Pre-requisites

You need to know what a univariate normal distribution is, and basic properties such as the fact that linear combinations of normals are also normal. You also need to know the basics of matrix algebra (e.g. matrix multiplication, matrix transpose).

Definition

There are several equivalent ways to define a multivariate normal, but perhaps the most succinct and elegant is this one, which I took from Wikipedia: “a random vector is said to be \(r\)-variate normally distributed if every linear combination of its \(r\) components has a univariate normal distribution”. The special case \(r=2\) is usually referred to as the “bivariate normal” distribution. And the terminology “\(r\)-dimensional multivariate normal” means the same as \(r\)-variate normal.

Perhaps more insight can be obtained by specifying one way to simulate from a multivariate normal distribution. Suppose \(Z_1,\dots,Z_n\) are independent random variables each with a standard normal distribution \(N(0,1)\). Let \(Z\) denote the vector \((Z_1,\dots,Z_n)\), and let \(A\) be any \(r \times n\) matrix, and \(\mu\) be any \(r\)-vector. Then the vector \(X = AZ+\mu\) has an \(r\)-dimensional multivariate normal distribution with mean \(\mu\) and variance-covariance matrix \(\Sigma:=AA'\). (Here \(A'\) means the transpose of the matrix \(A\).) We write \(X \sim N_r(\mu,\Sigma)\).

Note that \(E(X_j)=\mu_j\) and \(cov(X_i,X_j)= \Sigma_{ij}\).

When we simulate \(X\) this way, any linear combination of the elements of \(X\) is a linear combination of \(Z\), and so is univariate normal because any linear combination of univariate normals is univariate normal. That is, when we simulate \(X\) this way it satisfies the definition above for being \(r\)-variate normal.

Example

Suppose we define \(X_1 = Z_1 + Z_2\) and \(X_2 = Z_1 + Z_3\) where \(Z_1,Z_2\) and \(Z_3\) are independent standard normal variables. Then \(X = AZ\) where \(A = \begin{pmatrix} 1 & 1 & 0 \\ 1 & 0 & 1 \end{pmatrix}\), and so \(X \sim N_2 (0,\Sigma)\) where \(\Sigma = AA' = \begin{pmatrix} 2 & 1 \\ 1 & 2 \end{pmatrix}\).

Here is some code to simulate from this distribution:

Z = rnorm(3)
A = rbind(c(1,1,0),c(1,0,1))
print(A %*% t(A)) # show Sigma

     [,1] [,2]
[1,]    2    1
[2,]    1    2

X = A %*% Z

And if we want to simulate lots of examples, we can do this lots of times. The following code simulates from this distribution 1000 times and plots the points.

X = matrix(0,nrow=2,ncol=1000)
A = rbind(c(1,1,0),c(1,0,1))
for(i in 1:1000){
  Z = rnorm(3)
  X[,i] = A %*% Z
}
plot(X[1,],X[2,],main="bivariate normal with variance 2, covariance 1",asp=1,xlim=c(-5,5),ylim=c(-5,5))

And we can check the sample covariances are close to the theoretical values:

cov(t(X))

         [,1]     [,2]
[1,] 2.086116 1.061132
[2,] 1.061132 2.055422

General algorithm

From the above we can see that you can simulate from a multivariate normal with any mean \(\mu\) and variance covariance matrix \(\Sigma\) provided that \(\Sigma\) can be written as \(\Sigma = AA'\) for some matrix \(A\). This turns out to be possible if and only if \(\Sigma\) is what is known “Positive semi-definite” matrix - that is a symmetric matrix with non-negative eigenvalues.

Given a positive semi-definite matrix \(\Sigma\) there are multiple ways to find a matrix \(A\) such that \(\Sigma=AA'\) (and indeed multiple matrices \(A\) that obey this). However, for our purposes here we only need one way, and here we use the “Cholesky decomposition”, which finds a unique lower triangular matrix \(L\) such that \(LL' \Sigma\). Here’s an illustration of the Cholesky decomposition (the R function chol() finds an upper triangular matrix, so we transpose it here to make it lower triangular).

Sigma = rbind(c(2,1),c(1,2))
L = t(chol(Sigma))
L

          [,1]     [,2]
[1,] 1.4142136 0.000000
[2,] 0.7071068 1.224745

L %*% t(L)

     [,1] [,2]
[1,]    2    1
[2,]    1    2

We can use this to generate a multivariate normal. Here we use it to generate a bivariate normal with covariance matrix \[\begin{pmatrix} 1.0 & 0.9 \\ 0.9 & 1.0 \end{pmatrix}\]

my_rmvnorm=function(mu,Sigma){
  r = length(mu)
  L = t(chol(Sigma)) 
  Z = rnorm(r)
  return(L %*% Z + mu)
}

X = matrix(0,nrow=2,ncol=1000)
for(i in 1:1000){
  X[,i] = my_rmvnorm(c(0,0),rbind(c(1.0, 0.9),c(0.9,1.0)))
}
plot(X[1,],X[2,],main="bivariate normal with variance 1, covariance 0.9",asp=1)

NOTE: If you want to actually generate multivariate normal random variables in R you should use a more carefully-written function like ‘’mvtnorm::rmvnorm’’.

sessionInfo()

R version 3.3.0 (2016-05-03)
Platform: x86_64-apple-darwin13.4.0 (64-bit)
Running under: OS X 10.10.5 (Yosemite)

locale:
[1] en_NZ.UTF-8/en_NZ.UTF-8/en_NZ.UTF-8/C/en_NZ.UTF-8/en_NZ.UTF-8

attached base packages:
[1] stats     graphics  grDevices utils     datasets  methods   base     

other attached packages:
 [1] tidyr_0.4.1     dplyr_0.5.0     ggplot2_2.1.0   knitr_1.15.1   
 [5] MASS_7.3-45     expm_0.999-0    Matrix_1.2-6    viridis_0.3.4  
 [9] workflowr_0.3.0 rmarkdown_1.3  

loaded via a namespace (and not attached):
 [1] Rcpp_0.12.5      git2r_0.18.0     plyr_1.8.4       tools_3.3.0     
 [5] digest_0.6.9     evaluate_0.10    tibble_1.1       gtable_0.2.0    
 [9] lattice_0.20-33  shiny_0.13.2     DBI_0.4-1        yaml_2.1.14     
[13] gridExtra_2.2.1  stringr_1.2.0    gtools_3.5.0     rprojroot_1.2   
[17] grid_3.3.0       R6_2.1.2         reshape2_1.4.1   magrittr_1.5    
[21] backports_1.0.5  scales_0.4.0     htmltools_0.3.5  assertthat_0.1  
[25] mime_0.5         colorspace_1.2-6 xtable_1.8-2     httpuv_1.3.3    
[29] labeling_0.3     stringi_1.1.2    munsell_0.4.3