Last updated: 2020-09-25

Checks: 7 0

Knit directory: single-cell-topics/analysis/

This reproducible R Markdown analysis was created with workflowr (version 1.6.2.9000). The Checks tab describes the reproducibility checks that were applied when the results were created. The Past versions tab lists the development history.


Great! Since the R Markdown file has been committed to the Git repository, you know the exact version of the code that produced these results.

Great job! The global environment was empty. Objects defined in the global environment can affect the analysis in your R Markdown file in unknown ways. For reproduciblity it’s best to always run the code in an empty environment.

The command set.seed(1) was run prior to running the code in the R Markdown file. Setting a seed ensures that any results that rely on randomness, e.g. subsampling or permutations, are reproducible.

Great job! Recording the operating system, R version, and package versions is critical for reproducibility.

Nice! There were no cached chunks for this analysis, so you can be confident that you successfully produced the results during this run.

Great job! Using relative paths to the files within your workflowr project makes it easier to run your code on other machines.

Great! You are using Git for version control. Tracking code development and connecting the code version to the results is critical for reproducibility.

The results in this page were generated with repository version 420f865. See the Past versions tab to see a history of the changes made to the R Markdown and HTML files.

Note that you need to be careful to ensure that all relevant files for the analysis have been committed to Git prior to generating the results (you can use wflow_publish or wflow_git_commit). workflowr only checks the R Markdown file, but you know if there are other scripts or data files that it depends on. Below is the status of the Git repository when the results were generated:


Ignored files:
    Ignored:    data/droplet.RData
    Ignored:    data/pbmc_68k.RData
    Ignored:    data/pbmc_purified.RData
    Ignored:    data/pulseseq.RData
    Ignored:    output/droplet/fits-droplet.RData
    Ignored:    output/droplet/rds/
    Ignored:    output/pbmc-68k/fits-pbmc-68k.RData
    Ignored:    output/pbmc-68k/rds/
    Ignored:    output/pbmc-purified/fits-pbmc-purified.RData
    Ignored:    output/pbmc-purified/rds/
    Ignored:    output/pulseseq/fits-pulseseq.RData
    Ignored:    output/pulseseq/rds/

Untracked files:
    Untracked:  analysis/diff-count-droplet.RData
    Untracked:  analysis/plots_tracheal_epithelium_cache/

Note that any generated files, e.g. HTML, png, CSS, etc., are not included in this status report because it is ok for generated content to have uncommitted changes.


These are the previous versions of the repository in which changes were made to the R Markdown (analysis/diff_count_droplet.Rmd) and HTML (docs/diff_count_droplet.html) files. If you’ve configured a remote Git repository (see ?wflow_git_remote), click on the hyperlinks in the table below to view the files as they were in that past version.

File Version Author Date Message
Rmd 420f865 Peter Carbonetto 2020-09-25 workflowr::wflow_publish(“diff_count_droplet.Rmd”)
html 741c00a Peter Carbonetto 2020-09-25 Built page for new analysis diff_count_droplet.
Rmd d2b4bd2 Peter Carbonetto 2020-09-25 workflowr::wflow_publish(“diff_count_droplet.Rmd”)
Rmd a9ae3b4 Peter Carbonetto 2020-09-24 Working on new analysis, diff_count_droplet.Rmd.
html 71300ae Peter Carbonetto 2020-09-24 Added links to overview page.
Rmd ab22824 Peter Carbonetto 2020-09-24 workflowr::wflow_publish(“index.Rmd”)

Here we perform a differential expression analysis using the topic model fit to the droplet data, as well as the clusters identified from this topic model.

Load the packages used in the analysis below.

library(Matrix)
library(dplyr)
library(fastTopics)
library(tools)

Load data and results

Load the droplet data, the \(k = 7\) Poisson NMF model fit, and the clusters identified in the clustering analysis.

load("../data/droplet.RData")
fit <- readRDS("../output/droplet/rds/fit-droplet-scd-ex-k=7.rds")$fit
samples <- readRDS("../output/droplet/clustering-droplet.rds")

Perform differential expression analysis

Perform differential expression analysis using the multinomial topic model.

timing <- system.time(
  diff_count_topics <- diff_count_analysis(fit,counts))
cat(sprintf("Computation took %0.2f seconds.\n",timing["elapsed"]))
# Fitting 18388 x 7 = 128716 univariate Poisson models.
# Computing log-fold change statistics.
# Computation took 21.33 seconds.

Next, calculate differential expression statistics using the clusters that were identified from the topic proportion PCs.

fit_clusters <- init_poisson_nmf_from_clustering(counts,samples$cluster)
timing <- system.time(
  diff_count_clusters <- diff_count_analysis(fit_clusters,counts))
# All topic proportions are either zero or one; using simpler single-topic calculations for model parameter estimates
cat(sprintf("Computation took %0.2f seconds.\n",timing["elapsed"]))
# Fitting 18388 x 8 = 147104 univariate Poisson models.
# Computing log-fold change statistics.
# Computation took 25.17 seconds.

Finally, perform one more differential expression analysis after merging the two club cell topics.

fit_merge_club <- merge_topics(poisson2multinom(fit),c(5,7))
timing <- system.time(
  diff_count_merge_club <- diff_count_analysis(fit_merge_club,counts))
cat(sprintf("Computation took %0.2f seconds.\n",timing["elapsed"]))
# Fitting 18388 x 6 = 110328 univariate Poisson models.
# Computing log-fold change statistics.
# Computation took 16.73 seconds.

Save results

Save the results of the differential expression analyses to an RData file.

save(list = c("diff_count_topics",
              "diff_count_clusters",
              "diff_count_merge_club"),
     file = "diff-count-droplet.RData")
resaveRdaFiles("diff-count-droplet.RData")

sessionInfo()
# R version 3.6.2 (2019-12-12)
# Platform: x86_64-apple-darwin15.6.0 (64-bit)
# Running under: macOS Catalina 10.15.6
# 
# Matrix products: default
# BLAS:   /Library/Frameworks/R.framework/Versions/3.6/Resources/lib/libRblas.0.dylib
# LAPACK: /Library/Frameworks/R.framework/Versions/3.6/Resources/lib/libRlapack.dylib
# 
# locale:
# [1] en_US.UTF-8/en_US.UTF-8/en_US.UTF-8/C/en_US.UTF-8/en_US.UTF-8
# 
# attached base packages:
# [1] tools     stats     graphics  grDevices utils     datasets  methods  
# [8] base     
# 
# other attached packages:
# [1] fastTopics_0.3-177 dplyr_0.8.3        Matrix_1.2-18     
# 
# loaded via a namespace (and not attached):
#  [1] progress_1.2.2       tidyselect_0.2.5     xfun_0.11           
#  [4] purrr_0.3.3          lattice_0.20-38      vctrs_0.2.1         
#  [7] colorspace_1.4-1     viridisLite_0.3.0    htmltools_0.4.0     
# [10] yaml_2.2.0           MCMCpack_1.4-5       plotly_4.9.2        
# [13] rlang_0.4.5          later_1.0.0          pillar_1.4.3        
# [16] glue_1.3.1           lifecycle_0.1.0      stringr_1.4.0       
# [19] MatrixModels_0.4-1   munsell_0.5.0        gtable_0.3.0        
# [22] workflowr_1.6.2.9000 htmlwidgets_1.5.1    coda_0.19-3         
# [25] evaluate_0.14        knitr_1.26           SparseM_1.78        
# [28] httpuv_1.5.2         quantreg_5.54        irlba_2.3.3         
# [31] Rcpp_1.0.5           promises_1.1.0       backports_1.1.5     
# [34] scales_1.1.0         jsonlite_1.6         RcppParallel_4.4.2  
# [37] fs_1.3.1             mcmc_0.9-6           hms_0.5.2           
# [40] ggplot2_3.3.0        digest_0.6.23        stringi_1.4.3       
# [43] Rtsne_0.15           ggrepel_0.9.0        grid_3.6.2          
# [46] rprojroot_1.3-2      cowplot_1.0.0        quadprog_1.5-8      
# [49] magrittr_1.5         lazyeval_0.2.2       tibble_2.1.3        
# [52] zeallot_0.1.0        tidyr_1.0.0          crayon_1.3.4        
# [55] whisker_0.4          pkgconfig_2.0.3      MASS_7.3-51.4       
# [58] prettyunits_1.1.1    data.table_1.12.8    assertthat_0.2.1    
# [61] rmarkdown_2.3        httr_1.4.1           R6_2.4.1            
# [64] git2r_0.26.1         compiler_3.6.2