Last updated: 2022-10-31
Checks: 7 0
Knit directory:
locust-phase-transition-RNAseq/
This reproducible R Markdown analysis was created with workflowr (version 1.7.0). The Checks tab describes the reproducibility checks that were applied when the results were created. The Past versions tab lists the development history.
Great! Since the R Markdown file has been committed to the Git repository, you know the exact version of the code that produced these results.
Great job! The global environment was empty. Objects defined in the global environment can affect the analysis in your R Markdown file in unknown ways. For reproduciblity it’s best to always run the code in an empty environment.
The command set.seed(20221025) was run prior to running
the code in the R Markdown file. Setting a seed ensures that any results
that rely on randomness, e.g. subsampling or permutations, are
reproducible.
Great job! Recording the operating system, R version, and package versions is critical for reproducibility.
Nice! There were no cached chunks for this analysis, so you can be confident that you successfully produced the results during this run.
Great job! Using relative paths to the files within your workflowr project makes it easier to run your code on other machines.
Great! You are using Git for version control. Tracking code development and connecting the code version to the results is critical for reproducibility.
The results in this page were generated with repository version 1e2e9ae. See the Past versions tab to see a history of the changes made to the R Markdown and HTML files.
Note that you need to be careful to ensure that all relevant files for
the analysis have been committed to Git prior to generating the results
(you can use wflow_publish or
wflow_git_commit). workflowr only checks the R Markdown
file, but you know if there are other scripts or data files that it
depends on. Below is the status of the Git repository when the results
were generated:
Ignored files:
Ignored: .DS_Store
Ignored: analysis/.DS_Store
Ignored: data/.DS_Store
Ignored: data/americana/.DS_Store
Ignored: data/americana/STAR_counts_4thcol/.DS_Store
Ignored: data/cancellata/.DS_Store
Ignored: data/cancellata/STAR_counts_4thcol/.DS_Store
Ignored: data/cubense/.DS_Store
Ignored: data/cubense/STAR_counts_4thcol/.DS_Store
Ignored: data/gregaria/.DS_Store
Ignored: data/gregaria/STAR_counts_4thcol/.DS_Store
Ignored: data/gregaria/list/.DS_Store
Ignored: data/metadata/.DS_Store
Ignored: data/nitens/.DS_Store
Ignored: data/nitens/STAR_counts_4thcol/.DS_Store
Ignored: data/piceifrons/.DS_Store
Ignored: data/piceifrons/STAR_counts_4thcol/.DS_Store
Ignored: data/piceifrons/list/.DS_Store
Note that any generated files, e.g. HTML, png, CSS, etc., are not included in this status report because it is ok for generated content to have uncommitted changes.
These are the previous versions of the repository in which changes were
made to the R Markdown (analysis/own-refseq.Rmd) and HTML
(docs/own-refseq.html) files. If you’ve configured a remote
Git repository (see ?wflow_git_remote), click on the
hyperlinks in the table below to view the files as they were in that
past version.
| File | Version | Author | Date | Message |
|---|---|---|---|---|
| html | ea70380 | MaevaTecher | 2022-10-31 | Build site. |
| Rmd | de64b6b | MaevaTecher | 2022-10-31 | wflow_publish(c("analysis/_site.yml", "analysis/map-refseq.Rmd", |
This document was written in R Markdown, and translated into html
using the R package knitr. Press the buttons labelled
Code to show or hide the R code used to produce each
table, plot or statistical result. You can also select Show all
code at the top of the page.
library("knitr")
library("rmdformats")
library("tidyverse")
library("DT") # for making interactive search table
library("plotly") # for interactive plots
library("ggthemes") # for theme_calc
library("reshape2")
## Global options
options(max.print="10000")
knitr::opts_chunk$set(
echo = TRUE,
message = FALSE,
warning = FALSE,
cache = FALSE,
comment = FALSE,
prompt = FALSE,
tidy = TRUE
)
opts_knit$set(width=75)# Load our SRA metadata table
metaseq <- read_table("data/metadata/RNAseq_modified_METADATA2022.txt", col_names = TRUE,
guess_max = 5000)
## Create an interactive search table
metaseq %>%
datatable(extensions = "Buttons", options = list(dom = "Blfrtip", buttons = c("copy",
"csv", "excel"), lengthMenu = list(c(10, 20, 50, 100, 200, -1), c(10, 20,
50, 100, 200, "All"))))mycol_species <- c("green", "deeppink", "orange", "orange2", "blue2", "red2", "yellow2")
## READS AVERAGE colored by STATUS
eren <- ggplot(metaseq, aes(x = Map_SUM, y = Inputtrim_reads, color = Species, label = SampleID))
eren <- eren + geom_point(size = 2, alpha = 0.7)
eren <- eren + scale_color_manual(values = mycol_species)
eren <- eren + theme_calc()
eren <- eren + geom_hline(yintercept = 3e+07, linetype = "dotted", color = "green3")
eren <- eren + geom_hline(yintercept = 5e+07, linetype = "dotted", color = "green3")
eren <- eren + geom_vline(xintercept = 80, linetype = "dotted", color = "blue2")
eren <- eren + xlim(0, 100)
options(scipen = 20) #to remove the scientific annotation of the axis
## make an interactive version of the scatter plot
attacktitan <- ggplotly(eren)
attacktitanWe added the green thresholds to indicate how many reads are recommended by Illumina (lower end and optimal). The blue line demonstrates where the mapping ratio could be considered not contaminated.
## READS AVERAGE colored by STATUS
mikasa <- ggplot(metaseq, aes(x = Map_SUM, y = Inputtrim_reads, color = Species,
label = SampleID))
mikasa <- mikasa + geom_point(size = 2, alpha = 0.7)
mikasa <- mikasa + scale_color_manual(values = mycol_species)
mikasa <- mikasa + theme_calc()
mikasa <- mikasa + geom_hline(yintercept = 30000000, linetype = "dotted", color = "green3")
mikasa <- mikasa + geom_hline(yintercept = 50000000, linetype = "dotted", color = "green3")
mikasa <- mikasa + geom_vline(xintercept = 80, linetype = "dotted", color = "blue2")
mikasa <- mikasa + xlim(0, 100)
options(scipen = 20) #to remove the scientific annotation of the axis
## make an interactive version of the scatter plot
attacktitan <- ggplotly(eren)
attacktitanWe added the green thresholds to indicate how many reads are recommended by Illumina (lower end and optimal). The blue line demonstrates where the mapping ratio could be considered not contaminated.
sessionInfo()FALSE R version 4.2.1 (2022-06-23)
FALSE Platform: x86_64-apple-darwin17.0 (64-bit)
FALSE Running under: macOS Big Sur ... 10.16
FALSE
FALSE Matrix products: default
FALSE BLAS: /Library/Frameworks/R.framework/Versions/4.2/Resources/lib/libRblas.0.dylib
FALSE LAPACK: /Library/Frameworks/R.framework/Versions/4.2/Resources/lib/libRlapack.dylib
FALSE
FALSE locale:
FALSE [1] en_US.UTF-8/en_US.UTF-8/en_US.UTF-8/C/en_US.UTF-8/en_US.UTF-8
FALSE
FALSE attached base packages:
FALSE [1] stats graphics grDevices utils datasets methods base
FALSE
FALSE other attached packages:
FALSE [1] reshape2_1.4.4 ggthemes_4.2.4 plotly_4.10.0 DT_0.26
FALSE [5] forcats_0.5.2 stringr_1.4.1 dplyr_1.0.10 purrr_0.3.5
FALSE [9] readr_2.1.3 tidyr_1.2.1 tibble_3.1.8 ggplot2_3.3.6
FALSE [13] tidyverse_1.3.2 rmdformats_1.0.4 knitr_1.40 workflowr_1.7.0
FALSE
FALSE loaded via a namespace (and not attached):
FALSE [1] fs_1.5.2 lubridate_1.8.0 httr_1.4.4
FALSE [4] rprojroot_2.0.3 tools_4.2.1 backports_1.4.1
FALSE [7] bslib_0.4.0 utf8_1.2.2 R6_2.5.1
FALSE [10] DBI_1.1.3 lazyeval_0.2.2 colorspace_2.0-3
FALSE [13] withr_2.5.0 tidyselect_1.2.0 processx_3.7.0
FALSE [16] compiler_4.2.1 git2r_0.30.1 cli_3.4.1
FALSE [19] rvest_1.0.3 formatR_1.12 xml2_1.3.3
FALSE [22] labeling_0.4.2 bookdown_0.29 sass_0.4.2
FALSE [25] scales_1.2.1 callr_3.7.2 digest_0.6.30
FALSE [28] rmarkdown_2.17 pkgconfig_2.0.3 htmltools_0.5.3
FALSE [31] dbplyr_2.2.1 fastmap_1.1.0 htmlwidgets_1.5.4
FALSE [34] rlang_1.0.6 readxl_1.4.1 rstudioapi_0.14
FALSE [37] jquerylib_0.1.4 generics_0.1.3 jsonlite_1.8.3
FALSE [40] crosstalk_1.2.0 googlesheets4_1.0.1 magrittr_2.0.3
FALSE [43] Rcpp_1.0.9 munsell_0.5.0 fansi_1.0.3
FALSE [46] lifecycle_1.0.3 stringi_1.7.8 whisker_0.4
FALSE [49] yaml_2.3.6 plyr_1.8.7 grid_4.2.1
FALSE [52] promises_1.2.0.1 crayon_1.5.2 haven_2.5.1
FALSE [55] hms_1.1.2 ps_1.7.1 pillar_1.8.1
FALSE [58] reprex_2.0.2 glue_1.6.2 evaluate_0.17
FALSE [61] getPass_0.2-2 data.table_1.14.4 modelr_0.1.9
FALSE [64] vctrs_0.5.0 tzdb_0.3.0 httpuv_1.6.6
FALSE [67] cellranger_1.1.0 gtable_0.3.1 assertthat_0.2.1
FALSE [70] cachem_1.0.6 xfun_0.34 broom_1.0.1
FALSE [73] later_1.3.0 googledrive_2.0.0 viridisLite_0.4.1
FALSE [76] gargle_1.2.1 ellipsis_0.3.2