Last updated: 2019-03-11

Checks: 6 0

Knit directory: threeprimeseq/analysis/

This reproducible R Markdown analysis was created with workflowr (version 1.2.0). The Report tab describes the reproducibility checks that were applied when the results were created. The Past versions tab lists the development history.

R Markdown file: up-to-date

Great! Since the R Markdown file has been committed to the Git repository, you know the exact version of the code that produced these results.

Environment: empty

Great job! The global environment was empty. Objects defined in the global environment can affect the analysis in your R Markdown file in unknown ways. For reproduciblity it’s best to always run the code in an empty environment.

Seed: set.seed(12345)

The command set.seed(12345) was run prior to running the code in the R Markdown file. Setting a seed ensures that any results that rely on randomness, e.g. subsampling or permutations, are reproducible.

Session information: recorded

Great job! Recording the operating system, R version, and package versions is critical for reproducibility.

Cache: none

Nice! There were no cached chunks for this analysis, so you can be confident that you successfully produced the results during this run.

Repository version: 90eefa7

Great! You are using Git for version control. Tracking code development and connecting the code version to the results is critical for reproducibility. The version displayed above was the version of the Git repository at the time these results were generated.

Note that you need to be careful to ensure that all relevant files for the analysis have been committed to Git prior to generating the results (you can use wflow_publish or wflow_git_commit). workflowr only checks the R Markdown file, but you know if there are other scripts or data files that it depends on. Below is the status of the Git repository when the results were generated: 


Ignored files:
    Ignored:    .DS_Store
    Ignored:    .Rhistory
    Ignored:    .Rproj.user/
    Ignored:    data/.DS_Store
    Ignored:    data/perm_QTL_trans_noMP_5percov/
    Ignored:    output/.DS_Store

Untracked files:
    Untracked:  KalistoAbundance18486.txt
    Untracked:  analysis/4suDataIGV.Rmd
    Untracked:  analysis/DirectionapaQTL.Rmd
    Untracked:  analysis/EmpDistforOverlaps.Rmd
    Untracked:  analysis/EvaleQTLs.Rmd
    Untracked:  analysis/YL_QTL_test.Rmd
    Untracked:  analysis/groSeqAnalysis.Rmd
    Untracked:  analysis/ncbiRefSeq_sm.sort.mRNA.bed
    Untracked:  analysis/snake.config.notes.Rmd
    Untracked:  analysis/verifyBAM.Rmd
    Untracked:  analysis/verifybam_dubs.Rmd
    Untracked:  code/PeaksToCoverPerReads.py
    Untracked:  code/strober_pc_pve_heatmap_func.R
    Untracked:  data/18486.genecov.txt
    Untracked:  data/APApeaksYL.total.inbrain.bed
    Untracked:  data/AllPeak_counts/
    Untracked:  data/ApaQTLs/
    Untracked:  data/ApaQTLs_otherPhen/
    Untracked:  data/ChromHmmOverlap/
    Untracked:  data/DistTXN2Peak_genelocAnno/
    Untracked:  data/FeatureoverlapPeaks/
    Untracked:  data/GM12878.chromHMM.bed
    Untracked:  data/GM12878.chromHMM.txt
    Untracked:  data/GWAS_overlap/
    Untracked:  data/LianoglouLCL/
    Untracked:  data/LocusZoom/
    Untracked:  data/LocusZoom_Unexp/
    Untracked:  data/LocusZoom_proc/
    Untracked:  data/MatchedSnps/
    Untracked:  data/NucSpecQTL/
    Untracked:  data/NuclearApaQTLs.txt
    Untracked:  data/PeakCounts/
    Untracked:  data/PeakCounts_noMP_5perc/
    Untracked:  data/PeakCounts_noMP_genelocanno/
    Untracked:  data/PeakUsage/
    Untracked:  data/PeakUsage_noMP/
    Untracked:  data/PeakUsage_noMP_GeneLocAnno/
    Untracked:  data/PeaksUsed/
    Untracked:  data/PeaksUsed_noMP_5percCov/
    Untracked:  data/PolyA_DB/
    Untracked:  data/QTL_overlap/
    Untracked:  data/RNAkalisto/
    Untracked:  data/RefSeq_annotations/
    Untracked:  data/Replicates_usage/
    Untracked:  data/Signal_Loc/
    Untracked:  data/TotalApaQTLs.txt
    Untracked:  data/Totalpeaks_filtered_clean.bed
    Untracked:  data/UnderstandPeaksQC/
    Untracked:  data/WASP_STAT/
    Untracked:  data/YL-SP-18486-T-combined-genecov.txt
    Untracked:  data/YL-SP-18486-T_S9_R1_001-genecov.txt
    Untracked:  data/YL_QTL_test/
    Untracked:  data/apaExamp/
    Untracked:  data/apaExamp_proc/
    Untracked:  data/apaQTL_examp_noMP/
    Untracked:  data/bedgraph_peaks/
    Untracked:  data/bin200.5.T.nuccov.bed
    Untracked:  data/bin200.Anuccov.bed
    Untracked:  data/bin200.nuccov.bed
    Untracked:  data/clean_peaks/
    Untracked:  data/comb_map_stats.csv
    Untracked:  data/comb_map_stats.xlsx
    Untracked:  data/comb_map_stats_39ind.csv
    Untracked:  data/combined_reads_mapped_three_prime_seq.csv
    Untracked:  data/diff_iso_GeneLocAnno/
    Untracked:  data/diff_iso_proc/
    Untracked:  data/diff_iso_trans/
    Untracked:  data/eQTLs_Lietal/
    Untracked:  data/ensemble_to_genename.txt
    Untracked:  data/example_gene_peakQuant/
    Untracked:  data/explainProtVar/
    Untracked:  data/filtPeakOppstrand_cov_noMP_GeneLocAnno_5perc/
    Untracked:  data/filtered_APApeaks_merged_allchrom_refseqTrans.closest2End.bed
    Untracked:  data/filtered_APApeaks_merged_allchrom_refseqTrans.closest2End.noties.bed
    Untracked:  data/first50lines_closest.txt
    Untracked:  data/gencov.test.csv
    Untracked:  data/gencov.test.txt
    Untracked:  data/gencov_zero.test.csv
    Untracked:  data/gencov_zero.test.txt
    Untracked:  data/gene_cov/
    Untracked:  data/joined
    Untracked:  data/leafcutter/
    Untracked:  data/merged_combined_YL-SP-threeprimeseq.bg
    Untracked:  data/molPheno_noMP/
    Untracked:  data/mol_overlap/
    Untracked:  data/mol_pheno/
    Untracked:  data/nom_QTL/
    Untracked:  data/nom_QTL_opp/
    Untracked:  data/nom_QTL_trans/
    Untracked:  data/nuc6up/
    Untracked:  data/nuc_10up/
    Untracked:  data/other_qtls/
    Untracked:  data/pQTL_otherphen/
    Untracked:  data/pacbio_cov/
    Untracked:  data/peakPerRefSeqGene/
    Untracked:  data/peaks4DT/
    Untracked:  data/perm_QTL/
    Untracked:  data/perm_QTL_GeneLocAnno_noMP_5percov/
    Untracked:  data/perm_QTL_GeneLocAnno_noMP_5percov_3UTR/
    Untracked:  data/perm_QTL_diffWindow/
    Untracked:  data/perm_QTL_opp/
    Untracked:  data/perm_QTL_trans/
    Untracked:  data/perm_QTL_trans_filt/
    Untracked:  data/protAndAPAAndExplmRes.Rda
    Untracked:  data/protAndAPAlmRes.Rda
    Untracked:  data/protAndExpressionlmRes.Rda
    Untracked:  data/reads_mapped_three_prime_seq.csv
    Untracked:  data/smash.cov.results.bed
    Untracked:  data/smash.cov.results.csv
    Untracked:  data/smash.cov.results.txt
    Untracked:  data/smash_testregion/
    Untracked:  data/ssFC200.cov.bed
    Untracked:  data/temp.file1
    Untracked:  data/temp.file2
    Untracked:  data/temp.gencov.test.txt
    Untracked:  data/temp.gencov_zero.test.txt
    Untracked:  data/threePrimeSeqMetaData.csv
    Untracked:  data/threePrimeSeqMetaData55Ind.txt
    Untracked:  data/threePrimeSeqMetaData55Ind.xlsx
    Untracked:  data/threePrimeSeqMetaData55Ind_noDup.txt
    Untracked:  data/threePrimeSeqMetaData55Ind_noDup.xlsx
    Untracked:  data/threePrimeSeqMetaData55Ind_noDup_WASPMAP.txt
    Untracked:  data/threePrimeSeqMetaData55Ind_noDup_WASPMAP.xlsx
    Untracked:  output/LZ/
    Untracked:  output/deeptools_plots/
    Untracked:  output/picard/
    Untracked:  output/plots/
    Untracked:  output/qual.fig2.pdf

Unstaged changes:
    Modified:   analysis/28ind.peak.explore.Rmd
    Modified:   analysis/CompareLianoglouData.Rmd
    Modified:   analysis/NewPeakPostMP.Rmd
    Modified:   analysis/NuclearSpecQTL.Rmd
    Modified:   analysis/SignalSiteLoc.Rmd
    Modified:   analysis/apaQTLoverlapGWAS.Rmd
    Modified:   analysis/characterize_apaQTLs.Rmd
    Modified:   analysis/cleanupdtseq.internalpriming.Rmd
    Modified:   analysis/coloc_apaQTLs_protQTLs.Rmd
    Modified:   analysis/dif.iso.usage.leafcutter.Rmd
    Modified:   analysis/diff_iso_pipeline.Rmd
    Modified:   analysis/explainpQTLs.Rmd
    Modified:   analysis/explore.filters.Rmd
    Modified:   analysis/fixBWChromNames.Rmd
    Modified:   analysis/flash2mash.Rmd
    Modified:   analysis/initialPacBioQuant.Rmd
    Modified:   analysis/mispriming_approach.Rmd
    Modified:   analysis/overlapMolQTL.Rmd
    Modified:   analysis/overlapMolQTL.opposite.Rmd
    Modified:   analysis/overlap_qtls.Rmd
    Modified:   analysis/peakOverlap_oppstrand.Rmd
    Modified:   analysis/peakQCPPlots.Rmd
    Modified:   analysis/pheno.leaf.comb.Rmd
    Modified:   analysis/pipeline_55Ind.Rmd
    Modified:   analysis/swarmPlots_QTLs.Rmd
    Modified:   analysis/test.max2.Rmd
    Modified:   analysis/test.smash.Rmd
    Modified:   analysis/understandPeaks.Rmd
    Modified:   analysis/unexplainedeQTL_analysis.Rmd
    Modified:   code/Snakefile

Note that any generated files, e.g. HTML, png, CSS, etc., are not included in this status report because it is ok for generated content to have uncommitted changes.

These are the previous versions of the R Markdown and HTML files. If you’ve configured a remote Git repository (see ?wflow_git_remote), click on the hyperlinks in the table below to view them.

File Version Author Date Message
Rmd 90eefa7 Briana Mittleman 2019-03-11 try UTR
html 8a6b54e Briana Mittleman 2019-03-11 Build site.
Rmd 8871122 Briana Mittleman 2019-03-11 subset to x% 
library(workflowr)
This is workflowr version 1.2.0
Run ?workflowr for help getting started
library(tidyverse)
── Attaching packages ───────────────────────────────────────────────────────────────────────────────────── tidyverse 1.2.1 ──
✔ ggplot2 3.1.0       ✔ purrr   0.3.1  
✔ tibble  2.0.1       ✔ dplyr   0.8.0.1
✔ tidyr   0.8.3       ✔ stringr 1.4.0  
✔ readr   1.3.1       ✔ forcats 0.4.0  
Warning: package 'tibble' was built under R version 3.5.2
Warning: package 'tidyr' was built under R version 3.5.2
Warning: package 'purrr' was built under R version 3.5.2
Warning: package 'dplyr' was built under R version 3.5.2
Warning: package 'stringr' was built under R version 3.5.2
Warning: package 'forcats' was built under R version 3.5.2
── Conflicts ──────────────────────────────────────────────────────────────────────────────────────── tidyverse_conflicts() ──
✖ dplyr::filter() masks stats::filter()
✖ dplyr::lag()    masks stats::lag()
library(reshape2)

Attaching package: 'reshape2'
The following object is masked from 'package:tidyr':

    smiths
library(cowplot)
Warning: package 'cowplot' was built under R version 3.5.2

Attaching package: 'cowplot'
The following object is masked from 'package:ggplot2':

    ggsave

I want to collect the peaks up to X% usage and show the total/nuclear 3’ seq and RNA seq read buildup at these peaks.

To do this I need all of the peaks, i can group by mean usage and look at cumulative sum. I will have to think about the + and - peaks.

I will do this based on the nuclear mean usage.

NucMeanPeakUsage=read.table("../data/PeakUsage_noMP_GeneLocAnno/filtered_APApeaks_merged_allchrom_refseqGenes.GeneLocAnno.NoMP_sm_quant.Nuclear_fixed.pheno.5percPeaks.txt",stringsAsFactors = F, col.names = c("chr", "start","end", "gene", "strand", "peak", "meanUsage"))

NucMeanPeakUsage_neg=NucMeanPeakUsage %>% filter(strand=="-")
NucMeanPeakUsage_pos=NucMeanPeakUsage %>% filter(strand=="+")

Do the positive strand first:

I should only do this for genes with at least 2 peaks

NucMeanPeakUsage_pos_10perc=NucMeanPeakUsage_pos %>% group_by(gene) %>% mutate(CumMean=cumsum(meanUsage), nPeaks=n()) %>%
 filter(nPeaks>1) %>% filter(CumMean < .1)


NucMeanPeakUsage_pos_50perc=NucMeanPeakUsage_pos %>% group_by(gene) %>% mutate(CumMean=cumsum(meanUsage), nPeaks=n()) %>%
 filter(nPeaks>1) %>% filter(CumMean < .5)

For the negative strand:

NucMeanPeakUsage_neg_10perc=NucMeanPeakUsage_neg %>% group_by(gene) %>% mutate(CumMean=rev(cumsum(rev(meanUsage))), nPeaks=n()) %>% filter(nPeaks>1)  %>% filter(CumMean < .1)

NucMeanPeakUsage_neg_50perc=NucMeanPeakUsage_neg %>% group_by(gene) %>% mutate(CumMean=rev(cumsum(rev(meanUsage))), nPeaks=n()) %>% filter(nPeaks>1)  %>% filter(CumMean < .5)

I will plot the up to 50% peaks first:

Join pos and neg

NucMeanPeakUsage_50perc =as.data.frame(rbind(NucMeanPeakUsage_neg_50perc, NucMeanPeakUsage_pos_50perc))


NucMeanPeakUsage_10perc =as.data.frame(rbind(NucMeanPeakUsage_neg_10perc, NucMeanPeakUsage_pos_10perc))




#write.table(NucMeanPeakUsage_50perc, file="../data/PeakUsage_noMP_GeneLocAnno/NucPeaksTo50perc.txt", sep="\t", row.names = F, col.names = F,quote=F)
#write.table(NucMeanPeakUsage_10perc, file="../data/PeakUsage_noMP_GeneLocAnno/NucPeaksTo10perc.txt", sep="\t", row.names = F, col.names = F,quote=F)

I want to filter the deep tools peaks on these:

/project2/gilad/briana/threeprimeseq/data/peaks4DT/NucPeaksTo50perc.txt

/project2/gilad/briana/threeprimeseq/data/peaks4DT/APAPeaks_allPeaks_fixedStrand.bed

subsetPeak_uptoXper.py

def main(filterFile, outfile):
  inBed=open("/project2/gilad/briana/threeprimeseq/data/peaks4DT/APAPeaks_allPeaks_fixedStrand.bed", "r")
  outF=open(outfile, "w")
  filt=open(filterFile,"r")
  okDic={}
  for ln in filt: 
    peak=ln.split()[5]
    okDic[peak]=""
  for ln in inBed: 
    peak=ln.split()[3].split(":")[0]
    if peak in okDic.keys():
        outF.write(ln)
  outF.close()    


if __name__ == "__main__":
    import sys
    import pybedtools
    filterFile=sys.argv[1]
    outfile=sys.argv[2]
    main(filterFile, outfile)

Run this with the 50% and 10% peaks

python subsetPeak_uptoXper.py /project2/gilad/briana/threeprimeseq/data/peaks4DT/NucPeaksTo50perc.txt /project2/gilad/briana/threeprimeseq/data/peaks4DT/APAPeaks_NucPeakto50perc_fixedStrand.bed
python subsetPeak_uptoXper.py /project2/gilad/briana/threeprimeseq/data/peaks4DT/NucPeaksTo10perc.txt /project2/gilad/briana/threeprimeseq/data/peaks4DT/APAPeaks_NucPeakto10perc_fixedStrand.bed

Run the deeptools plots

DTPlot_Nuc50percCov.sh

#!/bin/bash

#SBATCH --job-name=DTPlot_Nuc50percCov
#SBATCH --account=pi-yangili1
#SBATCH --time=36:00:00
#SBATCH --output=DTPlot_Nuc50percCov.out
#SBATCH --error=DTPlot_Nuc50percCov.err
#SBATCH --partition=bigmem2
#SBATCH --mem=100G
#SBATCH --mail-type=END

module load Anaconda3
source activate three-prime-env


computeMatrix reference-point -S /project2/gilad/briana/threeprimeseq/data/mergedBW/Total_MergedBamCoverage.bw /project2/gilad/briana/threeprimeseq/data/mergedBW/Nuclear_MergedBamCoverage.bw -R /project2/gilad/briana/threeprimeseq/data/peaks4DT/APAPeaks_NucPeakto50perc_fixedStrand.bed -b 50 -a 50  -out /project2/gilad/briana/threeprimeseq/data/DT_up2Xperc/BothFrac_nuc50perc_Nompfilt.gz

plotHeatmap --sortRegions descend -m /project2/gilad/briana/threeprimeseq/data/DT_up2Xperc/BothFrac_nuc50perc_Nompfilt.gz --refPointLabel "PAS" --plotTitle "Combined Reads at PAS up to 50%" --heatmapHeight 7 --colorMap YlGnBu  -out /project2/gilad/briana/threeprimeseq/data/DT_up2Xperc/BothFrac_nuc50perc_Nompfilt.png

computeMatrix reference-point -S /project2/gilad/briana/threeprimeseq/data/rnaseq_bw/RNAseqGeuvadis_STAR_6samp_MergedBams.sort.bw -R /project2/gilad/briana/threeprimeseq/data/peaks4DT/APAPeaks_NucPeakto50perc_fixedStrand.bed -b 50 -a 50  -out /project2/gilad/briana/threeprimeseq/data/DT_up2Xperc/RNA_nuc50perc_Nompfilt.gz

plotHeatmap --sortRegions descend -m /project2/gilad/briana/threeprimeseq/data/DT_up2Xperc/RNA_nuc50perc_Nompfilt.gz --refPointLabel "PAS" --plotTitle "RNA seq at PAS up to 50%" --heatmapHeight 7 --colorMap YlGnBu  -out /project2/gilad/briana/threeprimeseq/data/DT_up2Xperc/RNA_nuc50perc_Nompfilt.png

DTPlot_Nuc10percCov.sh

#!/bin/bash

#SBATCH --job-name=DTPlot_Nuc10percCov
#SBATCH --account=pi-yangili1
#SBATCH --time=36:00:00
#SBATCH --output=DTPlot_Nuc10percCov.out
#SBATCH --error=DTPlot_Nuc10percCov.err
#SBATCH --partition=bigmem2
#SBATCH --mem=100G
#SBATCH --mail-type=END

module load Anaconda3
source activate three-prime-env


computeMatrix reference-point -S /project2/gilad/briana/threeprimeseq/data/mergedBW/Total_MergedBamCoverage.bw /project2/gilad/briana/threeprimeseq/data/mergedBW/Nuclear_MergedBamCoverage.bw -R /project2/gilad/briana/threeprimeseq/data/peaks4DT/APAPeaks_NucPeakto10perc_fixedStrand.bed -b 50 -a 50  -out /project2/gilad/briana/threeprimeseq/data/DT_up2Xperc/BothFrac_nuc10perc_Nompfilt.gz

plotHeatmap --sortRegions descend -m /project2/gilad/briana/threeprimeseq/data/DT_up2Xperc/BothFrac_nuc10perc_Nompfilt.gz --refPointLabel "PAS" --plotTitle "Combined Reads at PAS up to 10%" --heatmapHeight 7 --colorMap YlGnBu  -out /project2/gilad/briana/threeprimeseq/data/DT_up2Xperc/BothFrac_nuc10perc_Nompfilt.png

computeMatrix reference-point -S /project2/gilad/briana/threeprimeseq/data/rnaseq_bw/RNAseqGeuvadis_STAR_6samp_MergedBams.sort.bw -R /project2/gilad/briana/threeprimeseq/data/peaks4DT/APAPeaks_NucPeakto10perc_fixedStrand.bed -b 50 -a 50  -out /project2/gilad/briana/threeprimeseq/data/DT_up2Xperc/RNA_nuc10perc_Nompfilt.gz

plotHeatmap --sortRegions descend -m /project2/gilad/briana/threeprimeseq/data/DT_up2Xperc/RNA_nuc10perc_Nompfilt.gz --refPointLabel "PAS" --plotTitle "RNA seq at PAS up to 10%" --heatmapHeight 7 --colorMap YlGnBu  -out /project2/gilad/briana/threeprimeseq/data/DT_up2Xperc/RNA_nuc10perc_Nompfilt.png

Top ten (>90)

NucMeanPeakUsage_neg_top10perc=NucMeanPeakUsage_neg %>% group_by(gene) %>% mutate(CumMean=rev(cumsum(rev(meanUsage))), nPeaks=n()) %>% filter(nPeaks>1)  %>% filter(CumMean > .9)

NucMeanPeakUsage_pos_top10perc=NucMeanPeakUsage_pos %>% group_by(gene) %>% mutate(CumMean=cumsum(meanUsage), nPeaks=n()) %>%
 filter(nPeaks>1) %>% filter(CumMean <.9)


NucMeanPeakUsage_top10perc =as.data.frame(rbind(NucMeanPeakUsage_neg_top10perc, NucMeanPeakUsage_pos_top10perc))

write.table(NucMeanPeakUsage_top10perc, file="../data/PeakUsage_noMP_GeneLocAnno/NucPeaksTOP10perc.txt", sep="\t", row.names = F, col.names = F,quote=F)
python subsetPeak_uptoXper.py /project2/gilad/briana/threeprimeseq/data/peaks4DT/NucPeaksTOP10perc.txt /project2/gilad/briana/threeprimeseq/data/peaks4DT/APAPeaks_NucPeakTOP10perc_fixedStrand.bed

DTPlot_NucTop10percCov.sh

#!/bin/bash

#SBATCH --job-name=DTPlot_NucTop10percCov
#SBATCH --account=pi-yangili1
#SBATCH --time=36:00:00
#SBATCH --output=DTPlot_NucTop10percCov.out
#SBATCH --error=DTPlot_NucTop10percCov.err
#SBATCH --partition=broadwl
#SBATCH --mem=36G
#SBATCH --mail-type=END

module load Anaconda3
source activate three-prime-env


computeMatrix reference-point -S /project2/gilad/briana/threeprimeseq/data/mergedBW/Total_MergedBamCoverage.bw /project2/gilad/briana/threeprimeseq/data/mergedBW/Nuclear_MergedBamCoverage.bw -R /project2/gilad/briana/threeprimeseq/data/peaks4DT/APAPeaks_NucPeakTOP10perc_fixedStrand.bed -b 50 -a 50  -out /project2/gilad/briana/threeprimeseq/data/DT_up2Xperc/BothFrac_nucTop10perc_Nompfilt.gz

plotHeatmap --sortRegions descend -m /project2/gilad/briana/threeprimeseq/data/DT_up2Xperc/BothFrac_nucTop10perc_Nompfilt.gz --refPointLabel "PAS" --plotTitle "Combined Reads at PAS up to 10%" --heatmapHeight 7 --colorMap YlGnBu  -out /project2/gilad/briana/threeprimeseq/data/DT_up2Xperc/BothFrac_nucTop10perc_Nompfilt.png

computeMatrix reference-point -S /project2/gilad/briana/threeprimeseq/data/rnaseq_bw/RNAseqGeuvadis_STAR_6samp_MergedBams.sort.bw -R /project2/gilad/briana/threeprimeseq/data/peaks4DT/APAPeaks_NucPeakTOP10perc_fixedStrand.bed -b 50 -a 50  -out /project2/gilad/briana/threeprimeseq/data/DT_up2Xperc/RNA_nucTop10perc_Nompfilt.gz

plotHeatmap --sortRegions descend -m /project2/gilad/briana/threeprimeseq/data/DT_up2Xperc/RNA_nucTop10perc_Nompfilt.gz --refPointLabel "PAS" --plotTitle "RNA seq at PAS up to 10%" --heatmapHeight 7 --colorMap YlGnBu  -out /project2/gilad/briana/threeprimeseq/data/DT_up2Xperc/RNA_nucTop10perc_Nompfilt.png

Subset to genes with 5 peaks:

NucMeanPeakUsage_10perc_5peak= NucMeanPeakUsage_10perc %>% filter(nPeaks>=5)
#write.table(NucMeanPeakUsage_10perc_5peak, file="../data/PeakUsage_noMP_GeneLocAnno/NucPeaksTo10perc_5peaks.txt", sep="\t", row.names = F, col.names = F,quote=F)
python subsetPeak_uptoXper.py /project2/gilad/briana/threeprimeseq/data/peaks4DT/NucPeaksTo10perc_5peaks.txt /project2/gilad/briana/threeprimeseq/data/peaks4DT/APAPeaks_NucPeakto10perc_5peaks_fixedStrand.bed

DTPlot_Nuc10percCov_5peaks.sh

#!/bin/bash

#SBATCH --job-name=DTPlot_Nuc10percCov_5peaks
#SBATCH --account=pi-yangili1
#SBATCH --time=36:00:00
#SBATCH --output=DTPlot_Nuc10percCov_5peaks.out
#SBATCH --error=DTPlot_Nuc10percCov_5peaks.err
#SBATCH --partition=broadwl
#SBATCH --mem=36G
#SBATCH --mail-type=END

module load Anaconda3
source activate three-prime-env


computeMatrix reference-point -S /project2/gilad/briana/threeprimeseq/data/mergedBW/Total_MergedBamCoverage.bw /project2/gilad/briana/threeprimeseq/data/mergedBW/Nuclear_MergedBamCoverage.bw -R /project2/gilad/briana/threeprimeseq/data/peaks4DT/APAPeaks_NucPeakto10perc_5peaks_fixedStrand.bed -b 50 -a 50  -out /project2/gilad/briana/threeprimeseq/data/DT_up2Xperc/BothFrac_nuc10perc5peaks_Nompfilt.gz

plotHeatmap --sortRegions descend -m /project2/gilad/briana/threeprimeseq/data/DT_up2Xperc/BothFrac_nuc10perc5peaks_Nompfilt.gz --refPointLabel "PAS" --plotTitle "Combined Reads at PAS up to 10%, 5 peaks" --heatmapHeight 7 --colorMap YlGnBu  -out /project2/gilad/briana/threeprimeseq/data/DT_up2Xperc/BothFrac_nucTop10perc5peaks_Nompfilt.png

computeMatrix reference-point -S /project2/gilad/briana/threeprimeseq/data/rnaseq_bw/RNAseqGeuvadis_STAR_6samp_MergedBams.sort.bw -R /project2/gilad/briana/threeprimeseq/data/peaks4DT/APAPeaks_NucPeakto10perc_5peaks_fixedStrand.bed -b 50 -a 50  -out /project2/gilad/briana/threeprimeseq/data/DT_up2Xperc/RNA_nuc10perc5peaks_Nompfilt.gz

plotHeatmap --sortRegions descend -m /project2/gilad/briana/threeprimeseq/data/DT_up2Xperc/RNA_nuc10perc5peaks_Nompfilt.gz --refPointLabel "PAS" --plotTitle "RNA seq at PAS up to 10%, 5 peaks" --heatmapHeight 7 --colorMap YlGnBu  -out /project2/gilad/briana/threeprimeseq/data/DT_up2Xperc/RNA_nuc10perc5peaks_Nompfilt.png

Change to just last base of PAS

I am now centering on the PAS. I want to center on the end of the peak. I can make a script that will take these files and change the bedfile to just be the last base in the peak (PAS)

Peak2PAS.py

def main(InFile, outfile):
  outF=open(outfile, "w")
  inF=open(InFile,"r")
  for ln in inF:
      chrom, start, end, peak, score, strand = ln.split()
      if strand=="+":
          start2=int(end)-1
          end2=int(end)
      else:
          start2=int(start) - 1
          end2=int(start)
      outF.write("%s\t%d\t%d\t%s\t%s\t%s\n"%(chrom, start2, end2, peak, score, strand))
  outF.close()    

if __name__ == "__main__":
    import sys
    InFile=sys.argv[1]
    outfile=sys.argv[2]
    main(InFile, outfile) 
python Peak2PAS.py /project2/gilad/briana/threeprimeseq/data/peaks4DT/APAPeaks_NucPeakto10perc_fixedStrand.bed /project2/gilad/briana/threeprimeseq/data/peaks4DT/APAPAS_NucPeakto10perc_fixedStrand.bed

 
python Peak2PAS.py  /project2/gilad/briana/threeprimeseq/data/peaks4DT/APAPeaks_NucPeakTOP10perc_fixedStrand.bed /project2/gilad/briana/threeprimeseq/data/peaks4DT/APAPAS_NucPeakTOP10perc_fixedStrand.bed


python Peak2PAS.py  /project2/gilad/briana/threeprimeseq/data/peaks4DT/APAPeaks_NucPeakto10perc_5peaks_fixedStrand.bed /project2/gilad/briana/threeprimeseq/data/peaks4DT/APAPAS_NucPeakto10perc_5peaks_fixedStrand.bed 

python Peak2PAS.py  /project2/gilad/briana/threeprimeseq/data/peaks4DT/APAPeaks_NucPeakto50perc_fixedStrand.bed /project2/gilad/briana/threeprimeseq/data/peaks4DT/APAPAS_NucPeakto50perc_fixedStrand.bed

Subset to 3’ utr

The UTR peaks are in: /project2/gilad/briana/threeprimeseq/data/mergedPeaks_noMP_GeneLoc_3UTR/Filtered_APApeaks_merged_allchrom_noMP.sort.named.noCHR_geneLocParsed_5perc_3UTR.bed

filterPAS_UTR.py

def main(filterFile, outfile):
  inBed=open("/project2/gilad/briana/threeprimeseq/data/mergedPeaks_noMP_GeneLoc_3UTR/Filtered_APApeaks_merged_allchrom_noMP.sort.named.noCHR_geneLocParsed_5perc_3UTR.bed", "r")
  outF=open(outfile, "w")
  filt=open(filterFile,"r")
  okDic={}
  for ln in inBed: 
    peak=ln.split()[3].split(":")[0]
    okDic[peak]=""
  for ln in filt: 
    peak=ln.split()[3].split(":")[0]
    if peak in okDic.keys():
        outF.write(ln)
  outF.close()    


if __name__ == "__main__":
    import sys
    filterFile=sys.argv[1]
    outfile=sys.argv[2]
    main(filterFile, outfile) 
python filterPAS_UTR.py /project2/gilad/briana/threeprimeseq/data/peaks4DT/APAPAS_NucPeakto10perc_5peaks_fixedStrand.bed /project2/gilad/briana/threeprimeseq/data/peaks4DT/APAPAS_NucPeakto10perc_5peaks_fixedStrand_UTR.bed

python filterPAS_UTR.py /project2/gilad/briana/threeprimeseq/data/peaks4DT/APAPAS_NucPeakto10perc_fixedStrand.bed /project2/gilad/briana/threeprimeseq/data/peaks4DT/APAPAS_NucPeakto10perc_fixedStrand_UTR.bed

python filterPAS_UTR.py /project2/gilad/briana/threeprimeseq/data/peaks4DT/APAPAS_NucPeakto50perc_fixedStrand.bed /project2/gilad/briana/threeprimeseq/data/peaks4DT/APAPAS_NucPeakto50perc_fixedStrand_UTR.bed

python filterPAS_UTR.py /project2/gilad/briana/threeprimeseq/data/peaks4DT/APAPAS_NucPeakTOP10perc_fixedStrand.bed  /project2/gilad/briana/threeprimeseq/data/peaks4DT/APAPAS_NucPeakTOP10perc_fixedStrand_UTR.bed

allDTPlots_topXPerc_UTR.sh

#!/bin/bash

#SBATCH --job-name=allDTPlots_topXPerc_UTR
#SBATCH --account=pi-yangili1
#SBATCH --time=36:00:00
#SBATCH --output=allDTPlots_topXPerc_UTR.out
#SBATCH --error=allDTPlots_topXPerc_UTR.err
#SBATCH --partition=broadwl
#SBATCH --mem=36G
#SBATCH --mail-type=END

module load Anaconda3
source activate three-prime-env

###50 perc 
computeMatrix reference-point -S /project2/gilad/briana/threeprimeseq/data/mergedBW/Total_MergedBamCoverage.bw /project2/gilad/briana/threeprimeseq/data/mergedBW/Nuclear_MergedBamCoverage.bw -R /project2/gilad/briana/threeprimeseq/data/peaks4DT/APAPAS_NucPeakto50perc_fixedStrand_UTR.bed -b 50 -a 50   -out /project2/gilad/briana/threeprimeseq/data/DT_up2Xperc/BothFrac_nuc50percUTR_Nompfilt.gz

plotHeatmap --sortRegions descend -m /project2/gilad/briana/threeprimeseq/data/DT_up2Xperc/BothFrac_nuc50percUTR_Nompfilt.gz --refPointLabel "PAS" --plotTitle "Combined Reads at PAS up to 50%" --heatmapHeight 7 --colorMap YlGnBu --averageTypeSummaryPlot "median"  -out /project2/gilad/briana/threeprimeseq/data/DT_up2Xperc/BothFrac_nuc50percUTR_Nompfilt.png

computeMatrix reference-point -S /project2/gilad/briana/threeprimeseq/data/rnaseq_bw/RNAseqGeuvadis_STAR_6samp_MergedBams.sort.bw -R /project2/gilad/briana/threeprimeseq/data/peaks4DT/APAPAS_NucPeakto50perc_fixedStrand_UTR.bed -b 50 -a 50  -out /project2/gilad/briana/threeprimeseq/data/DT_up2Xperc/RNA_nuc50percUTR_Nompfilt.gz

plotHeatmap --sortRegions descend -m /project2/gilad/briana/threeprimeseq/data/DT_up2Xperc/RNA_nuc50percUTR_Nompfilt.gz --refPointLabel "PAS" --plotTitle "RNA seq at PAS up to 50%" --heatmapHeight 7 --colorMap YlGnBu --averageTypeSummaryPlot "median" -out /project2/gilad/briana/threeprimeseq/data/DT_up2Xperc/RNA_nuc50percUTR_Nompfilt.png

##to 10perc
computeMatrix reference-point -S /project2/gilad/briana/threeprimeseq/data/mergedBW/Total_MergedBamCoverage.bw /project2/gilad/briana/threeprimeseq/data/mergedBW/Nuclear_MergedBamCoverage.bw -R /project2/gilad/briana/threeprimeseq/data/peaks4DT/APAPAS_NucPeakto10perc_fixedStrand_UTR.bed -b 50 -a 50  -out /project2/gilad/briana/threeprimeseq/data/DT_up2Xperc/BothFrac_nuc10percUTR_Nompfilt.gz

plotHeatmap --sortRegions descend -m /project2/gilad/briana/threeprimeseq/data/DT_up2Xperc/BothFrac_nuc10percUTR_Nompfilt.gz --refPointLabel "PAS" --plotTitle "Combined Reads at PAS up to 10%" --heatmapHeight 7 --colorMap YlGnBu --averageTypeSummaryPlot "median" --averageTypeSummaryPlot "median" -out /project2/gilad/briana/threeprimeseq/data/DT_up2Xperc/BothFrac_nuc10percUTR_Nompfilt.png

computeMatrix reference-point -S /project2/gilad/briana/threeprimeseq/data/rnaseq_bw/RNAseqGeuvadis_STAR_6samp_MergedBams.sort.bw -R /project2/gilad/briana/threeprimeseq/data/peaks4DT/APAPAS_NucPeakto10perc_fixedStrand_UTR.bed -b 50 -a 50   -out /project2/gilad/briana/threeprimeseq/data/DT_up2Xperc/RNA_nuc10percUTR_Nompfilt.gz

plotHeatmap --sortRegions descend -m /project2/gilad/briana/threeprimeseq/data/DT_up2Xperc/RNA_nuc10percUTR_Nompfilt.gz --refPointLabel "PAS" --plotTitle "RNA seq at PAS up to 10%" --heatmapHeight 7 --colorMap YlGnBu --averageTypeSummaryPlot "median" -out /project2/gilad/briana/threeprimeseq/data/DT_up2Xperc/RNA_nuc10percUTR_Nompfilt.png

##5 peaks 
computeMatrix reference-point -S /project2/gilad/briana/threeprimeseq/data/mergedBW/Total_MergedBamCoverage.bw /project2/gilad/briana/threeprimeseq/data/mergedBW/Nuclear_MergedBamCoverage.bw -R /project2/gilad/briana/threeprimeseq/data/peaks4DT/APAPAS_NucPeakto10perc_5peaks_fixedStrand_UTR.bed -b 50 -a 50 -out /project2/gilad/briana/threeprimeseq/data/DT_up2Xperc/BothFrac_nuc10perc5peaksUTR_Nompfilt.gz

plotHeatmap --sortRegions descend -m /project2/gilad/briana/threeprimeseq/data/DT_up2Xperc/BothFrac_nuc10perc5peaksUTR_Nompfilt.gz --refPointLabel "PAS" --plotTitle "Combined Reads at PAS up to 10%, 5 peaks" --heatmapHeight 7 --colorMap YlGnBu --averageTypeSummaryPlot "median" -out /project2/gilad/briana/threeprimeseq/data/DT_up2Xperc/BothFrac_nuc10perc5peaksUTR_Nompfilt.png

computeMatrix reference-point -S /project2/gilad/briana/threeprimeseq/data/rnaseq_bw/RNAseqGeuvadis_STAR_6samp_MergedBams.sort.bw -R /project2/gilad/briana/threeprimeseq/data/peaks4DT/APAPAS_NucPeakto10perc_5peaks_fixedStrand_UTR.bed -b 50 -a 50  -out /project2/gilad/briana/threeprimeseq/data/DT_up2Xperc/RNA_nuc10perc5peaksUTR_Nompfilt.gz

plotHeatmap --sortRegions descend -m /project2/gilad/briana/threeprimeseq/data/DT_up2Xperc/RNA_nuc10perc5peaksUTR_Nompfilt.gz --refPointLabel "PAS" --plotTitle "RNA seq at PAS up to 10%, 5 peaks" --heatmapHeight 7 --colorMap YlGnBu --averageTypeSummaryPlot "median" -out /project2/gilad/briana/threeprimeseq/data/DT_up2Xperc/RNA_nuc10perc5peaksUTR_Nompfilt.png

##TOP10

computeMatrix reference-point -S /project2/gilad/briana/threeprimeseq/data/mergedBW/Total_MergedBamCoverage.bw /project2/gilad/briana/threeprimeseq/data/mergedBW/Nuclear_MergedBamCoverage.bw -R /project2/gilad/briana/threeprimeseq/data/peaks4DT/APAPAS_NucPeakTOP10perc_fixedStrand_UTR.bed -b 50 -a 50  -out /project2/gilad/briana/threeprimeseq/data/DT_up2Xperc/BothFrac_nuctop10percUTR_Nompfilt.gz

plotHeatmap --sortRegions descend -m /project2/gilad/briana/threeprimeseq/data/DT_up2Xperc/BothFrac_nuctop10percUTR_Nompfilt.gz --refPointLabel "PAS" --plotTitle "Combined Reads at PAS top 10%" --heatmapHeight 7 --colorMap YlGnBu --averageTypeSummaryPlot "median" -out /project2/gilad/briana/threeprimeseq/data/DT_up2Xperc/BothFrac_nuctop10percUTR_Nompfilt.png

computeMatrix reference-point -S /project2/gilad/briana/threeprimeseq/data/rnaseq_bw/RNAseqGeuvadis_STAR_6samp_MergedBams.sort.bw -R /project2/gilad/briana/threeprimeseq/data/peaks4DT/APAPAS_NucPeakTOP10perc_fixedStrand_UTR.bed -b 50 -a 50  -out /project2/gilad/briana/threeprimeseq/data/DT_up2Xperc/RNA_nuctop10percUTR_Nompfilt.gz

plotHeatmap --sortRegions descend -m /project2/gilad/briana/threeprimeseq/data/DT_up2Xperc/RNA_nuctop10percUTR_Nompfilt.gz --refPointLabel "PAS" --plotTitle "RNA seq at PAS top 10%" --heatmapHeight 7 --colorMap YlGnBu --averageTypeSummaryPlot "median" -out /project2/gilad/briana/threeprimeseq/data/DT_up2Xperc/RNA_nuctop10percUTR_Nompfilt.png

allDTPlots_topXPerc.sh

#!/bin/bash

#SBATCH --job-name=allDTPlots_topXPerc
#SBATCH --account=pi-yangili1
#SBATCH --time=36:00:00
#SBATCH --output=allDTPlots_topXPerc.out
#SBATCH --error=allDTPlots_topXPerc.err
#SBATCH --partition=broadwl
#SBATCH --mem=36G
#SBATCH --mail-type=END

module load Anaconda3
source activate three-prime-env


##50%
computeMatrix reference-point -S /project2/gilad/briana/threeprimeseq/data/mergedBW/Total_MergedBamCoverage.bw /project2/gilad/briana/threeprimeseq/data/mergedBW/Nuclear_MergedBamCoverage.bw -R /project2/gilad/briana/threeprimeseq/data/peaks4DT/APAPAS_NucPeakto50perc_fixedStrand.bed -b 50 -a 50   -out /project2/gilad/briana/threeprimeseq/data/DT_up2Xperc/BothFrac_nuc50perc_Nompfilt.gz

plotHeatmap --sortRegions descend -m /project2/gilad/briana/threeprimeseq/data/DT_up2Xperc/BothFrac_nuc50perc_Nompfilt.gz --refPointLabel "PAS" --plotTitle "Combined Reads at PAS up to 50%" --heatmapHeight 7 --colorMap YlGnBu --averageTypeSummaryPlot "median" -out /project2/gilad/briana/threeprimeseq/data/DT_up2Xperc/BothFrac_nuc50perc_Nompfilt.png

computeMatrix reference-point -S /project2/gilad/briana/threeprimeseq/data/rnaseq_bw/RNAseqGeuvadis_STAR_6samp_MergedBams.sort.bw -R /project2/gilad/briana/threeprimeseq/data/peaks4DT/APAPAS_NucPeakto50perc_fixedStrand.bed -b 50 -a 50  -out /project2/gilad/briana/threeprimeseq/data/DT_up2Xperc/RNA_nuc50perc_Nompfilt.gz

plotHeatmap --sortRegions descend -m /project2/gilad/briana/threeprimeseq/data/DT_up2Xperc/RNA_nuc50perc_Nompfilt.gz --refPointLabel "PAS" --plotTitle "RNA seq at PAS up to 50%" --heatmapHeight 7 --colorMap YlGnBu --averageTypeSummaryPlot "median" -out /project2/gilad/briana/threeprimeseq/data/DT_up2Xperc/RNA_nuc50perc_Nompfilt.png


#10%  

computeMatrix reference-point -S /project2/gilad/briana/threeprimeseq/data/mergedBW/Total_MergedBamCoverage.bw /project2/gilad/briana/threeprimeseq/data/mergedBW/Nuclear_MergedBamCoverage.bw -R /project2/gilad/briana/threeprimeseq/data/peaks4DT/APAPAS_NucPeakto10perc_fixedStrand.bed -b 50 -a 50  -out /project2/gilad/briana/threeprimeseq/data/DT_up2Xperc/BothFrac_nuc10perc_Nompfilt.gz

plotHeatmap --sortRegions descend -m /project2/gilad/briana/threeprimeseq/data/DT_up2Xperc/BothFrac_nuc10perc_Nompfilt.gz --refPointLabel "PAS" --plotTitle "Combined Reads at PAS up to 10%" --heatmapHeight 7 --colorMap YlGnBu --averageTypeSummaryPlot "median" -out /project2/gilad/briana/threeprimeseq/data/DT_up2Xperc/BothFrac_nuc10perc_Nompfilt.png

computeMatrix reference-point -S /project2/gilad/briana/threeprimeseq/data/rnaseq_bw/RNAseqGeuvadis_STAR_6samp_MergedBams.sort.bw -R /project2/gilad/briana/threeprimeseq/data/peaks4DT/APAPAS_NucPeakto10perc_fixedStrand.bed -b 50 -a 50 -out /project2/gilad/briana/threeprimeseq/data/DT_up2Xperc/RNA_nuc10perc_Nompfilt.gz

plotHeatmap --sortRegions descend -m /project2/gilad/briana/threeprimeseq/data/DT_up2Xperc/RNA_nuc10perc_Nompfilt.gz --refPointLabel "PAS" --plotTitle "RNA seq at PAS up to 10%" --heatmapHeight 7 --colorMap YlGnBu --averageTypeSummaryPlot "median" -out /project2/gilad/briana/threeprimeseq/data/DT_up2Xperc/RNA_nuc10perc_Nompfilt.png

#top 10 
computeMatrix reference-point -S /project2/gilad/briana/threeprimeseq/data/mergedBW/Total_MergedBamCoverage.bw /project2/gilad/briana/threeprimeseq/data/mergedBW/Nuclear_MergedBamCoverage.bw -R /project2/gilad/briana/threeprimeseq/data/peaks4DT/APAPAS_NucPeakTOP10perc_fixedStrand.bed -b 50 -a 50  -out /project2/gilad/briana/threeprimeseq/data/DT_up2Xperc/BothFrac_nucTop10perc_Nompfilt.gz

plotHeatmap --sortRegions descend -m /project2/gilad/briana/threeprimeseq/data/DT_up2Xperc/BothFrac_nucTop10perc_Nompfilt.gz --refPointLabel "PAS" --plotTitle "Combined Reads at PAS up to 10%" --heatmapHeight 7 --colorMap YlGnBu --averageTypeSummaryPlot "median" -out /project2/gilad/briana/threeprimeseq/data/DT_up2Xperc/BothFrac_nucTop10perc_Nompfilt.png

computeMatrix reference-point -S /project2/gilad/briana/threeprimeseq/data/rnaseq_bw/RNAseqGeuvadis_STAR_6samp_MergedBams.sort.bw -R /project2/gilad/briana/threeprimeseq/data/peaks4DT/APAPAS_NucPeakTOP10perc_fixedStrand.bed -b 50 -a 50  -out /project2/gilad/briana/threeprimeseq/data/DT_up2Xperc/RNA_nucTop10perc_Nompfilt.gz

plotHeatmap --sortRegions descend -m /project2/gilad/briana/threeprimeseq/data/DT_up2Xperc/RNA_nucTop10perc_Nompfilt.gz --refPointLabel "PAS" --plotTitle "RNA seq at PAS up to 10%" --heatmapHeight 7 --colorMap YlGnBu --averageTypeSummaryPlot "median" -out /project2/gilad/briana/threeprimeseq/data/DT_up2Xperc/RNA_nucTop10perc_Nompfilt.png


#5 peaks  

computeMatrix reference-point -S /project2/gilad/briana/threeprimeseq/data/mergedBW/Total_MergedBamCoverage.bw /project2/gilad/briana/threeprimeseq/data/mergedBW/Nuclear_MergedBamCoverage.bw -R /project2/gilad/briana/threeprimeseq/data/peaks4DT/APAPAS_NucPeakto10perc_5peaks_fixedStrand.bed -b 50 -a 50  -out /project2/gilad/briana/threeprimeseq/data/DT_up2Xperc/BothFrac_nuc10perc5peaks_Nompfilt.gz

plotHeatmap --sortRegions descend -m /project2/gilad/briana/threeprimeseq/data/DT_up2Xperc/BothFrac_nuc10perc5peaks_Nompfilt.gz --refPointLabel "PAS" --plotTitle "Combined Reads at PAS up to 10%, 5 peaks" --heatmapHeight 7 --colorMap YlGnBu --averageTypeSummaryPlot "median" -out /project2/gilad/briana/threeprimeseq/data/DT_up2Xperc/BothFrac_nucTop10perc5peaks_Nompfilt.png

computeMatrix reference-point -S /project2/gilad/briana/threeprimeseq/data/rnaseq_bw/RNAseqGeuvadis_STAR_6samp_MergedBams.sort.bw -R /project2/gilad/briana/threeprimeseq/data/peaks4DT/APAPAS_NucPeakto10perc_5peaks_fixedStrand.bed -b 50 -a 50  -out /project2/gilad/briana/threeprimeseq/data/DT_up2Xperc/RNA_nuc10perc5peaks_Nompfilt.gz

plotHeatmap --sortRegions descend -m /project2/gilad/briana/threeprimeseq/data/DT_up2Xperc/RNA_nuc10perc5peaks_Nompfilt.gz --refPointLabel "PAS" --plotTitle "RNA seq at PAS up to 10%, 5 peaks" --heatmapHeight 7 --colorMap YlGnBu --averageTypeSummaryPlot "median" -out /project2/gilad/briana/threeprimeseq/data/DT_up2Xperc/RNA_nuc10perc5peaks_Nompfilt.png




sessionInfo()
R version 3.5.1 (2018-07-02)
Platform: x86_64-apple-darwin15.6.0 (64-bit)
Running under: macOS  10.14.1

Matrix products: default
BLAS: /Library/Frameworks/R.framework/Versions/3.5/Resources/lib/libRblas.0.dylib
LAPACK: /Library/Frameworks/R.framework/Versions/3.5/Resources/lib/libRlapack.dylib

locale:
[1] en_US.UTF-8/en_US.UTF-8/en_US.UTF-8/C/en_US.UTF-8/en_US.UTF-8

attached base packages:
[1] stats     graphics  grDevices utils     datasets  methods   base     

other attached packages:
 [1] cowplot_0.9.4   reshape2_1.4.3  forcats_0.4.0   stringr_1.4.0  
 [5] dplyr_0.8.0.1   purrr_0.3.1     readr_1.3.1     tidyr_0.8.3    
 [9] tibble_2.0.1    ggplot2_3.1.0   tidyverse_1.2.1 workflowr_1.2.0

loaded via a namespace (and not attached):
 [1] Rcpp_1.0.0       cellranger_1.1.0 plyr_1.8.4       pillar_1.3.1    
 [5] compiler_3.5.1   git2r_0.24.0     tools_3.5.1      digest_0.6.18   
 [9] lubridate_1.7.4  jsonlite_1.6     evaluate_0.13    nlme_3.1-137    
[13] gtable_0.2.0     lattice_0.20-38  pkgconfig_2.0.2  rlang_0.3.1     
[17] cli_1.0.1        rstudioapi_0.9.0 yaml_2.2.0       haven_2.1.0     
[21] xfun_0.5         withr_2.1.2      xml2_1.2.0       httr_1.4.0      
[25] knitr_1.21       hms_0.4.2        generics_0.0.2   fs_1.2.6        
[29] rprojroot_1.3-2  grid_3.5.1       tidyselect_0.2.5 glue_1.3.0      
[33] R6_2.4.0         readxl_1.3.0     rmarkdown_1.11   modelr_0.1.4    
[37] magrittr_1.5     whisker_0.3-2    backports_1.1.3  scales_1.0.0    
[41] htmltools_0.3.6  rvest_0.3.2      assertthat_0.2.0 colorspace_1.4-0
[45] stringi_1.3.1    lazyeval_0.2.1   munsell_0.5.0    broom_0.5.1     
[49] crayon_1.3.4