hESC data global read counts
Carmen Navarro
2021-02-03
Last updated: 2021-02-07
Checks: 7 0
Knit directory: hesc-epigenomics/
This reproducible R Markdown analysis was created with workflowr (version 1.6.2). The Checks tab describes the reproducibility checks that were applied when the results were created. The Past versions tab lists the development history.
Great! Since the R Markdown file has been committed to the Git repository, you know the exact version of the code that produced these results.
Great job! The global environment was empty. Objects defined in the global environment can affect the analysis in your R Markdown file in unknown ways. For reproduciblity it’s best to always run the code in an empty environment.
The command set.seed(20210202) was run prior to running the code in the R Markdown file. Setting a seed ensures that any results that rely on randomness, e.g. subsampling or permutations, are reproducible.
Great job! Recording the operating system, R version, and package versions is critical for reproducibility.
Nice! There were no cached chunks for this analysis, so you can be confident that you successfully produced the results during this run.
Great job! Using relative paths to the files within your workflowr project makes it easier to run your code on other machines.
Great! You are using Git for version control. Tracking code development and connecting the code version to the results is critical for reproducibility.
The results in this page were generated with repository version ffa7c1a. See the Past versions tab to see a history of the changes made to the R Markdown and HTML files.
Note that you need to be careful to ensure that all relevant files for the analysis have been committed to Git prior to generating the results (you can use wflow_publish or wflow_git_commit). workflowr only checks the R Markdown file, but you know if there are other scripts or data files that it depends on. Below is the status of the Git repository when the results were generated:
Ignored files:
Ignored: .Rhistory
Ignored: .Rproj.user/
Ignored: data/bed/
Ignored: data/bw
Ignored: data/meta/
Ignored: data/peaks
Ignored: data/rnaseq/
Note that any generated files, e.g. HTML, png, CSS, etc., are not included in this status report because it is ok for generated content to have uncommitted changes.
These are the previous versions of the repository in which changes were made to the R Markdown (analysis/global_read_counts.Rmd) and HTML (docs/global_read_counts.html) files. If you’ve configured a remote Git repository (see ?wflow_git_remote), click on the hyperlinks in the table below to view the files as they were in that past version.
| File | Version | Author | Date | Message |
|---|---|---|---|---|
| Rmd | ffa7c1a | cnluzon | 2021-02-07 | Global read counts embedded data |
| html | ffa7c1a | cnluzon | 2021-02-07 | Global read counts embedded data |
| html | 0481b52 | cnluzon | 2021-02-05 | RNA seq first analysis |
| html | 87ff15f | cnluzon | 2021-02-05 | Renamed read counts file |
| Rmd | 7db4707 | cnluzon | 2021-02-03 | wflow_rename(“analysis/00_global_counts.Rmd”, “analysis/global_read_counts.Rmd”) |
| html | 7db4707 | cnluzon | 2021-02-03 | wflow_rename(“analysis/00_global_counts.Rmd”, “analysis/global_read_counts.Rmd”) |
Summary
This is a report on global read counts for Hu2 data.
Pipeline version: https://github.com/NBISweden/minute/tree/8c7646949abae12ef5bd9295f20fa6eeb7182533 .
Mapping stats summary: data/meta/Kumar_2020_stats_summary.csv.
INRC stands for Input Normalized Read Counts. Each sample number of mapped reads is divided by the corresponding number of reads in the Input. This can be done because of the multiplexed nature of MINUTE-ChIP protocol.
In the following plots, the value shown is the log2 enrichment over the reference INRC value per sample, which is the matched untreated Naïve sample (pooled). Each dot represents one replicate.
Helper functions
#' Calculate INRC from a mapped read counts table, and append such values
#' to it.
#'
#' @param counts Counts table. Corresponding file is provided as part of the
#' included metadata.
#' @param selector Counts column used. Final_mapped represents the final number
#' of reads after deduplication and blacklisting.
#' @return A table including INRC and INRC norm to naive reference
calculate_inrc <- function(counts, selector = "final_mapped") {
counts$condition <- paste(counts$celltype, counts$treatment, sep="_")
inputs <- counts[counts$ip == "Input", c("library", selector)]
colnames(inputs) <- c("library", "input_reads")
non_inputs <- counts[counts$ip != "Input",]
counts <- merge(non_inputs, inputs, by.x="input", by.y="library")
counts$inrc <- counts[, selector] / counts[, "input_reads"]
references <- counts[grepl("_Ni_pooled", counts$library), c("ip", "inrc")]
colnames(references) <- c("ip", "ref_inrc")
counts <- merge(counts, references, by="ip")
counts$norm_to_naive <- log2(counts$inrc / counts$ref_inrc)
id_vars <- c("ip", "treatment", "celltype", "condition", "replicate", "norm_to_naive")
inrc <- counts[, c(id_vars)]
inrc$condition <- factor(inrc$condition, levels = c("Naive_Untreated", "Primed_Untreated", "Naive_EZH2i", "Primed_EZH2i"))
inrc
}
#' Barplot INRC pooled vs replicates per condition
#'
#' @param inrc Table with the INRC values
#' @param ip Which IP to plot
#' @param colors Corresponding colors
inrc_barplot <- function(inrc, ip, colors) {
inrc <- inrc[inrc$ip == ip, ]
max_v <- max(abs(inrc$norm_to_naive))
aesthetics <- aes(x = .data[["condition"]],
y = .data[["norm_to_naive"]],
color = .data[["condition"]])
ggplot(inrc[inrc$replicate!='pooled',], aesthetics) +
geom_point() +
geom_bar(data=inrc[inrc$replicate=='pooled',],
stat='identity', alpha=0.6, aes(fill=condition)) +
scale_fill_manual(values = colors) +
scale_color_manual(values = colors) +
labs(x = "", y = 'log2(INRC vs Naïve)', title = paste(ip, "MINUTE-ChIP")) +
theme_classic(base_size=params$fontsize) +
theme(axis.text.x = element_text(angle=45, hjust=1)) + ylim(-max_v, max_v)
}
colors_list <- c("Naive_EZH2i"="#5F9EA0",
"Naive_Untreated"="#278b8b",
"Primed_EZH2i"="#f47770",
"Primed_Untreated"="#f44b34")Global read counts levels
H2AUb levels
counts_file <- file.path(params$datadir, "meta", "Kumar_2020_stats_summary.csv")
counts <- read.table(counts_file, sep="\t", header = T, na.strings = "NA", stringsAsFactors = F)
inrc <- calculate_inrc(counts)
ip <- "H2Aub"
inrc_barplot(inrc, "H2Aub", colors_list)
| Version | Author | Date |
|---|---|---|
| 7db4707 | cnluzon | 2021-02-03 |
You can download data values here: download plot data.
H3K27m3 levels
inrc_barplot(inrc, "H3K27m3", colors_list)
| Version | Author | Date |
|---|---|---|
| 7db4707 | cnluzon | 2021-02-03 |
You can download data values here: download plot data.
H3K4m3 levels
inrc_barplot(inrc, "H3K4m3", colors_list)
| Version | Author | Date |
|---|---|---|
| 7db4707 | cnluzon | 2021-02-03 |
You can download data values here: download plot data.
sessionInfo()R version 4.0.3 (2020-10-10)
Platform: x86_64-pc-linux-gnu (64-bit)
Running under: Ubuntu 20.04.2 LTS
Matrix products: default
BLAS: /usr/lib/x86_64-linux-gnu/openblas-pthread/libblas.so.3
LAPACK: /usr/lib/x86_64-linux-gnu/openblas-pthread/liblapack.so.3
locale:
[1] LC_CTYPE=en_US.UTF-8 LC_NUMERIC=C
[3] LC_TIME=sv_SE.UTF-8 LC_COLLATE=en_US.UTF-8
[5] LC_MONETARY=sv_SE.UTF-8 LC_MESSAGES=en_US.UTF-8
[7] LC_PAPER=sv_SE.UTF-8 LC_NAME=C
[9] LC_ADDRESS=C LC_TELEPHONE=C
[11] LC_MEASUREMENT=sv_SE.UTF-8 LC_IDENTIFICATION=C
attached base packages:
[1] stats graphics grDevices utils datasets methods base
other attached packages:
[1] knitr_1.30 dplyr_1.0.3 reshape2_1.4.4 ggplot2_3.3.3
[5] wigglescout_0.12.8 workflowr_1.6.2
loaded via a namespace (and not attached):
[1] MatrixGenerics_1.2.0 Biobase_2.50.0
[3] assertthat_0.2.1 askpass_1.1
[5] stats4_4.0.3 GenomeInfoDbData_1.2.4
[7] Rsamtools_2.6.0 yaml_2.2.1
[9] globals_0.14.0 pillar_1.4.7
[11] lattice_0.20-41 glue_1.4.2
[13] digest_0.6.27 GenomicRanges_1.42.0
[15] RColorBrewer_1.1-2 promises_1.1.1
[17] XVector_0.30.0 colorspace_2.0-0
[19] htmltools_0.5.1 httpuv_1.5.4
[21] Matrix_1.3-2 plyr_1.8.6
[23] XML_3.99-0.5 pkgconfig_2.0.3
[25] listenv_0.8.0 zlibbioc_1.36.0
[27] purrr_0.3.4 scales_1.1.1
[29] whisker_0.4 later_1.1.0.1
[31] BiocParallel_1.24.1 git2r_0.27.1
[33] tibble_3.0.5 openssl_1.4.3
[35] generics_0.1.0 farver_2.0.3
[37] IRanges_2.24.1 ellipsis_0.3.1
[39] withr_2.4.0 SummarizedExperiment_1.20.0
[41] furrr_0.2.1 BiocGenerics_0.36.0
[43] magrittr_2.0.1 crayon_1.3.4
[45] evaluate_0.14 fs_1.5.0
[47] future_1.21.0 parallelly_1.23.0
[49] tools_4.0.3 lifecycle_0.2.0
[51] matrixStats_0.57.0 stringr_1.4.0
[53] S4Vectors_0.28.1 munsell_0.5.0
[55] DelayedArray_0.16.0 Biostrings_2.58.0
[57] compiler_4.0.3 GenomeInfoDb_1.26.2
[59] rlang_0.4.10 grid_4.0.3
[61] RCurl_1.98-1.2 rstudioapi_0.13
[63] bitops_1.0-6 labeling_0.4.2
[65] rmarkdown_2.6 gtable_0.3.0
[67] codetools_0.2-18 DBI_1.1.0
[69] R6_2.5.0 GenomicAlignments_1.26.0
[71] rtracklayer_1.50.0 rprojroot_2.0.2
[73] stringi_1.5.3 parallel_4.0.3
[75] Rcpp_1.0.6 vctrs_0.3.6
[77] tidyselect_1.1.0 xfun_0.20