Last updated: 2021-02-16
Checks: 7 0
Knit directory: Mouse_PRKO_RNAseq_bulk/
This reproducible R Markdown analysis was created with workflowr (version 1.6.2). The Checks tab describes the reproducibility checks that were applied when the results were created. The Past versions tab lists the development history.
Great! Since the R Markdown file has been committed to the Git repository, you know the exact version of the code that produced these results.
Great job! The global environment was empty. Objects defined in the global environment can affect the analysis in your R Markdown file in unknown ways. For reproduciblity it’s best to always run the code in an empty environment.
The command set.seed(20210216)
was run prior to running the code in the R Markdown file. Setting a seed ensures that any results that rely on randomness, e.g. subsampling or permutations, are reproducible.
Great job! Recording the operating system, R version, and package versions is critical for reproducibility.
Nice! There were no cached chunks for this analysis, so you can be confident that you successfully produced the results during this run.
Great job! Using relative paths to the files within your workflowr project makes it easier to run your code on other machines.
Great! You are using Git for version control. Tracking code development and connecting the code version to the results is critical for reproducibility.
The results in this page were generated with repository version 7f1a156. See the Past versions tab to see a history of the changes made to the R Markdown and HTML files.
Note that you need to be careful to ensure that all relevant files for the analysis have been committed to Git prior to generating the results (you can use wflow_publish
or wflow_git_commit
). workflowr only checks the R Markdown file, but you know if there are other scripts or data files that it depends on. Below is the status of the Git repository when the results were generated:
Ignored files:
Ignored: .Rproj.user/
Untracked files:
Untracked: Mus_musculus.GRCm38.96.fulllength.saf
Untracked: analysis/00.WorkFlowR_setting.R
Untracked: header.sam
Untracked: logCPM_mrna_fulllen_pe_strrev_q30.mx.PRKO.all.fix_filt.csv
Untracked: output/20200211_PRKO_RNA_samplesheet.txt
Untracked: output/mrna_fulllen_pe_strrev_q30.mx.PRKO.all.fix_filt
Untracked: output/mrna_fulllen_pe_strrev_q30.mx.PRKO.unfiltered
Untracked: output/mrna_fulllen_pe_strrev_q30.mx.chr
Unstaged changes:
Modified: analysis/index.Rmd
Note that any generated files, e.g. HTML, png, CSS, etc., are not included in this status report because it is ok for generated content to have uncommitted changes.
These are the previous versions of the repository in which changes were made to the R Markdown (analysis/02.Trimming_and_Mapping.Rmd
) and HTML (docs/02.Trimming_and_Mapping.html
) files. If you’ve configured a remote Git repository (see ?wflow_git_remote
), click on the hyperlinks in the table below to view the files as they were in that past version.
File | Version | Author | Date | Message |
---|---|---|---|---|
Rmd | 7f1a156 | evangelynsim | 2021-02-16 | wflow_publish(c(“analysis/01.Generate_reference_genome.Rmd”, |
Following sequencing and obtaining .fastq.gz file, the first step is to perform trimming and mapping of the sequencing data to generate bam files. All these steps were performed using bash code.
Bam files were then used for read counts to generate a count matrix.
Mouse AAV-PGR bulk RNA-seq were performed using paiered end sequencing method and below are the scripts for trimming and mapping paired end sequencing read.
#!/bin/bash
# function to run skewer quality trimming
runskew(){
FQZ1=$1
FQZ2=`echo $FQZ1 | sed 's/_R1.fastq.gz/_R2.fastq.gz/'`
skewer -t 8 -q 20 $FQZ1 $FQZ2
}
export -f runskew
# actually run skewer
parallel -j3 runskew ::: *_R1.fastq.gz
It will generate the following 4 outputs for individual .fastq.gz file:
#!/bin/bash
DIR=/group/card2/Evangelyn_Sim/Sequencing_ATAC_RNA/refgenome/star
GTF=/group/card2/Evangelyn_Sim/Sequencing_ATAC_RNA/refgenome/Mus_musculus.GRCm38.96.gtf
for FQ1 in `ls *1.fastq-trimmed-pair1.fastq` ; do
FQ2=`echo $FQ1 | sed 's/1.fastq-trimmed-pair1.fastq/1.fastq-trimmed-pair2.fastq/'`
BASE=`echo $FQ1 | sed 's/_1.fastq-trimmed-pair1.fastq//'`
STAR --genomeLoad NoSharedMemory --genomeDir $DIR --readFilesIn $FQ1 $FQ2 --runThreadN 30 \
--sjdbGTFfile $GTF --outSAMattributes NH HI NM MD
rm $FQ1 $FQ2
mv Aligned.out.sam ${BASE}.STAR.sam
mv Log.final.out ${BASE}_starlog.txt
( samtools view -uSh ${BASE}.STAR.sam | samtools sort -o ${BASE}.STAR.bam
rm ${BASE}.STAR.sam
samtools index ${BASE}.STAR.bam
samtools flagstat ${BASE}.STAR.bam > ${BASE}.STAR.bam.stats ) &
done
STAR genomeLoad Remove --genomeDir $DIR
wait
ls: cannot access *1.fastq-trimmed-pair1.fastq: No such file or directory
bash: line 24: STAR: command not found
Make a directory called “merged” and ln all .bam files to the folder and perform the following.
#!/bin/bash
samtools view -H `ls *bam | head -1` > header.sam
for BASE in `ls *bam | cut -d '_' -f2 | sort -u ` ; do
rm $BASE.mg.bam
samtools merge -h header.sam $BASE.mg.bam *${BASE}*bam &
done
wait
ls: cannot access *bam: No such file or directory
bash: line 2: samtools: command not found
ls: cannot access *bam: No such file or directory
#!/bin/bash
SAF=/group/card2/Evangelyn_Sim/Sequencing_ATAC_RNA/refgenome/Mus_musculus.GRCm38.96.fulllength.saf
OUT=mrna_fulllen_pe_strrev_q30.mx
#featureCounts -p -Q 30 -T 20 -s 2 -a $SAF -F SAF -o $OUT *bam
#!/bin/bash
for MX in `ls *mx` ; do
sed 1d $MX | sed 's/.mg.bam//g' > $MX.all
sed 1d $MX | cut -f1-6 | sed 's/.mg.bam//g' > $MX.chr
sed 1d $MX | cut -f1,7- | sed 's/.mg.bam//g' > $MX.PR.fix
done
wait
ls: cannot access *mx: No such file or directory
Filtering out low counts genes by running the following filter.sh as
bash filter.sh hrna_dev_mf_fulllen_se_strrev_q30.mx.all.fix
filter.sh
head -1 $1 > ${1}_filt
awk '{
min = max = sum = $2; # Initialize to the first value (2nd field)
sum2 = $2 * $2 # Running sum of squares
for (n=3; n <= NF; n++) { # Process each value on the line
if ($n < min) min = $n # Current minimum
if ($n > max) max = $n # Current maximum
sum += $n; # Running sum of values
sum2 += $n * $n # Running sum of squares
}
print sum/(NF-1) ;
}' $1 > avg
paste avg $1 | awk '$1 >= 10' | cut -f2- | tr ' ' '\t' >> ${1}_filt
rm avg
sessionInfo()
R version 3.6.1 (2019-07-05)
Platform: x86_64-pc-linux-gnu (64-bit)
Running under: CentOS Linux 7 (Core)
Matrix products: default
BLAS: /hpc/software/installed/R/3.6.1/lib64/R/lib/libRblas.so
LAPACK: /hpc/software/installed/R/3.6.1/lib64/R/lib/libRlapack.so
locale:
[1] LC_CTYPE=en_US.UTF-8 LC_NUMERIC=C
[3] LC_TIME=en_US.UTF-8 LC_COLLATE=en_US.UTF-8
[5] LC_MONETARY=en_US.UTF-8 LC_MESSAGES=en_US.UTF-8
[7] LC_PAPER=en_US.UTF-8 LC_NAME=C
[9] LC_ADDRESS=C LC_TELEPHONE=C
[11] LC_MEASUREMENT=en_US.UTF-8 LC_IDENTIFICATION=C
attached base packages:
[1] stats graphics grDevices utils datasets methods base
other attached packages:
[1] workflowr_1.6.2
loaded via a namespace (and not attached):
[1] Rcpp_1.0.5 rstudioapi_0.11 whisker_0.4 knitr_1.30
[5] magrittr_1.5 R6_2.5.0 rlang_0.4.7 stringr_1.4.0
[9] tools_3.6.1 xfun_0.18 git2r_0.27.1 htmltools_0.5.0
[13] ellipsis_0.3.1 rprojroot_1.3-2 yaml_2.2.1 digest_0.6.27
[17] tibble_3.0.3 lifecycle_0.2.0 crayon_1.3.4 later_1.1.0.1
[21] vctrs_0.3.2 promises_1.1.1 fs_1.5.0 glue_1.4.2
[25] evaluate_0.14 rmarkdown_2.5 stringi_1.5.3 compiler_3.6.1
[29] pillar_1.4.6 backports_1.1.10 httpuv_1.5.4 pkgconfig_2.0.3