Menu Configurator for Pithy with screen
Config load
Select config file
Additional input required
These Home Assistant sensor entities were found in the config:
Please copy all
template entities from this list into the box below.
Use this format (note there are two spaces before entity names):
entity_name:
value_template: "{{ }}"
another_entity:
value_template: "{{ }}"
...
Load config
Basic
Device type:What kind of device do you have
-- Please choose one --
Screen
Screen Plus
Counter
Screen Plus Legacy
Unit name:Name for this particular device, e.g. pithy_screen_bedroom. Must be lower case, no spaces, no symbols apart from udnerscores.
Friendly name:Any name you like. Will be used to name internal sensors (temperature, humidity, PIR) if installed.
Board platform:If you're unsure, leave as is
ESP8266
Board name:If you're unsure, leave as is
Wemos D1 mini
WiFi
Your WiFi credentials:Enter the WiFi credentials to which you want your device to connect to SSID:WiFi name Password: Fallback WiFi AP credentials:If connection fails, the device will create its own WiFi hotspot with these credentials SSID:WiFi name Password:
Management
API password:For connecting to Home Assistant OTA password:For over-the-air updates (flashing)
Hardware
PIR pin:If you're unsure, leave as is
Button pin:If you're unsure, leave as is
I²C data pin:If you're unsure, leave as is
I²C clock pin:If you're unsure, leave as is
Encoder pin A:If you're unsure, leave as is
Encoder pin B:If you're unsure, leave as is
Encoder switch pin:If you're unsure, leave as is
Create config
Download config file
Scroll down for Home Assistant config
Pithy config: Home Assistant config:Put this into your "sensor:" config in HA config file