Supplementary figures

Last updated: 2023-06-26

Checks: 6 1

Knit directory: Cardiotoxicity/

This reproducible R Markdown analysis was created with workflowr (version 1.7.0). The Checks tab describes the reproducibility checks that were applied when the results were created. The Past versions tab lists the development history.

R Markdown file: up-to-date

Great! Since the R Markdown file has been committed to the Git repository, you know the exact version of the code that produced these results.

Environment: empty

Great job! The global environment was empty. Objects defined in the global environment can affect the analysis in your R Markdown file in unknown ways. For reproduciblity it’s best to always run the code in an empty environment.

Seed: set.seed(20230109)

The command set.seed(20230109) was run prior to running the code in the R Markdown file. Setting a seed ensures that any results that rely on randomness, e.g. subsampling or permutations, are reproducible.

Session information: recorded

Great job! Recording the operating system, R version, and package versions is critical for reproducibility.

Cache: detected

The following chunks had caches available:

Fig S1
Fig S10 Drug-specific genes and pathways
Fig S12 Cormotif genes
Fig S12 Cormotif
Fig S2
Fig S3
Fig S4
Fig S5
Fig S6
Fig S7
Fig S8 volcano
Fig S9
Fig venntimepoints
packages

To ensure reproducibility of the results, delete the cache directory Supplementary_figures_cache and re-run the analysis. To have workflowr automatically delete the cache directory prior to building the file, set delete_cache = TRUE when running wflow_build() or wflow_publish().

File paths: relative

Great job! Using relative paths to the files within your workflowr project makes it easier to run your code on other machines.

Repository version: 6e50959

Great! You are using Git for version control. Tracking code development and connecting the code version to the results is critical for reproducibility.

The results in this page were generated with repository version 6e50959. See the Past versions tab to see a history of the changes made to the R Markdown and HTML files.

Note that you need to be careful to ensure that all relevant files for the analysis have been committed to Git prior to generating the results (you can use wflow_publish or wflow_git_commit). workflowr only checks the R Markdown file, but you know if there are other scripts or data files that it depends on. Below is the status of the Git repository when the results were generated:


Ignored files:
    Ignored:    .RData
    Ignored:    .Rhistory
    Ignored:    .Rproj.user/
    Ignored:    analysis/Supplementary_figures_cache/
    Ignored:    analysis/figure/
    Ignored:    data/41588_2018_171_MOESM3_ESMeQTL_ST2_for paper.csv
    Ignored:    data/Arr_GWAS.txt
    Ignored:    data/Arr_geneset.RDS
    Ignored:    data/BC_cell_lines.csv
    Ignored:    data/CADGWASgene_table.csv
    Ignored:    data/CAD_geneset.RDS
    Ignored:    data/Clamp_Summary.csv
    Ignored:    data/Cormotif_24_k1-5_raw.RDS
    Ignored:    data/DAgostres24.RDS
    Ignored:    data/DAtable1.csv
    Ignored:    data/DDEMresp_list.csv
    Ignored:    data/DDE_reQTL.txt
    Ignored:    data/DDEresp_list.csv
    Ignored:    data/DEG-GO/
    Ignored:    data/DEG_cormotif.RDS
    Ignored:    data/DF_Plate_Peak.csv
    Ignored:    data/DRC48hoursdata.csv
    Ignored:    data/Da24counts.txt
    Ignored:    data/Dx24counts.txt
    Ignored:    data/Dx_reQTL_specific.txt
    Ignored:    data/Ep24counts.txt
    Ignored:    data/GOIsig.csv
    Ignored:    data/GOplots.R
    Ignored:    data/GTEX_setsimple.csv
    Ignored:    data/GTEx_gene_list.csv
    Ignored:    data/HFGWASgene_table.csv
    Ignored:    data/HF_geneset.RDS
    Ignored:    data/Heart_Left_Ventricle.v8.egenes.txt
    Ignored:    data/Hf_GWAS.txt
    Ignored:    data/K_cluster
    Ignored:    data/K_cluster_kisthree.csv
    Ignored:    data/K_cluster_kistwo.csv
    Ignored:    data/LD50_05via.csv
    Ignored:    data/LDH48hoursdata.csv
    Ignored:    data/Mt24counts.txt
    Ignored:    data/RINsamplelist.txt
    Ignored:    data/Seonane2019supp1.txt
    Ignored:    data/TOP2Bi-24hoursGO_analysis.csv
    Ignored:    data/TR24counts.txt
    Ignored:    data/Top2biresp_cluster24h.csv
    Ignored:    data/Viabilitylistfull.csv
    Ignored:    data/allexpressedgenes.txt
    Ignored:    data/allgenes.txt
    Ignored:    data/allmatrix.RDS
    Ignored:    data/averageviabilitytable.RDS
    Ignored:    data/avgLD50.RDS
    Ignored:    data/backGL.txt
    Ignored:    data/cormotif_3hk1-8.RDS
    Ignored:    data/cormotif_initalK5.RDS
    Ignored:    data/cormotif_initialK5.RDS
    Ignored:    data/cormotif_initialall.RDS
    Ignored:    data/counts24hours.RDS
    Ignored:    data/cpmcount.RDS
    Ignored:    data/cpmnorm_counts.csv
    Ignored:    data/crispr_genes.csv
    Ignored:    data/ctnnt_results.txt
    Ignored:    data/cvd_GWAS.txt
    Ignored:    data/dat_cpm.RDS
    Ignored:    data/data_outline.txt
    Ignored:    data/efit2.RDS
    Ignored:    data/efit2_final.RDS
    Ignored:    data/efit2results.RDS
    Ignored:    data/ensembl_backup.RDS
    Ignored:    data/ensgtotal.txt
    Ignored:    data/filcpm_counts.RDS
    Ignored:    data/filenameonly.txt
    Ignored:    data/filtered_cpm_counts.csv
    Ignored:    data/filtered_raw_counts.csv
    Ignored:    data/filtermatrix_x.RDS
    Ignored:    data/folder_05top/
    Ignored:    data/geneDoxonlyQTL.csv
    Ignored:    data/gene_corr_df.RDS
    Ignored:    data/gene_corr_frame.RDS
    Ignored:    data/gene_prob_tran3h.RDS
    Ignored:    data/gene_probabilityk5.RDS
    Ignored:    data/gostresTop2bi_ER.RDS
    Ignored:    data/gostresTop2bi_LR
    Ignored:    data/gostresTop2bi_LR.RDS
    Ignored:    data/gostresTop2bi_TI.RDS
    Ignored:    data/gostrescoNR
    Ignored:    data/gtex/
    Ignored:    data/heartgenes.csv
    Ignored:    data/individualDRCfile.RDS
    Ignored:    data/individual_DRC48.RDS
    Ignored:    data/individual_LDH48.RDS
    Ignored:    data/knowfig4.csv
    Ignored:    data/knowfig5.csv
    Ignored:    data/ld50_table.csv
    Ignored:    data/mymatrix.RDS
    Ignored:    data/nonresponse_cluster24h.csv
    Ignored:    data/norm_LDH.csv
    Ignored:    data/norm_counts.csv
    Ignored:    data/old_sets/
    Ignored:    data/plan2plot.png
    Ignored:    data/raw_counts.csv
    Ignored:    data/response_cluster24h.csv
    Ignored:    data/sigVDA24.txt
    Ignored:    data/sigVDA3.txt
    Ignored:    data/sigVDX24.txt
    Ignored:    data/sigVDX3.txt
    Ignored:    data/sigVEP24.txt
    Ignored:    data/sigVEP3.txt
    Ignored:    data/sigVMT24.txt
    Ignored:    data/sigVMT3.txt
    Ignored:    data/sigVTR24.txt
    Ignored:    data/sigVTR3.txt
    Ignored:    data/siglist.RDS
    Ignored:    data/siglist_final.RDS
    Ignored:    data/slope_table.csv
    Ignored:    data/supp_normLDH48.RDS
    Ignored:    data/supp_pca_all_anno.RDS
    Ignored:    data/table3a.omar
    Ignored:    data/toplistall.RDS
    Ignored:    data/tvl24hour.txt
    Ignored:    data/tvl24hourw.txt
    Ignored:    data/venn_code.R
    Ignored:    data/viability.RDS

Untracked files:
    Untracked:  .RDataTmp
    Untracked:  .RDataTmp1
    Untracked:  .RDataTmp2
    Untracked:  OmicNavigator_learn.R
    Untracked:  code/DRC_plotfigure1.png
    Untracked:  code/cpm_boxplot.R
    Untracked:  code/extracting_ggplot_data.R
    Untracked:  code/fig1plot.png
    Untracked:  code/figurelegeddrc.png
    Untracked:  cormotif_probability_genelist.csv
    Untracked:  individual-legenddark2.png
    Untracked:  installed_old.rda
    Untracked:  motif_ER.txt
    Untracked:  motif_LR.txt
    Untracked:  motif_NR.txt
    Untracked:  motif_TI.txt
    Untracked:  output/DNRvenn.RDS
    Untracked:  output/DOXvenn.RDS
    Untracked:  output/EPIvenn.RDS
    Untracked:  output/MTXvenn.RDS
    Untracked:  output/Volcanoplot_10
    Untracked:  output/Volcanoplot_10.RDS
    Untracked:  output/allfinal_sup10.RDS
    Untracked:  output/motif_ERrep.RDS
    Untracked:  output/motif_LRrep.RDS
    Untracked:  output/motif_NRrep.RDS
    Untracked:  output/motif_TI_rep.RDS
    Untracked:  output/output-old/
    Untracked:  output/supplementary_motif_list_GO.RDS
    Untracked:  output/toptablebydrug.RDS
    Untracked:  output/x_counts.RDS
    Untracked:  reneebasecode.R

Unstaged changes:
    Modified:   analysis/Cormotifcluster_analysis.Rmd
    Modified:   analysis/DEG-GO_analysis.Rmd
    Modified:   analysis/DRC_analysis.Rmd
    Modified:   analysis/Knowles2019.Rmd
    Modified:   analysis/LDH_analysis.Rmd
    Modified:   analysis/RNAseqanalysis.Rmd

Note that any generated files, e.g. HTML, png, CSS, etc., are not included in this status report because it is ok for generated content to have uncommitted changes.

These are the previous versions of the repository in which changes were made to the R Markdown (analysis/Supplementary_figures.Rmd) and HTML (docs/Supplementary_figures.html) files. If you’ve configured a remote Git repository (see ?wflow_git_remote), click on the hyperlinks in the table below to view the files as they were in that past version.

File	Version	Author	Date	Message
Rmd	6e50959	reneeisnowhere	2023-06-26	Adding supplementary figures
html	dace8ba	reneeisnowhere	2023-06-23	Build site.
Rmd	2b109c3	reneeisnowhere	2023-06-23	adding some supp graphs
Rmd	c1d667f	reneeisnowhere	2023-06-23	updating the codes at Friday start.

Warning: The above code chunk cached its results, but it won’t be re-run if previous chunks it depends on are updated. If you need to use caching, it is highly recommended to also set knitr::opts_chunk\(set(autodep = TRUE)</code> at the top of the file (in a chunk that is not cached). Alternatively, you can customize the option <code>dependson</code> for each individual chunk that is cached. Using either <code>autodep</code> or <code>dependson</code> will remove this warning. See the <a href="https://yihui.name/knitr/options/#cache" >knitr cache options</a> for more details. </p> </div> ### Fig. S1 <img src="figure/Supplementary_figures.Rmd/Fig S1-1.svg" width="2100" style="display: block; margin: auto;" /><table class=" lightable-paper lightable-striped table" style='font-family: "Arial Narrow", arial, helvetica, sans-serif; width: auto !important; margin-left: auto; margin-right: auto; font-size: 18px; width: auto !important; margin-left: auto; margin-right: auto;'> <caption style="font-size: initial !important;">Stats summary of cTNNT+ FACs readings</caption> <thead> <tr> <th style="text-align:left;"> </th> <th style="text-align:left;"> Percent </th> <th style="text-align:left;"> Individual </th> </tr> </thead> <tbody> <tr> <td style="text-align:left;"> </td> <td style="text-align:left;"> Min. :63.10 </td> <td style="text-align:left;"> Length:17 </td> </tr> <tr> <td style="text-align:left;"> </td> <td style="text-align:left;"> 1st Qu.:91.80 </td> <td style="text-align:left;"> Class :character </td> </tr> <tr> <td style="text-align:left;"> </td> <td style="text-align:left;"> Median :96.65 </td> <td style="text-align:left;"> Mode :character </td> </tr> <tr> <td style="text-align:left;"> </td> <td style="text-align:left;"> Mean :92.80 </td> <td style="text-align:left;"> NA </td> </tr> <tr> <td style="text-align:left;"> </td> <td style="text-align:left;"> 3rd Qu.:98.50 </td> <td style="text-align:left;"> NA </td> </tr> <tr> <td style="text-align:left;"> </td> <td style="text-align:left;"> Max. :99.90 </td> <td style="text-align:left;"> NA </td> </tr> </tbody> </table> <div class="alert alert-warning"> <p><strong>Warning:</strong> The above code chunk cached its results, but it won't be re-run if previous chunks it depends on are updated. If you need to use caching, it is highly recommended to also set <code>knitr::opts_chunk\)set(autodep = TRUE) at the top of the file (in a chunk that is not cached). Alternatively, you can customize the option dependson for each individual chunk that is cached. Using either autodep or dependson will remove this warning. See the knitr cache options for more details.

Fig. S2

Fig. S3

Fig. S4

Fig. S5

Fig. S6

heatmap is pending a few changes! just not my focus today.

Fig. S7

Fig. S8

Fig. S9

Fig. S11

Fig. S12

<environment: R_GlobalEnv>

R version 4.2.2 (2022-10-31 ucrt)
Platform: x86_64-w64-mingw32/x64 (64-bit)
Running under: Windows 10 x64 (build 19045)

Matrix products: default

locale:
[1] LC_COLLATE=English_United States.utf8 
[2] LC_CTYPE=English_United States.utf8   
[3] LC_MONETARY=English_United States.utf8
[4] LC_NUMERIC=C                          
[5] LC_TIME=English_United States.utf8    

attached base packages:
[1] grid      stats     graphics  grDevices utils     datasets  methods  
[8] base     

other attached packages:
 [1] edgeR_3.38.4          limma_3.52.4          cowplot_1.1.1        
 [4] gridExtra_2.3         ComplexHeatmap_2.12.1 kableExtra_1.3.4     
 [7] RColorBrewer_1.1-3    ggsignif_0.6.4        zoo_1.8-12           
[10] rstatix_0.7.2         ggpubr_0.6.0          lubridate_1.9.2      
[13] forcats_1.0.0         stringr_1.5.0         dplyr_1.1.2          
[16] purrr_1.0.1           readr_2.1.4           tidyr_1.3.0          
[19] tibble_3.2.1          ggplot2_3.4.2         tidyverse_2.0.0      
[22] workflowr_1.7.0      

loaded via a namespace (and not attached):
 [1] matrixStats_1.0.0   fs_1.6.2            doParallel_1.0.17  
 [4] webshot_0.5.4       httr_1.4.6          rprojroot_2.0.3    
 [7] tools_4.2.2         backports_1.4.1     bslib_0.5.0        
[10] utf8_1.2.3          R6_2.5.1            BiocGenerics_0.42.0
[13] colorspace_2.1-0    GetoptLong_1.0.5    withr_2.5.0        
[16] tidyselect_1.2.0    processx_3.8.1      compiler_4.2.2     
[19] git2r_0.32.0        cli_3.6.1           rvest_1.0.3        
[22] xml2_1.3.4          labeling_0.4.2      sass_0.4.6         
[25] scales_1.2.1        callr_3.7.3         systemfonts_1.0.4  
[28] digest_0.6.31       rmarkdown_2.22      svglite_2.1.1      
[31] pkgconfig_2.0.3     htmltools_0.5.5     highr_0.10         
[34] fastmap_1.1.1       rlang_1.1.1         GlobalOptions_0.1.2
[37] rstudioapi_0.14     farver_2.1.1        shape_1.4.6        
[40] jquerylib_0.1.4     generics_0.1.3      jsonlite_1.8.5     
[43] car_3.1-2           magrittr_2.0.3      Rcpp_1.0.10        
[46] munsell_0.5.0       S4Vectors_0.34.0    fansi_1.0.4        
[49] abind_1.4-5         lifecycle_1.0.3     stringi_1.7.12     
[52] whisker_0.4.1       yaml_2.3.7          carData_3.0-5      
[55] parallel_4.2.2      promises_1.2.0.1    crayon_1.5.2       
[58] lattice_0.21-8      circlize_0.4.15     hms_1.1.3          
[61] locfit_1.5-9.8      knitr_1.43          ps_1.7.5           
[64] pillar_1.9.0        rjson_0.2.21        stats4_4.2.2       
[67] codetools_0.2-19    glue_1.6.2          evaluate_0.21      
[70] getPass_0.2-2       data.table_1.14.8   vctrs_0.6.3        
[73] png_0.1-8           tzdb_0.4.0          httpuv_1.6.11      
[76] foreach_1.5.2       gtable_0.3.3        clue_0.3-64        
[79] cachem_1.0.8        xfun_0.39           broom_1.0.5        
[82] later_1.3.1         viridisLite_0.4.2   iterators_1.0.14   
[85] IRanges_2.30.1      cluster_2.1.4       timechange_0.2.0