Genome Tracks with pyGenomeTracks

Last updated: 2018-10-30

workflowr checks: (Click a bullet for more information)

✔ R Markdown file: up-to-date

Great! Since the R Markdown file has been committed to the Git repository, you know the exact version of the code that produced these results.
✔ Environment: empty

Great job! The global environment was empty. Objects defined in the global environment can affect the analysis in your R Markdown file in unknown ways. For reproduciblity it’s best to always run the code in an empty environment.
✔ Seed: set.seed(12345)

The command set.seed(12345) was run prior to running the code in the R Markdown file. Setting a seed ensures that any results that rely on randomness, e.g. subsampling or permutations, are reproducible.
✔ Session information: recorded

Great job! Recording the operating system, R version, and package versions is critical for reproducibility.

✔ Repository version: 9c9486d

Great! You are using Git for version control. Tracking code development and connecting the code version to the results is critical for reproducibility. The version displayed above was the version of the Git repository at the time these results were generated.

Note that you need to be careful to ensure that all relevant files for the analysis have been committed to Git prior to generating the results (you can use wflow_publish or wflow_git_commit). workflowr only checks the R Markdown file, but you know if there are other scripts or data files that it depends on. Below is the status of the Git repository when the results were generated:


Ignored files:
    Ignored:    .DS_Store
    Ignored:    .Rhistory
    Ignored:    .Rproj.user/
    Ignored:    data/.DS_Store
    Ignored:    output/.DS_Store

Untracked files:
    Untracked:  KalistoAbundance18486.txt
    Untracked:  analysis/ncbiRefSeq_sm.sort.mRNA.bed
    Untracked:  analysis/snake.config.notes.Rmd
    Untracked:  analysis/verifyBAM.Rmd
    Untracked:  data/18486.genecov.txt
    Untracked:  data/APApeaksYL.total.inbrain.bed
    Untracked:  data/ChromHmmOverlap/
    Untracked:  data/GM12878.chromHMM.bed
    Untracked:  data/GM12878.chromHMM.txt
    Untracked:  data/NuclearApaQTLs.txt
    Untracked:  data/PeaksUsed/
    Untracked:  data/RNAkalisto/
    Untracked:  data/TotalApaQTLs.txt
    Untracked:  data/Totalpeaks_filtered_clean.bed
    Untracked:  data/YL-SP-18486-T-combined-genecov.txt
    Untracked:  data/YL-SP-18486-T_S9_R1_001-genecov.txt
    Untracked:  data/apaExamp/
    Untracked:  data/bedgraph_peaks/
    Untracked:  data/bin200.5.T.nuccov.bed
    Untracked:  data/bin200.Anuccov.bed
    Untracked:  data/bin200.nuccov.bed
    Untracked:  data/clean_peaks/
    Untracked:  data/comb_map_stats.csv
    Untracked:  data/comb_map_stats.xlsx
    Untracked:  data/comb_map_stats_39ind.csv
    Untracked:  data/combined_reads_mapped_three_prime_seq.csv
    Untracked:  data/diff_iso_trans/
    Untracked:  data/ensemble_to_genename.txt
    Untracked:  data/filtered_APApeaks_merged_allchrom_refseqTrans.closest2End.bed
    Untracked:  data/filtered_APApeaks_merged_allchrom_refseqTrans.closest2End.noties.bed
    Untracked:  data/first50lines_closest.txt
    Untracked:  data/gencov.test.csv
    Untracked:  data/gencov.test.txt
    Untracked:  data/gencov_zero.test.csv
    Untracked:  data/gencov_zero.test.txt
    Untracked:  data/gene_cov/
    Untracked:  data/joined
    Untracked:  data/leafcutter/
    Untracked:  data/merged_combined_YL-SP-threeprimeseq.bg
    Untracked:  data/mol_overlap/
    Untracked:  data/mol_pheno/
    Untracked:  data/nom_QTL/
    Untracked:  data/nom_QTL_opp/
    Untracked:  data/nom_QTL_trans/
    Untracked:  data/nuc6up/
    Untracked:  data/other_qtls/
    Untracked:  data/peakPerRefSeqGene/
    Untracked:  data/perm_QTL/
    Untracked:  data/perm_QTL_opp/
    Untracked:  data/perm_QTL_trans/
    Untracked:  data/reads_mapped_three_prime_seq.csv
    Untracked:  data/smash.cov.results.bed
    Untracked:  data/smash.cov.results.csv
    Untracked:  data/smash.cov.results.txt
    Untracked:  data/smash_testregion/
    Untracked:  data/ssFC200.cov.bed
    Untracked:  data/temp.file1
    Untracked:  data/temp.file2
    Untracked:  data/temp.gencov.test.txt
    Untracked:  data/temp.gencov_zero.test.txt
    Untracked:  output/picard/
    Untracked:  output/plots/
    Untracked:  output/qual.fig2.pdf

Unstaged changes:
    Modified:   analysis/28ind.peak.explore.Rmd
    Modified:   analysis/39indQC.Rmd
    Modified:   analysis/characterizeNuclearApaQtls.Rmd
    Modified:   analysis/cleanupdtseq.internalpriming.Rmd
    Modified:   analysis/coloc_apaQTLs_protQTLs.Rmd
    Modified:   analysis/dif.iso.usage.leafcutter.Rmd
    Modified:   analysis/diff_iso_pipeline.Rmd
    Modified:   analysis/explore.filters.Rmd
    Modified:   analysis/overlapMolQTL.Rmd
    Modified:   analysis/overlap_qtls.Rmd
    Modified:   analysis/peakOverlap_oppstrand.Rmd
    Modified:   analysis/pheno.leaf.comb.Rmd
    Modified:   analysis/test.max2.Rmd
    Modified:   code/Snakefile

Note that any generated files, e.g. HTML, png, CSS, etc., are not included in this status report because it is ok for generated content to have uncommitted changes.

Expand here to see past versions:

File	Version	Author	Date	Message
Rmd	9c9486d	Briana Mittleman	2018-10-30	add genoem tracks code

I want to use this analysis to create reproduciple genome track figures. I will use the python package pygenometracks.

Add to Conda environment (pygenometracks)


#Give a bed or bw
 make_tracks_file --trackFiles <file1.bed> <file2.bw> ... -o tracks.ini
 
pyGenomeTracks --tracks tracks.ini --region chr2:10,000,000-11,000,000 --outFileName nice_image.pdf

Try this with 1 individual.

#make_tracks_file --trackFiles  /project2/gilad/briana/threeprimeseq/data/bed/YL-SP-19257-T-combined.bed /project2/gilad/briana/threeprimeseq/data/bed/YL-SP-19257-N-combined.bed /project2/gilad/briana/genome_anotation_data/refseq.ProteinCoding.bed -o /project2/gilad/briana/threeprimeseq/data/genome_tracks/NA19257.tracks.ini

#pyGenomeTracks --tracks /project2/gilad/briana/threeprimeseq/data/genome_tracks/NA19257.tracks.ini --region chr7:5,564,986-5,572,554 --outFileName /project2/gilad/briana/threeprimeseq/data/genome_tracks/actb_19257.png



#make with bigwig
make_tracks_file --trackFiles  /project2/gilad/briana/threeprimeseq/data/bigwig/YL-SP-19257-T-combined.bw  /project2/gilad/briana/threeprimeseq/data/bigwig/YL-SP-19257-N-combined.bw /project2/gilad/briana/genome_anotation_data/NCBI_refseq_forPyGenTrack_sort.bed -o /project2/gilad/briana/threeprimeseq/data/genome_tracks/NA19257.BW.tracks.ini


/project2/gilad/briana/threeprimeseq/data/bigwig/YL-SP-19257-N-combined.bw


pyGenomeTracks --tracks /project2/gilad/briana/threeprimeseq/data/genome_tracks/NA19257.BW.tracks.ini --region chr7:5,564,986-5,572,554 --outFileName /project2/gilad/briana/threeprimeseq/data/genome_tracks/actb_19257.png

I can also add a track with the peaks!cd . /project2/gilad/briana/threeprimeseq/data/mergedPeaks_comb/filtered_APApeaks_merged_allchrom_refseqTrans.noties_sm.fixed.bed

awk '{print $1 "\t" $2 "\t" $3 "\t" $4 "\t" "1" "\t" $6}' /project2/gilad/briana/genome_anotation_data/ncbiRefSeq_endProtCodGenes_sort.bed | head 


pyGenomeTracks --tracks /project2/gilad/briana/threeprimeseq/data/genome_tracks/NA19257.BW.tracks.ini --region chr1:1,680,671-1,713,508 --outFileName /project2/gilad/briana/threeprimeseq/data/genome_tracks/nadk_19257_BW.png


#gata3 chr10:8,094,667-8,119,164


#try all ind. 
make_tracks_file --trackFiles  /project2/gilad/briana/threeprimeseq/data/bigwig/*combined.bw /project2/gilad/briana/genome_anotation_data/NCBI_refseq_forPyGenTrack_sort.bed -o /project2/gilad/briana/threeprimeseq/data/genome_tracks/allInd.BW.tracks.ini

I want to make this with 1 individal and the corresponding RNA seq track.

First I need to make a BW file for the RNA seq.

NA19257RNAseq2bw.sh


#!/bin/bash

#SBATCH --job-name=NA19257RNAseq2bw
#SBATCH --account=pi-yangili1
#SBATCH --time=36:00:00
#SBATCH --output=NA19257RNAseq2bw.out
#SBATCH --error=NA19257RNAseq2bw.err
#SBATCH --partition=broadwl
#SBATCH --mem=30G
#SBATCH --mail-type=END

module load Anaconda3
source activate three-prime-env

bedtools genomecov -ibam /project2/yangili1/LCL/RNAseqGeuvadisBams/RNAseqGeuvadis_STAR_19257.final.bam -bg -split > /project2/gilad/briana/threeprimeseq/data/rnaseq_bw/RNAseqGeuvadis_STAR_19257.final.bg



sort -k1,1 -k2,2n /project2/gilad/briana/threeprimeseq/data/rnaseq_bw/RNAseqGeuvadis_STAR_19257.final.bg > /project2/gilad/briana/threeprimeseq/data/rnaseq_bw/RNAseqGeuvadis_STAR_19257.final.sort.bg


bedGraphToBigWig /project2/gilad/briana/threeprimeseq/data/rnaseq_bw/RNAseqGeuvadis_STAR_19257.final.sort.bg /project2/gilad/briana/genome_anotation_data/chrom.length.txt /project2/gilad/briana/threeprimeseq/data/rnaseq_bw/RNAseqGeuvadis_STAR_19257.final.sort.bw


make_tracks_file --trackFiles  /project2/gilad/briana/threeprimeseq/data/bigwig/YL-SP-19257-T-combined.bw  /project2/gilad/briana/threeprimeseq/data/bigwig/YL-SP-19257-N-combined.bw /project2/gilad/briana/threeprimeseq/data/rnaseq_bw/RNAseqGeuvadis_STAR_19257.final.sort.bw /project2/gilad/briana/genome_anotation_data/NCBI_refseq_forPyGenTrack_sort.bed -o /project2/gilad/briana/threeprimeseq/data/genome_tracks/NA19257.RNA.BW.tracks.ini


pyGenomeTracks --tracks /project2/gilad/briana/threeprimeseq/data/genome_tracks/NA19257.RNA.BW.tracks.ini --region chr17:27900300-27916800 --outFileName /project2/gilad/briana/threeprimeseq/data/genome_tracks/git1_19257_rna_BW_.png

Zoom into UTR for all individuals to show replicability

pyGenomeTracks --tracks /project2/gilad/briana/threeprimeseq/data/genome_tracks/allInd.BW.tracks.ini --region chr17:27900300-27902000 --outFileName /project2/gilad/briana/threeprimeseq/data/genome_tracks/git1_allind_UTR_BW_.png

Session information

sessionInfo()

R version 3.5.1 (2018-07-02)
Platform: x86_64-apple-darwin15.6.0 (64-bit)
Running under: macOS Sierra 10.12.6

Matrix products: default
BLAS: /Library/Frameworks/R.framework/Versions/3.5/Resources/lib/libRblas.0.dylib
LAPACK: /Library/Frameworks/R.framework/Versions/3.5/Resources/lib/libRlapack.dylib

locale:
[1] en_US.UTF-8/en_US.UTF-8/en_US.UTF-8/C/en_US.UTF-8/en_US.UTF-8

attached base packages:
[1] stats     graphics  grDevices utils     datasets  methods   base     

loaded via a namespace (and not attached):
 [1] workflowr_1.1.1   Rcpp_0.12.19      digest_0.6.17    
 [4] rprojroot_1.3-2   R.methodsS3_1.7.1 backports_1.1.2  
 [7] git2r_0.23.0      magrittr_1.5      evaluate_0.11    
[10] stringi_1.2.4     whisker_0.3-2     R.oo_1.22.0      
[13] R.utils_2.7.0     rmarkdown_1.10    tools_3.5.1      
[16] stringr_1.3.1     yaml_2.2.0        compiler_3.5.1   
[19] htmltools_0.3.6   knitr_1.20

This reproducible R Markdown analysis was created with workflowr 1.1.1

Genome Tracks with pyGenomeTracks

Briana Mittleman

10/1/2018

Session information