rmd 962e39b Briana Mittleman 2018-11-07 move chromhmm analysis to its own analysis


Librarys

library(workflowr)
This is workflowr version 1.1.1
Run ?workflowr for help getting started
library(reshape2)
library(tidyverse)
── Attaching packages ─────────────────────────────────────────────────────────────────────────── tidyverse 1.2.1 ──
✔ ggplot2 3.0.0     ✔ purrr   0.2.5
✔ tibble  1.4.2     ✔ dplyr   0.7.6
✔ tidyr   0.8.1     ✔ stringr 1.3.1
✔ readr   1.1.1     ✔ forcats 0.3.0
── Conflicts ────────────────────────────────────────────────────────────────────────────── tidyverse_conflicts() ──
✖ dplyr::filter() masks stats::filter()
✖ dplyr::lag()    masks stats::lag()
library(VennDiagram)
Loading required package: grid
Loading required package: futile.logger
library(data.table)

Attaching package: 'data.table'
The following objects are masked from 'package:dplyr':

    between, first, last
The following object is masked from 'package:purrr':

    transpose
The following objects are masked from 'package:reshape2':

    dcast, melt
library(ggpubr)
Loading required package: magrittr

Attaching package: 'magrittr'
The following object is masked from 'package:purrr':

    set_names
The following object is masked from 'package:tidyr':

    extract

Attaching package: 'ggpubr'
The following object is masked from 'package:VennDiagram':

    rotate
library(cowplot)

Attaching package: 'cowplot'
The following object is masked from 'package:ggpubr':

    get_legend
The following object is masked from 'package:ggplot2':

    ggsave

I am continuing the analysis I started in the characterization of the APAqtl analysis. I need to run permutations to enrichment statistics.

I created the significant SNP files in the Characterize Total APAqtl analysis analysis.

chromHmm=read.table("../data/ChromHmmOverlap/chromHMM_regions.txt", col.names = c("number", "name"), stringsAsFactors = F)

NuclearOverlapHMM=read.table("../data/ChromHmmOverlap/Nuc_overlapHMM.bed", col.names=c("chrom", "start", "end", "sid", "significance", "strand", "number"))
NuclearOverlapHMM$number=as.integer(NuclearOverlapHMM$number)
NuclearOverlapHMM_names=NuclearOverlapHMM %>% left_join(chromHmm, by="number")
NuclearOverlapHMM_names$number=as.character(NuclearOverlapHMM_names$number)
ggplot(NuclearOverlapHMM_names, aes(x=number, fill=name)) + geom_bar() + labs(title="ChromHMM labels for Nuclear APAQtls" , y="Number of SNPs", x="Region")+theme(axis.text.x = element_text(angle = 90, hjust = 1))

Expand here to see past versions of unnamed-chunk-3-1.png:
Version Author Date
83f1b14 Briana Mittleman 2018-11-08
2ec5ffd Briana Mittleman 2018-11-07

Evaluate results for total:

TotalOverlapHMM=read.table("../data/ChromHmmOverlap/Tot_overlapHMM.bed", col.names=c("chrom", "start", "end", "sid", "significance", "strand", "number"))

TotalOverlapHMM_names=TotalOverlapHMM %>% left_join(chromHmm, by="number")
TotalOverlapHMM_names$number=as.character(TotalOverlapHMM_names$number)
ggplot(TotalOverlapHMM_names, aes(x=number, fill=name)) + geom_bar() + labs(title="ChromHMM labels for Total APAQtls" , y="Number of SNPs", x="Region")+theme(axis.text.x = element_text(angle = 90, hjust = 1))

Expand here to see past versions of unnamed-chunk-5-1.png:
Version Author Date
83f1b14 Briana Mittleman 2018-11-08
2ec5ffd Briana Mittleman 2018-11-07

Pull one set of random snps:

I do still need to get 880 random snps.

shuf -n 880 /project2/gilad/briana/threeprimeseq/data/nominal_APAqtl_trans/filtered_APApeaks_merged_allchrom_refseqGenes_pheno_Nuclear_NomRes.txt > /project2/gilad/briana/threeprimeseq/data/nominal_APAqtl_trans/randomSnps/ApaQTL_nuclear_Random880.txt

Run QTLNOMres2SigSNPbed.py with nuclear 880 and sort output

import pybedtools 

RANDnuc=pybedtools.BedTool('/project2/gilad/briana/threeprimeseq/data/nominal_APAqtl_trans/randomSnps/ApaQTL_nuclear_Random880.sort.bed') 



hmm=pybedtools.BedTool("/project2/gilad/briana/genome_anotation_data/GM12878.chromHMM.sort.bed")

#map hmm to snps  
NucRnad_overlapHMM=RANDnuc.map(hmm, c=4)


#save results  

NucRnad_overlapHMM.saveas("/project2/gilad/briana/threeprimeseq/data/nominal_APAqtl_trans/randomSnps/ApaQTL_nuclear_Random_overlapHMM.bed")
NuclearRandOverlapHMM=read.table("../data/ChromHmmOverlap/ApaQTL_nuclear_Random_overlapHMM.bed", col.names=c("chrom", "start", "end", "sid", "significance", "strand", "number"))

NuclearRandOverlapHMM_names=NuclearRandOverlapHMM %>% left_join(chromHmm, by="number")
ggplot(NuclearRandOverlapHMM_names, aes(x=name)) + geom_bar() + labs(title="ChromHMM labels for Nuclear APAQtls (Random)" , y="Number of SNPs", x="Region")+theme(axis.text.x = element_text(angle = 90, hjust = 1))

Expand here to see past versions of unnamed-chunk-9-1.png:
Version Author Date
2ec5ffd Briana Mittleman 2018-11-07

To put this on the same plot I can count the number in each then plot them next to eachother.

random_perChromHMM_nuc=NuclearRandOverlapHMM_names %>%  group_by(name) %>% summarise(Random=n())
sig_perChromHMM_nuc= NuclearOverlapHMM_names %>%  group_by(name) %>%  summarise(Nuclear_QTLs=n())

perChrommHMM_nuc=random_perChromHMM_nuc %>%  full_join(sig_perChromHMM_nuc, by="name", ) %>% replace_na(list(Random=0,Total_QTLs=0))  

perChrommHMM_nuc_melt=melt(perChrommHMM_nuc, id.vars="name")
names(perChrommHMM_nuc_melt)=c("Region","Set", "N_Snps" )
chromenrichNuclearplot=ggplot(perChrommHMM_nuc_melt, aes(x=Region, y=N_Snps, by=Set, fill=Set)) + geom_bar(position="dodge", stat="identity") +theme(axis.text.x = element_text(angle = 90, hjust = 1)) + labs(title="Enrichment of Nuclear QTLs by chromatin region", y="Number of Snps", x="Chromatin Region") + scale_fill_brewer(palette="Paired")
chromenrichNuclearplot

Expand here to see past versions of unnamed-chunk-11-1.png:
Version Author Date
2ec5ffd Briana Mittleman 2018-11-07

ggsave("../output/plots/ChromHmmEnrich_Nuclear.png", chromenrichNuclearplot)
Saving 7 x 5 in image

Compare enrichment between fractions

I want to make a plot with the enrichment by fraction. I am first going to get an enrichemnt score for each bin naively by looking at the QTL/random in each category.

#perChrommHMM_nuc$Random= as.integer(perChrommHMM_nuc$Random)
#perChrommHMM_nuc_enr=perChrommHMM_nuc %>%  mutate(Nuclear=Nuclear_QTLs-Random)

#perChrommHMM_tot_enr=read.table("../data/ChromHmmOverlap/perChrommHMM_Total_enr.txt",stringsAsFactors = F,header = T)
#allenrich=perChrommHMM_tot_enr %>% inner_join(perChrommHMM_nuc_enr, by="name") %>% select(name, Total, Nuclear)

#allenrich_melt=melt(allenrich, id.vars="name")

plot it

#chromenrichBoth=ggplot(allenrich_melt, aes(x=name, by=variable, y=value, fill=variable)) + geom_bar(stat="identity", position = "dodge") + theme(axis.text.x = element_text(angle = 90, hjust = 1)) + labs(title="QTL-Random for each bin by fraction", y="Num QTL SNPs - Num Random SNPs") + scale_fill_manual(values=c("darkviolet", "deepskyblue3"))


#ggsave("../output/plots/ChromHmmEnrich_BothFrac.png", chromenrichBoth)

Permutations

I want to permute the background snps so i can get a better expectation. To do this I need to chose random lines from the nominal file, change the lines to snp format, overlap with HMM, count how many are in each category, and append the list to a dataframe that is category by permuation.

DO this for total first (118 snps)

total_random118_chromHmm.sh

#!/bin/bash

#SBATCH --job-name=total_random118_chromHmm_f
#SBATCH --account=pi-yangili1
#SBATCH --time=36:00:00
#SBATCH --output=total_random118_chromHmm_f.out
#SBATCH --error=total_random118_chromHmm_f.err
#SBATCH --partition=bigmem2
#SBATCH --mem=200G
#SBATCH --mail-type=END

module load Anaconda3
source activate three-prime-env


#test with 2 permutations then make it 1000  
#choose random res
for i in {1..1000};
do
shuf -n 118 /project2/gilad/briana/threeprimeseq/data/nominal_APAqtl_trans/filtered_APApeaks_merged_allchrom_refseqGenes_pheno_Total_NomRes.txt > /project2/gilad/briana/threeprimeseq/data/random_QTLsnps/Total/randomRes_Total_118_${i}.txt
done

#make random 
for i in {1..1000};
do
python randomRes2SNPbed.py Total 118 ${i}
done 


#cat res together   
cat /project2/gilad/briana/threeprimeseq/data/random_QTLsnps/Total/snp_bed/* > /project2/gilad/briana/threeprimeseq/data/random_QTLsnps/Total/snp_bed_all/randomRes_Total_118_ALLperm.bed


#sort full file 
sort -k1,1 -k2,2n /project2/gilad/briana/threeprimeseq/data/random_QTLsnps/Total/snp_bed_all/randomRes_Total_118_ALLperm.bed > /project2/gilad/briana/threeprimeseq/data/random_QTLsnps/Total/snp_bed_all/randomRes_Total_118_ALLperm.sort.bed


#hmm overlap
python overlap_chromHMM.py  Total 118 1000

#Next I would pull this into R to do the group by and average!

pull_random_lines.py

def main(inFile, outFile ,nsamp):
  nom_res= pd.read_csv(inFile, sep="\t", encoding="utf-8",header=None)
  out=open(outFile, "w")
  sample=nom_res.sample(nsamp)
  sample.to_csv(out, sep="\t", encoding='utf-8', index=False, header=F)
  out.close()
    
if __name__ == "__main__":
    import sys
    import pandas as pd
    fraction = sys.argv[1]
    nsamp=sys.argv[2]
    nsamp=int(nsamp)
    iter=sys.argv[3]
    inFile = "/project2/gilad/briana/threeprimeseq/data/nominal_APAqtl_trans/filtered_APApeaks_merged_allchrom_refseqGenes_pheno_%s_NomRes.txt"%(fraction)
    outFile = "/project2/gilad/briana/threeprimeseq/data/random_QTLsnps/%s/randomRes_%s_%d_%s.txt"%(fraction,fraction, nsamp, iter)
    main(inFile, outFile, nsamp)

randomRes2SNPbed.py

def main(inFile, outFile):
    fout=open(outFile, "w")
    fin=open(inFile, "r")
    for ln in fin:
          pid, sid, dist, pval, slope = ln.split()
          chrom, pos= sid.split(":")
          name=sid
          start= int(pos)-1
          end=int(pos)
          strand=pid.split(":")[3].split("_")[1]
          pval=float(pval)
          fout.write("%s\t%s\t%s\t%s\t%s\t%s\n"%(chrom, start, end, name, pval, strand))
    fout.close()

if __name__ == "__main__":
    import sys
    fraction=sys.argv[1]
    nsamp=sys.argv[2]
    nsamp=int(nsamp)
    iter=sys.argv[3]
    inFile = "/project2/gilad/briana/threeprimeseq/data/random_QTLsnps/%s/randomRes_%s_%d_%s.txt"%(fraction,fraction, nsamp, iter)
    outFile= "/project2/gilad/briana/threeprimeseq/data/random_QTLsnps/%s/snp_bed/randomRes_%s_%d_%s.bed"%(fraction,fraction, nsamp, iter)
    main(inFile,outFile) 

overlap_chromHMM.py




def main(inFile, outFile):
  rand=pybedtools.BedTool(inFile) 
  hmm=pybedtools.BedTool("/project2/gilad/briana/genome_anotation_data/GM12878.chromHMM.sort.bed")
  #map hmm to snps
  Rand_overlapHMM=rand.map(hmm, c=4)
  #save results
  Rand_overlapHMM.saveas(outFile)


if __name__ == "__main__":
    import sys
    import pandas as pd
    import pybedtools
    fraction=sys.argv[1]
    nsamp=sys.argv[2]
    niter=sys.argv[3]
    inFile = "/project2/gilad/briana/threeprimeseq/data/random_QTLsnps/%s/snp_bed_all/randomRes_%s_%s_ALLperm.sort.bed"%(fraction,fraction, nsamp)
    outFile= "/project2/gilad/briana/threeprimeseq/data/random_QTLsnps/%s/chromHMM_overlap/randomres_overlapChromHMM_%s_%s_%s.txt"%(fraction,fraction,nsamp, niter)
    main(inFile,outFile)

*Nuclear 880

nuclear_random880_chromHmm.sh

#!/bin/bash

#SBATCH --job-name=nuc_random880_chromHmm
#SBATCH --account=pi-yangili1
#SBATCH --time=36:00:00
#SBATCH --output=nuc_random880_chromHmm.out
#SBATCH --error=nuc_random880_chromHmm.err
#SBATCH --partition=bigmem2
#SBATCH --mem=200G
#SBATCH --mail-type=END

module load Anaconda3
source activate three-prime-env


#test with 2 permutations then make it 1000  
#choose random res
for i in {1..1000};
do
shuf -n 880 /project2/gilad/briana/threeprimeseq/data/nominal_APAqtl_trans/filtered_APApeaks_merged_allchrom_refseqGenes_pheno_Nuclear_NomRes.txt > /project2/gilad/briana/threeprimeseq/data/random_QTLsnps/Nuclear/randomRes_Nuclear_880_${i}.txt
done

#make random 
for i in {1..1000};
do
python randomRes2SNPbed.py Nuclear 880 ${i} 
done 


#cat res together   
cat /project2/gilad/briana/threeprimeseq/data/random_QTLsnps/Nuclear/snp_bed/* > /project2/gilad/briana/threeprimeseq/data/random_QTLsnps/Nuclear/snp_bed_all/randomRes_Nuclear_880_ALLperm.bed


#sort full file 
sort -k1,1 -k2,2n /project2/gilad/briana/threeprimeseq/data/random_QTLsnps/Nuclear/snp_bed_all/randomRes_Nuclear_880_ALLperm.bed > /project2/gilad/briana/threeprimeseq/data/random_QTLsnps/Nuclear/snp_bed_all/randomRes_Nuclear_880_ALLperm.sort.bed


#hmm overlap
python overlap_chromHMM.py  Nuclear 880 1000

#Next I would pull this into R to do the group by and average!

Perm didnt finish: do this with less (824)

nuclear_random880_chromHmm.sm.sh

#!/bin/bash

#SBATCH --job-name=nuc_random880_chromHmm_sm
#SBATCH --account=pi-yangili1
#SBATCH --time=24:00:00
#SBATCH --output=nuc_random880_chromHmm_sm.out
#SBATCH --error=nuc_random880_chromHmm_sm.err
#SBATCH --partition=bigmem2
#SBATCH --mem=100G
#SBATCH --mail-type=END

module load Anaconda3
source activate three-prime-env
#make random 
for i in {1..824};
do
python randomRes2SNPbed.py Nuclear 880 ${i} 
done 


#cat res together   
cat /project2/gilad/briana/threeprimeseq/data/random_QTLsnps/Nuclear/snp_bed/* > /project2/gilad/briana/threeprimeseq/data/random_QTLsnps/Nuclear/snp_bed_all/randomRes_Nuclear_880_ALLperm.bed


#sort full file 
sort -k1,1 -k2,2n /project2/gilad/briana/threeprimeseq/data/random_QTLsnps/Nuclear/snp_bed_all/randomRes_Nuclear_880_ALLperm.bed > /project2/gilad/briana/threeprimeseq/data/random_QTLsnps/Nuclear/snp_bed_all/randomRes_Nuclear_880_ALLperm.sort.bed


#hmm overlap
python overlap_chromHMM.py  Nuclear 880 824

I need a way to make this more efficient to run 1000 permutations. Here I will look at the results from the 824 permutations.

nuclear_perm824= read.table("../data/ChromHmmOverlap/randomres_overlapChromHMM_Nuclear_880_824.txt", col.names=c("chrom", "start", "end", "sid", "significance", "strand", "number"),stringsAsFactors = F, na.strings = "NA")
#924 snps are not annoated 

nuclear_perm824$number=as.integer(as.factor(nuclear_perm824$number))

nuclear_perm824_names=nuclear_perm824 %>% left_join(chromHmm, by="number")

random_perChromHMM_nuc_PERM=nuclear_perm824_names %>%  group_by(name) %>% summarise(Random=n()) %>% mutate(Random_perm=Random/824) %>%  replace_na(list(name="No_annoation")) 

perChrommHMM_nuc_withPerm=random_perChromHMM_nuc_PERM %>%  full_join(sig_perChromHMM_nuc, by="name" ) %>% replace_na(list(Random=0,Nuclear_QTLs=0)) %>%  select(name,Random_perm, Nuclear_QTLs)

 

perChrommHMM_nuc_withPerm_melt=melt(perChrommHMM_nuc_withPerm, id.vars="name")
names(perChrommHMM_nuc_withPerm_melt)=c("Region","Set", "N_Snps" )




ggplot(perChrommHMM_nuc_withPerm_melt, aes(x=Region, y=N_Snps, by=Set, fill=Set)) + geom_bar(position="dodge", stat="identity") +theme(axis.text.x = element_text(angle = 90, hjust = 1)) + labs(title="Enrichment of Nuclear QTLs by chromatin region", y="Number of Snps", x="Chromatin Region") + scale_fill_brewer(palette="Paired")

Expand here to see past versions of unnamed-chunk-21-1.png:
Version Author Date
2ec5ffd Briana Mittleman 2018-11-07

Enrichment is the actual/random:

perChrommHMM_nuc_withPerm_enrich = perChrommHMM_nuc_withPerm %>% mutate(Nuclear_Enrichment=(Nuclear_QTLs-Random_perm)/Random_perm, chiSq=(Nuclear_QTLs-Random_perm)^2/Random_perm)

ggplot(perChrommHMM_nuc_withPerm_enrich, aes(x=name, y=Nuclear_Enrichment)) + geom_bar(stat="identity",fill="deepskyblue3")+ theme(axis.text.x = element_text(angle = 90, hjust = 1)) + labs(title="ChromHMM Enrichment of Nuclear ApaQTLs \n over 824 Random Permuations", x="Region")

Expand here to see past versions of unnamed-chunk-22-1.png:
Version Author Date
2ec5ffd Briana Mittleman 2018-11-07

ggplot(perChrommHMM_nuc_withPerm_enrich, aes(x=name, y=chiSq)) + geom_bar(stat="identity",fill="deepskyblue3")+ theme(axis.text.x = element_text(angle = 90, hjust = 1)) + labs(title="ChromHMM ChiSq of Nuclear ApaQTLs \n over 824 Random Permuations", x="Region") 

Expand here to see past versions of unnamed-chunk-22-2.png:
Version Author Date
2ec5ffd Briana Mittleman 2018-11-07

To parallelize this I will run the permutations in 4 bash scripts:

nuc_random880_chromHmm_set1.sh

#!/bin/bash

#SBATCH --job-name=nuc_random880_chromHmm_set1
#SBATCH --account=pi-yangili1
#SBATCH --time=24:00:00
#SBATCH --output=nuc_random880_chromHmm_set1.out
#SBATCH --error=nuc_random880_chromHmm_set1.err
#SBATCH --partition=bigmem2
#SBATCH --mem=100G
#SBATCH --mail-type=END

module load Anaconda3
source activate three-prime-env
#make random 
for i in {1..250};
do
shuf -n 880 /project2/gilad/briana/threeprimeseq/data/nominal_APAqtl_trans/filtered_APApeaks_merged_allchrom_refseqGenes_pheno_Nuclear_NomRes.txt > /project2/gilad/briana/threeprimeseq/data/random_QTLsnps/Nuclear/randomRes_Nuclear_880_${i}.txt
done

nuc_random880_chromHmm_set2.sh

#!/bin/bash

#SBATCH --job-name=nuc_random880_chromHmm_set2
#SBATCH --account=pi-yangili1
#SBATCH --time=24:00:00
#SBATCH --output=nuc_random880_chromHmm_set2.out
#SBATCH --error=nuc_random880_chromHmm_set2.err
#SBATCH --partition=bigmem2
#SBATCH --mem=200G
#SBATCH --mail-type=END

module load Anaconda3
source activate three-prime-env
#make random 
for i in {251..500};
do
shuf -n 880 /project2/gilad/briana/threeprimeseq/data/nominal_APAqtl_trans/filtered_APApeaks_merged_allchrom_refseqGenes_pheno_Nuclear_NomRes.txt > /project2/gilad/briana/threeprimeseq/data/random_QTLsnps/Nuclear/randomRes_Nuclear_880_${i}.txt
done

nuc_random880_chromHmm_set3.sh

#!/bin/bash

#SBATCH --job-name=nuc_random880_chromHmm_set3
#SBATCH --account=pi-yangili1
#SBATCH --time=24:00:00
#SBATCH --output=nuc_random880_chromHmm_set3.out
#SBATCH --error=nuc_random880_chromHmm_set3.err
#SBATCH --partition=bigmem2
#SBATCH --mem=200G
#SBATCH --mail-type=END

module load Anaconda3
source activate three-prime-env
#make random 
for i in {501..750};
do
shuf -n 880 /project2/gilad/briana/threeprimeseq/data/nominal_APAqtl_trans/filtered_APApeaks_merged_allchrom_refseqGenes_pheno_Nuclear_NomRes.txt > /project2/gilad/briana/threeprimeseq/data/random_QTLsnps/Nuclear/randomRes_Nuclear_880_${i}.txt
done

nuc_random880_chromHmm_set4.sh

#!/bin/bash

#SBATCH --job-name=nuc_random880_chromHmm_set4
#SBATCH --account=pi-yangili1
#SBATCH --time=24:00:00
#SBATCH --output=nuc_random880_chromHmm_set4.out
#SBATCH --error=nuc_random880_chromHmm_set4.err
#SBATCH --partition=bigmem2
#SBATCH --mem=200G
#SBATCH --mail-type=END

module load Anaconda3
source activate three-prime-env
#make random 
for i in {751..1000};
do
shuf -n 880 /project2/gilad/briana/threeprimeseq/data/nominal_APAqtl_trans/filtered_APApeaks_merged_allchrom_refseqGenes_pheno_Nuclear_NomRes.txt > /project2/gilad/briana/threeprimeseq/data/random_QTLsnps/Nuclear/randomRes_Nuclear_880_${i}.txt
done

Same for total:

total_random118_chromHmm_set1.sh

#!/bin/bash

#SBATCH --job-name=total_random118_chromHmm_set1
#SBATCH --account=pi-yangili1
#SBATCH --time=36:00:00
#SBATCH --output=total_random118_chromHmm_set1.out
#SBATCH --error=total_random118_chromHmm_set1.err
#SBATCH --partition=bigmem2
#SBATCH --mem=200G
#SBATCH --mail-type=END

module load Anaconda3
source activate three-prime-env


#test with 2 permutations then make it 1000  
#choose random res
for i in {1..250};
do
shuf -n 118 /project2/gilad/briana/threeprimeseq/data/nominal_APAqtl_trans/filtered_APApeaks_merged_allchrom_refseqGenes_pheno_Total_NomRes.txt > /project2/gilad/briana/threeprimeseq/data/random_QTLsnps/Total/randomRes_Total_118_${i}.txt
done

total_random118_chromHmm_set2.sh

#!/bin/bash

#SBATCH --job-name=total_random118_chromHmm_set2
#SBATCH --account=pi-yangili1
#SBATCH --time=36:00:00
#SBATCH --output=total_random118_chromHmm_set2.out
#SBATCH --error=total_random118_chromHmm_set2.err
#SBATCH --partition=bigmem2
#SBATCH --mem=200G
#SBATCH --mail-type=END

module load Anaconda3
source activate three-prime-env


#test with 2 permutations then make it 1000  
#choose random res
for i in {251..500};
do
shuf -n 118 /project2/gilad/briana/threeprimeseq/data/nominal_APAqtl_trans/filtered_APApeaks_merged_allchrom_refseqGenes_pheno_Total_NomRes.txt > /project2/gilad/briana/threeprimeseq/data/random_QTLsnps/Total/randomRes_Total_118_${i}.txt
done

total_random118_chromHmm_set4.sh

#!/bin/bash

#SBATCH --job-name=total_random118_chromHmm_set4
#SBATCH --account=pi-yangili1
#SBATCH --time=36:00:00
#SBATCH --output=total_random118_chromHmm_set4.out
#SBATCH --error=total_random118_chromHmm_set4.err
#SBATCH --partition=bigmem2
#SBATCH --mem=200G
#SBATCH --mail-type=END

module load Anaconda3
source activate three-prime-env


#test with 2 permutations then make it 1000  
#choose random res
for i in {751..1000};
do
shuf -n 118 /project2/gilad/briana/threeprimeseq/data/nominal_APAqtl_trans/filtered_APApeaks_merged_allchrom_refseqGenes_pheno_Total_NomRes.txt > /project2/gilad/briana/threeprimeseq/data/random_QTLsnps/Total/randomRes_Total_118_${i}.txt
done

I want to turn each of these into snp files:

randomLines2Snp.sh

#!/bin/bash

#SBATCH --job-name=randomLines2Snp
#SBATCH --account=pi-yangili1
#SBATCH --time=36:00:00
#SBATCH --output=randomLines2Snp.out
#SBATCH --error=randomLines2Snp.err
#SBATCH --partition=broadwl
#SBATCH --mem=50G
#SBATCH --mail-type=END

module load Anaconda3
source activate three-prime-env


#make random 
for i in {1..1000};
do
python randomRes2SNPbed.py Nuclear 880 ${i} 
done 

#make random 
for i in {1..1000};
do
python randomRes2SNPbed.py Total 118 ${i}
done 

Next step is the overlap. I want this to run on each seperatly.

sortRandomSnps.sh

#!/bin/bash

#SBATCH --job-name=sortRandomSnps
#SBATCH --account=pi-yangili1
#SBATCH --time=36:00:00
#SBATCH --output=sortRandomSnps.out
#SBATCH --error=sortRandomSnps.err
#SBATCH --partition=broadwl
#SBATCH --mem=50G
#SBATCH --mail-type=END

module load Anaconda3
source activate three-prime-env


for i in $(ls /project2/gilad/briana/threeprimeseq/data/random_QTLsnps/Nuclear/snp_bed/);
do
sort -k1,1 -k2,2n /project2/gilad/briana/threeprimeseq/data/random_QTLsnps/Nuclear/snp_bed/$i > /project2/gilad/briana/threeprimeseq/data/random_QTLsnps/Nuclear/snp_bed_sort/$i.sort.bed
done

for i in $(ls /project2/gilad/briana/threeprimeseq/data/random_QTLsnps/Total/snp_bed/);
do
sort -k1,1 -k2,2n /project2/gilad/briana/threeprimeseq/data/random_QTLsnps/Total/snp_bed/$i > /project2/gilad/briana/threeprimeseq/data/random_QTLsnps/Total/snp_bed_sort/$i.sort.bed
done

Rewrite overlap with ChromHMM script to do it on each file seperatly.

overlap_chromHMM_sepfiles.py

def main(inFile, outFile):
  rand=pybedtools.BedTool(inFile) 
  hmm=pybedtools.BedTool("/project2/gilad/briana/genome_anotation_data/GM12878.chromHMM.sort.bed")
  #map hmm to snps
  Rand_overlapHMM=rand.map(hmm, c=4)
  #save results
  Rand_overlapHMM.saveas(outFile)


if __name__ == "__main__":
    import sys
    import pandas as pd
    import pybedtools
    fraction=sys.argv[1]
    nsamp=sys.argv[2]
    niter=sys.argv[3]
    #which itteration we are on 
    inFile ="/project2/gilad/briana/threeprimeseq/data/random_QTLsnps/%s/snp_bed_sort/randomRes_%s_%s_%s.bed.sort.bed"%(fraction,fraction, nsamp, iter)
    outFile= "/project2/gilad/briana/threeprimeseq/data/random_QTLsnps/%s/chromHMM_overlap/randomres_overlapChromHMM_%s_%s_%s.txt"%(fraction,fraction,nsamp, niter)
    main(inFile,outFile)

overlap_chromHMM_sepfiles.sh

#!/bin/bash

#SBATCH --job-name=overlap_chromHMM_sepfiles
#SBATCH --account=pi-yangili1
#SBATCH --time=36:00:00
#SBATCH --output=overlap_chromHMM_sepfiles.out
#SBATCH --error=overlap_chromHMM_sepfiles.err
#SBATCH --partition=broadwl
#SBATCH --mem=50G
#SBATCH --mail-type=END

module load Anaconda3
source activate three-prime-env

for i in {1..1000};
do
python overlap_chromHMM_sepfiles.py  Nuclear 880 $i
done

for i in {1..1000};
do
python overlap_chromHMM_sepfiles.py  Total 118 $i
done

I will next make an R script that will take in each file and perform the groupby command to get the number of snps in each group.

groupRandomByChromHMM.R

#!/bin/rscripts

# usage: groupRandomByChromHMM.R -f infile -o outfile 

#this file will take any of the itterations and output a file with chrom hmm number, name, numberof snps

library(optparse)
library(dplyr)
library(tidyr)
library(ggplot2)
library(readr)

option_list = list(
  make_option(c("-f", "--file"), action="store", default=NA, type='character',
              help="input coverage file"),
  make_option(c("-o", "--output"), action="store", default=NA, type='character',
              help="output file")
)

opt_parser <- OptionParser(option_list=option_list)
opt <- parse_args(opt_parser)


#interrupt execution if no file is  supplied
if (is.null(opt$file)){
  print_help(opt_parser)
  stop("Need input file", call.=FALSE)
}
if (is.null(opt$output)){
  print_help(opt_parser)
  stop("Need output file", call.=FALSE)
}

randomSNPS=read.table(opt$file, col.names=c("chrom", "start", "end", "sid", "significance", "strand", "number"),stringsAsFactors = F, na.strings = "NA")
hmm_names=read.table("/project2/gilad/briana/genome_anotation_data/chromHMM_regions.txt", col.names = c("number", "name"),stringsAsFactors=F)
randomSNPS$number=as.integer(as.factor(randomSNPS$number))
randomSNPS_names= randomSNPS  %>% left_join(hmm_names, by="number")
#split the name of the file to get the iteration number
fileSplit=strsplit(opt$file, "/")[[1]][10]
iter.txt=strsplit(fileSplit, "_")[[1]][5]
iter=substr(iter.txt, 1, nchar(iter.txt)-4) 

randomSNPS_names_grouped=randomSNPS_names %>%  group_by(number) %>% summarise(!!iter:=n()) %>%  replace_na(list(name="No_annotation")) %>%  dplyr::select(number, !!iter) 
hmm_names$number=as.character(hmm_names$number)
final=hmm_names %>% left_join(randomSNPS_names_grouped,by="number")

write.table(final,opt$output,quote=FALSE, col.names = T, row.names = F)

groupRandomChromHMM.sh

#!/bin/bash

#SBATCH --job-name=groupRandomChromHMM
#SBATCH --account=pi-yangili1
#SBATCH --time=36:00:00
#SBATCH --output=groupRandomChromHMM.out
#SBATCH --error=groupRandomChromHMM.err
#SBATCH --partition=broadwl
#SBATCH --mem=50G
#SBATCH --mail-type=END


module load Anaconda3
source activate three-prime-env

for i in {1..1000};
do
Rscript groupRandomByChromHMM.R -f /project2/gilad/briana/threeprimeseq/data/random_QTLsnps/Nuclear/chromHMM_overlap/randomres_overlapChromHMM_Nuclear_880_${i}.txt -o /project2/gilad/briana/threeprimeseq/data/random_QTLsnps/Nuclear/chromHMM_overlap_group/randomres_overlapChromHMM_Nuclear_880_${i}_grouped.txt
done

for i in {1..1000};
do
Rscript groupRandomByChromHMM.R -f /project2/gilad/briana/threeprimeseq/data/random_QTLsnps/Total/chromHMM_overlap/randomres_overlapChromHMM_Total_118_${i}.txt -o /project2/gilad/briana/threeprimeseq/data/random_QTLsnps/Total/chromHMM_overlap_group/randomres_overlapChromHMM_Total_118_${i}_grouped.txt
done

Once I have the results I will paste the third column of each file together

cut -d$' ' -f 1,2 randomres_overlapChromHMM_Nuclear_880_1_grouped.txt > Nuc_chromOverlap.txt

for i in {1..1000};
do
paste -d" " Nuc_chromOverlap.txt <(cut -d" " -f 3 randomres_overlapChromHMM_Nuclear_880_${i}_grouped.txt) > tmp
mv tmp Nuc_chromOverlap.txt
done


cut -d$' ' -f 1,2 randomres_overlapChromHMM_Total_118_99_grouped.txt> Tot_chromOverlap.txt

for i in {1..1000};
do
paste -d" " Tot_chromOverlap.txt <(cut -d" " -f 3 randomres_overlapChromHMM_Total_118_${i}_grouped.txt) > tmp
mv tmp Tot_chromOverlap.txt
done

There will be NAs in this file. I will turn them into 0s when I bring it in R.

Pull files onto computer:

/project2/gilad/briana/threeprimeseq/data/random_QTLsnps/Nuclear/chromHMM_overlap_group/Nuc_chromOverlap.txt /project2/gilad/briana/threeprimeseq/data/random_QTLsnps/Total/chromHMM_overlap_group/Tot_chromOverlap.txt

regions=c('Txn_Elongation','Weak_Txn','Repressed','Heterochrom/lo','Repetitive/CNV1','Repetitive/CNV2','Active_Promoter','Weak_Promoter','Poised_Promoter','Strong_Enhancer1','Strong_Enhancer2','Weak_Enhancer1','Weak_Enhancer2','Insulator','Txn_Transition')


permutationResTotal=read.table("../data/ChromHmmOverlap/Tot_chromOverlap.txt", header=T, stringsAsFactors = F)
permutationResTotal[is.na(permutationResTotal)] <- 0
permutationResTotal= as_data_frame(permutationResTotal)
permutationResTotal_noName=permutationResTotal[,3:ncol(permutationResTotal)]
totRand_mean=rowMeans(permutationResTotal_noName)/1000

permutationResNuclear=read.table("../data/ChromHmmOverlap/Nuc_chromOverlap.txt",header = T,stringsAsFactors = F)
permutationResNuclear[is.na(permutationResNuclear)] <- 0
permutationResNuclear_noName=permutationResNuclear[,3:ncol(permutationResNuclear)]
nucRand_mean=rowMeans(permutationResNuclear_noName)/1000
allRand_mean_df= data.frame(cbind(regions,totRand_mean, nucRand_mean))

allRand_mean_df_melt=melt(allRand_mean_df, id.vars="regions")
Warning: attributes are not identical across measure variables; they will
be dropped
allRand_mean_df_melt$value= as.numeric(allRand_mean_df_melt$value)
ggplot(allRand_mean_df_melt, aes(y=value, x=regions, by=variable, fill=variable))+ geom_histogram(stat="identity", position="dodge") + theme(axis.text.x = element_text(angle = 90, hjust = 1))
Warning: Ignoring unknown parameters: binwidth, bins, pad

Expand here to see past versions of unnamed-chunk-38-1.png:
Version Author Date
19b98b3 Briana Mittleman 2018-11-07

I want to look at specific distributions:

permutationResTotal_melt= melt(permutationResTotal, id.vars=c("number", "name"))
ggplot(permutationResTotal_melt, aes(x=value,fill=name)) + geom_histogram(bins=50) + facet_wrap(~number) + labs(x="N random Snps in category", title="Random permutation Total")

Expand here to see past versions of unnamed-chunk-40-1.png:
Version Author Date
19b98b3 Briana Mittleman 2018-11-07

For nuclear:

permutationResNuclear_melt= melt(permutationResNuclear, id.vars=c("number", "name"))
ggplot(permutationResNuclear_melt, aes(x=value,fill=name)) + geom_histogram(bins=50) + facet_wrap(~number) + labs(x="N random Snps in category", title="Random permutation Nuclear")

Expand here to see past versions of unnamed-chunk-42-1.png:
Version Author Date
19b98b3 Briana Mittleman 2018-11-07

Try log scale:

I want to add horizontal line where the actual QTL number is.

ggplot(permutationResTotal_melt, aes(x=value,fill=name)) + geom_histogram(bins=50) + facet_wrap(~number) + scale_y_log10() + labs(x="random Snps in category", title="Random permutation Total")
Warning: Transformation introduced infinite values in continuous y-axis
Warning: Removed 448 rows containing missing values (geom_bar).

Expand here to see past versions of unnamed-chunk-43-1.png:
Version Author Date
83f1b14 Briana Mittleman 2018-11-08
19b98b3 Briana Mittleman 2018-11-07

ggplot(permutationResNuclear_melt, aes(x=value,fill=name)) + geom_histogram(bins=50) + facet_wrap(~number) + scale_y_log10()+ labs(x="random Snps in category", title="Random permutation Nuclear")
Warning: Transformation introduced infinite values in continuous y-axis
Warning: Removed 631 rows containing missing values (geom_bar).

Expand here to see past versions of unnamed-chunk-44-1.png:
Version Author Date
83f1b14 Briana Mittleman 2018-11-08
19b98b3 Briana Mittleman 2018-11-07

Try removing 0s:

permutationResTotal_melt_no0= permutationResTotal_melt %>% filter(value>0)
ggplot(permutationResTotal_melt_no0, aes(x=value,fill=name)) + geom_histogram(bins=50) + facet_wrap(~number)+ scale_y_log10()+ labs(x="random Snps in category", title="Random permutation Total")
Warning: Transformation introduced infinite values in continuous y-axis
Warning: Removed 407 rows containing missing values (geom_bar).

Expand here to see past versions of unnamed-chunk-45-1.png:
Version Author Date
83f1b14 Briana Mittleman 2018-11-08
19b98b3 Briana Mittleman 2018-11-07

permutationResNuclear_melt_no0= permutationResNuclear_melt %>% filter(value>0)
ggplot(permutationResNuclear_melt_no0, aes(x=value,fill=name)) + geom_histogram(bins=50) + facet_wrap(~number)+ scale_y_log10()+ labs(x="random Snps in category", title="Random permutation Nuclear")
Warning: Transformation introduced infinite values in continuous y-axis
Warning: Removed 630 rows containing missing values (geom_bar).

Expand here to see past versions of unnamed-chunk-45-2.png:
Version Author Date
83f1b14 Briana Mittleman 2018-11-08
19b98b3 Briana Mittleman 2018-11-07

Look at enrichment by using the average

TotalPermMean=permutationResTotal_melt %>% group_by(number) %>% summarise(TotRandPerm=mean(value))
TotalPermMean$number=as.character(TotalPermMean$number)
NuclearPermMean=permutationResNuclear_melt %>% group_by(number) %>% summarise(NucRandPerm=mean(value))
NuclearPermMean$number=as.character(NuclearPermMean$number)

Melt SNP values by name and number to get data in same format:

TotalOverlapHMM_names_melt=melt(TotalOverlapHMM_names, id.vars=c("number", "name"))%>% filter(variable=="sid") %>% group_by(number) %>% summarise(TotalQTL=n())
Warning: attributes are not identical across measure variables; they will
be dropped
TotalOverlapHMM_names_melt$number=as.character(TotalOverlapHMM_names_melt$number)
NuclearOverlapHMM_names_melt=melt(NuclearOverlapHMM_names, id.vars=c("number", "name")) %>% filter(variable=="sid") %>% group_by(number) %>% summarise(NucQTL=n())
Warning: attributes are not identical across measure variables; they will
be dropped
NuclearOverlapHMM_names_melt$number=as.character(NuclearOverlapHMM_names_melt$number)
chromHmm$number=as.character(chromHmm$number)
TotalOverlapHMM_enrichment= TotalOverlapHMM_names_melt %>% full_join(TotalPermMean, by="number") %>%  replace_na(list(TotalQTL=.00001)) %>% full_join(chromHmm, by="number")

TotalOverlapHMM_enrichment$TotalQTL=as.double(TotalOverlapHMM_enrichment$TotalQTL)
TotalOverlapHMM_enrichment = TotalOverlapHMM_enrichment %>% mutate(TotEnrich=(TotalQTL-TotRandPerm)/TotRandPerm)

NuclearOverlapHMM_enrichment=NuclearOverlapHMM_names_melt %>% full_join(NuclearPermMean, by="number")%>% full_join(chromHmm, by="number")

NuclearOverlapHMM_enrichment$NucQTL=as.double(NuclearOverlapHMM_enrichment$NucQTL)

NuclearOverlapHMM_enrichment=NuclearOverlapHMM_enrichment %>%mutate(NucEnrich=(NucQTL-NucRandPerm)/NucRandPerm)
ggplot(NuclearOverlapHMM_enrichment, aes(y=NucEnrich, x=number, fill=name)) + geom_bar(stat="identity")

Expand here to see past versions of unnamed-chunk-49-1.png:
Version Author Date
83f1b14 Briana Mittleman 2018-11-08

ggplot(TotalOverlapHMM_enrichment, aes(y=TotEnrich, x=number, fill=name)) + geom_bar(stat="identity")

Expand here to see past versions of unnamed-chunk-49-2.png:
Version Author Date
83f1b14 Briana Mittleman 2018-11-08

Join together:

bothEnrich=NuclearOverlapHMM_enrichment %>% full_join(TotalOverlapHMM_enrichment, by=c("name", "number")) %>% select(number, name, NucEnrich,TotEnrich)

bothEnrich_melt=melt(bothEnrich, id.vars=c("number", "name"))
ggplot(bothEnrich_melt, aes(x=number, by=variable, fill=name, y=value,col=variable)) + geom_bar(position = "dodge", stat = "identity",alpha=.5) + scale_color_manual(values=c("darkviolet", "deepskyblue3")) + labs(y="Enrichment from 1000 permutations", title="ChromHMM enrichment for \nTotal and Nuclear ApaQTLs",x="Region")

Expand here to see past versions of unnamed-chunk-51-1.png:
Version Author Date
83f1b14 Briana Mittleman 2018-11-08

Look only at the interesting ones by subsetting:

bothEnrich_melt_filt=bothEnrich_melt %>% filter(str_detect(name,"Active_Promoter|Txn_Elongation|Weak_Txn|Heterochrom/lo|Weak_Promoter|Poised_Promoter|Txn_Transition"))


ggplot(bothEnrich_melt_filt, aes(x=name, by=variable, fill=variable, y=value))+ geom_bar(position = "dodge", stat = "identity") + scale_fill_manual(values=c("deepskyblue3","darkviolet")) + theme(axis.text.x = element_text(angle = 90, hjust = 1)) + labs(y="Enrichment", x="Category", title="ChromHMM categroies \n with oppositte Enrichemtn patterns")

Expand here to see past versions of unnamed-chunk-52-1.png:
Version Author Date
83f1b14 Briana Mittleman 2018-11-08

The bimodal distributions may come from including both the significant and non significant genes in the test set. I need to remove all of the lines that come from a gene with a significant peak.

Remove significant genes

NucQTL_genes=read.table("../data/perm_QTL_trans/filtered_APApeaks_merged_allchrom_refseqGenes_pheno_Nuclear_transcript_permResBH.txt", stringsAsFactors = F, header=T)  %>% mutate(sig=ifelse(-log10(bh)>=1, 1,0 )) %>%  separate(pid, sep = ":", into=c("chr", "start", "end", "id")) %>% separate(id, sep = "_", into=c("gene", "strand", "peak")) %>% filter(sig==1) %>% select(gene) %>% distinct(gene)
#715 genes  
#write this out as NucAPAGenes
write.table(NucQTL_genes, "../data/perm_QTL_trans/NucApaGenes.txt", row.names = F, col.names = F, quote=F)

TotQTL_genes=read.table("../data/perm_QTL_trans/filtered_APApeaks_merged_allchrom_refseqGenes_pheno_Total_transcript_permResBH.txt", stringsAsFactors = F, header=T)  %>% mutate(sig=ifelse(-log10(bh)>=1, 1,0 )) %>%  separate(pid, sep = ":", into=c("chr", "start", "end", "id")) %>% separate(id, sep = "_", into=c("gene", "strand", "peak")) %>% filter(sig==1) %>% select(gene) %>% distinct(gene)
#106 genes
#write out as TotAPAGenes

write.table(TotQTL_genes, "../data/perm_QTL_trans/TotApaGenes.txt", row.names = F, col.names = F, quote=F)

I need to find a way to get rid of these from the files I cam pulling from.

/project2/gilad/briana/threeprimeseq/data/nominal_APAqtl_trans/filtered_APApeaks_merged_allchrom_refseqGenes_pheno_Nuclear_NomRes.txt

/project2/gilad/briana/threeprimeseq/data/nominal_APAqtl_trans/filtered_APApeaks_merged_allchrom_refseqGenes_pheno_Total_NomRes.txt

I can create an python script to do this. I will need to seperate the first column and and only write the line out if the gene is in the apaGenes files I just created.

filterSigGenes.py

#python 

#genes with sig ApaQTL
TotGenes=open("/project2/gilad/briana/threeprimeseq/data/random_QTLsnps/sig_genes/TotApaGenes.txt", "r")
NucGenes=open("/project2/gilad/briana/threeprimeseq/data/random_QTLsnps/sig_genes/NucApaGenes.txt", "r")

#nom res (with all snps tested)  
NucRes=open("/project2/gilad/briana/threeprimeseq/data/nominal_APAqtl_trans/filtered_APApeaks_merged_allchrom_refseqGenes_pheno_Nuclear_NomRes.txt", "r")
TotRes=open("/project2/gilad/briana/threeprimeseq/data/nominal_APAqtl_trans/filtered_APApeaks_merged_allchrom_refseqGenes_pheno_Total_NomRes.txt", "r")

#output files:
Nuc_nonSig=open("/project2/gilad/briana/threeprimeseq/data/random_QTLsnps/nomRes_nonsig/NucTestedSnps_nonSigGenes.txt", "w")
Tot_nonSig=open("/project2/gilad/briana/threeprimeseq/data/random_QTLsnps/nomRes_nonsig/TotTestedSnps_nonSigGenes.txt", "w")

#convert genes to list
def file_to_list(file):
    gene_list=[]
    for ln in file:
      gene=ln.strip()
      gene_list.append(gene)
    return(gene_list)
    
Tot_gene_list=file_to_list(TotGenes)
Nuc_gene_list=file_to_list(NucGenes)  

#function that will take in the input, the list, and the output. I want to be able to run this function for total and nuclear  


def filter(fin,fout, sigGenes):
  for ln in fin:
    gene=ln.split()[0].split(":")[3].split("_")[0]
    if gene not in sigGenes:
      fout.write(ln)
  fout.close()


filter(NucRes,Nuc_nonSig,Nuc_gene_list)
filter(TotRes, Tot_nonSig, Tot_gene_list)

Call this in a bash script:
run_filterSigGenes.sh

#!/bin/bash

#SBATCH --job-name=run_filterSigGenes
#SBATCH --account=pi-yangili1
#SBATCH --time=36:00:00
#SBATCH --output=run_filterSigGenes.out
#SBATCH --error=run_filterSigGenes.err
#SBATCH --partition=broadwl
#SBATCH --mem=50G
#SBATCH --mail-type=END


module load Anaconda3
source activate three-prime-env


python filterSigGenes.py

nuc_random880_chromHmm_noSig_set1.sh

#!/bin/bash

#SBATCH --job-name=nuc_random880_chromHmm_noSig_set1
#SBATCH --account=pi-yangili1
#SBATCH --time=24:00:00
#SBATCH --output=nuc_random880_chromHmm_noSig_set1.out
#SBATCH --error=nuc_random880_chromHmm_noSig_set1.err
#SBATCH --partition=bigmem2
#SBATCH --mem=100G
#SBATCH --mail-type=END

module load Anaconda3
source activate three-prime-env
#make random 
for i in {1..250};
do
shuf -n 880 /project2/gilad/briana/threeprimeseq/data/random_QTLsnps/nomRes_nonsig/NucTestedSnps_nonSigGenes.txt > /project2/gilad/briana/threeprimeseq/data/random_QTLsnps/Nuclear_noSig/randomRes_Nuclear_880_noSig_${i}.txt
done

nuc_random880_chromHmm_noSig_set2.sh

#!/bin/bash

#SBATCH --job-name=nuc_random880_chromHmm_noSig_set2
#SBATCH --account=pi-yangili1
#SBATCH --time=24:00:00
#SBATCH --output=nuc_random880_chromHmm_noSig_set2.out
#SBATCH --error=nuc_random880_chromHmm_noSig_set2.err
#SBATCH --partition=bigmem2
#SBATCH --mem=200G
#SBATCH --mail-type=END

module load Anaconda3
source activate three-prime-env
#make random 
for i in {251..500};
do
shuf -n 880 /project2/gilad/briana/threeprimeseq/data/random_QTLsnps/nomRes_nonsig/NucTestedSnps_nonSigGenes.txt > /project2/gilad/briana/threeprimeseq/data/random_QTLsnps/Nuclear_noSig/randomRes_Nuclear_880_noSig_${i}.txt
done

nuc_random880_chromHmm_noSig_set3.sh

#!/bin/bash

#SBATCH --job-name=nuc_random880_chromHmm_noSig_set3
#SBATCH --account=pi-yangili1
#SBATCH --time=24:00:00
#SBATCH --output=nuc_random880_chromHmm_noSig_set3.out
#SBATCH --error=nuc_random880_chromHmm_noSig_set3.err
#SBATCH --partition=bigmem2
#SBATCH --mem=200G
#SBATCH --mail-type=END

module load Anaconda3
source activate three-prime-env
#make random 
for i in {501..750};
do
shuf -n 880 /project2/gilad/briana/threeprimeseq/data/random_QTLsnps/nomRes_nonsig/NucTestedSnps_nonSigGenes.txt > /project2/gilad/briana/threeprimeseq/data/random_QTLsnps/Nuclear_noSig/randomRes_Nuclear_880_noSig_${i}.txt
done

nuc_random880_chromHmm_noSig_set4.sh

#!/bin/bash

#SBATCH --job-name=nuc_random880_chromHmm_noSig_set4
#SBATCH --account=pi-yangili1
#SBATCH --time=24:00:00
#SBATCH --output=nuc_random880_chromHmm_noSig_set4.out
#SBATCH --error=nuc_random880_chromHmm_noSig_set4.err
#SBATCH --partition=bigmem2
#SBATCH --mem=200G
#SBATCH --mail-type=END

module load Anaconda3
source activate three-prime-env
#make random 
for i in {751..1000};
do
shuf -n 880 /project2/gilad/briana/threeprimeseq/data/random_QTLsnps/nomRes_nonsig/NucTestedSnps_nonSigGenes.txt > /project2/gilad/briana/threeprimeseq/data/random_QTLsnps/Nuclear_noSig/randomRes_Nuclear_880_noSig_${i}.txt
done

Same for total:

total_random118_chromHmm_noSig_set1.sh

#!/bin/bash

#SBATCH --job-name=total_random118_chromHmm_noSig_set1
#SBATCH --account=pi-yangili1
#SBATCH --time=36:00:00
#SBATCH --output=total_random118_chromHmm_noSig_set1.out
#SBATCH --error=total_random118_chromHmm_noSig_set1.err
#SBATCH --partition=bigmem2
#SBATCH --mem=200G
#SBATCH --mail-type=END

module load Anaconda3
source activate three-prime-env


#test with 2 permutations then make it 1000  
#choose random res
for i in {1..250};
do
shuf -n 118 /project2/gilad/briana/threeprimeseq/data/random_QTLsnps/nomRes_nonsig/TotTestedSnps_nonSigGenes.txt > /project2/gilad/briana/threeprimeseq/data/random_QTLsnps/Total_noSig/randomRes_Total_118_noSig_${i}.txt
done

total_random118_chromHmm_noSig_set2.sh

#!/bin/bash

#SBATCH --job-name=total_random118_chromHmm_noSig_set2
#SBATCH --account=pi-yangili1
#SBATCH --time=36:00:00
#SBATCH --output=total_random118_chromHmm_noSig_set2.out
#SBATCH --error=total_random118_chromHmm_noSig_set2.err
#SBATCH --partition=bigmem2
#SBATCH --mem=200G
#SBATCH --mail-type=END

module load Anaconda3
source activate three-prime-env


#test with 2 permutations then make it 1000  
#choose random res
for i in {251..500};
do
shuf -n 118 /project2/gilad/briana/threeprimeseq/data/random_QTLsnps/nomRes_nonsig/TotTestedSnps_nonSigGenes.txt > /project2/gilad/briana/threeprimeseq/data/random_QTLsnps/Total_noSig/randomRes_Total_118_noSig_${i}.txt
done

total_random118_chromHmm_noSig_set3.sh

#!/bin/bash

#SBATCH --job-name=total_random118_chromHmm_noSig_set3
#SBATCH --account=pi-yangili1
#SBATCH --time=36:00:00
#SBATCH --output=total_random118_chromHmm_noSig_set3.out
#SBATCH --error=total_random118_chromHmm_noSig_set3.err
#SBATCH --partition=bigmem2
#SBATCH --mem=200G
#SBATCH --mail-type=END

module load Anaconda3
source activate three-prime-env


#test with 2 permutations then make it 1000  
#choose random res
for i in {501..750};
do
shuf -n 118 /project2/gilad/briana/threeprimeseq/data/random_QTLsnps/nomRes_nonsig/TotTestedSnps_nonSigGenes.txt > /project2/gilad/briana/threeprimeseq/data/random_QTLsnps/Total_noSig/randomRes_Total_118_noSig_${i}.txt
done

total_random118_chromHmm_noSig_set4.sh

#!/bin/bash

#SBATCH --job-name=total_random118_chromHmm_noSig_set4
#SBATCH --account=pi-yangili1
#SBATCH --time=36:00:00
#SBATCH --output=total_random118_chromHmm_noSig_set4.out
#SBATCH --error=total_random118_chromHmm_noSig_set4.err
#SBATCH --partition=bigmem2
#SBATCH --mem=200G
#SBATCH --mail-type=END

module load Anaconda3
source activate three-prime-env


#test with 2 permutations then make it 1000  
#choose random res
for i in {751..1000};
do
shuf -n 118 /project2/gilad/briana/threeprimeseq/data/random_QTLsnps/nomRes_nonsig/TotTestedSnps_nonSigGenes.txt > /project2/gilad/briana/threeprimeseq/data/random_QTLsnps/Total_noSig/randomRes_Total_118_noSig_${i}.txt
done

This may not be enough. I may need to change this so it only has uniq snp. I could be sampling the same snps over an over.

Make these files into snp bed files:

randomRes2SNPbed_noSig.py

def main(inFile, outFile):
    fout=open(outFile, "w")
    fin=open(inFile, "r")
    for ln in fin:
          pid, sid, dist, pval, slope = ln.split()
          chrom, pos= sid.split(":")
          name=sid
          start= int(pos)-1
          end=int(pos)
          strand=pid.split(":")[3].split("_")[1]
          pval=float(pval)
          fout.write("%s\t%s\t%s\t%s\t%s\t%s\n"%(chrom, start, end, name, pval, strand))
    fout.close()

if __name__ == "__main__":
    import sys
    fraction=sys.argv[1]
    nsamp=sys.argv[2]
    nsamp=int(nsamp)
    iter=sys.argv[3]
    inFile = "/project2/gilad/briana/threeprimeseq/data/random_QTLsnps/%s_noSig/randomRes_%s_%d_noSig_%s.txt"%(fraction,fraction, nsamp, iter)
    
    outFile= "/project2/gilad/briana/threeprimeseq/data/random_QTLsnps/%s_noSig/snp_bed_noSig/randomRes_%s_%d_noSig_%s.bed"%(fraction,fraction, nsamp, iter)
    main(inFile,outFile)

randomLines2Snp_noSig.sh

#!/bin/bash

#SBATCH --job-name=randomLines2Snp_noSig
#SBATCH --account=pi-gilad
#SBATCH --time=36:00:00
#SBATCH --output=randomLines2Snp_noSig.out
#SBATCH --error=randomLines2Snp_noSig.err
#SBATCH --partition=gilad
#SBATCH --mem=50G
#SBATCH --mail-type=END

module load Anaconda3
source activate three-prime-env


#make random 
for i in {1..1000};
do
python randomRes2SNPbed_noSig.py Nuclear 880 ${i} 
done 

#make random 
for i in {1..1000};
do
python randomRes2SNPbed_noSig.py Total 118 ${i}
done 

sortRandomSnps_noSig.sh

#!/bin/bash

#SBATCH --job-name=sortRandomSnps_noSig
#SBATCH --account=pi-yangili1
#SBATCH --time=10:00:00
#SBATCH --output=sortRandomSnps_noSig.out
#SBATCH --error=sortRandomSnps_noSig.err
#SBATCH --partition=broadwl
#SBATCH --mem=50G
#SBATCH --mail-type=END

module load Anaconda3
source activate three-prime-env


for i in $(ls /project2/gilad/briana/threeprimeseq/data/random_QTLsnps/Nuclear_noSig/snp_bed_noSig/);
do
sort -k1,1 -k2,2n /project2/gilad/briana/threeprimeseq/data/random_QTLsnps/Nuclear_noSig/snp_bed_noSig/$i > /project2/gilad/briana/threeprimeseq/data/random_QTLsnps/Nuclear_noSig/snp_bed_sort_noSig/$i.sort.bed
done

for i in $(ls /project2/gilad/briana/threeprimeseq/data/random_QTLsnps/Total_noSig/snp_bed_noSig/);
do
sort -k1,1 -k2,2n /project2/gilad/briana/threeprimeseq/data/random_QTLsnps/Total_noSig/snp_bed_noSig/$i > /project2/gilad/briana/threeprimeseq/data/random_QTLsnps/Total_noSig/snp_bed_sort_noSig/$i.sort.bed
done

overlap_chromHMM_sepfiles_noSig.py

def main(inFile, outFile):
  rand=pybedtools.BedTool(inFile) 
  hmm=pybedtools.BedTool("/project2/gilad/briana/genome_anotation_data/GM12878.chromHMM.sort.bed")
  #map hmm to snps
  Rand_overlapHMM=rand.map(hmm, c=4)
  #save results
  Rand_overlapHMM.saveas(outFile)


if __name__ == "__main__":
    import sys
    import pandas as pd
    import pybedtools
    fraction=sys.argv[1]
    nsamp=sys.argv[2]
    niter=sys.argv[3]
    #which itteration we are on 
    inFile ="/project2/gilad/briana/threeprimeseq/data/random_QTLsnps/%s_noSig/snp_bed_sort_noSig/randomRes_%s_%s_noSig_%s.bed.sort.bed"%(fraction,fraction, nsamp, niter)

    outFile= "/project2/gilad/briana/threeprimeseq/data/random_QTLsnps/%s_noSig/chromHMM_overlap/randomres_overlapChromHMM_%s_%s_noSig_%s.txt"%(fraction,fraction,nsamp, niter)
    main(inFile,outFile)

overlap_chromHMM_sepfiles_noSig.sh

#!/bin/bash

#SBATCH --job-name=overlap_chromHMM_sepfiles_noSig
#SBATCH --account=pi-yangili1
#SBATCH --time=10:00:00
#SBATCH --output=overlap_chromHMM_sepfiles_noSig.out
#SBATCH --error=overlap_chromHMM_sepfiles_noSig.err
#SBATCH --partition=broadwl
#SBATCH --mem=50G
#SBATCH --mail-type=END

module load Anaconda3
source activate three-prime-env

for i in {1..1000};
do
python overlap_chromHMM_sepfiles_noSig.py  Nuclear 880 $i
done

for i in {1..1000};
do
python overlap_chromHMM_sepfiles_noSig.py  Total 118 $i
done

groupRandomChromHMM_noSig.sh

#!/bin/bash

#SBATCH --job-name=groupRandomChromHMM_noSig
#SBATCH --account=pi-yangili1
#SBATCH --time=5:00:00
#SBATCH --output=groupRandomChromHMM.out
#SBATCH --error=groupRandomChromHMM.err
#SBATCH --partition=broadwl
#SBATCH --mem=50G
#SBATCH --mail-type=END


module load Anaconda3
source activate three-prime-env



for i in {1..1000};
do
Rscript groupRandomByChromHMM.R -f /project2/gilad/briana/threeprimeseq/data/random_QTLsnps/Nuclear_noSig/chromHMM_overlap/randomres_overlapChromHMM_Nuclear_880_noSig_${i}.txt -o /project2/gilad/briana/threeprimeseq/data/random_QTLsnps/Nuclear_noSig/chromHMM_overlap_group/randomres_overlapChromHMM_Nuclear_880_noSig_${i}_grouped.txt
done


for i in {1..1000};
do
Rscript groupRandomByChromHMM.R -f /project2/gilad/briana/threeprimeseq/data/random_QTLsnps/Total_noSig/chromHMM_overlap/randomres_overlapChromHMM_Total_118_noSig_${i}.txt  -o /project2/gilad/briana/threeprimeseq/data/random_QTLsnps/Total_noSig/chromHMM_overlap_group/randomres_overlapChromHMM_Total_118_noSig_${i}_grouped.txt
done
cut -d$' ' -f 1,2 randomres_overlapChromHMM_Nuclear_880_noSig_549_grouped.txt > Nuc_chromOverlap_noSig.txt

for i in {1..1000};
do
paste -d" " Nuc_chromOverlap_noSig.txt <(cut -d" " -f 3 randomres_overlapChromHMM_Nuclear_880_noSig_${i}_grouped.txt) > tmp
mv tmp Nuc_chromOverlap_noSig.txt
done


cut -d$' ' -f 1,2 randomres_overlapChromHMM_Total_118_noSig_53_grouped.txt > Tot_chromOverlap_noSig.txt

for i in {1..1000};
do
paste -d" " Tot_chromOverlap_noSig.txt <(cut -d" " -f 3 randomres_overlapChromHMM_Total_118_noSig_${i}_grouped.txt) > tmp
mv tmp Tot_chromOverlap_noSig.txt
done

These files are not on my computer so I can work with them.

permutationResTotal_noSig=read.table("../data/ChromHmmOverlap/Tot_chromOverlap_noSig.txt", header=T, stringsAsFactors = F)
permutationResTotal_noSig[is.na(permutationResTotal_noSig)] <- 0
permutationResTotal_noSig= as_data_frame(permutationResTotal_noSig)
permutationResTotal_noSig_noName=permutationResTotal_noSig[,3:ncol(permutationResTotal_noSig)]
totRand_mean_noSig=rowMeans(permutationResTotal_noSig_noName)/1000

permutationResNuclear_noSig=read.table("../data/ChromHmmOverlap/Nuc_chromOverlap_noSig.txt",header = T,stringsAsFactors = F)
permutationResNuclear_noSig[is.na(permutationResNuclear_noSig)] <- 0
permutationResNuclear_noSig_noName=permutationResNuclear_noSig[,3:ncol(permutationResNuclear_noSig)]
nucRand_mean_noSig=rowMeans(permutationResNuclear_noSig_noName)/1000
permutationResTotal_noSig_melt= melt(permutationResTotal_noSig, id.vars=c("number", "name"))
ggplot(permutationResTotal_noSig_melt, aes(x=value,fill=name)) + geom_histogram(bins=50) + facet_wrap(~number) + labs(x="N random Snps in category", title="Random permutation Total")

For nuclear:

permutationResNuclear_noSig_melt= melt(permutationResNuclear_noSig, id.vars=c("number", "name"))
ggplot(permutationResNuclear_noSig_melt, aes(x=value,fill=name)) + geom_histogram(bins=50) + facet_wrap(~number) + labs(x="N random Snps in category", title="Random permutation Nuclear")

ggplot(permutationResNuclear_noSig_melt, aes(x=value,fill=name)) + geom_histogram(bins=50) + facet_wrap(~number) + scale_y_log10()+ labs(x="random Snps in category", title="Random permutation Nuclear")
Warning: Transformation introduced infinite values in continuous y-axis
Warning: Removed 630 rows containing missing values (geom_bar).

ggplot(permutationResTotal_noSig_melt, aes(x=value,fill=name)) + geom_histogram(bins=50) + facet_wrap(~number) + scale_y_log10()+ labs(x="random Snps in category", title="Random permutation Total")
Warning: Transformation introduced infinite values in continuous y-axis
Warning: Removed 445 rows containing missing values (geom_bar).

Permute only from unique snps tested

This didnt help. I need to choose from the unique snps rather than counting if they were tested multiple times. I will look for the snps tested and get rid of those called as QTLs.

Steps:

  • get total and nuclear snps tested

  • subset to uniq snps

  • remove QTL snps

  • select correct number of snps 1000 times (permutation)

  • make bed files for snps snps

  • sort bed files

  • overlap each with chrom HMM

  • group the chrom HMM calls

  • make the final matrix

Session information

sessionInfo()
R version 3.5.1 (2018-07-02)
Platform: x86_64-apple-darwin15.6.0 (64-bit)
Running under: macOS Sierra 10.12.6

Matrix products: default
BLAS: /Library/Frameworks/R.framework/Versions/3.5/Resources/lib/libRblas.0.dylib
LAPACK: /Library/Frameworks/R.framework/Versions/3.5/Resources/lib/libRlapack.dylib

locale:
[1] en_US.UTF-8/en_US.UTF-8/en_US.UTF-8/C/en_US.UTF-8/en_US.UTF-8

attached base packages:
[1] grid      stats     graphics  grDevices utils     datasets  methods  
[8] base     

other attached packages:
 [1] bindrcpp_0.2.2      cowplot_0.9.3       ggpubr_0.1.8       
 [4] magrittr_1.5        data.table_1.11.8   VennDiagram_1.6.20 
 [7] futile.logger_1.4.3 forcats_0.3.0       stringr_1.3.1      
[10] dplyr_0.7.6         purrr_0.2.5         readr_1.1.1        
[13] tidyr_0.8.1         tibble_1.4.2        ggplot2_3.0.0      
[16] tidyverse_1.2.1     reshape2_1.4.3      workflowr_1.1.1    

loaded via a namespace (and not attached):
 [1] tidyselect_0.2.4     haven_1.1.2          lattice_0.20-35     
 [4] colorspace_1.3-2     htmltools_0.3.6      yaml_2.2.0          
 [7] rlang_0.2.2          R.oo_1.22.0          pillar_1.3.0        
[10] glue_1.3.0           withr_2.1.2          R.utils_2.7.0       
[13] RColorBrewer_1.1-2   lambda.r_1.2.3       modelr_0.1.2        
[16] readxl_1.1.0         bindr_0.1.1          plyr_1.8.4          
[19] munsell_0.5.0        gtable_0.2.0         cellranger_1.1.0    
[22] rvest_0.3.2          R.methodsS3_1.7.1    evaluate_0.11       
[25] labeling_0.3         knitr_1.20           broom_0.5.0         
[28] Rcpp_0.12.19         formatR_1.5          backports_1.1.2     
[31] scales_1.0.0         jsonlite_1.5         hms_0.4.2           
[34] digest_0.6.17        stringi_1.2.4        rprojroot_1.3-2     
[37] cli_1.0.1            tools_3.5.1          lazyeval_0.2.1      
[40] futile.options_1.0.1 crayon_1.3.4         whisker_0.3-2       
[43] pkgconfig_2.0.2      xml2_1.2.0           lubridate_1.7.4     
[46] assertthat_0.2.0     rmarkdown_1.10       httr_1.3.1          
[49] rstudioapi_0.8       R6_2.3.0             nlme_3.1-137        
[52] git2r_0.23.0         compiler_3.5.1      



This reproducible R Markdown analysis was created with workflowr 1.1.1