//! When serializing or deserializing JSON goes wrong.

use std::error;
use std::fmt::{self, Debug, Display};
use std::io;
use std::result;

use serde::de;
use serde::ser;

/// This type represents all possible errors that can occur when serializing or
/// deserializing JSON data.
pub struct Error {
    /// This `Box` allows us to keep the size of `Error` as small as possible. A
    /// larger `Error` type was substantially slower due to all the functions
    /// that pass around `Result<T, Error>`.
    err: Box<ErrorImpl>,
}

/// Alias for a `Result` with the error type `serde_json::Error`.
pub type Result<T> = result::Result<T, Error>;

impl Error {
    /// One-based line number at which the error was detected.
    ///
    /// Characters in the first line of the input (before the first newline
    /// character) are in line 1.
    pub fn line(&self) -> usize {
        self.err.line
    }

    /// One-based column number at which the error was detected.
    ///
    /// The first character in the input and any characters immediately
    /// following a newline character are in column 1.
    ///
    /// Note that errors may occur in column 0, for example if a read from an IO
    /// stream fails immediately following a previously read newline character.
    pub fn column(&self) -> usize {
        self.err.column
    }

    /// Categorizes the cause of this error.
    ///
    /// - `Category::Io` - failure to read or write bytes on an IO stream
    /// - `Category::Syntax` - input that is not syntactically valid JSON
    /// - `Category::Data` - input data that is semantically incorrect
    /// - `Category::Eof` - unexpected end of the input data
    pub fn classify(&self) -> Category {
        match self.err.code {
            ErrorCode::Message(_) => Category::Data,
            ErrorCode::Io(_) => Category::Io,
            ErrorCode::EofWhileParsingList |
            ErrorCode::EofWhileParsingObject |
            ErrorCode::EofWhileParsingString |
            ErrorCode::EofWhileParsingValue => Category::Eof,
            ErrorCode::ExpectedColon |
            ErrorCode::ExpectedListCommaOrEnd |
            ErrorCode::ExpectedObjectCommaOrEnd |
            ErrorCode::ExpectedSomeIdent |
            ErrorCode::ExpectedSomeValue |
            ErrorCode::ExpectedSomeString |
            ErrorCode::InvalidEscape |
            ErrorCode::InvalidNumber |
            ErrorCode::NumberOutOfRange |
            ErrorCode::InvalidUnicodeCodePoint |
            ErrorCode::KeyMustBeAString |
            ErrorCode::LoneLeadingSurrogateInHexEscape |
            ErrorCode::TrailingCharacters |
            ErrorCode::UnexpectedEndOfHexEscape |
            ErrorCode::RecursionLimitExceeded => Category::Syntax,
        }
    }

    /// Returns true if this error was caused by a failure to read or write
    /// bytes on an IO stream.
    pub fn is_io(&self) -> bool {
        self.classify() == Category::Io
    }

    /// Returns true if this error was caused by input that was not
    /// syntactically valid JSON.
    pub fn is_syntax(&self) -> bool {
        self.classify() == Category::Syntax
    }

    /// Returns true if this error was caused by input data that was
    /// semantically incorrect.
    ///
    /// For example, JSON containing a number is semantically incorrect when the
    /// type being deserialized into holds a String.
    pub fn is_data(&self) -> bool {
        self.classify() == Category::Data
    }

    /// Returns true if this error was caused by prematurely reaching the end of
    /// the input data.
    ///
    /// Callers that process streaming input may be interested in retrying the
    /// deserialization once more data is available.
    pub fn is_eof(&self) -> bool {
        self.classify() == Category::Eof
    }
}

/// Categorizes the cause of a `serde_json::Error`.
#[derive(Copy, Clone, PartialEq, Eq, Debug)]
pub enum Category {
    /// The error was caused by a failure to read or write bytes on an IO
    /// stream.
    Io,

    /// The error was caused by input that was not syntactically valid JSON.
    Syntax,

    /// The error was caused by input data that was semantically incorrect.
    ///
    /// For example, JSON containing a number is semantically incorrect when the
    /// type being deserialized into holds a String.
    Data,

    /// The error was caused by prematurely reaching the end of the input data.
    ///
    /// Callers that process streaming input may be interested in retrying the
    /// deserialization once more data is available.
    Eof,
}

#[derive(Debug)]
struct ErrorImpl {
    code: ErrorCode,
    line: usize,
    column: usize,
}

// Not public API. Should be pub(crate).
#[doc(hidden)]
#[derive(Debug)]
pub enum ErrorCode {
    /// Catchall for syntax error messages
    Message(String),

    /// Some IO error occurred while serializing or deserializing.
    Io(io::Error),

    /// EOF while parsing a list.
    EofWhileParsingList,

    /// EOF while parsing an object.
    EofWhileParsingObject,

    /// EOF while parsing a string.
    EofWhileParsingString,

    /// EOF while parsing a JSON value.
    EofWhileParsingValue,

    /// Expected this character to be a `':'`.
    ExpectedColon,

    /// Expected this character to be either a `','` or a `]`.
    ExpectedListCommaOrEnd,

    /// Expected this character to be either a `','` or a `}`.
    ExpectedObjectCommaOrEnd,

    /// Expected to parse either a `true`, `false`, or a `null`.
    ExpectedSomeIdent,

    /// Expected this character to start a JSON value.
    ExpectedSomeValue,

    /// Expected this character to start a JSON string.
    ExpectedSomeString,

    /// Invalid hex escape code.
    InvalidEscape,

    /// Invalid number.
    InvalidNumber,

    /// Number is bigger than the maximum value of its type.
    NumberOutOfRange,

    /// Invalid unicode code point.
    InvalidUnicodeCodePoint,

    /// Object key is not a string.
    KeyMustBeAString,

    /// Lone leading surrogate in hex escape.
    LoneLeadingSurrogateInHexEscape,

    /// JSON has non-whitespace trailing characters after the value.
    TrailingCharacters,

    /// Unexpected end of hex excape.
    UnexpectedEndOfHexEscape,

    /// Encountered nesting of JSON maps and arrays more than 128 layers deep.
    RecursionLimitExceeded,
}

impl Error {
    // Not public API. Should be pub(crate).
    #[doc(hidden)]
    pub fn syntax(code: ErrorCode, line: usize, column: usize) -> Self {
        Error {
            err: Box::new(ErrorImpl { code: code, line: line, column: column }),
        }
    }

    // Not public API. Should be pub(crate).
    #[doc(hidden)]
    pub fn fix_position<F>(self, f: F) -> Self
        where F: FnOnce(ErrorCode) -> Error
    {
        if self.err.line == 0 {
            f(self.err.code)
        } else {
            self
        }
    }
}

impl Display for ErrorCode {
    fn fmt(&self, f: &mut fmt::Formatter) -> fmt::Result {
        match *self {
            ErrorCode::Message(ref msg) => f.write_str(msg),
            ErrorCode::Io(ref err) => Display::fmt(err, f),
            ErrorCode::EofWhileParsingList => {
                f.write_str("EOF while parsing a list")
            }
            ErrorCode::EofWhileParsingObject => {
                f.write_str("EOF while parsing an object")
            }
            ErrorCode::EofWhileParsingString => {
                f.write_str("EOF while parsing a string")
            }
            ErrorCode::EofWhileParsingValue => {
                f.write_str("EOF while parsing a value")
            }
            ErrorCode::ExpectedColon => {
                f.write_str("expected `:`")
            }
            ErrorCode::ExpectedListCommaOrEnd => {
                f.write_str("expected `,` or `]`")
            }
            ErrorCode::ExpectedObjectCommaOrEnd => {
                f.write_str("expected `,` or `}`")
            }
            ErrorCode::ExpectedSomeIdent => {
                f.write_str("expected ident")
            }
            ErrorCode::ExpectedSomeValue => {
                f.write_str("expected value")
            }
            ErrorCode::ExpectedSomeString => {
                f.write_str("expected string")
            }
            ErrorCode::InvalidEscape => {
                f.write_str("invalid escape")
            }
            ErrorCode::InvalidNumber => {
                f.write_str("invalid number")
            }
            ErrorCode::NumberOutOfRange => {
                f.write_str("number out of range")
            }
            ErrorCode::InvalidUnicodeCodePoint => {
                f.write_str("invalid unicode code point")
            }
            ErrorCode::KeyMustBeAString => {
                f.write_str("key must be a string")
            }
            ErrorCode::LoneLeadingSurrogateInHexEscape => {
                f.write_str("lone leading surrogate in hex escape")
            }
            ErrorCode::TrailingCharacters => {
                f.write_str("trailing characters")
            }
            ErrorCode::UnexpectedEndOfHexEscape => {
                f.write_str("unexpected end of hex escape")
            }
            ErrorCode::RecursionLimitExceeded => {
                f.write_str("recursion limit exceeded")
            }
        }
    }
}

impl error::Error for Error {
    fn description(&self) -> &str {
        match self.err.code {
            ErrorCode::Io(ref err) => error::Error::description(err),
            _ => {
                // If you want a better message, use Display::fmt or to_string().
                "JSON error"
            }
        }
    }

    fn cause(&self) -> Option<&error::Error> {
        match self.err.code {
            ErrorCode::Io(ref err) => Some(err),
            _ => None,
        }
    }
}

impl Display for Error {
    fn fmt(&self, f: &mut fmt::Formatter) -> fmt::Result {
        Display::fmt(&*self.err, f)
    }
}

impl Display for ErrorImpl {
    fn fmt(&self, f: &mut fmt::Formatter) -> fmt::Result {
        if self.line == 0 {
            Display::fmt(&self.code, f)
        } else {
            write!(f, "{} at line {} column {}", self.code, self.line, self.column)
        }
    }
}

// Remove two layers of verbosity from the debug representation. Humans often
// end up seeing this representation because it is what unwrap() shows.
impl Debug for Error {
    fn fmt(&self, f: &mut fmt::Formatter) -> fmt::Result {
        Debug::fmt(&*self.err, f)
    }
}

impl From<ErrorImpl> for Error {
    fn from(error: ErrorImpl)  -> Error {
        Error {
            err: Box::new(error),
        }
    }
}

impl From<io::Error> for Error {
    fn from(error: io::Error) -> Error {
        Error {
            err: Box::new(ErrorImpl { code: ErrorCode::Io(error), line: 0, column: 0 }),
        }
    }
}

impl From<de::value::Error> for Error {
    fn from(error: de::value::Error) -> Error {
        Error {
            err: Box::new(ErrorImpl { code: ErrorCode::Message(error.to_string()), line: 0, column: 0 }),
        }
    }
}

impl de::Error for Error {
    fn custom<T: Display>(msg: T) -> Error {
        Error {
            err: Box::new(ErrorImpl { code: ErrorCode::Message(msg.to_string()), line: 0, column: 0 }),
        }
    }
}

impl ser::Error for Error {
    fn custom<T: Display>(msg: T) -> Error {
        Error {
            err: Box::new(ErrorImpl { code: ErrorCode::Message(msg.to_string()), line: 0, column: 0 }),
        }
    }
}