Last updated: 2023-02-27

Checks: 7 0

Knit directory: Bio326/

This reproducible R Markdown analysis was created with workflowr (version 1.7.0). The Checks tab describes the reproducibility checks that were applied when the results were created. The Past versions tab lists the development history.

R Markdown file: up-to-date

Great! Since the R Markdown file has been committed to the Git repository, you know the exact version of the code that produced these results.

Environment: empty

Great job! The global environment was empty. Objects defined in the global environment can affect the analysis in your R Markdown file in unknown ways. For reproduciblity it’s best to always run the code in an empty environment.

Seed: set.seed(20210128)

The command set.seed(20210128) was run prior to running the code in the R Markdown file. Setting a seed ensures that any results that rely on randomness, e.g. subsampling or permutations, are reproducible.

Session information: recorded

Great job! Recording the operating system, R version, and package versions is critical for reproducibility.

Cache: none

Nice! There were no cached chunks for this analysis, so you can be confident that you successfully produced the results during this run.

File paths: relative

Great job! Using relative paths to the files within your workflowr project makes it easier to run your code on other machines.

Repository version: 5ccee4b

Great! You are using Git for version control. Tracking code development and connecting the code version to the results is critical for reproducibility.

The results in this page were generated with repository version 5ccee4b. See the Past versions tab to see a history of the changes made to the R Markdown and HTML files.

Note that you need to be careful to ensure that all relevant files for the analysis have been committed to Git prior to generating the results (you can use wflow_publish or wflow_git_commit). workflowr only checks the R Markdown file, but you know if there are other scripts or data files that it depends on. Below is the status of the Git repository when the results were generated:


Ignored files:
    Ignored:    .DS_Store
    Ignored:    .RData
    Ignored:    .Rhistory
    Ignored:    .Rproj.user/
    Ignored:    analysis/.DS_Store
    Ignored:    analysis/.Rhistory
    Ignored:    analysis/popgen.simu.nb.html

Untracked files:
    Untracked:  BIO326 URL genome annotatin computer lab_24_MAR_2021.docx
    Untracked:  BIO326-121VGenomesequencingBIO326-121VGenomsekvensering;verktøyoganalyser-BIO326-121VGenomesequencing_PhillipByronPope.pdf
    Untracked:  BIO326-RNAseq.pptx
    Untracked:  BIO326-genome/
    Untracked:  BIO326.MS.10th_FEB_2021function.pptx
    Untracked:  BIO326_Introduction to sequence technology and protocols_3rd_FEB_2021.pdf
    Untracked:  BIO326_Introduction to sequence technology and protocols_3rd_FEB_2021.pptx
    Untracked:  BIO326_RNAseq_5th_FEB_2021.pptx
    Untracked:  BIO326_SQK-RAD004 DNA challenge.docx
    Untracked:  BIO326_visual_30_APR_2021.pptx
    Untracked:  Bio326.2022.1.Rmd
    Untracked:  Bio326.genome.html
    Untracked:  Bio326_2023/
    Untracked:  Nanopore_SumStatQC_Tutorial.Rmd
    Untracked:  PCRdemo.R
    Untracked:  Pig_mutation_hist.csv
    Untracked:  PopGenBio326.322/
    Untracked:  RNAseq.Rplot.pdf
    Untracked:  RNAseq_Jun_2022.pdf
    Untracked:  RNAseq_Jun_2022.pptx
    Untracked:  Untitled.R
    Untracked:  [eng]BIO326-121VGenomesequencingBIO326-121VGenomsekvensering;verktøyoganalyser-BIO326-121VGenomesequencing_PhillipByronPope.mht
    Untracked:  [eng]BIO326-121VGenomesequencingBIO326-121VGenomsekvensering;verktøyoganalyser-BIO326-121VGenomesequencing_PhillipByronPope.pdf
    Untracked:  analysis/Bio326_2023.log
    Untracked:  analysis/Bio326_2023.tex
    Untracked:  analysis/Evolution_for_lab.Rmd
    Untracked:  analysis/_site/
    Untracked:  prepare.txt
    Untracked:  samples.xlsx
    Untracked:  test/
    Untracked:  trial/
    Untracked:  vis.xlsx
    Untracked:  workflowR.bio326.R

Unstaged changes:
    Modified:   analysis/RNAseq_for_lab.Rmd
    Deleted:    analysis/synchro.Rmd

Note that any generated files, e.g. HTML, png, CSS, etc., are not included in this status report because it is ok for generated content to have uncommitted changes.

These are the previous versions of the repository in which changes were made to the R Markdown (analysis/Bio326_2023.Rmd) and HTML (docs/Bio326_2023.html) files. If you’ve configured a remote Git repository (see ?wflow_git_remote), click on the hyperlinks in the table below to view the files as they were in that past version.

File	Version	Author	Date	Message
Rmd	5ccee4b	mariesaitou	2023-02-27	wflow_publish(c("analysis//Bio326_2023.Rmd"))

Overview of the tutorial

Last time, you started sequencing of cattle genome using Nanopore MinION. For the following three sessions we will learn:

How to use Orion and conduct genome analysis
Quality check, Read filtering, mapping to the reference genome and variant calling
How to interpret summary statistics of Nanopore sequence data
How to interpret variant data

In this tutorial, we will investigate a small subset of bull genome sequence.

You will have an access to the whole datasets later for your reports as soon as the computation is done.

Also, Matthew and I prepared some questions in each section.

Please discuss and try the quizzes to deepen your understandig on Nanopore data.

Review the previous practice

DAY1

Connect to Orion and the preparation

Go to https://orion.nmbu.no/ at NMBU or with VPN.

In the Terminal/Command prompt, go to your directory. Review: the concept of current directry

cd your_directory

Let’s make a directory for analysis and enter in it.

mkdir bull_analysis # make directory "bull_analysis"
cd bull_analysis # set the current directory "bull_analysis"

Now, you will inspect the fastq file, which contains Nanopore read information.

Check the read quality by Nanoplot

Browse the inside of the read (fastq) file

Review: look into a file content in a command line

zcat /net/fs-2/scale/OrionStore/Courses/BIO326/EUK/bull_analysis/demo_data/bull_demodata_fastq.gz | more

How a fastq file looks.

Each entry in a FASTQ files consists of 4 lines:

A sequence identifier with information about the sequencing run. (run time, run ID, cflow cell id … )

2.The sequence (the base calls; A, C, T, G and N).

A separator, which is simply a plus (+) sign.
The base call quality scores. These are Phred +33 encoded, using ASCII characters to represent the numerical quality scores.” quality score sheet

by Illumina Knowledge

Get basic stats of the fastq file

“zcat”-> look inside

“wc” -> word count

“-l” -> line

zcat /net/fs-2/scale/OrionStore/Courses/BIO326/EUK/bull_analysis/demo_data/bull_demodata_fastq.gz | wc -l

Discussion Point

Now you got the number of lines in the fastq file.

How many sequence reads are in the fastq file?

Need Help?

We see that there are 96000 lines in the fastq file.

As we learned that “each entry in a FASTQ files consists of 4 lines”, one read is corresponding to four lines. So in this file we have 96000/4 = 24000 reads.

Run Nanoplot

The original fastq files may contain low quality reads. In this step, we will use “Nanoplot” to see the quality and lentgh of each read.

“Singularity” is a toolset on Orion to execute software. A variety of different bioinformatics tools are available in Singularity.

Make a slurm script like below and run it.

Review: make a slurm script and run it by sbatch



#!/bin/bash
#SBATCH --job-name=Nanoplot  # sensible name for the job
#SBATCH --mail-user=yourname@nmbu.no # Email me when job is done.
#SBATCH --mem=12G 
#SBATCH --ntasks=1   
#SBATCH --cpus-per-task=8
#SBATCH --mail-type=END


singularity exec /cvmfs/singularity.galaxyproject.org/all/nanoplot:1.41.0--pyhdfd78af_0 NanoPlot -t 8  --fastq /net/fs-2/scale/OrionStore/Courses/BIO326/EUK/bull_analysis/demo_data/bull_demodata_fastq.gz --plots dot   --no_supplementary --no_static --N50 -p before

Nanoplot will generate the result files, named “before”xxx. Lets look into them…

Nanofilt


#!/bin/bash
#SBATCH --job-name=Nanoplot  # sensible name for the job
#SBATCH --mail-user=yourname@nmbu.no # Email me when job is done.
#SBATCH --mem=12G 
#SBATCH --ntasks=1   
#SBATCH --mail-type=END

gunzip -c /net/fs-2/scale/OrionStore/Courses/BIO326/EUK/bull_analysis/demo_data/bull_demodata_fastq.gz | singularity exec  /cvmfs/singularity.galaxyproject.org/all/nanofilt:2.8.0--py_0 NanoFilt -q 12 -l 500 | gzip > cleaned.bull.fastq.gz

-l, Filter on a minimum read length

-q, Filter on a minimum average read quality score

Lets do Nanoplot again on the filtered reads to compare the before and after cleaning sequences

Need help?


#!/bin/bash
#SBATCH --job-name=Nanoplot  # sensible name for the job
#SBATCH --mail-user=yourname@nmbu.no # Email me when job is done.
#SBATCH --mem=12G 
#SBATCH --ntasks=1   
#SBATCH --cpus-per-task=8
#SBATCH --mail-type=END

singularity exec /cvmfs/singularity.galaxyproject.org/all/nanoplot:1.41.0--pyhdfd78af_0 NanoPlot -t 8  --fastq cleaned.bull.fastq.gz  --N50  --no_supplementary --no_static  --plots dot   -p after

Discussion topics.

The end of Day1. Well done!

DAY2

Find out where “minimap2” is in Singularity

minimap2
find /cvmfs/singularity.galaxyproject.org/all/  -name minimap2*  

/cvmfs/singularity.galaxyproject.org/all/minimap2:2.24--h7132678_1

run Minimap and map the reads to the reference genome

singularity exec /cvmfs/singularity.galaxyproject.org/all/minimap2:2.24--h7132678_1 minimap2 -t 8 -a Bos_taurus.fa.gz cleaned.bull.fastq.gz > bull.sam

Browse the mapped file

cat bull.sam | head bull.sam

Conversion

singularity exec  /cvmfs/singularity.galaxyproject.org/all/samtools:1.16.1--h6899075_1 samtools view -S -b bull.sam > bull0.bam

singularity exec  /cvmfs/singularity.galaxyproject.org/all/samtools:1.16.1--h6899075_1 samtools sort bull0.bam -o bull.bam

singularity exec  /cvmfs/singularity.galaxyproject.org/all/samtools:1.16.1--h6899075_1 samtools index -M  bull.bam

Error correction with Pilon/Medaka

(Skip this time as it takes time… You will learn the error correction in the prokaryotic part. )

Variant Calling using Sniffles

singularity exec /cvmfs/singularity.galaxyproject.org/all/sniffles:2.0.7--pyhdfd78af_0 sniffles --input  bull.bam --vcf bull.vcf

Inspect variants

DAY3

Now you have variants! Lets see what genes are affected by the variants.

sessionInfo()

R version 4.2.2 (2022-10-31)
Platform: x86_64-apple-darwin17.0 (64-bit)
Running under: macOS Big Sur ... 10.16

Matrix products: default
BLAS:   /Library/Frameworks/R.framework/Versions/4.2/Resources/lib/libRblas.0.dylib
LAPACK: /Library/Frameworks/R.framework/Versions/4.2/Resources/lib/libRlapack.dylib

locale:
[1] en_US.UTF-8/en_US.UTF-8/en_US.UTF-8/C/en_US.UTF-8/en_US.UTF-8

attached base packages:
[1] stats     graphics  grDevices utils     datasets  methods   base     

other attached packages:
[1] workflowr_1.7.0

loaded via a namespace (and not attached):
 [1] Rcpp_1.0.10      compiler_4.2.2   pillar_1.8.1     bslib_0.4.2     
 [5] later_1.3.0      git2r_0.31.0     jquerylib_0.1.4  tools_4.2.2     
 [9] getPass_0.2-2    digest_0.6.31    jsonlite_1.8.4   evaluate_0.20   
[13] lifecycle_1.0.3  tibble_3.1.8     pkgconfig_2.0.3  rlang_1.0.6     
[17] cli_3.6.0        rstudioapi_0.14  yaml_2.3.7       xfun_0.37       
[21] fastmap_1.1.0    httr_1.4.4       stringr_1.5.0    knitr_1.42      
[25] fs_1.6.1         vctrs_0.5.2      sass_0.4.5       rprojroot_2.0.3 
[29] glue_1.6.2       R6_2.5.1         processx_3.8.0   fansi_1.0.4     
[33] rmarkdown_2.20   callr_3.7.3      magrittr_2.0.3   whisker_0.4.1   
[37] ps_1.7.2         promises_1.2.0.1 htmltools_0.5.4  httpuv_1.6.8    
[41] utf8_1.2.3       stringi_1.7.12   cachem_1.0.6

Bio326_2023

Marie Saitou

2023-01-30