Last updated: 2019-02-19

Checks: 6 0

Knit directory: threeprimeseq/analysis/

This reproducible R Markdown analysis was created with workflowr (version 1.2.0). The Report tab describes the reproducibility checks that were applied when the results were created. The Past versions tab lists the development history.


Great! Since the R Markdown file has been committed to the Git repository, you know the exact version of the code that produced these results.

Great job! The global environment was empty. Objects defined in the global environment can affect the analysis in your R Markdown file in unknown ways. For reproduciblity it’s best to always run the code in an empty environment.

The command set.seed(12345) was run prior to running the code in the R Markdown file. Setting a seed ensures that any results that rely on randomness, e.g. subsampling or permutations, are reproducible.

Great job! Recording the operating system, R version, and package versions is critical for reproducibility.

Nice! There were no cached chunks for this analysis, so you can be confident that you successfully produced the results during this run.

Great! You are using Git for version control. Tracking code development and connecting the code version to the results is critical for reproducibility. The version displayed above was the version of the Git repository at the time these results were generated.

Note that you need to be careful to ensure that all relevant files for the analysis have been committed to Git prior to generating the results (you can use wflow_publish or wflow_git_commit). workflowr only checks the R Markdown file, but you know if there are other scripts or data files that it depends on. Below is the status of the Git repository when the results were generated:


Ignored files:
    Ignored:    .DS_Store
    Ignored:    .Rhistory
    Ignored:    .Rproj.user/
    Ignored:    data/.DS_Store
    Ignored:    data/perm_QTL_trans_noMP_5percov/
    Ignored:    output/.DS_Store

Untracked files:
    Untracked:  KalistoAbundance18486.txt
    Untracked:  analysis/4suDataIGV.Rmd
    Untracked:  analysis/DirectionapaQTL.Rmd
    Untracked:  analysis/EvaleQTLs.Rmd
    Untracked:  analysis/YL_QTL_test.Rmd
    Untracked:  analysis/ncbiRefSeq_sm.sort.mRNA.bed
    Untracked:  analysis/snake.config.notes.Rmd
    Untracked:  analysis/verifyBAM.Rmd
    Untracked:  analysis/verifybam_dubs.Rmd
    Untracked:  code/PeaksToCoverPerReads.py
    Untracked:  code/strober_pc_pve_heatmap_func.R
    Untracked:  data/18486.genecov.txt
    Untracked:  data/APApeaksYL.total.inbrain.bed
    Untracked:  data/AllPeak_counts/
    Untracked:  data/ApaQTLs/
    Untracked:  data/ApaQTLs_otherPhen/
    Untracked:  data/ChromHmmOverlap/
    Untracked:  data/DistTXN2Peak_genelocAnno/
    Untracked:  data/GM12878.chromHMM.bed
    Untracked:  data/GM12878.chromHMM.txt
    Untracked:  data/LianoglouLCL/
    Untracked:  data/LocusZoom/
    Untracked:  data/LocusZoom_proc/
    Untracked:  data/NuclearApaQTLs.txt
    Untracked:  data/PeakCounts/
    Untracked:  data/PeakCounts_noMP_5perc/
    Untracked:  data/PeakCounts_noMP_genelocanno/
    Untracked:  data/PeakUsage/
    Untracked:  data/PeakUsage_noMP/
    Untracked:  data/PeakUsage_noMP_GeneLocAnno/
    Untracked:  data/PeaksUsed/
    Untracked:  data/PeaksUsed_noMP_5percCov/
    Untracked:  data/QTL_overlap/
    Untracked:  data/RNAkalisto/
    Untracked:  data/RefSeq_annotations/
    Untracked:  data/TotalApaQTLs.txt
    Untracked:  data/Totalpeaks_filtered_clean.bed
    Untracked:  data/UnderstandPeaksQC/
    Untracked:  data/WASP_STAT/
    Untracked:  data/YL-SP-18486-T-combined-genecov.txt
    Untracked:  data/YL-SP-18486-T_S9_R1_001-genecov.txt
    Untracked:  data/YL_QTL_test/
    Untracked:  data/apaExamp/
    Untracked:  data/apaExamp_proc/
    Untracked:  data/apaQTL_examp_noMP/
    Untracked:  data/bedgraph_peaks/
    Untracked:  data/bin200.5.T.nuccov.bed
    Untracked:  data/bin200.Anuccov.bed
    Untracked:  data/bin200.nuccov.bed
    Untracked:  data/clean_peaks/
    Untracked:  data/comb_map_stats.csv
    Untracked:  data/comb_map_stats.xlsx
    Untracked:  data/comb_map_stats_39ind.csv
    Untracked:  data/combined_reads_mapped_three_prime_seq.csv
    Untracked:  data/diff_iso_GeneLocAnno/
    Untracked:  data/diff_iso_proc/
    Untracked:  data/diff_iso_trans/
    Untracked:  data/ensemble_to_genename.txt
    Untracked:  data/example_gene_peakQuant/
    Untracked:  data/explainProtVar/
    Untracked:  data/filtPeakOppstrand_cov_noMP_GeneLocAnno_5perc/
    Untracked:  data/filtered_APApeaks_merged_allchrom_refseqTrans.closest2End.bed
    Untracked:  data/filtered_APApeaks_merged_allchrom_refseqTrans.closest2End.noties.bed
    Untracked:  data/first50lines_closest.txt
    Untracked:  data/gencov.test.csv
    Untracked:  data/gencov.test.txt
    Untracked:  data/gencov_zero.test.csv
    Untracked:  data/gencov_zero.test.txt
    Untracked:  data/gene_cov/
    Untracked:  data/joined
    Untracked:  data/leafcutter/
    Untracked:  data/merged_combined_YL-SP-threeprimeseq.bg
    Untracked:  data/molPheno_noMP/
    Untracked:  data/mol_overlap/
    Untracked:  data/mol_pheno/
    Untracked:  data/nom_QTL/
    Untracked:  data/nom_QTL_opp/
    Untracked:  data/nom_QTL_trans/
    Untracked:  data/nuc6up/
    Untracked:  data/nuc_10up/
    Untracked:  data/other_qtls/
    Untracked:  data/pQTL_otherphen/
    Untracked:  data/peakPerRefSeqGene/
    Untracked:  data/perm_QTL/
    Untracked:  data/perm_QTL_GeneLocAnno_noMP_5percov/
    Untracked:  data/perm_QTL_GeneLocAnno_noMP_5percov_3UTR/
    Untracked:  data/perm_QTL_diffWindow/
    Untracked:  data/perm_QTL_opp/
    Untracked:  data/perm_QTL_trans/
    Untracked:  data/perm_QTL_trans_filt/
    Untracked:  data/protAndAPAAndExplmRes.Rda
    Untracked:  data/protAndAPAlmRes.Rda
    Untracked:  data/protAndExpressionlmRes.Rda
    Untracked:  data/reads_mapped_three_prime_seq.csv
    Untracked:  data/smash.cov.results.bed
    Untracked:  data/smash.cov.results.csv
    Untracked:  data/smash.cov.results.txt
    Untracked:  data/smash_testregion/
    Untracked:  data/ssFC200.cov.bed
    Untracked:  data/temp.file1
    Untracked:  data/temp.file2
    Untracked:  data/temp.gencov.test.txt
    Untracked:  data/temp.gencov_zero.test.txt
    Untracked:  data/threePrimeSeqMetaData.csv
    Untracked:  data/threePrimeSeqMetaData55Ind.txt
    Untracked:  data/threePrimeSeqMetaData55Ind.xlsx
    Untracked:  data/threePrimeSeqMetaData55Ind_noDup.txt
    Untracked:  data/threePrimeSeqMetaData55Ind_noDup.xlsx
    Untracked:  data/threePrimeSeqMetaData55Ind_noDup_WASPMAP.txt
    Untracked:  data/threePrimeSeqMetaData55Ind_noDup_WASPMAP.xlsx
    Untracked:  output/deeptools_plots/
    Untracked:  output/picard/
    Untracked:  output/plots/
    Untracked:  output/qual.fig2.pdf

Unstaged changes:
    Modified:   analysis/28ind.peak.explore.Rmd
    Modified:   analysis/CompareLianoglouData.Rmd
    Modified:   analysis/NewPeakPostMP.Rmd
    Modified:   analysis/apaQTLoverlapGWAS.Rmd
    Modified:   analysis/cleanupdtseq.internalpriming.Rmd
    Modified:   analysis/coloc_apaQTLs_protQTLs.Rmd
    Modified:   analysis/dif.iso.usage.leafcutter.Rmd
    Modified:   analysis/diffIsoAnalysisNewMapping.Rmd
    Modified:   analysis/diff_iso_pipeline.Rmd
    Modified:   analysis/explainpQTLs.Rmd
    Modified:   analysis/explore.filters.Rmd
    Modified:   analysis/flash2mash.Rmd
    Modified:   analysis/mispriming_approach.Rmd
    Modified:   analysis/overlapMolQTL.Rmd
    Modified:   analysis/overlapMolQTL.opposite.Rmd
    Modified:   analysis/overlap_qtls.Rmd
    Modified:   analysis/peakOverlap_oppstrand.Rmd
    Modified:   analysis/peakQCPPlots.Rmd
    Modified:   analysis/pheno.leaf.comb.Rmd
    Modified:   analysis/pipeline_55Ind.Rmd
    Modified:   analysis/swarmPlots_QTLs.Rmd
    Modified:   analysis/test.max2.Rmd
    Modified:   analysis/test.smash.Rmd
    Modified:   analysis/understandPeaks.Rmd
    Modified:   code/Snakefile

Note that any generated files, e.g. HTML, png, CSS, etc., are not included in this status report because it is ok for generated content to have uncommitted changes.


These are the previous versions of the R Markdown and HTML files. If you’ve configured a remote Git repository (see ?wflow_git_remote), click on the hyperlinks in the table below to view them.

File Version Author Date Message
Rmd 9bc1a38 Briana Mittleman 2019-02-19 add eif2a lz
html a20b63c Briana Mittleman 2019-02-19 Build site.
Rmd bcce5df Briana Mittleman 2019-02-19 add examples
html ab45fe8 Briana Mittleman 2019-02-19 Build site.
Rmd 75085b4 Briana Mittleman 2019-02-19 add example plots
html 1dde5f9 Briana Mittleman 2019-02-19 Build site.
html 65b150e Briana Mittleman 2019-02-19 Build site.
Rmd a77fa79 Briana Mittleman 2019-02-19 add eQTL pval for overlap
html eea777a Briana Mittleman 2019-02-18 Build site.
Rmd 1b5032e Briana Mittleman 2019-02-18 add chromHMM analysus
html fe8c55b Briana Mittleman 2019-02-18 Build site.
Rmd 2d86d89 Briana Mittleman 2019-02-18 add pi1 anaysis
html beb0d71 Briana Mittleman 2019-02-18 Build site.
Rmd 3c1f049 Briana Mittleman 2019-02-18 add gwas overlap

library(workflowr)
This is workflowr version 1.2.0
Run ?workflowr for help getting started
library(tidyverse)
── Attaching packages ──────────────────────────────────────────────────────────────────────────── tidyverse 1.2.1 ──
✔ ggplot2 3.0.0     ✔ purrr   0.2.5
✔ tibble  1.4.2     ✔ dplyr   0.7.6
✔ tidyr   0.8.1     ✔ stringr 1.4.0
✔ readr   1.1.1     ✔ forcats 0.3.0
Warning: package 'stringr' was built under R version 3.5.2
── Conflicts ─────────────────────────────────────────────────────────────────────────────── tidyverse_conflicts() ──
✖ dplyr::filter() masks stats::filter()
✖ dplyr::lag()    masks stats::lag()
library(qvalue)
library(reshape2)

Attaching package: 'reshape2'
The following object is masked from 'package:tidyr':

    smiths
library(cowplot)

Attaching package: 'cowplot'
The following object is masked from 'package:ggplot2':

    ggsave

In this analysis I will look at the apaQTLs to draw biological insight. To do this I will run the following analysis:

  • Look at chromatin regions for QTLs (chromHMM)

  • Overlap apaQTLs between fractions

  • Overlap apaQTLs with GWAS

  • QTL examples

Chromatin regions for QTLs

This will start with the sig QTL bed files:

  • /project2/gilad/briana/threeprimeseq/data/ApaQTLs/Nuclear.apaQTLs.sort.bed

  • /project2/gilad/briana/threeprimeseq/data/ApaQTLs/Total.apaQTLs.sort.bed

Creare a python script using pybedtools:

ChromHMM.QTLs.py


import pybedtools 

sigNuc=pybedtools.BedTool('/project2/gilad/briana/threeprimeseq/data/ApaQTLs/Nuclear.apaQTLs.sort.bed') 

sigTot=pybedtools.BedTool('/project2/gilad/briana/threeprimeseq/data/ApaQTLs/Total.apaQTLs.sort.bed')

hmm=pybedtools.BedTool("/project2/gilad/briana/genome_anotation_data/GM12878.chromHMM.sort.bed")

#map hmm to snps  
Tot_overlapHMM=sigTot.map(hmm, c=4)

Nuc_overlapHMM=sigNuc.map(hmm,c=4)

#save results  

Tot_overlapHMM.saveas("/project2/gilad/briana/threeprimeseq/data/ApaQTLs/Tot_overlapHMM.bed")

Nuc_overlapHMM.saveas("/project2/gilad/briana/threeprimeseq/data/ApaQTLs/Nuc_overlapHMM.bed")

Run in three-prime-env

chromHmm=read.table("../data/ChromHmmOverlap/chromHMM_regions.txt", col.names = c("number", "name"), stringsAsFactors = F)
TotalOverlapHMM=read.table("../data/ApaQTLs/Tot_overlapHMM.bed", col.names=c("chrom", "start", "end", "pid", "significance", "strand", "number"))
TotalOverlapHMM_names=TotalOverlapHMM %>% left_join(chromHmm, by="number")

NuclearOverlapHMM=read.table("../data/ApaQTLs/Nuc_overlapHMM.bed", col.names=c("chrom", "start", "end", "pid", "significance", "strand", "number"))
NuclearOverlapHMM_names=NuclearOverlapHMM %>% left_join(chromHmm, by="number")


ggplot(TotalOverlapHMM_names, aes(x=name)) + geom_bar() + labs(title="ChromHMM labels for Total APAQtls" , y="Number of SNPs", x="Region")+theme(axis.text.x = element_text(angle = 90, hjust = 1))

Version Author Date
ab45fe8 Briana Mittleman 2019-02-19
eea777a Briana Mittleman 2019-02-18
ggplot(NuclearOverlapHMM_names, aes(x=name)) + geom_bar() + labs(title="ChromHMM labels for Nuclear APAQtls" , y="Number of SNPs", x="Region")+theme(axis.text.x = element_text(angle = 90, hjust = 1))

Version Author Date
ab45fe8 Briana Mittleman 2019-02-19
eea777a Briana Mittleman 2019-02-18

Group them to put on plot together

NuclearOverlapHMM_names_byname= NuclearOverlapHMM_names %>% group_by(name) %>% summarise(Nuclear=n())
TotalOverlapHMM_names_byname= TotalOverlapHMM_names %>% group_by(name) %>% summarise(Total=n())


bothFracHMM= TotalOverlapHMM_names_byname %>% full_join(NuclearOverlapHMM_names_byname, by="name")
bothFracHMM$Nuclear= bothFracHMM$Nuclear %>% replace_na(0)

melt and plot

bothFracHMM_melt= melt(bothFracHMM,id.vars="name")
colnames(bothFracHMM_melt)=c("Region", "Fraction", "NQTLs")

apaQTLsChromregion=ggplot(bothFracHMM_melt, aes(x=Region, y=NQTLs, by=Fraction, fill=Fraction)) + geom_bar(stat="identity", position = "dodge")+ theme(axis.text.x = element_text(angle = 90, hjust = 1)) +scale_fill_manual(values=c("darkviolet","deepskyblue3"))  + labs(title="apaQTLs by chromatin region")
apaQTLsChromregion

Version Author Date
ab45fe8 Briana Mittleman 2019-02-19
eea777a Briana Mittleman 2019-02-18
ggsave(apaQTLsChromregion, file="../output/plots/apaQTLsbyChromHMM.png", width = 7, height = 5)
bothFracHMM_prop= bothFracHMM %>% mutate(Total_prop=Total/291) %>% mutate(Nuclear_prop=Nuclear/615) %>% select(-Total,-Nuclear) 

bothFracHMM_prop_melt= melt(bothFracHMM_prop,id.vars="name")
colnames(bothFracHMM_prop_melt)=c("Region", "Fraction", "PropQTLs")


propapaQTLsChromregion=ggplot(bothFracHMM_prop_melt, aes(x=Region, y=PropQTLs, by=Fraction, fill=Fraction)) + geom_bar(stat="identity", position = "dodge")+ theme(axis.text.x = element_text(angle = 90, hjust = 1)) +scale_fill_manual(values=c("darkviolet","deepskyblue3"))  + labs(y="Proportion of apaQTLs", title="Proportion of apaQTLs by chromatin region")
propapaQTLsChromregion

Version Author Date
ab45fe8 Briana Mittleman 2019-02-19
eea777a Briana Mittleman 2019-02-18
ggsave(propapaQTLsChromregion, file="../output/plots/proportionapaQTLsbyChromHMM.png", width = 7, height = 5)

I will need to get matched snps to look for enrichment in these values.

Overlap apaQTLs between fractions.

Goal: Find the nominal pvalue for the significant snp peak pair in oposite fraction. I can make a dictionary with the total and nuclear QTLs then run through the nominal files to get the pvalues:

Start with apa QTLs:

  • /project2/gilad/briana/threeprimeseq/data/ApaQTLs/Nuclear.apaQTLs.sort.bed

  • /project2/gilad/briana/threeprimeseq/data/ApaQTLs/Total.apaQTLs.sort.bed

NomResFromOppFrac.py



nucQTLs="/project2/gilad/briana/threeprimeseq/data/ApaQTLs/Nuclear.apaQTLs.sort.bed"  
totQTLs="/project2/gilad/briana/threeprimeseq/data/ApaQTLs/Total.apaQTLs.sort.bed"  

nucNom="/project2/gilad/briana/threeprimeseq/data/nominal_APAqtl_GeneLocAnno_noMP_5percUs/filtered_APApeaks_merged_allchrom_refseqGenes.GeneLocAnno_NoMP_sm_quant.Nuclear.fixed.pheno_5perc.fc.gz.qqnorm_allNomRes.txt"
totNom="/project2/gilad/briana/threeprimeseq/data/nominal_APAqtl_GeneLocAnno_noMP_5percUs/filtered_APApeaks_merged_allchrom_refseqGenes.GeneLocAnno_NoMP_sm_quant.Total.fixed.pheno_5perc.fc.gz.qqnorm_allNomRes.txt"

outnuc="/project2/gilad/briana/threeprimeseq/data/QTL_Overlap/TotQTLs_inNucFractionRes.txt"
outtot="/project2/gilad/briana/threeprimeseq/data/QTL_Overlap/NucQTLs_inTotFractionRes.txt"


def oppFract(inRes, inQTL, out):
    fout=open(out, "w")
    qtl_dic={}
    #SNP is key, peak is value
    for ln in open(inQTL,"r"):
        snp=ln.split()[2]
        chrom=ln.split()[0]
        peak=ln.split()[3].split(":")[0]
        qtl=str(chrom) + ":" + str(snp)
        if qtl not in qtl_dic.keys():
            qtl_dic[qtl]=[peak]
        else: 
            qtl_dic[qtl].append(peak)
    #print(qtl_dic)
    for ln in open(inRes, "r"):
        pval=ln.split()[3]
        snp=ln.split()[1]
        peak=ln.split()[0].split(":")[3].split("_")[-1]
        if snp in qtl_dic.keys():
            if peak in qtl_dic[snp]:
                fout.write("%s\t%s\t%s\n"%(snp, peak, pval))   
    fout.close()
    

oppFract(nucNom, totQTLs,outnuc)  
oppFract(totNom, nucQTLs, outtot)  
                

Run in bash: run_NomResFromOppFrac.sh

#!/bin/bash

#SBATCH --job-name=NomResFromOppFrac
#SBATCH --account=pi-yangili1
#SBATCH --time=36:00:00
#SBATCH --output=NomResFromOppFrac.out
#SBATCH --error=NomResFromOppFrac.err
#SBATCH --partition=broadwl
#SBATCH --mem=30G
#SBATCH --mail-type=END


module load Anaconda3
source activate three-prime-env


python NomResFromOppFrac.py
names=c("SNP", "peak", "pval")
NucQTLinTot=read.table("../data/QTL_overlap/NucQTLs_inTotFractionRes.txt", stringsAsFactors = F, col.names = names)
TotQTLinNuc=read.table("../data/QTL_overlap/TotQTLs_inNucFractionRes.txt", stringsAsFactors = F, col.names = names)

Get pi values:

qvalTot= pi0est(NucQTLinTot$pval, pi0.method = "bootstrap")
1-qvalTot$pi0
[1] 0.8424242
qvalNuc= pi0est(TotQTLinNuc$pval, pi0.method = "bootstrap")
1-qvalNuc$pi0
[1] 0.9197861

plots:

par(mfrow=c(1,2))
hist(NucQTLinTot$pval,xlab="Total apaQTL pvalue", main="Nuclear apaQTLs \nin Total Fraction")
text(.6,200, paste("pi_1=", round((1-qvalTot$pi0), digit=3), sep=" "))
hist(TotQTLinNuc$pval,xlab="Nuclear apaQTL pvalue", main="Total apaQTLs \nin Nuclear Fraction")
text(.6,125, paste("pi_1=", round((1-qvalNuc$pi0), digit=3), sep=" "))

Version Author Date
eea777a Briana Mittleman 2019-02-18
png("../output/plots/apaFractionOverlapPi1.png", width=1000, height = 500)
par(mfrow=c(1,2))
hist(NucQTLinTot$pval,xlab="Total apaQTL pvalue", main="Nuclear apaQTLs \nin Total Fraction")
text(.6,200, paste("pi_1=", round((1-qvalTot$pi0), digit=3), sep=" "))
hist(TotQTLinNuc$pval,xlab="Nuclear apaQTL pvalue", main="Total apaQTLs \nin Nuclear Fraction")
text(.6,125, paste("pi_1=", round((1-qvalNuc$pi0), digit=3), sep=" "))
dev.off()
quartz_off_screen 
                2 

This provides evidence for high degree of QTL sharing with increased sharing total to nuclear. This demonstrates to me that there are nuclear QTLs that do not persist in the total fraction. I will want to learn more about these.

Overlap with GWAS catelog

I did this analysis with the QTLs in the preprocessed 39 individual analysis. I will follow a similar pipeline here. I will find all of the snps in LD with the QTLs then test for these in the GWAS catelog. The pipeline I used to get the LD for all of the snp is shown here. The plink files are in /project2/gilad/briana/threeprimeseq/data/GWAS_overlap/. There are both map and ped files.

I can now adapt the subset_plink4QTLs.py file to take the current QTLs list. The file just has the QTLs with the chromosome and position. I can make this and put it in:

/project2/gilad/briana/threeprimeseq/data/GWAS_overlap_processed

The 50mb QTLs are in /project2/gilad/briana/threeprimeseq/data/ApaQTLs.

  • NuclearapaQTLs.GeneLocAnno.noMP.5perc.10FDR.txt
  • TotalapaQTLs.GeneLocAnno.noMP.5perc.10FDR.txt

The QTL snps are in the 6th column.

cut -f6 -d" " /project2/gilad/briana/threeprimeseq/data/ApaQTLs/NuclearapaQTLs.GeneLocAnno.noMP.5perc.10FDR.txt | uniq > /project2/gilad/briana/threeprimeseq/data/ApaQTLs/NuclearQTLs_uniq_50mb.txt
cut -f6 -d" "  /project2/gilad/briana/threeprimeseq/data/ApaQTLs/TotalapaQTLs.GeneLocAnno.noMP.5perc.10FDR.txt | uniq > /project2/gilad/briana/threeprimeseq/data/ApaQTLs/TotalQTLs_uniq_50mb.txt

I can convert these the the way they are in GEU snp files tony made (snp_num_pos)

QTLs2GeuSnps_proc.py

tot_in=open("/project2/gilad/briana/threeprimeseq/data/ApaQTLs/TotalQTLs_uniq_50mb.txt", "r")  
nuc_in=open("/project2/gilad/briana/threeprimeseq/data/ApaQTLs/NuclearQTLs_uniq_50mb.txt", "r")

tot_out=open("/project2/gilad/briana/threeprimeseq/data/ApaQTLs/TotalQTLs_uniq_50mb_GEU.txt", "w") 
nuc_out=open("/project2/gilad/briana/threeprimeseq/data/ApaQTLs/NuclearQTLs_uniq_50mb_GEU.txt", "w") 


def fix_file(fin, fout):
  for ln in fin:
    chrom, pos = ln.split(":")
    fout.write("snp_%s_%s"%(chrom,pos))
  fout.close()
  

fix_file(tot_in, tot_out)
fix_file(nuc_in, nuc_out)

subset_plink4QTLs_proc.py

def main(genFile, qtlFile, outFile):
  #convert snp file to a list: 
  def file_to_list(file):
    snp_list=[]
    for ln in file:
      snp=ln.strip()
      snp_list.append(snp)
    return(snp_list)

  gen=open(genFile,"r")
  fout=open(outFile, "w")
  qtls=open(qtlFile, "r")
  qtl_list=file_to_list(qtls)
  for ln in gen:
      snp=ln.split()[2]
      if snp in qtl_list:
          fout.write(ln)
  fout.close()
    

if __name__ == "__main__":
    import sys
    chrom=sys.argv[1]
    fraction=sys.argv[2]
    genFile = "/project2/gilad/briana/threeprimeseq/data/GWAS_overlap/geu_plinkYRI_LDchr%s.ld"%(chrom)
    outFile= "/project2/gilad/briana/threeprimeseq/data/GWAS_overlap_processed/%sApaQTL_LD/chr%s.%sQTL.LD.geno.ld"%(fraction,chrom,fraction)
    qtlFile= "/project2/gilad/briana/threeprimeseq/data/ApaQTLs/%sQTLs_uniq_50mb_GEU.txt"%(fraction)
    main(genFile, qtlFile, outFile) 

run_subset_plink4QTLs_proc.sh

#!/bin/bash

#SBATCH --job-name= run_subset_plink4QTLs_proc
#SBATCH --account=pi-yangili1
#SBATCH --time=36:00:00
#SBATCH --output=run_subset_plink4QTLs_proc.out
#SBATCH --error=run_subset_plink4QTLs_proc.err
#SBATCH --partition=broadwl
#SBATCH --mem=30G
#SBATCH --mail-type=END


module load Anaconda3
source activate three-prime-env


for i  in {1..22};
do
python subset_plink4QTLs_proc.py ${i} "Total"
done

for i  in {1..22};
do
python subset_plink4QTLs_proc.py ${i} "Nuclear"
done

This added 2446 total snps and 6258 nuclear snps.

Cat and remove indels:

cat chr* > allChr.TotalQTL.LD.gene.ld
grep -v indel allChr.TotalQTL.LD.gene.ld > allChr.TotalQTL.LD.gene.ld_noIndel

cat chr* > allChr.NuclearQTL.LD.gene.ld
grep -v indel allChr.NuclearQTL.LD.gene.ld > allChr.NuclearQTL.LD.gene.ld_noIndel

Make these bed files:

makeAlloverlapbed_proc.py


#load files:  

QTL_total=open("/project2/gilad/briana/threeprimeseq/data/ApaQTLs/TotalQTLs_uniq_50mb_GEU.txt", "r")
QTL_nuclear=open("/project2/gilad/briana/threeprimeseq/data/ApaQTLs/NuclearQTLs_uniq_50mb_GEU.txt", "r")
LD_total=open("/project2/gilad/briana/threeprimeseq/data/GWAS_overlap_processed/TotalApaQTL_LD/allChr.TotalQTL.LD.gene.ld_noIndel", "r")
LD_nuclear=open("/project2/gilad/briana/threeprimeseq/data/GWAS_overlap_processed/NuclearApaQTL_LD/allChr.NuclearQTL.LD.gene.ld_noIndel", "r")
outFile= open("/project2/gilad/briana/threeprimeseq/data/GWAS_overlap_processed/AllOverlapSnps.bed", "w")

#function for qtl to bed format
def qtl2bed(fqtl, fraction, fout=outFile):
    for ln in fqtl:
        snp, chrom, pos = ln.split("_")
        start=int(pos)-1
        end= int(pos)
        fout.write("%s\t%d\t%d\tQTL_%s\n"%(chrom, start, end,fraction))

#function for ld to bed format 
def ld2bed(fLD, fraction, fout=outFile):
    for ln in fLD:
        snpID=ln.split()[5]
        snp, chrom, pos= snpID.split("_")
        start=int(pos)-1
        end=int(pos)
        fout.write("%s\t%d\t%d\tLD_%s\n"%(chrom, start, end,fraction))


#I will run each of these for both fractions to get all of the snps in the out file. 


qtl2bed(QTL_nuclear, "Nuclear")
qtl2bed(QTL_total, "Total")
ld2bed(LD_nuclear, "Nuclear")
ld2bed(LD_total, "Total")


outFile.close()

Sort this:

sort -k1,1 -k2,2n /project2/gilad/briana/threeprimeseq/data/GWAS_overlap_processed/AllOverlapSnps.bed > /project2/gilad/briana/threeprimeseq/data/GWAS_overlap_processed/AllOverlapSnps.sort.bed

Overlap with GWAS

I can use the overlapSNPsGWAS.py file I created in the previous rendition of this analysis but run it with these files.

run_overlapSNPsGWAS_proc.sh

#!/bin/bash

#SBATCH --job-name=run_overlapSNPsGWAS_proc
#SBATCH --account=pi-yangili1
#SBATCH --time=5:00:00
#SBATCH --output=run_overlapSNPsGWAS_proc.out
#SBATCH --error=run_overlapSNPsGWAS_proc.err
#SBATCH --partition=broadwl
#SBATCH --mem=10G
#SBATCH --mail-type=END


module load Anaconda3
source activate three-prime-env

python overlapSNPsGWAS.py  "/project2/gilad/briana/threeprimeseq/data/GWAS_overlap_processed/AllOverlapSnps.sort.bed" "/project2/gilad/briana/threeprimeseq/data/GWAS_overlap_processed/AllSnps_GWASoverlapped.txt"

Total QTLs overlap: rs3117582 6:31620520

Total LD overlap:

  • rs2282301 1:155868625
  • rs3596 12:95696420
  • rs2277862 20:34152782
  • rs2517713 6:29918099

Nuclear QTL overlap:

rs7206971 17:45425115

Nucelar LD overlapL

  • rs10889353 1:63118196
  • rs2282301 1:155868625
  • rs10859871 12:95711876
  • rs10133111 14:103377321
  • rs17382723 2:242053546
  • rs2277862 20:34152782
  • rs2298428 22:21982892
  • rs13160562 5:96111371
  • rs29784 5:172595308
  • rs2517713 6:29918099
  • rs3077 6:33033022

Are these eQTLs?

Pull these snps from the eQTLs nominal pvalues:

Process the AllSnps_GWASoverlapped.txt file to have the RS id, the snp, and where it was found.

formatGWASOverlap.py

inFile="/project2/gilad/briana/threeprimeseq/data/GWAS_overlap_processed/AllSnps_GWASoverlapped.txt"

outFile=open("/project2/gilad/briana/threeprimeseq/data/GWAS_overlap_processed/AllSnps_GWASoverlapped_format.txt","w")

for i in open(inFile, "r"):
   chrom=i.split()[0]
   loc=i.split()[2]
   snp=chrom + ":" + loc
   found=i.split()[3]
   rs=i.split()[7].split(":")[0]
   outFile.write("%s\t%s\t%s\n"%(snp, rs, found))
outFile.close()

This is 14 uniq snps.

/project2/gilad/briana/threeprimeseq/data/molecular_QTLs/nom/fastqtl_qqnorm_RNAseq_phase2.fixed.nominal.out

I need to go throguh this file and check for the snps. I can do this by making a dictionary of the uniq snps in the overlap then testing the lines ib the nominal file. I want to keep the gene, snp, and pvalue for these associations
getexpPvalOverlap.py

overlapSnps="/project2/gilad/briana/threeprimeseq/data/GWAS_overlap_processed/AllSnps_GWASoverlapped_format.txt"
outF=open("/project2/gilad/briana/threeprimeseq/data/GWAS_overlap_processed/eQTL_pval_GWASOverlap.txt","w")  
nomRes="/project2/gilad/briana/threeprimeseq/data/molecular_QTLs/nom/fastqtl_qqnorm_RNAseq_phase2.fixed.nominal.out"  

snps_dic={}
for ln in open(overlapSnps, "r"):
    snp=ln.split()[0]
    if snp not in snps_dic.keys():
        snps_dic[snp]=""  

for ln in open(nomRes,"r"):
    snp=ln.split()[1]
    if snp in snps_dic.keys():
        gene=ln.split()[0].split(".")[0]
        pval=ln.split()[3]
        outF.write("%s\t%s\t%s\n"%(snp,gene,pval))
outF.close()

I can pull this in and get the lowest pval for each one

eQTLpvalOverlapGWAS=read.table("../data/ApaQTLs/eQTL_pval_GWASOverlap.txt", stringsAsFactors = F, col.names = c("snp", "gene", "pval"))
eQTLpvalOverlapGWAS_min= eQTLpvalOverlapGWAS %>% group_by(snp) %>% summarise(pvalM=min(pval)) %>% mutate(noSig=ifelse(pvalM<.05, "yes", "no"))

FIlter by the non sig ones to look at as exmaples:

eQTLpvalOverlapGWAS_NotSig= eQTLpvalOverlapGWAS_min %>% filter(noSig=="no")

eQTLpvalOverlapGWAS_NotSig
# A tibble: 5 x 3
  snp          pvalM noSig
  <chr>        <dbl> <chr>
1 1:63118196  0.400  no   
2 12:95696420 0.0813 no   
3 12:95711876 0.0813 no   
4 2:242053546 0.0878 no   
5 5:172595308 0.0530 no   

1:63118196 in LD with nuclear QTL (find which it is LD with )

grep snp_1_63118196 chr1.NuclearQTL.LD.geno.ld
#snp_1_63018852  
#r2 .91

12:95696420 LD with total QTL

grep snp_12_95696420 TotalApaQTL_LD/chr12.TotalQTL.LD.geno.ld
#snp_12_95672642
#r2 =1  

12:95711876 LD_Nuclear

grep snp_12_95711876 NuclearApaQTL_LD/chr12.NuclearQTL.LD.geno.ld
#snp_12_95688540
#r2 =1  

2:242053546 LD_Nuclear

grep snp_2_242053546 NuclearApaQTL_LD/chr2.NuclearQTL.LD.geno.ld
#snp_2_242018994
#r2 = .94  

5:172595308 LD Nuclear

grep snp_5_172595308 NuclearApaQTL_LD/chr5.NuclearQTL.LD.geno.ld
#snp_5_172580291
#r2 = .938    

Exampls plots:

In this analysis file I made boxplots for example QTLs. Here I can look at these.

1:63018852

First example 1:63018852 (nuclear QTL) DOCK7 peak5329 (2 GWAS hits for this snp and gene)

grep DOCK7 /project2/gilad/briana/genome_anotation_data/ensemble_to_genename.txt
#ENSG00000116641  

createQTLsnpAPAPhenTable_proc.py

def main(PhenFile, GenFile, outFile, snp, peak):
    fout=open(outFile, "w")
    #Phen=open(PhenFile, "r")
    Gen=open(GenFile, "r")
    #get ind and pheno info
    def get_pheno():
      Phen=open(PhenFile, "r")
      for num, ln in enumerate(Phen):
          if num == 0:
              indiv= ln.split()[4:]
          else:
              id=ln.split()[3].split(":")[3]
              peakID=id.split("_")[2]
              if peakID == peak:
                  pheno_list=ln.split()[4:]
                  pheno_data=list(zip(indiv,pheno_list))
                  #print(pheno_data)
                  return(pheno_data)
    def get_geno():
      for num, lnG in enumerate(Gen):
          if num == 13:
              Ind_geno=lnG.split()[9:]
          if num >= 14: 
              sid= lnG.split()[2]
              if sid == snp: 
                  gen_list=lnG.split()[9:]
                  allele1=[]
                  allele2=[]
                  for i in gen_list:
                      genotype=i.split(":")[0]
                      allele1.append(genotype.split("|")[0])
                      allele2.append(genotype.split("|")[1])
            #now i have my indiv., phen, allele 1, alle 2     
                  geno_data=list(zip(Ind_geno, allele1, allele2))
                  #print(geno_data)
                  return(geno_data)

    phenotype=get_pheno()
    pheno_df=pd.DataFrame(data=phenotype,columns=["Ind", "Pheno"])
    #print(pheno_df)
    genotype=get_geno()
    geno_df=pd.DataFrame(data=genotype, columns=["Ind", "Allele1", "Allele2"])
    #print(geno_df)
    full_df=pd.merge(geno_df, pheno_df, how="inner", on="Ind")
    full_df.to_csv(fout, sep="\t", encoding='utf-8', index=False)
    fout.close()
    

if __name__ == "__main__":
    import sys
    import pandas as pd
    chrom=sys.argv[1]
    snp = sys.argv[2]
    peak = sys.argv[3]
    fraction=sys.argv[4]
    
    PhenFile = "/project2/gilad/briana/threeprimeseq/data/phenotypes_filtPeakTranscript_noMP_GeneLocAnno_5percUs/filtered_APApeaks_merged_allchrom_refseqGenes.GeneLocAnno_NoMP_sm_quant.%s.fixed.pheno_5perc.fc.gz.phen_chr%s"%(fraction, chrom)
    GenFile= "/project2/gilad/briana/YRI_geno_hg19/chr%s.dose.filt.vcf"%(chrom)
    outFile = "/project2/gilad/briana/threeprimeseq/data/ApaQTL_proc_examples/qtlSNP_PeakAPA%s.%s%s.txt"%(fraction, snp, peak)
    main(PhenFile, GenFile, outFile, snp, peak)

createQTLsnpMolPhenTable.py changed the output dir

python createQTLsnpAPAPhenTable_proc.py 1 1:63018852  peak5329 Total
python createQTLsnpAPAPhenTable_proc.py 1 1:63018852  peak5329 Nuclear

sbatch run_createQTLsnpMolPhenTable.sh "1" "1:63018852" "ENSG00000116641"

Function to make plots:

plotQTL_func= function(SNP, peak, gene){
  apaN_file=read.table(paste("../data/apaExamp_proc/qtlSNP_PeakAPANuclear.", SNP, peak, ".txt", sep = "" ), header=T)
  apaT_file=read.table(paste("../data/apaExamp_proc/qtlSNP_PeakAPATotal.", SNP, peak, ".txt", sep = "" ), header=T)
  su30_file=read.table(paste("../data/apaExamp_proc/qtlSNP_Peak_4su_30_", SNP, gene, ".txt", sep=""), header = T)
  su60_file=read.table(paste("../data/apaExamp_proc/qtlSNP_Peak_4su_60_", SNP, gene, ".txt", sep=""), header=T)
  RNA_file=read.table(paste("../data/apaExamp_proc/qtlSNP_Peak_RNAseq_", SNP, gene, ".txt", sep=""),header=T)
  RNAg_file=read.table(paste("../data/apaExamp_proc/qtlSNP_Peak_RNAseqGeuvadis_", SNP, gene, ".txt", sep=""), header = T)
  ribo_file=read.table(paste("../data/apaExamp_proc/qtlSNP_Peak_ribo_", SNP, gene, ".txt", sep=""),header=T)
  prot_file=read.table(paste("../data/apaExamp_proc/qtlSNP_Peak_prot.", SNP, gene, ".txt", sep=""), header=T)
  
  ggplot_func= function(file, molPhen,GENE){
    file = file %>% mutate(genotype=Allele1 + Allele2)
    file$genotype= as.factor(as.character(file$genotype))
    plot=ggplot(file, aes(y=Pheno, x=genotype, by=genotype, fill=genotype)) + geom_boxplot(width=.25) + geom_jitter() + labs(y="Phenotpye",title=paste(molPhen, GENE, sep=": ")) + scale_fill_brewer(palette="Paired")
    return(plot)
  }
  
  apaNplot=ggplot_func(apaN_file, "Apa Nuclear", gene)
  apaTplot=ggplot_func(apaT_file, "Apa Total", gene)
  su30plot=ggplot_func(su30_file, "4su30",gene)
  su60plot=ggplot_func(su60_file, "4su60",gene)
  RNAplot=ggplot_func(RNA_file, "RNA Seq",gene)
  RNAgPlot=ggplot_func(RNAg_file, "RNA Seq Geuvadis",gene)
  riboPlot= ggplot_func(ribo_file, "Ribo Seq",gene)
  protplot=ggplot_func(prot_file, "Protein",gene)
  
  full_plot= plot_grid(apaNplot,apaTplot, RNAplot, protplot,nrow=2)
  return (full_plot)
}
DOC7_boxplots=plotQTL_func(SNP="1:63018852", peak="peak5329", gene="ENSG00000116641")
DOC7_boxplots

Version Author Date
a20b63c Briana Mittleman 2019-02-19
ab45fe8 Briana Mittleman 2019-02-19
ggsave(DOC7_boxplots, file="../output/plots/DOC7_boxplots.png")
Saving 7 x 5 in image

Only ApaPlot:

plotAPAQTL_func= function(SNP, peak, gene){
  apaN_file=read.table(paste("../data/apaExamp_proc/qtlSNP_PeakAPANuclear.", SNP, peak, ".txt", sep = "" ), header=T)
  apaT_file=read.table(paste("../data/apaExamp_proc/qtlSNP_PeakAPATotal.", SNP, peak, ".txt", sep = "" ), header=T)
  
  ggplot_func= function(file, molPhen,GENE){
    file = file %>% mutate(genotype=Allele1 + Allele2)
    file$genotype= as.factor(as.character(file$genotype))
    plot=ggplot(file, aes(y=Pheno, x=genotype, by=genotype, fill=genotype)) + geom_boxplot(width=.25) + geom_jitter() + labs(y="Phenotpye",title=paste(molPhen, GENE, sep=": ")) + scale_fill_brewer(palette="Paired")
    return(plot)
  }
  
  apaNplot=ggplot_func(apaN_file, "Apa Nuclear", gene)
  apaTplot=ggplot_func(apaT_file, "Apa Total", gene)

  
  full_plot= plot_grid(apaNplot,apaTplot,nrow=1)
  return (full_plot)
}
plotAPAQTL_func(SNP="1:63018852", peak="peak5329", gene="DOCK7")

Version Author Date
ab45fe8 Briana Mittleman 2019-02-19

FInd this in the catelog:

/project2/gilad/briana/genome_anotation_data/hg19GwasCatalog.sort.bed

1 63118195 63118196 rs10889353:19060911:DOCK7 0.32

In GWAS associated with LDL cholesteral and similar phenotypes

Locus zoom for this plot

grep DOCK7 /project2/gilad/briana/genome_anotation_data/ensemble_to_genename.txt
#ENSG00000116641


grep peak5329  /project2/gilad/briana/threeprimeseq/data/nominal_APAqtl_GeneLocAnno_noMP_5percUs/filtered_APApeaks_merged_allchrom_refseqGenes.GeneLocAnno_NoMP_sm_quant.Nuclear.fixed.pheno_5perc.fc.gz.qqnorm_allNomRes.txt > /project2/gilad/briana/threeprimeseq/data/LocusZoom_proc/NuclearAPA.peak5329.DOCK7.nomNuc.txt

grep peak5329  /project2/gilad/briana/threeprimeseq/data/nominal_APAqtl_GeneLocAnno_noMP_5percUs/filtered_APApeaks_merged_allchrom_refseqGenes.GeneLocAnno_NoMP_sm_quant.Total.fixed.pheno_5perc.fc.gz.qqnorm_allNomRes.txt  > /project2/gilad/briana/threeprimeseq/data/LocusZoom_proc/TotalAPA.peak5329.DOCK7.nomTotal.txt

grep ENSG00000116641 /project2/gilad/briana/threeprimeseq/data/molecular_QTLs/nom/fastqtl_qqnorm_RNAseq_phase2.fixed.nominal.out > /project2/gilad/briana/threeprimeseq/data/LocusZoom_proc/RNA.DOCK7.nomTotal.txt

grep ENSG00000116641 /project2/gilad/briana/threeprimeseq/data/molecular_QTLs/nom/fastqtl_qqnorm_prot.fixed.nominal.out > /project2/gilad/briana/threeprimeseq/data/LocusZoom_proc/Prot.DOCK7.nomTotal.txt

 grep ENSG00000116641 /project2/gilad/briana/threeprimeseq/data/molecular_QTLs/nom/fastqtl_qqnorm_ribo_phase2.fixed.nominal.out > /project2/gilad/briana/threeprimeseq/data/LocusZoom_proc/Ribo.DOCK7.nomTotal.txt
APATotal_DOCK7_LZ=read.table("../data/LocusZoom_proc/TotalAPA.peak5329.DOCK7.nomTotal.txt", stringsAsFactors = F, col.names = c("PeakID", "SNP", "Dist", "P","slope"))  %>% select( SNP, P)

write.table(APATotal_DOCK7_LZ,"../data/LocusZoom_proc/apaTotalDOCK7_LZ.txt", col.names = T, row.names = F, quote = F)


APANuclear_DOCK7_LZ=read.table("../data/LocusZoom_proc/NuclearAPA.peak5329.DOCK7.nomNuc.txt", stringsAsFactors = F, col.names = c("PeakID", "SNP", "Dist", "P","slope"))  %>% select( SNP, P)
write.table(APANuclear_DOCK7_LZ,"../data/LocusZoom_proc/apaNuclearDOCK7_LZ.txt", col.names = T, row.names = F, quote = F)


prot_DOCK7_LZ=read.table("../data/LocusZoom_proc/Prot.DOCK7.nomTotal.txt", stringsAsFactors = F, col.names = c("PeakID", "SNP", "Dist", "P","slope"))  %>% select( SNP, P)
write.table(prot_DOCK7_LZ,"../data/LocusZoom_proc/ProtDOCK7_LZ.txt", col.names = T, row.names = F, quote = F)

#sed -e 's/^/Chr/'


RNA_DOCK7_LZ=read.table("../data/LocusZoom_proc/RNA.DOCK7.nomTotal.txt", stringsAsFactors = F, col.names = c("PeakID", "SNP", "Dist", "P","slope"))  %>% select( SNP, P)

write.table(RNA_DOCK7_LZ,"../data/LocusZoom_proc/RNADOCK7_LZ.txt", col.names = T, row.names = F, quote = F)

#sed -e 's/^/Chr/'


ribo_DOCK7_LZ=read.table("../data/LocusZoom_proc/Ribo.DOCK7.nomTotal.txt", stringsAsFactors = F, col.names = c("PeakID", "SNP", "Dist", "P","slope"))  %>% select( SNP, P)

write.table(ribo_DOCK7_LZ,"../data/LocusZoom_proc/RiboDOCK7_LZ.txt", col.names = T, row.names = F, quote = F)
#sed -e 's/^/Chr/'

Put these on the locus zoom site.

12:95672642

peak39092 VEZT 12:95672642

grep VEZT /project2/gilad/briana/genome_anotation_data/ensemble_to_genename.txt
#ENSG00000028203 
gunzip /project2/gilad/briana/YRI_geno_hg19/chr12.dose.filt.vcf.gz

python createQTLsnpAPAPhenTable_proc.py 12 12:95672642 peak39092 Total
python createQTLsnpAPAPhenTable_proc.py 12 12:95672642   peak39092 Nuclear

sbatch run_createQTLsnpMolPhenTable.sh "12" "12:95672642" "ENSG00000028203"

No protein for this gene

plotQTL_func(SNP="12:95672642", peak="peak39092", gene="ENSG00000028203")

Version Author Date
a20b63c Briana Mittleman 2019-02-19
ab45fe8 Briana Mittleman 2019-02-19

12:95688540

Nuclear QTL

VEZT peak39092

Same gene peak

2:242018994

Nuclear QTL
MTERF4 peak96962 2:242018994

grep MTERF4 /project2/gilad/briana/genome_anotation_data/ensemble_to_genename.txt
#ENSG00000122085 
gunzip /project2/gilad/briana/YRI_geno_hg19/chr2.dose.filt.vcf.gz

python createQTLsnpAPAPhenTable_proc.py 2 2:242018994 peak96962 Total
python createQTLsnpAPAPhenTable_proc.py 2 2:242018994   peak96962 Nuclear

sbatch run_createQTLsnpMolPhenTable.sh "2" "2:242018994" "ENSG00000122085"

No protein for this gene

plotQTL_func(SNP="2:242018994", peak="peak96962", gene="ENSG00000122085")

Version Author Date
a20b63c Briana Mittleman 2019-02-19
ab45fe8 Briana Mittleman 2019-02-19

No protein data

5:172580291

BNIP1 _peak135178 5:172580291 Nuclear QTL

grep BNIP1 /project2/gilad/briana/genome_anotation_data/ensemble_to_genename.txt
#ENSG00000113734 
gunzip /project2/gilad/briana/YRI_geno_hg19/chr5.dose.filt.vcf.gz

python createQTLsnpAPAPhenTable_proc.py 5 5:172580291 peak135178 Total
python createQTLsnpAPAPhenTable_proc.py 5 5:172580291   peak135178 Nuclear

sbatch run_createQTLsnpMolPhenTable.sh "5" "5:172580291" "ENSG00000113734"
plotQTL_func(SNP="5:172580291", peak="peak135178", gene="ENSG00000113734")
Warning: Removed 1 rows containing non-finite values (stat_boxplot).
Warning: Removed 1 rows containing missing values (geom_point).

Version Author Date
a20b63c Briana Mittleman 2019-02-19

Not sure whats up with total

EIF2A

3:150302010 rs14434 peak114357

grep EIF2A /project2/gilad/briana/genome_anotation_data/ensemble_to_genename.txt
#ENSG00000144895 
gunzip /project2/gilad/briana/YRI_geno_hg19/chr3.dose.filt.vcf.gz

python createQTLsnpAPAPhenTable_proc.py 3 3:150302010 peak114357 Total
python createQTLsnpAPAPhenTable_proc.py 3 3:150302010 peak114357 Nuclear

sbatch run_createQTLsnpMolPhenTable.sh "3" "3:150302010" "ENSG00000144895"
EIF2a_plot=plotQTL_func(SNP="3:150302010", peak="peak114357", gene="ENSG00000144895")
EIF2a_plot

Version Author Date
a20b63c Briana Mittleman 2019-02-19
ggsave(EIF2a_plot, file="../output/plots/EIF2a_boxplots.png")
Saving 7 x 5 in image

Locus zoom for this one

(only have to redo the APA plots)

grep EIF2A /project2/gilad/briana/genome_anotation_data/ensemble_to_genename.txt
#ENSG00000144895


grep peak114357  /project2/gilad/briana/threeprimeseq/data/nominal_APAqtl_GeneLocAnno_noMP_5percUs/filtered_APApeaks_merged_allchrom_refseqGenes.GeneLocAnno_NoMP_sm_quant.Nuclear.fixed.pheno_5perc.fc.gz.qqnorm_allNomRes.txt > /project2/gilad/briana/threeprimeseq/data/LocusZoom_proc/NuclearAPA.peak114357.EIF2A.nomNuc.txt

grep peak114357 /project2/gilad/briana/threeprimeseq/data/nominal_APAqtl_GeneLocAnno_noMP_5percUs/filtered_APApeaks_merged_allchrom_refseqGenes.GeneLocAnno_NoMP_sm_quant.Total.fixed.pheno_5perc.fc.gz.qqnorm_allNomRes.txt  > /project2/gilad/briana/threeprimeseq/data/LocusZoom_proc/TotalAPA.peak114357.EIF2A.nomTotal.txt
APATotal_EIF2A_LZ=read.table("../data/LocusZoom_proc/TotalAPA.peak114357.EIF2A.nomTotal.txt", stringsAsFactors = F, col.names = c("PeakID", "SNP", "Dist", "P","slope"))  %>% select( SNP, P)

write.table(APATotal_EIF2A_LZ,"../data/LocusZoom_proc/apaTotalEIF2A_LZ.txt", col.names = T, row.names = F, quote = F)


APANuclear_EIF2A_LZ=read.table("../data/LocusZoom_proc/NuclearAPA.peak114357.EIF2A.nomNuc.txt", stringsAsFactors = F, col.names = c("PeakID", "SNP", "Dist", "P","slope"))  %>% select( SNP, P)
write.table(APANuclear_EIF2A_LZ,"../data/LocusZoom_proc/apaNuclearEIF2A_LZ.txt", col.names = T, row.names = F, quote = F)

Churc1

14:65389250 peak48989 TotalQTL rs10131002

grep CHURC1 /project2/gilad/briana/genome_anotation_data/ensemble_to_genename.txt
#ENSG00000258289 
gunzip /project2/gilad/briana/YRI_geno_hg19/chr14.dose.filt.vcf.gz

python createQTLsnpAPAPhenTable_proc.py 14 14:65389250 peak48989 Total
python createQTLsnpAPAPhenTable_proc.py 14 14:65389250   peak48989 Nuclear

sbatch run_createQTLsnpMolPhenTable.sh "14" "14:65389250" "ENSG00000258289"
plotQTL_func(SNP="14:65389250", peak="peak48989", gene="ENSG00000258289")

No protein but this is a good example of one that is an eQTL



sessionInfo()
R version 3.5.1 (2018-07-02)
Platform: x86_64-apple-darwin15.6.0 (64-bit)
Running under: macOS  10.14.1

Matrix products: default
BLAS: /Library/Frameworks/R.framework/Versions/3.5/Resources/lib/libRblas.0.dylib
LAPACK: /Library/Frameworks/R.framework/Versions/3.5/Resources/lib/libRlapack.dylib

locale:
[1] en_US.UTF-8/en_US.UTF-8/en_US.UTF-8/C/en_US.UTF-8/en_US.UTF-8

attached base packages:
[1] stats     graphics  grDevices utils     datasets  methods   base     

other attached packages:
 [1] bindrcpp_0.2.2  cowplot_0.9.3   reshape2_1.4.3  qvalue_2.12.0  
 [5] forcats_0.3.0   stringr_1.4.0   dplyr_0.7.6     purrr_0.2.5    
 [9] readr_1.1.1     tidyr_0.8.1     tibble_1.4.2    ggplot2_3.0.0  
[13] tidyverse_1.2.1 workflowr_1.2.0

loaded via a namespace (and not attached):
 [1] tidyselect_0.2.4   splines_3.5.1      haven_1.1.2       
 [4] lattice_0.20-35    colorspace_1.3-2   htmltools_0.3.6   
 [7] yaml_2.2.0         utf8_1.1.4         rlang_0.2.2       
[10] pillar_1.3.0       glue_1.3.0         withr_2.1.2       
[13] RColorBrewer_1.1-2 modelr_0.1.2       readxl_1.1.0      
[16] bindr_0.1.1        plyr_1.8.4         munsell_0.5.0     
[19] gtable_0.2.0       cellranger_1.1.0   rvest_0.3.2       
[22] evaluate_0.13      labeling_0.3       knitr_1.20        
[25] fansi_0.4.0        broom_0.5.0        Rcpp_0.12.19      
[28] scales_1.0.0       backports_1.1.2    jsonlite_1.6      
[31] fs_1.2.6           hms_0.4.2          digest_0.6.17     
[34] stringi_1.2.4      grid_3.5.1         rprojroot_1.3-2   
[37] cli_1.0.1          tools_3.5.1        magrittr_1.5      
[40] lazyeval_0.2.1     crayon_1.3.4       whisker_0.3-2     
[43] pkgconfig_2.0.2    xml2_1.2.0         lubridate_1.7.4   
[46] assertthat_0.2.0   rmarkdown_1.11     httr_1.3.1        
[49] rstudioapi_0.9.0   R6_2.3.0           nlme_3.1-137      
[52] git2r_0.24.0       compiler_3.5.1