Last updated: 2019-02-18

Checks: 6 0

Knit directory: threeprimeseq/analysis/

This reproducible R Markdown analysis was created with workflowr (version 1.2.0). The Report tab describes the reproducibility checks that were applied when the results were created. The Past versions tab lists the development history.


Great! Since the R Markdown file has been committed to the Git repository, you know the exact version of the code that produced these results.

Great job! The global environment was empty. Objects defined in the global environment can affect the analysis in your R Markdown file in unknown ways. For reproduciblity it’s best to always run the code in an empty environment.

The command set.seed(12345) was run prior to running the code in the R Markdown file. Setting a seed ensures that any results that rely on randomness, e.g. subsampling or permutations, are reproducible.

Great job! Recording the operating system, R version, and package versions is critical for reproducibility.

Nice! There were no cached chunks for this analysis, so you can be confident that you successfully produced the results during this run.

Great! You are using Git for version control. Tracking code development and connecting the code version to the results is critical for reproducibility. The version displayed above was the version of the Git repository at the time these results were generated.

Note that you need to be careful to ensure that all relevant files for the analysis have been committed to Git prior to generating the results (you can use wflow_publish or wflow_git_commit). workflowr only checks the R Markdown file, but you know if there are other scripts or data files that it depends on. Below is the status of the Git repository when the results were generated:


Ignored files:
    Ignored:    .DS_Store
    Ignored:    .Rhistory
    Ignored:    .Rproj.user/
    Ignored:    data/.DS_Store
    Ignored:    data/perm_QTL_trans_noMP_5percov/
    Ignored:    output/.DS_Store

Untracked files:
    Untracked:  KalistoAbundance18486.txt
    Untracked:  analysis/4suDataIGV.Rmd
    Untracked:  analysis/DirectionapaQTL.Rmd
    Untracked:  analysis/EvaleQTLs.Rmd
    Untracked:  analysis/YL_QTL_test.Rmd
    Untracked:  analysis/characterize_apaQTLs.Rmd
    Untracked:  analysis/ncbiRefSeq_sm.sort.mRNA.bed
    Untracked:  analysis/snake.config.notes.Rmd
    Untracked:  analysis/verifyBAM.Rmd
    Untracked:  analysis/verifybam_dubs.Rmd
    Untracked:  code/PeaksToCoverPerReads.py
    Untracked:  code/strober_pc_pve_heatmap_func.R
    Untracked:  data/18486.genecov.txt
    Untracked:  data/APApeaksYL.total.inbrain.bed
    Untracked:  data/AllPeak_counts/
    Untracked:  data/ApaQTLs/
    Untracked:  data/ChromHmmOverlap/
    Untracked:  data/DistTXN2Peak_genelocAnno/
    Untracked:  data/GM12878.chromHMM.bed
    Untracked:  data/GM12878.chromHMM.txt
    Untracked:  data/LianoglouLCL/
    Untracked:  data/LocusZoom/
    Untracked:  data/NuclearApaQTLs.txt
    Untracked:  data/PeakCounts/
    Untracked:  data/PeakCounts_noMP_5perc/
    Untracked:  data/PeakCounts_noMP_genelocanno/
    Untracked:  data/PeakUsage/
    Untracked:  data/PeakUsage_noMP/
    Untracked:  data/PeakUsage_noMP_GeneLocAnno/
    Untracked:  data/PeaksUsed/
    Untracked:  data/PeaksUsed_noMP_5percCov/
    Untracked:  data/RNAkalisto/
    Untracked:  data/RefSeq_annotations/
    Untracked:  data/TotalApaQTLs.txt
    Untracked:  data/Totalpeaks_filtered_clean.bed
    Untracked:  data/UnderstandPeaksQC/
    Untracked:  data/WASP_STAT/
    Untracked:  data/YL-SP-18486-T-combined-genecov.txt
    Untracked:  data/YL-SP-18486-T_S9_R1_001-genecov.txt
    Untracked:  data/YL_QTL_test/
    Untracked:  data/apaExamp/
    Untracked:  data/apaQTL_examp_noMP/
    Untracked:  data/bedgraph_peaks/
    Untracked:  data/bin200.5.T.nuccov.bed
    Untracked:  data/bin200.Anuccov.bed
    Untracked:  data/bin200.nuccov.bed
    Untracked:  data/clean_peaks/
    Untracked:  data/comb_map_stats.csv
    Untracked:  data/comb_map_stats.xlsx
    Untracked:  data/comb_map_stats_39ind.csv
    Untracked:  data/combined_reads_mapped_three_prime_seq.csv
    Untracked:  data/diff_iso_GeneLocAnno/
    Untracked:  data/diff_iso_proc/
    Untracked:  data/diff_iso_trans/
    Untracked:  data/ensemble_to_genename.txt
    Untracked:  data/example_gene_peakQuant/
    Untracked:  data/explainProtVar/
    Untracked:  data/filtPeakOppstrand_cov_noMP_GeneLocAnno_5perc/
    Untracked:  data/filtered_APApeaks_merged_allchrom_refseqTrans.closest2End.bed
    Untracked:  data/filtered_APApeaks_merged_allchrom_refseqTrans.closest2End.noties.bed
    Untracked:  data/first50lines_closest.txt
    Untracked:  data/gencov.test.csv
    Untracked:  data/gencov.test.txt
    Untracked:  data/gencov_zero.test.csv
    Untracked:  data/gencov_zero.test.txt
    Untracked:  data/gene_cov/
    Untracked:  data/joined
    Untracked:  data/leafcutter/
    Untracked:  data/merged_combined_YL-SP-threeprimeseq.bg
    Untracked:  data/molPheno_noMP/
    Untracked:  data/mol_overlap/
    Untracked:  data/mol_pheno/
    Untracked:  data/nom_QTL/
    Untracked:  data/nom_QTL_opp/
    Untracked:  data/nom_QTL_trans/
    Untracked:  data/nuc6up/
    Untracked:  data/nuc_10up/
    Untracked:  data/other_qtls/
    Untracked:  data/pQTL_otherphen/
    Untracked:  data/peakPerRefSeqGene/
    Untracked:  data/perm_QTL/
    Untracked:  data/perm_QTL_GeneLocAnno_noMP_5percov/
    Untracked:  data/perm_QTL_GeneLocAnno_noMP_5percov_3UTR/
    Untracked:  data/perm_QTL_diffWindow/
    Untracked:  data/perm_QTL_opp/
    Untracked:  data/perm_QTL_trans/
    Untracked:  data/perm_QTL_trans_filt/
    Untracked:  data/protAndAPAAndExplmRes.Rda
    Untracked:  data/protAndAPAlmRes.Rda
    Untracked:  data/protAndExpressionlmRes.Rda
    Untracked:  data/reads_mapped_three_prime_seq.csv
    Untracked:  data/smash.cov.results.bed
    Untracked:  data/smash.cov.results.csv
    Untracked:  data/smash.cov.results.txt
    Untracked:  data/smash_testregion/
    Untracked:  data/ssFC200.cov.bed
    Untracked:  data/temp.file1
    Untracked:  data/temp.file2
    Untracked:  data/temp.gencov.test.txt
    Untracked:  data/temp.gencov_zero.test.txt
    Untracked:  data/threePrimeSeqMetaData.csv
    Untracked:  data/threePrimeSeqMetaData55Ind.txt
    Untracked:  data/threePrimeSeqMetaData55Ind.xlsx
    Untracked:  data/threePrimeSeqMetaData55Ind_noDup.txt
    Untracked:  data/threePrimeSeqMetaData55Ind_noDup.xlsx
    Untracked:  data/threePrimeSeqMetaData55Ind_noDup_WASPMAP.txt
    Untracked:  data/threePrimeSeqMetaData55Ind_noDup_WASPMAP.xlsx
    Untracked:  output/picard/
    Untracked:  output/plots/
    Untracked:  output/qual.fig2.pdf

Unstaged changes:
    Modified:   analysis/28ind.peak.explore.Rmd
    Modified:   analysis/CompareLianoglouData.Rmd
    Modified:   analysis/NewPeakPostMP.Rmd
    Modified:   analysis/apaQTLoverlapGWAS.Rmd
    Modified:   analysis/cleanupdtseq.internalpriming.Rmd
    Modified:   analysis/coloc_apaQTLs_protQTLs.Rmd
    Modified:   analysis/dif.iso.usage.leafcutter.Rmd
    Modified:   analysis/diff_iso_pipeline.Rmd
    Modified:   analysis/explainpQTLs.Rmd
    Modified:   analysis/explore.filters.Rmd
    Modified:   analysis/flash2mash.Rmd
    Modified:   analysis/mispriming_approach.Rmd
    Modified:   analysis/overlapMolQTL.Rmd
    Modified:   analysis/overlapMolQTL.opposite.Rmd
    Modified:   analysis/overlap_qtls.Rmd
    Modified:   analysis/peakOverlap_oppstrand.Rmd
    Modified:   analysis/peakQCPPlots.Rmd
    Modified:   analysis/peakQCplotsSTARprocessing.Rmd
    Modified:   analysis/pheno.leaf.comb.Rmd
    Modified:   analysis/pipeline_55Ind.Rmd
    Modified:   analysis/swarmPlots_QTLs.Rmd
    Modified:   analysis/test.max2.Rmd
    Modified:   analysis/test.smash.Rmd
    Modified:   analysis/understandPeaks.Rmd
    Modified:   code/Snakefile

Note that any generated files, e.g. HTML, png, CSS, etc., are not included in this status report because it is ok for generated content to have uncommitted changes.


These are the previous versions of the R Markdown and HTML files. If you’ve configured a remote Git repository (see ?wflow_git_remote), click on the hyperlinks in the table below to view them.

File Version Author Date Message
Rmd bcb2f86 Briana Mittleman 2019-02-18 add qtl by per and diff iso

I will use this analysis to look at the number of apaQTL genes by the percentile of the counts for the gene. This may help us know if we want to sequence the libraries deeper.

library(workflowr)
This is workflowr version 1.2.0
Run ?workflowr for help getting started
library(tidyverse)
── Attaching packages ──────────────────────────────────────────────────────────────────────────── tidyverse 1.2.1 ──
✔ ggplot2 3.0.0     ✔ purrr   0.2.5
✔ tibble  1.4.2     ✔ dplyr   0.7.6
✔ tidyr   0.8.1     ✔ stringr 1.4.0
✔ readr   1.1.1     ✔ forcats 0.3.0
Warning: package 'stringr' was built under R version 3.5.2
── Conflicts ─────────────────────────────────────────────────────────────────────────────── tidyverse_conflicts() ──
✖ dplyr::filter() masks stats::filter()
✖ dplyr::lag()    masks stats::lag()
library(cowplot)

Attaching package: 'cowplot'
The following object is masked from 'package:ggplot2':

    ggsave
library(reshape2)

Attaching package: 'reshape2'
The following object is masked from 'package:tidyr':

    smiths

QTL genes

First, upload the QTL gene.

nucQTLs=read.table("../data/ApaQTLs/NuclearapaQTLs.GeneLocAnno.noMP.5perc.10FDR.txt",stringsAsFactors = F, col.names = c("pid", "nvar", "shape1", "shape2", "dummy", "sid", "dist", "npval", "slope", "ppval", "bpval", "bh"))

nucQTLsGenes= nucQTLs%>%separate(pid, into=c("chr", "start", "end", "id"), sep=":") %>% separate(id, into=c("gene", "strand", "peak"), sep="_") %>% select(gene) %>% unique()


totQTLs=read.table("../data/ApaQTLs/TotalapaQTLs.GeneLocAnno.noMP.5perc.10FDR.txt",stringsAsFactors = F, col.names = c("pid", "nvar", "shape1", "shape2", "dummy", "sid", "dist", "npval", "slope", "ppval", "bpval", "bh"))

totQTLsGenes= totQTLs%>%separate(pid, into=c("chr", "start", "end", "id"), sep=":") %>% separate(id, into=c("gene", "strand", "peak"), sep="_") %>% select(gene) %>% unique()

How many of the genes overlap:

QTLgene_both=totQTLsGenes %>% inner_join(nucQTLsGenes, by="gene")
nrow(QTLgene_both) 
[1] 141

This means 141 genes have a QTL for both. It does not tell me if the QTL is the same.

Gene Counts

I can get this from the prefiltered peak counts. /project2/gilad/briana/threeprimeseq/data/filtPeakOppstrand_cov_noMP_GeneLocAnno/filtered_APApeaks_merged_allchrom_refseqGenes.GeneLocAnno_NoMP_sm_quant.Total.fixed.fc

/project2/gilad/briana/threeprimeseq/data/filtPeakOppstrand_cov_noMP_GeneLocAnno/filtered_APApeaks_merged_allchrom_refseqGenes.GeneLocAnno_NoMP_sm_quant.Nuclear.fixed.fc

I can pull these files in, group them by gene and get summaries.

Total

totPeakCounts=read.table("../data/AllPeak_counts/filtered_APApeaks_merged_allchrom_refseqGenes.GeneLocAnno_NoMP_sm_quant.Total.fixed.fc", header = T, stringsAsFactors = F) %>% select(-Chr, -Start, -End, -Strand, -Length) %>% separate(Geneid, into=c("peak", "chr", "start", "end", "strand", "gene"), sep=":") %>% select(-peak, -chr,-start, -end, -strand, -gene)
totPeakCountsGene=read.table("../data/AllPeak_counts/filtered_APApeaks_merged_allchrom_refseqGenes.GeneLocAnno_NoMP_sm_quant.Total.fixed.fc", header = T, stringsAsFactors = F) %>% select(-Chr, -Start, -End, -Strand, -Length) %>% separate(Geneid, into=c("peak", "chr", "start", "end", "strand", "gene"), sep=":") %>% select(gene)
#sum across ind.
totPeakCounts_Sum=rowSums(totPeakCounts)
totPeakCountsGeneSum=as.data.frame(cbind(totPeakCountsGene,totPeakCounts_Sum)) %>% group_by(gene) %>% summarise(TotalCount=sum(totPeakCounts_Sum)) %>% mutate(Percentile = percent_rank(TotalCount)) 

Subset by percetile:

totalCount_10= totPeakCountsGeneSum %>% filter(Percentile<.1)
totalCount_20= totPeakCountsGeneSum %>% filter(Percentile<.2, Percentile>.1)
totalCount_30= totPeakCountsGeneSum %>% filter(Percentile<.3, Percentile>.2)
totalCount_40= totPeakCountsGeneSum %>% filter(Percentile<.4, Percentile>.3)
totalCount_50= totPeakCountsGeneSum %>% filter(Percentile<.5, Percentile>.4)
totalCount_60= totPeakCountsGeneSum %>% filter(Percentile<.6, Percentile>.5)
totalCount_70= totPeakCountsGeneSum %>% filter(Percentile<.7, Percentile>.6)
totalCount_80= totPeakCountsGeneSum %>% filter(Percentile<.8, Percentile>.7)
totalCount_90= totPeakCountsGeneSum %>% filter(Percentile<.9, Percentile>.8)
totalCount_100= totPeakCountsGeneSum %>% filter(Percentile<1, Percentile>.9)

Nuclear

nucPeakCounts=read.table("../data/AllPeak_counts/filtered_APApeaks_merged_allchrom_refseqGenes.GeneLocAnno_NoMP_sm_quant.Nuclear.fixed.fc", header = T, stringsAsFactors = F) %>% select(-Chr, -Start, -End, -Strand, -Length) %>% separate(Geneid, into=c("peak", "chr", "start", "end", "strand", "gene"), sep=":") %>% select(-peak, -chr,-start, -end, -strand, -gene)
nucPeakCountsGene=read.table("../data/AllPeak_counts/filtered_APApeaks_merged_allchrom_refseqGenes.GeneLocAnno_NoMP_sm_quant.Nuclear.fixed.fc", header = T, stringsAsFactors = F) %>% select(-Chr, -Start, -End, -Strand, -Length) %>% separate(Geneid, into=c("peak", "chr", "start", "end", "strand", "gene"), sep=":") %>% select(gene)
#sum across ind.
nucPeakCounts_Sum=rowSums(nucPeakCounts)
nucPeakCountsGeneSum=as.data.frame(cbind(nucPeakCountsGene,nucPeakCounts_Sum)) %>% group_by(gene) %>% summarise(NuclearCount=sum(nucPeakCounts_Sum)) %>% mutate(Percentile = percent_rank(NuclearCount)) 
nuclearCount_10= nucPeakCountsGeneSum %>% filter(Percentile<.1)
nuclearCount_20= nucPeakCountsGeneSum %>% filter(Percentile<.2, Percentile>.1)
nuclearCount_30= nucPeakCountsGeneSum %>% filter(Percentile<.3, Percentile>.2)
nuclearCount_40= nucPeakCountsGeneSum %>% filter(Percentile<.4, Percentile>.3)
nuclearCount_50= nucPeakCountsGeneSum %>% filter(Percentile<.5, Percentile>.4)
nuclearCount_60= nucPeakCountsGeneSum %>% filter(Percentile<.6, Percentile>.5)
nuclearCount_70= nucPeakCountsGeneSum %>% filter(Percentile<.7, Percentile>.6)
nuclearCount_80= nucPeakCountsGeneSum %>% filter(Percentile<.8, Percentile>.7)
nuclearCount_90= nucPeakCountsGeneSum %>% filter(Percentile<.9, Percentile>.8)
nuclearCount_100= nucPeakCountsGeneSum %>% filter(Percentile<1, Percentile>.9)

QTL genes

I can get the percentile for each QTL gene.

totQTLGene_Perc= totQTLsGenes %>% inner_join(totPeakCountsGeneSum, by="gene") %>% mutate(roundPerc=round(Percentile, digits=1)) %>% group_by(roundPerc) %>% summarise(Ngenes=n())
nucQTLGene_Perc= nucQTLsGenes %>% inner_join(nucPeakCountsGeneSum, by="gene")%>% mutate(roundPerc=round(Percentile, digits=1)) %>% group_by(roundPerc) %>% summarise(Ngenes=n())

bothPerc=totQTLGene_Perc %>% full_join(nucQTLGene_Perc,  by = c("roundPerc"))
bothPerc$Ngenes.x= bothPerc$Ngenes.x %>% replace_na(0)
colnames(bothPerc)= c("Percentile", "Total", "Nuclear")


bothPerc_melt= melt(bothPerc, id.vars = "Percentile") 
colnames(bothPerc_melt) =c("Percentile", "Fraction", "Genes")

Plot:

ggplot(bothPerc_melt, aes(x=Percentile, y= Genes, by=Fraction, fill=Fraction)) + geom_bar(stat="identity", position = "dodge") + theme(axis.text.y = element_text(size=12),axis.title.y=element_text(size=10,face="bold"), axis.title.x=element_text(size=12,face="bold"))+ scale_fill_manual(values=c("darkviolet","deepskyblue3"))  

To make is a percente of genes in the category I will divide each number of genes category by the number of total QTL genes. For total this is 291 and for nuclear it is 496

totQTLGene_Perc_prop= totQTLsGenes %>% inner_join(totPeakCountsGeneSum, by="gene") %>% mutate(roundPerc=round(Percentile, digits=1)) %>% group_by(roundPerc) %>% summarise(Ngenes=n()) %>% mutate(PercGenes=Ngenes/291)
nucQTLGene_Perc_prop= nucQTLsGenes %>% inner_join(nucPeakCountsGeneSum, by="gene")%>% mutate(roundPerc=round(Percentile, digits=1)) %>% group_by(roundPerc) %>% summarise(Ngenes=n()) %>%mutate(PercGenes=Ngenes/496)


bothPercProp=totQTLGene_Perc_prop %>% full_join(nucQTLGene_Perc_prop,  by = c("roundPerc")) %>% select(roundPerc, starts_with("perc"))
bothPercProp$PercGenes.x= bothPercProp$PercGenes.x %>% replace_na(0)
colnames(bothPercProp)= c("Percentile", "Total", "Nuclear")


bothPercPrp_melt= melt(bothPercProp, id.vars = "Percentile") 
colnames(bothPercPrp_melt) =c("Percentile", "Fraction", "GenesProp")
QTLSbyCountPerc=ggplot(bothPercPrp_melt, aes(x=Percentile, y=GenesProp, fill=Fraction)) +geom_bar(stat="identity", position = "dodge")+labs(title="Proportion of QTL genes by Read count percentile",y="Proportion of QTLs", x="Read Cound percentile") +  theme(axis.text.y = element_text(size=12),axis.title.y=element_text(size=10,face="bold"), axis.title.x=element_text(size=12,face="bold"))+ scale_fill_manual(values=c("darkviolet","deepskyblue3"))  + facet_grid(~Fraction)
QTLSbyCountPerc

ggsave(QTLSbyCountPerc, file="../output/plots/QTLSbyCountPerc.png")
Saving 7 x 5 in image

Plot the distribution of the percentile:

totQTLGene_Percentile= totQTLsGenes %>% inner_join(totPeakCountsGeneSum, by="gene") 

ggplot(totQTLGene_Percentile,aes( x=Percentile)) + geom_histogram(bins=50)

nucQTLGene_Percentile= nucQTLsGenes %>% inner_join(nucPeakCountsGeneSum, by="gene")
ggplot(nucQTLGene_Percentile,aes( x=Percentile)) + geom_histogram(bins=50)



sessionInfo()
R version 3.5.1 (2018-07-02)
Platform: x86_64-apple-darwin15.6.0 (64-bit)
Running under: macOS  10.14.1

Matrix products: default
BLAS: /Library/Frameworks/R.framework/Versions/3.5/Resources/lib/libRblas.0.dylib
LAPACK: /Library/Frameworks/R.framework/Versions/3.5/Resources/lib/libRlapack.dylib

locale:
[1] en_US.UTF-8/en_US.UTF-8/en_US.UTF-8/C/en_US.UTF-8/en_US.UTF-8

attached base packages:
[1] stats     graphics  grDevices utils     datasets  methods   base     

other attached packages:
 [1] bindrcpp_0.2.2  reshape2_1.4.3  cowplot_0.9.3   forcats_0.3.0  
 [5] stringr_1.4.0   dplyr_0.7.6     purrr_0.2.5     readr_1.1.1    
 [9] tidyr_0.8.1     tibble_1.4.2    ggplot2_3.0.0   tidyverse_1.2.1
[13] workflowr_1.2.0

loaded via a namespace (and not attached):
 [1] tidyselect_0.2.4 haven_1.1.2      lattice_0.20-35  colorspace_1.3-2
 [5] htmltools_0.3.6  yaml_2.2.0       rlang_0.2.2      pillar_1.3.0    
 [9] glue_1.3.0       withr_2.1.2      modelr_0.1.2     readxl_1.1.0    
[13] bindr_0.1.1      plyr_1.8.4       munsell_0.5.0    gtable_0.2.0    
[17] cellranger_1.1.0 rvest_0.3.2      evaluate_0.13    labeling_0.3    
[21] knitr_1.20       broom_0.5.0      Rcpp_0.12.19     scales_1.0.0    
[25] backports_1.1.2  jsonlite_1.6     fs_1.2.6         hms_0.4.2       
[29] digest_0.6.17    stringi_1.2.4    grid_3.5.1       rprojroot_1.3-2 
[33] cli_1.0.1        tools_3.5.1      magrittr_1.5     lazyeval_0.2.1  
[37] crayon_1.3.4     whisker_0.3-2    pkgconfig_2.0.2  xml2_1.2.0      
[41] lubridate_1.7.4  assertthat_0.2.0 rmarkdown_1.11   httr_1.3.1      
[45] rstudioapi_0.9.0 R6_2.3.0         nlme_3.1-137     git2r_0.24.0    
[49] compiler_3.5.1