Last updated: 2021-03-08

Checks: 7 0

Knit directory: FACE-IT/

This reproducible R Markdown analysis was created with workflowr (version 1.6.2). The Checks tab describes the reproducibility checks that were applied when the results were created. The Past versions tab lists the development history.


Great! Since the R Markdown file has been committed to the Git repository, you know the exact version of the code that produced these results.

Great job! The global environment was empty. Objects defined in the global environment can affect the analysis in your R Markdown file in unknown ways. For reproduciblity it’s best to always run the code in an empty environment.

The command set.seed(20210216) was run prior to running the code in the R Markdown file. Setting a seed ensures that any results that rely on randomness, e.g. subsampling or permutations, are reproducible.

Great job! Recording the operating system, R version, and package versions is critical for reproducibility.

Nice! There were no cached chunks for this analysis, so you can be confident that you successfully produced the results during this run.

Great job! Using relative paths to the files within your workflowr project makes it easier to run your code on other machines.

Great! You are using Git for version control. Tracking code development and connecting the code version to the results is critical for reproducibility.

The results in this page were generated with repository version d4b695c. See the Past versions tab to see a history of the changes made to the R Markdown and HTML files.

Note that you need to be careful to ensure that all relevant files for the analysis have been committed to Git prior to generating the results (you can use wflow_publish or wflow_git_commit). workflowr only checks the R Markdown file, but you know if there are other scripts or data files that it depends on. Below is the status of the Git repository when the results were generated:


Ignored files:
    Ignored:    .Rhistory
    Ignored:    .Rproj.user/

Unstaged changes:
    Modified:   analysis/FACE-IT.bib

Note that any generated files, e.g. HTML, png, CSS, etc., are not included in this status report because it is ok for generated content to have uncommitted changes.


These are the previous versions of the repository in which changes were made to the R Markdown (analysis/metadatabase.Rmd) and HTML (docs/metadatabase.html) files. If you’ve configured a remote Git repository (see ?wflow_git_remote), click on the hyperlinks in the table below to view the files as they were in that past version.

File Version Author Date Message
Rmd d4b695c robwschlegel 2021-03-08 Re-built site.
Rmd dc5dbf5 robwschlegel 2021-03-04 Formatted all of the tables
html dc5dbf5 robwschlegel 2021-03-04 Formatted all of the tables
Rmd 4a20757 robwschlegel 2021-03-04 Added FACE-IT logo to top of each page
html 4a20757 robwschlegel 2021-03-04 Added FACE-IT logo to top of each page
Rmd ddbd10d robwschlegel 2021-03-04 Experimenting with popup rendering
html ddbd10d robwschlegel 2021-03-04 Experimenting with popup rendering
Rmd c2e7863 robwschlegel 2021-03-04 More HTML testing
html c2e7863 robwschlegel 2021-03-04 More HTML testing
Rmd 49ebabd robwschlegel 2021-03-04 Testing pop-ups and hyperlinks
html 49ebabd robwschlegel 2021-03-04 Testing pop-ups and hyperlinks
Rmd c44e66f robwschlegel 2021-03-03 Added a bit of text
html c44e66f robwschlegel 2021-03-03 Added a bit of text
html 75d8f9b robwschlegel 2021-03-02 Build site.
Rmd f1c0ac2 robwschlegel 2021-03-02 More spacing
html f1c0ac2 robwschlegel 2021-03-02 More spacing
html 1765abd robwschlegel 2021-03-02 Build site.
Rmd 782169d robwschlegel 2021-03-02 More playing around with widths and margins
html 782169d robwschlegel 2021-03-02 More playing around with widths and margins
html 86624e0 robwschlegel 2021-03-02 Build site.
Rmd f853627 robwschlegel 2021-03-02 Playing with page and table margins.
html 8b80769 robwschlegel 2021-03-02 Build site.
Rmd 37be6e6 robwschlegel 2021-03-02 Re-built site.
Rmd a89dfa3 robwschlegel 2021-03-02 Moving away from a single smart meta-data functions towards more user input
html fbef3e0 robwschlegel 2021-03-01 Build site.
Rmd e020300 robwschlegel 2021-03-01 Re-built site.
html e8aab70 robwschlegel 2021-03-01 Build site.
Rmd f8ad72b robwschlegel 2021-03-01 Re-built site.
Rmd 665719d robwschlegel 2021-03-01 Scraping convoluted date meta-data logic chain
Rmd 21aed26 robwschlegel 2021-03-01 Playing with meta-data function
html 6c2110f robwschlegel 2021-03-01 Build site.
Rmd 5d4b15e robwschlegel 2021-03-01 Re-built site.
html 3a30630 robwschlegel 2021-03-01 Build site.
Rmd 9d46384 robwschlegel 2021-03-01 Re-built site.
html 3fd74f7 robwschlegel 2021-03-01 Build site.
Rmd 7d2db83 robwschlegel 2021-03-01 Re-built site.
Rmd 7ff8d63 robwschlegel 2021-03-01 More work on metadatabase
html 7ff8d63 robwschlegel 2021-03-01 More work on metadatabase
html 6b2f047 robwschlegel 2021-02-24 Build site.
Rmd 3e8114e robwschlegel 2021-02-24 Re-built site.
Rmd c38a8d3 robwschlegel 2021-02-19 More minor changes
html 9f9385e robwschlegel 2021-02-19 Build site.
Rmd 93d152e robwschlegel 2021-02-19 Adjusting file pathways
html 6208900 robwschlegel 2021-02-19 Build site.
Rmd b09fb3f robwschlegel 2021-02-19 Re-built site.
html 51741d5 robwschlegel 2021-02-19 Build site.
Rmd ca063d3 robwschlegel 2021-02-19 Re-built site.
html 849da96 robwschlegel 2021-02-19 Build site.
Rmd c5e635e robwschlegel 2021-02-19 Re-built site.
html ee3511e robwschlegel 2021-02-18 Build site.
html 04d996a robwschlegel 2021-02-18 Build site.
html c3a8a72 robwschlegel 2021-02-18 Build site.
html 3992686 robwschlegel 2021-02-18 Build site.
Rmd f9244d5 Robert 2021-02-17 Re-built site.
Rmd bd0919b robwschlegel 2021-02-16 The metadatabase Rmd file

Introduction

This document is designed to satisfy D1.1 and eventually D1.2 for the Horizon2020 project FACE-IT. The text and static tables in this document are a report on the key drivers of change in Arctic fjord biodiversity (D1.1). The interactive tables contain the meta-database for the data identified as key drivers of change (D1.2). The text and meta-data from this document will be used for the completion of a review article on past and future changes of key drivers in and around the FACE-IT study sites (D1.3). This document begins with a review of known drivers of change in the European Arctic before focussing in on each individual FACE-IT study site to discuss any differences from the broader Arctic. Each of the following sections for each region/study site contain tables that show a summary of their key drivers and meta-data. There is no central table for all of the drivers or meta-data.

European Arctic

Many physical processes are known to drive biodiversity in the Arctic. Unsurprisingly, the presence of sea ice is one of these controlling factors (Pavlova et al., 2019). The cryosphere, of which sea ice is a part, is one of the defining characteristics of the Arctic that sets it apart from neighbouring climatic regions (e.g. boreal and cold temperate). It is therefore safe to assume that changes to the Arctic cryosphere will lead to fundamental changes in the biodiversity found there. The cryosphere itself however is not the primary driver of change in the Arctic. This is because changes in the cryosphere are themselves being driven by the primary driver of climatic change that defines the anthropocene: increases in CO2 emissions that are primarily responsible for global increases in temperature. It is this relatively rapid increase in temperature that is having a profound effect on the Arctic cryosphere (Meredith et al., 2019). Therefore, as with almost any study of biodiversity, high-quality spatiotemporally complete temperature data are crucial. The longer the complete time series the better.

There are however many more important variables to consider, such as photosynthetically available radiation (PAR), ultraviolet radiation (UVR), and turbidity (Hop and Wiencke, 2019). Many of these important drivers are known from research conducted further south. Where datasets are easier to build, and time series are longer. For this reason one may find that the drivers of change in Arctic are more often inferred than they are ‘known.’ This is because historically there has been a paucity of data in the Arctic (Bischof et al., 2019b). Many international projects, in coordination with many established Arctic research institutions, have been very busy to close this knowledge gap and the holes in our knowledge are being filled rapidly. FACE-IT is one of these projects that seeks to better understand biodiversity changes, while contributing to and drawing from this expanding body of knowledge.

In addition to knowing what it is that may cause changes, it is necessary to identify the fonts of biodiversity that may be affected by these drivers. There are many taxa/species etc. that have been identified as important for monitoring throughout the Arctic. Foremost of these are the kelps, brown macroalgae that often function as ecosystem engineers along the cool temperate coastlines of the world or cooler (Bischof et al., 2019a). The prevailing hypothesis is that as the Arctic warms, the retreating coastal sea ice and increased temperatures will be more hospitable to kelp forests, and everything that comes with them. But there’s a catch. As temperatures warm, glaciers melt more rapidly, releasing more runoff into coastal zones that increases turbidity (Bischof et al., 2019a). This means that benthic organisms, like kelps, will not receive the levels of PAR that they would like, potentially inhibiting their growth. One benefit of this is that the kelps are exposed to lower levels of UVR, which may help them to some extent. More research and longer time series are required to say conclusively how this situation will play out. It will also differ between sites and so this issue is addressed again below where appropriate.

Consider that even if global temperature rise is limited to 2°C, this will mean a +4°C increase in the Arctic (Overland et al., 2019). Land ice melt is also projected to continue regardless of emission reductions due to internal lags, meaning that continued sea level rise throughout the century is a certainty. One must also keep in mind that the disproportionately larger surface heat fluxes into the Arctic may inhibit the stabilisation of the global climate even if an effective emissions reduction strategy is implemented (Overland et al., 2019).

NB: This is one option for how to show tabular information. I’ve put the tables behind these buttons so that only one is shown at a time. Lower down in this document all tables are shown together. I’m curious to know what people prefer.

Tables

Drivers
Category Driver Why Reference
Cryosphere Sea-ice
Physical Air temp.
Physical SST
Meta-data

Svalbard

While not a study site itself, there are a lot of studies and data products that focus on Svalbard broadly, rather than individual study sites within this region. Therefore this geographical region has it’s own meta-data table. The primary drivers of change for each site are still listed in their own tables.

Category Driver Why Reference

Kongsfjorden

Much of the solar magnetic radiation going towards earth is focussed around Ny Alesund. This can have a knock on effect to air temperature when there are strong auroras: up to 4°C! Unfortunately models currently capture this effect very poorly.

Land terminating glaciers around Kongsfjorden have been retreating linearly over the last decades. Water terminating glaciers retreat less linearly as there are occasions when the water terminating edge may surge forward, making it look like the terminating edge has improved. This is generally due to a destabilisation of the glacier that means an overall decrease in the glacier mass balance. 2020 was a record breaking warm year that has led to record breaking melts. Smaller glaciers are more susceptible to the increase in melt driven by climate change as they have smaller areas to accumulate ice etc. during the cold period of the year.

Up until 2007 the fjord tended to be frozen 100% until February (Pavlova et al., 2019). Since 2007 the fjord has been having less and less surface freezing. This is in part due to Atlantic water encroachment. These waters are higher in aragonite and pH. These are also less turbid, allowing for more light for use with plankton etc. The plankton do respond to this with Atlantic species favoured in warmer years.

As to the influence of light, this has been increasing both due to increased melt and less ice cover throughout the year, in addition to increases in tourism. Besides increases in light pollution, longer times and broader areas of exposed sea surface also allows for a greater accumulation of positive downward heat flux. Of the four heat flux terms, it appears that increases in long wave radiation (Q_lw) over time are the leading cause of change to the cryosphere (Bischof et al. (2019b)). Following this, short wave radiation (Q_sw) is also increasing at a worrying rate, due in part to a decrease in cloud cover over the summer months (Bischof et al., 2019b).

Because the higher trophic levels of Arctic ecosystems, including Kongsfjorden, are dominated by migratory species, such as sea birds, these will be less exposed to the build-up of contaminants in a given area. Such as those sources identified on Svalbard and around the Kongsfjorden area (Granberg et al., 2017). However, lower trophic level populations have shown the capacity to adapt rapidly enough to changes in local contamination that they are still able to carry contaminants up the food web (Bischof et al., 2019b).

A large priority area of Kongsfjorden research moving forward must be the processes of exchange between the neighbouring fjords of Kongsfjorden and the Atlantic ocean (Bischof et al., 2019b). Progressing from this regional analysis, the work being done in the other areas of western Svalbard should be upscaled so as to provide the basis across which modelling work could connect these areas into a single integrated region. The understanding of the effects of physical drivers on ecosystems, with a focus on primary and secondary producers, is a particularly important area of focus (Bischof et al., 2019b). Ultimately, one of the main goals of identifying these drivers is to better enhanced the predictive capabilities of science in the region.

A study conducted in situ compared biomass records from 2012-2014 against those from 1996-1998 and found that biomass had increased by 8.2 fold at the shallower depth of 2.5 m (Bartsch et al., 2016). These findings are similar to other macroalgae research throughout the Arctic that show a general increase in biomass accompanied by a shift to shallower depths. The physical processes that explain these observations are that increasing coastal sea-ice leads to less ice scour at these shallow depths, while less PAR is penetrating to the deeper range of macroalgae (Bartsch et al., 2016).

The distribution, abundance, and species composition of pelagic macro zooplankton are very sensitive to oceanic changes. It was found that the warming occurring in the Kongsfjorden ecosystem is having a dramatic positive effect on the abundance of euphausiids and amphipods (Dalpadado et al., 2016). This is of particular importance as these are key prey species for target fishery species such as capelin and polar cod.

Category Driver Why Reference
Cryosphere Sea-ice cover Affects pelagic and benthic production. Bischof et al. (2019a)
cryosphere Land glacier mass balance An indicator of the change to other drivers Pavlova et al. (2019)
Cryoshpere Runoff Alters salinity, nutrients, and turbidity of surface waters. Bischof et al. (2019a)
Physical Longwave radiation (Q_lw) Primary driver of warming waters. Bischof et al. (2019b)
Physical Shortwave radiation (Q_sw) Secondary driver of warming waters. Bischof et al. (2019b)
Physical Turbidity Prevents light to benthic producers. Bischof et al. (2019a)
Physical Circulation Allows for more encroachment of Atlantic waters. Hop and Wiencke (2019)
Chemistry Acidification Affects pelagic primary production. Hop and Wiencke (2019)
Biological Benthic macroalgal biomass/production Changes where coastal ecosystems will be found and at what scale. Bartsch et al. (2016)
Biological Macro zooplankton Top down pressure on phytoplankton and a source of food higher up. Dalpadado et al. (2016)
Social Ship traffic Indicative of direct anthropogenic disturbance.

Isfjorden

Category Driver Why Reference
Social Fish landings Alters top down trophic pressure.
Social Tourism arrivals Increases to a range of pollutants from light to chemical.

NB: This is just a place holder until Isfjorden data are added.

Inglefieldbukta

Greenland

See the EU Arctic figure above for where the Greenland sites are located. They are too spread out to be shown here in a single figure with any better precision than the full study area.

Young Sound

Disko Bay

Nuup Kangerlua

Norway

Porsangerfjorden

References

Bartsch, I., Paar, M., Fredriksen, S., Schwanitz, M., Daniel, C., Hop, H., et al. (2016). Changes in kelp forest biomass and depth distribution in kongsfjorden, svalbard, between 1996–1998 and 2012–2014 reflect arctic warming. Polar Biology 39, 2021–2036.
Bischof, K., Buschbaum, C., Fredriksen, S., Gordillo, F. J., Heinrich, S., Jiménez, C., et al. (2019a). “Kelps and environmental changes in kongsfjorden: Stress perception and responses,” in The ecosystem of kongsfjorden, svalbard (Springer), 373–422.
Bischof, K., Convey, P., Duarte, P., Gattuso, J.-P., Granberg, M., Hop, H., et al. (2019b). “Kongsfjorden as harbinger of the future arctic: Knowns, unknowns and research priorities,” in The ecosystem of kongsfjorden, svalbard (Springer), 537–562.
Dalpadado, P., Hop, H., Rønning, J., Pavlov, V., Sperfeld, E., Buchholz, F., et al. (2016). Distribution and abundance of euphausiids and pelagic amphipods in kongsfjorden, isfjorden and rijpfjorden (svalbard) and changes in their relative importance as key prey in a warming marine ecosystem. Polar Biology 39, 1765–1784.
Granberg, M. E., Ask, A., and Gabrielsen, G. W. (2017). Local contamination in svalbard. Overview and suggestions for remediation actions. Norsk Polarinstitutt.[S. l.].
Hop, H., and Wiencke, C. (2019). “The ecosystem of kongsfjorden, svalbard,” in The ecosystem of kongsfjorden, svalbard, eds. H. Hop and C. Wiencke (Cham: Springer International Publishing), 1–20. doi:10.1007/978-3-319-46425-1_1.
Meredith, M., Sommerkorn, M., Cassotta, S., Derksen, C., Ekaykin, A., Hollowed, A., et al. (2019). Polar regions. Chapter 3, IPCC special report on the ocean and cryosphere in a changing climate.
Overland, J., Dunlea, E., Box, J. E., Corell, R., Forsius, M., Kattsov, V., et al. (2019). The urgency of arctic change. Polar Science 21, 6–13.
Pavlova, O., Gerland, S., and Hop, H. (2019). “Changes in sea-ice extent and thickness in kongsfjorden, svalbard (2003–2016),” in The ecosystem of kongsfjorden, svalbard, eds. H. Hop and C. Wiencke (Cham: Springer International Publishing), 105–136. doi:10.1007/978-3-319-46425-1_4.

R version 4.0.4 (2021-02-15)
Platform: x86_64-pc-linux-gnu (64-bit)
Running under: Ubuntu 20.04.2 LTS

Matrix products: default
BLAS:   /usr/lib/x86_64-linux-gnu/blas/libblas.so.3.9.0
LAPACK: /usr/lib/x86_64-linux-gnu/lapack/liblapack.so.3.9.0

locale:
 [1] LC_CTYPE=en_GB.UTF-8       LC_NUMERIC=C              
 [3] LC_TIME=en_CA.UTF-8        LC_COLLATE=en_GB.UTF-8    
 [5] LC_MONETARY=en_CA.UTF-8    LC_MESSAGES=en_GB.UTF-8   
 [7] LC_PAPER=en_CA.UTF-8       LC_NAME=C                 
 [9] LC_ADDRESS=C               LC_TELEPHONE=C            
[11] LC_MEASUREMENT=en_CA.UTF-8 LC_IDENTIFICATION=C       

attached base packages:
[1] stats     graphics  grDevices utils     datasets  methods   base     

other attached packages:
 [1] kableExtra_1.3.4 DT_0.17          tidync_0.2.4     forcats_0.5.1   
 [5] stringr_1.4.0    dplyr_1.0.4      purrr_0.3.4      readr_1.4.0     
 [9] tidyr_1.1.2      tibble_3.1.0     ggplot2_3.3.3    tidyverse_1.3.0 
[13] workflowr_1.6.2 

loaded via a namespace (and not attached):
 [1] Rcpp_1.0.6        svglite_2.0.0     lubridate_1.7.9.2 assertthat_0.2.1 
 [5] rprojroot_2.0.2   digest_0.6.27     utf8_1.1.4        R6_2.5.0         
 [9] cellranger_1.1.0  backports_1.2.1   reprex_1.0.0      evaluate_0.14    
[13] highr_0.8         httr_1.4.2        pillar_1.5.0      rlang_0.4.10     
[17] readxl_1.3.1      ncmeta_0.3.0      rstudioapi_0.13   whisker_0.4      
[21] jquerylib_0.1.3   rmarkdown_2.7     webshot_0.5.2     htmlwidgets_1.5.3
[25] munsell_0.5.0     broom_0.7.5       compiler_4.0.4    httpuv_1.5.5     
[29] modelr_0.1.8      xfun_0.21         systemfonts_1.0.1 pkgconfig_2.0.3  
[33] htmltools_0.5.1.1 tidyselect_1.1.0  viridisLite_0.3.0 fansi_0.4.2      
[37] crayon_1.4.1      dbplyr_2.1.0      withr_2.4.1       later_1.1.0.1    
[41] grid_4.0.4        jsonlite_1.7.2    gtable_0.3.0      lifecycle_1.0.0  
[45] DBI_1.1.1         git2r_0.28.0      magrittr_2.0.1    scales_1.1.1     
[49] ncdf4_1.17        cli_2.3.1         stringi_1.5.3     fs_1.5.0         
[53] promises_1.2.0.1  xml2_1.3.2        bslib_0.2.4       ellipsis_0.3.1   
[57] generics_0.1.0    vctrs_0.3.6       tools_4.0.4       glue_1.4.2       
[61] RNetCDF_2.4-2     crosstalk_1.1.1   hms_1.0.0         yaml_2.2.1       
[65] colorspace_2.0-0  rvest_0.3.6       knitr_1.31        haven_2.3.1      
[69] sass_0.3.1