Last updated: 2023-11-09

Checks: 7 0

Knit directory: muse/

This reproducible R Markdown analysis was created with workflowr (version 1.7.1). The Checks tab describes the reproducibility checks that were applied when the results were created. The Past versions tab lists the development history.

R Markdown file: up-to-date

Great! Since the R Markdown file has been committed to the Git repository, you know the exact version of the code that produced these results.

Environment: empty

Great job! The global environment was empty. Objects defined in the global environment can affect the analysis in your R Markdown file in unknown ways. For reproduciblity it’s best to always run the code in an empty environment.

Seed: set.seed(20200712)

The command set.seed(20200712) was run prior to running the code in the R Markdown file. Setting a seed ensures that any results that rely on randomness, e.g. subsampling or permutations, are reproducible.

Session information: recorded

Great job! Recording the operating system, R version, and package versions is critical for reproducibility.

Cache: none

Nice! There were no cached chunks for this analysis, so you can be confident that you successfully produced the results during this run.

File paths: relative

Great job! Using relative paths to the files within your workflowr project makes it easier to run your code on other machines.

Repository version: b4509a9

Great! You are using Git for version control. Tracking code development and connecting the code version to the results is critical for reproducibility.

The results in this page were generated with repository version b4509a9. See the Past versions tab to see a history of the changes made to the R Markdown and HTML files.

Note that you need to be careful to ensure that all relevant files for the analysis have been committed to Git prior to generating the results (you can use wflow_publish or wflow_git_commit). workflowr only checks the R Markdown file, but you know if there are other scripts or data files that it depends on. Below is the status of the Git repository when the results were generated: 


Ignored files:
    Ignored:    .Rhistory
    Ignored:    .Rproj.user/
    Ignored:    analysis/figure/
    Ignored:    r_packages_4.3.2/

Untracked files:
    Untracked:  analysis/cell_ranger.Rmd
    Untracked:  analysis/sleuth.Rmd
    Untracked:  analysis/tss_xgboost.Rmd
    Untracked:  code/multiz100way/
    Untracked:  data/HG00702_SH089_CHSTrio.chr1.vcf.gz
    Untracked:  data/HG00702_SH089_CHSTrio.chr1.vcf.gz.tbi
    Untracked:  data/ncrna_NONCODE[v3.0].fasta.tar.gz
    Untracked:  data/ncrna_noncode_v3.fa
    Untracked:  data/netmhciipan.out.gz
    Untracked:  export/davetang039sblog.WordPress.2023-06-30.xml
    Untracked:  export/output/
    Untracked:  women.json

Unstaged changes:
    Modified:   analysis/graph.Rmd

Note that any generated files, e.g. HTML, png, CSS, etc., are not included in this status report because it is ok for generated content to have uncommitted changes.

These are the previous versions of the repository in which changes were made to the R Markdown (analysis/survival.Rmd) and HTML (docs/survival.html) files. If you’ve configured a remote Git repository (see ?wflow_git_remote), click on the hyperlinks in the table below to view the files as they were in that past version.

File Version Author Date Message
Rmd b4509a9 Dave Tang 2023-11-09 Include additional covariates
html 797564f Dave Tang 2023-11-09 Build site.
Rmd 37e1a56 Dave Tang 2023-11-09 Cox proportional-hazards model
html b1d68db Dave Tang 2023-11-09 Build site.
Rmd 16f2e4c Dave Tang 2023-11-09 Survival analysis

Introduction

Survival analysis corresponds to a set of statistical approaches used to investigate the time it takes for an event of interest to occur. It is used in:

  • Cancer studies for patient’s survival time analysis
  • Sociology for event-history analysis
  • Engineering for failure-time analysis

In cancer studies, typical research questions include:

  • What is the impact of certain clinical characteristics on patient’s survival?
  • What is the probability that an individual survives 3 years?
  • Are there differences in survival between groups of patients?

Most survival analyses in cancer studies use the following methods:

  • Kaplan-Meier plots to visualise survival curves
  • Log-rank test to compare the survival curves of two or more groups
  • Cox proportional hazards regression to describe the effect of variables on survival

Basic concepts

Survival time and type of events in cancer studies

There are different types of events in cancer studies, including:

  • Relapse
  • Progression
  • Death

The time from “response to treatment” (complete remission) to the occurrence of the event of interest is commonly called survival time (or time to event).

The two most important measures in cancer studies include:

  1. The time to death
  2. The relapse-free survival time, which corresponds to the time between response to treatment and recurrence of the disease. It is also known as disease-free survival time and event-free survival time.

Censoring

Survival analysis focuses on the expected duration of time until occurrence of an event of interest (relapse or death). However, the event may not be observed for some individuals within the study time period, producing the so-called censored observations.

Censoring may arise in the following ways:

  1. A patient has not (yet) experienced the event of interest, such as relapse or death, within the study time period;
  2. A patient is lost to follow-up during the study period;
  3. A patient experiences a different event that makes further follow-up impossible.

Survival and hazard functions

Two related probabilities are used to describe survival data:

  1. The survival probability
  2. The hazard probability

The survival probability, also known as the survivor function \(S(t)\), is the probability that an individual survives from the time origin (e.g. diagnosis of cancer) to a specified future time \(t\).

The hazard, denoted by \(h(t)\), is the probability that an individual who is under observation at a time \(t\) has an event at that time.

The survivor function focuses on not having an event and the hazard function focuses on the event occurring.

Kaplan-Meier survival estimate

The Kaplan-Meier (KM) method is a non-parametric method used to estimate the survival probability from observed survival times (Kaplan and Meier, 1958).

The survival probability at time \(t_i\), \(S(t_i)\) is calculated as follows:

\[ S(t_i) = S(t_{i-1})(1 - \frac{d_i}{n_i}) \]

Where:

  • \(S(t_i-1)\) = the probability of being alive at \(t_{i-1}\)
  • \(n_i\) = the number of patients alive just before \(t_i\)
  • \(d_i\) = the number of events at \(t_i\)
  • \(t_0 = 0\) and \(S(0) = 1\)

The estimated probability \(S(t)\) is a step function that changes value only at the time of each event. It is also possible to compute confidence intervals for the survival probability.

The KM survival curve, a plot of the KM survival probability against time, provides a useful summary of the data that can be used to estimate measures such as median survival time.

Survival analysis in R

The commonly used packages for survival analysis are

  • {survival} for computing survival analyses
  • {survminer} for summarising and visualising the results of survival analysis

Install the packages, if they are not already installed, and load them

my_packages <- c('survival', 'survminer')

sapply(my_packages, function(p){
  if(!require(p, character.only = TRUE)){
    install.packages(p)
    library(p, character.only = TRUE)
  }
  as.character(packageVersion(p))
})
 survival survminer 
  "3.5.7"   "0.4.9"

Lung cancer data

The survival package comes with lung cancer data.

data(cancer, package="survival")
str(lung)
'data.frame':   228 obs. of  10 variables:
 $ inst     : num  3 3 3 5 1 12 7 11 1 7 ...
 $ time     : num  306 455 1010 210 883 ...
 $ status   : num  2 2 1 2 2 1 2 2 2 2 ...
 $ age      : num  74 68 56 57 60 74 68 71 53 61 ...
 $ sex      : num  1 1 1 1 1 1 2 2 1 1 ...
 $ ph.ecog  : num  1 0 0 1 0 1 2 2 1 2 ...
 $ ph.karno : num  90 90 90 90 100 50 70 60 70 70 ...
 $ pat.karno: num  100 90 90 60 90 80 60 80 80 70 ...
 $ meal.cal : num  1175 1225 NA 1150 NA ...
 $ wt.loss  : num  NA 15 15 11 0 0 10 1 16 34 ...

The format of the lung data is as follows:

Column Details
inst Institution code
time Survival time in days
status censoring status 1=censored, 2=dead
age Age in years
sex Male=1 Female=2
ph.ecog ECOG performance score
ph.karno Karnofsky performance score (bad=0-good=100) rated by physician
pat.karno Karnofsky performance score as rated by patient
meal.cal Calories consumed at meals
wt.loss Weight loss in last six months (pounds)

ECOG performance score is as rated by the physician.

  • 0 = asymptomatic
  • 1 = symptomatic but completely ambulatory
  • 2 = in bed <50% of the day
  • 3 = in bed > 50% of the day but not bedbound,
  • 4 = bedbound

Compute survival curves

The function survfit() can be used to compute Kaplan-Meier survival estimates. Its main arguments include:

  • A survival object created using the function Surv()
  • The data set containing the variables

Compute the survival probability by gender.

fit <- survfit(Surv(time, status) ~ sex, data = lung)
fit
Call: survfit(formula = Surv(time, status) ~ sex, data = lung)

        n events median 0.95LCL 0.95UCL
sex=1 138    112    270     212     310
sex=2  90     53    426     348     550

Use summary(fit) to get a complete summary of the survival curves.

names(fit)
 [1] "n"         "time"      "n.risk"    "n.event"   "n.censor"  "surv"     
 [7] "std.err"   "cumhaz"    "std.chaz"  "strata"    "type"      "logse"    
[13] "conf.int"  "conf.type" "lower"     "upper"     "call"

The surv_summary() function can also be used to get a summary of survival curves.

fit_sum <- surv_summary(fit)
Warning in .get_data(x, data = data): The `data` argument is not provided. Data
will be extracted from model fit.
head(fit_sum)
  time n.risk n.event n.censor      surv    std.err     upper     lower strata
1   11    138       3        0 0.9782609 0.01268978 1.0000000 0.9542301  sex=1
2   12    135       1        0 0.9710145 0.01470747 0.9994124 0.9434235  sex=1
3   13    134       2        0 0.9565217 0.01814885 0.9911586 0.9230952  sex=1
4   15    132       1        0 0.9492754 0.01967768 0.9866017 0.9133612  sex=1
5   26    131       1        0 0.9420290 0.02111708 0.9818365 0.9038355  sex=1
6   30    130       1        0 0.9347826 0.02248469 0.9768989 0.8944820  sex=1
  sex
1   1
2   1
3   1
4   1
5   1
6   1
Name Details
time the time points at which the curve has a step
n.risk the number of subjects at risk at time t
n.event the number of events that occurred at time t
n.censor the number of censored subjects, who exit the risk set, without an event, at time t
surv estimate of survival probability
std.err standard error of survival
lower,upper lower and upper confidence limits for the curve, respectively
strata indicates stratification of curve estimation

If strata is not NULL, there are multiple curves in the result. The levels of strata (a factor) are the labels for the curves.

Visualise survival curves

The ggsurvplot() function can be used to produce the survival curves for the two groups of subjects.

It is possible to show:

  • The 95% confidence limits of the survivor function using the argument conf.int = TRUE
  • The number and/or the percentage of individuals at risk by time using the option risk.table. Allowed values for risk.table include:
    • TRUE or FALSE specifying whether to show or not the risk table. Default is FALSE
    • absolute or percentage to show the absolute number and the percentage of subjects at risk by time, respectively. Use abs_pct to show both absolute number and percentage.
  • The p-value of the Log-Rank test comparing the groups using pval = TRUE
  • Horizontal/vertical line at median survival using the argument surv.median.line. Allowed values include: none, hv, h, and v

We will plot the survival plot with the following options:

  • Add risk table
  • Change risk table color by groups
  • Change line type by groups
  • Specify median survival
  • Use the theme_bw() ggplot2 theme
  • Plot the number of censored subjects at time t
ggsurvplot(
  fit,
  pval = TRUE,
  pval.method = TRUE,
  conf.int = TRUE,
  risk.table = TRUE,
  risk.table.col = "strata",
  linetype = "strata",
  surv.median.line = "hv",
  ggtheme = theme_bw(),
  ncensor.plot = TRUE,
  palette = c("#E7B800", "#2E9FDF")
)

Version Author Date
b1d68db Dave Tang 2023-11-09

The x-axis represents time in days, and the y-axis shows the probability of surviving or the proportion of people surviving. The lines represent survival curves of the two groups. A vertical drop in the curves indicates an event, which in this case is the status (1 = censored and 2 = dead). The vertical tick mark on the curves means that a patient was censored at this time.

At time zero, the survival probability is 1.0. At time 250, the probability of survival is approximately 0.55 (or 55%) for sex=1 and 0.75 (or 75%) for sex=2. The median survival is approximately 270 days for sex=1 and 426 days for sex=2, suggesting a good survival for sex=2 compared to sex=1.

summary(fit)$table
      records n.max n.start events    rmean se(rmean) median 0.95LCL 0.95UCL
sex=1     138   138     138    112 326.0841  22.91156    270     212     310
sex=2      90    90      90     53 460.6473  34.68985    426     348     550

There appears to be a survival advantage for female with lung cancer compare to male. However, to evaluate whether this difference is statistically significant requires a formal statistical test.

Three often used transformations for ggsurvplot can be specified using the argument fun:

  • log: log transformation of the survivor function
  • event: plots cumulative events \(f(y) = 1-y\). It is also known as the cumulative incidence
  • cumhaz plots the cumulative hazard function \(f(y) = -log(y)\)

Plot cumulative events.

ggsurvplot(
  fit,
  conf.int = TRUE,
  risk.table.col = "strata",
  ggtheme = theme_bw(),
  palette = c("#E7B800", "#2E9FDF"),
  fun = "event"
)

Version Author Date
b1d68db Dave Tang 2023-11-09

The cumulative hazard is commonly used to estimate the hazard probability. It is defined as \(H(t) = −log(S(t))\). The cumulative hazard \(H(t)\) can be interpreted as the cumulative force of mortality. In other words, it corresponds to the number of events that would be expected for each individual by time \(t\) if the event were a repeatable process.

ggsurvplot(
  fit,
  conf.int = TRUE,
  risk.table.col = "strata",
  ggtheme = theme_bw(),
  palette = c("#E7B800", "#2E9FDF"),
  fun = "cumhaz"
)

Version Author Date
b1d68db Dave Tang 2023-11-09

Log-Rank test comparing survival curves

The log-rank test is the most widely used method of comparing two or more survival curves. The null hypothesis is that there is no difference in survival between the two groups. The log rank test is a non-parametric test, which makes no assumptions about the survival distributions.

Essentially, the log rank test compares the observed number of events in each group to what would be expected if the null hypothesis were true (i.e., if the survival curves were identical). The log rank statistic is approximately distributed as a chi-square test statistic.

The survdiff() function can be used to compute log-rank test comparing two or more survival curves.

sex_survdiff <- survdiff(Surv(time, status) ~ sex, data = lung)
sex_survdiff
Call:
survdiff(formula = Surv(time, status) ~ sex, data = lung)

        N Observed Expected (O-E)^2/E (O-E)^2/V
sex=1 138      112     91.6      4.55      10.3
sex=2  90       53     73.4      5.68      10.3

 Chisq= 10.3  on 1 degrees of freedom, p= 0.001

The log rank test for difference in survival gives a p-value of 0.0013112, indicating that the sex groups differ significantly in survival.

Summary

Survival analysis is a set of statistical approaches for data analysis where the outcome variable of interest is time until an event occurs.

Survival data are generally described and modeled in terms of two related functions:

  • The survivor function representing the probability that an individual survives from the time of origin to some time beyond time \(t\). It is usually estimated by the Kaplan-Meier method. The logrank test may be used to test for differences between survival curves for groups, such as treatments or gender as per this post.
  • The hazard function gives the instantaneous potential of having an event at a time, given survival up to that time. It is used primarily as a diagnostic tool or for specifying a mathematical model for survival analysis.

Take home message: The survivor function focuses on not having an event and the hazard function focuses on the event occurring.

Cox Proportional-Hazards Model

The Cox proportional-hazards model (Cox, 1972) is essentially a regression model commonly used in medical research for investigating the association between the survival time of patients and one or more predictor variables.

In the Survival analysis in R section, we looked at Kaplan-Meier curves and logrank tests, which are examples of univariate analysis. They describe the survival according to one factor under investigation, but ignore the impact of any others. Additionally, Kaplan-Meier curves and logrank tests are useful only when the predictor variable is categorical and do not work easily for quantitative predictors such as gene expression, weight, or age.

An alternative method is the Cox proportional hazards regression analysis, which works for both quantitative predictor variables and for categorical variables. Furthermore, the Cox regression model extends survival analysis methods to assess simultaneously the effect of several risk factors on survival time.

The Cox proportional-hazards model is one of the most important methods used for modelling survival analysis data.

The need for multivariate statistical modeling

In clinical investigations, there are many situations, where several known quantities (known as covariates), potentially affecting patient prognosis; for example, comparing two groups of patients where one group has a specific genotype against those without. Furthermore, if one of the groups also contains older individuals, any difference in survival may be attributable to genotype or age (confounding) or indeed both. Hence, when investigating survival in relation to any one factor, it is often desirable to adjust for the impact of others. A statistical model can provide the effect size for each factor.

Basics of the Cox proportional hazards model

The purpose of the model is to evaluate simultaneously the effect of several factors on survival. In other words, it allows us to examine how specified factors influence the rate of a particular event happening (e.g., infection, death) at a particular point in time. This rate is commonly referred as the hazard rate. Predictor variables (or factors) are usually termed covariates in the survival-analysis literature.

The Cox model is expressed by the hazard function denoted by \(h(t)\). Briefly, the hazard function can be interpreted as the risk of dying at time \(t\). It can be estimated as follow:

\[ h(t) = h_0(t) \times exp(b_1x_1 + b_2x_2 + \ldots + b_px_p) \]

where:

  • \(t\) represents the survival time
  • \(h(t)\) is the hazard function determined by a set of \(p\) covariates \((x_1, x_2, \ldots, x_p)\)
  • the coefficients \((b_1, b_2, \ldots, b_p)\) measure the impact (i.e., the effect size) of covariates
  • the term \(h_0\) is called the baseline hazard. It corresponds to the value of the hazard if all the \(x_i\) are equal to zero (the quantity \(exp(0)\) equals 1). The \(t\) in \(h(t)\) reminds us that the hazard may vary over time.

The Cox model can be written as a multiple linear regression of the logarithm of the hazard on the variables \(x_i\), with the baseline hazard being an intercept term that varies with time.

The quantities \(exp(b_i)\) are called hazard ratios (HR). A value of \(b_i\) greater than zero, or equivalently a hazard ratio greater than one, indicates that as the value of the \(i^{th}\) covariate increases, the event hazard increases and thus the length of survival decreases.

A hazard ratio above 1 indicates a covariate that is positively associated with the event probability, and thus negatively associated with the length of survival.

In summary:

  • HR = 1: No effect
  • HR < 1: Reduction in the hazard
  • HR > 1: Increase in hazard

In cancer studies:

  • A covariate with hazard ratio > 1 (i.e.: \(b > 0\)) is called bad prognostic factor
  • A covariate with hazard ratio < 1 (i.e.: \(b < 0\)) is called good prognostic factor

A key assumption of the Cox model is that the hazard curves for the groups of observations (or patients) should be proportional and cannot cross. In other words, if an individual has a risk of death at some initial time point that is twice as high as that of another individual, then at all later times the risk of death remains twice as high.

Computing the Cox model

The coxph function can be used to compute the Cox proportional hazards regression model in R. The simplified format is:

coxph(formula, data, method)
  • formula specifies a linear model with a survival object as the response variable. The survival object is created using the Surv() function Surv(time, event).
  • data is a data frame that contains the variables.
  • method is used to specify how to handle ties. The default is efron. Other options are breslow and exact. The default efron is generally preferred to the once-popular breslow method and the exact method is much more computationally intensive.

We will compute a univariate Cox analysis.

sex_cox <- coxph(Surv(time, status) ~ sex, data = lung)
summary(sex_cox)
Call:
coxph(formula = Surv(time, status) ~ sex, data = lung)

  n= 228, number of events= 165 

       coef exp(coef) se(coef)      z Pr(>|z|)   
sex -0.5310    0.5880   0.1672 -3.176  0.00149 **
---
Signif. codes:  0 '***' 0.001 '**' 0.01 '*' 0.05 '.' 0.1 ' ' 1

    exp(coef) exp(-coef) lower .95 upper .95
sex     0.588      1.701    0.4237     0.816

Concordance= 0.579  (se = 0.021 )
Likelihood ratio test= 10.63  on 1 df,   p=0.001
Wald test            = 10.09  on 1 df,   p=0.001
Score (logrank) test = 10.33  on 1 df,   p=0.001

The Cox regression results can be interpreted as follow:

  1. Statistical significance. The column marked z gives the Wald statistic value. It corresponds to the ratio of each regression coefficient to its standard error (z = coef/se(coef)). The Wald statistic evaluates, whether the beta (\(\beta\)) coefficient of a given variable is statistically significantly different from 0. From the output above, we can conclude that the variable sex have highly statistically significant coefficients.

  2. The regression coefficients. The second feature to note in the Cox model results is the the sign of the regression coefficients (coef). A positive sign means that the hazard (risk of death) is higher, and thus the prognosis worse, for subjects with higher values of that variable. The variable sex is encoded as a numeric vector; 1: male, 2: female. The R summary for the Cox model gives the hazard ratio (HR) for the second group relative to the first group, that is, female versus male. The beta coefficient for sex = -0.53 indicates that females have lower risk of death (lower survival rates) than males, in the lung dataset.

  3. Hazard ratios. The exponentiated coefficients (exp(coef) = exp(-0.53) = 0.59), also known as hazard ratios, give the effect size of covariates. For example, being female (sex=2) reduces the hazard by a factor of 0.59, or 41%. Being female is associated with good prognostic.

  4. Confidence intervals of the hazard ratios. The summary output also gives upper and lower 95% confidence intervals for the hazard ratio (exp(coef)), lower 95% bound = 0.4237, upper 95% bound = 0.816.

  5. Global statistical significance of the model. Finally, the output gives p-values for three alternative tests for overall significance of the model: The likelihood-ratio test, Wald test, and score logrank statistics. These three methods are asymptotically equivalent. For large enough N, they will give similar results. For small N, they may differ somewhat. The Likelihood ratio test has better behavior for small sample sizes, so it is generally preferred.

Perform the univariate Cox analysis on other covariates.

covariates <- c("age", "sex",  "ph.karno", "pat.karno", "ph.ecog", "wt.loss")
univ_formulas <- sapply(
  covariates,
  function(x) as.formula(paste('Surv(time, status)~', x))
)

univ_models <- lapply(univ_formulas, function(x){
  coxph(x, data = lung)}
)

univ_results <- lapply(
  univ_models,
  function(x){ 
    x <- summary(x)
    p.value<-signif(x$wald["pvalue"], digits=2)
    wald.test<-signif(x$wald["test"], digits=2)
    beta<-signif(x$coef[1], digits=2)
    HR <-signif(x$coef[2], digits=2)
    HR.confint.lower <- signif(x$conf.int[,"lower .95"], 2)
    HR.confint.upper <- signif(x$conf.int[,"upper .95"],2)
    HR <- paste0(
      HR, " (", 
      HR.confint.lower, "-", HR.confint.upper, ")"
    )
    res<-c(beta, HR, wald.test, p.value)
    names(res)<-c("beta", "HR (95% CI for HR)", "wald.test", "p.value")
    return(res)
  }
)
res <- t(as.data.frame(univ_results, check.names = FALSE))
as.data.frame(res)
            beta HR (95% CI for HR) wald.test p.value
age        0.019            1 (1-1)       4.1   0.042
sex        -0.53   0.59 (0.42-0.82)        10  0.0015
ph.karno  -0.016      0.98 (0.97-1)       7.9   0.005
pat.karno  -0.02   0.98 (0.97-0.99)        13 0.00028
ph.ecog     0.48        1.6 (1.3-2)        18 2.7e-05
wt.loss   0.0013         1 (0.99-1)      0.05    0.83

The variables age, sex, ph.karno, pat.karno, and ph.ecog have statistically significant coefficients. age and ph.ecog have positive beta coefficients, while sex has a negative coefficient. Thus, older age and higher ph.ecog are associated with poorer survival, whereas being female (sex=2) is associated with better survival.

To perform a multivariate Cox regression analysis, include the additional covariates in the formula.

res_cox <- coxph(Surv(time, status) ~ age + sex + ph.karno + pat.karno + ph.ecog + wt.loss, data =  lung)
summary(res_cox)
Call:
coxph(formula = Surv(time, status) ~ age + sex + ph.karno + pat.karno + 
    ph.ecog + wt.loss, data = lung)

  n= 210, number of events= 148 
   (18 observations deleted due to missingness)

               coef exp(coef)  se(coef)      z Pr(>|z|)    
age        0.013058  1.013144  0.009866  1.324 0.185639    
sex       -0.625167  0.535172  0.178703 -3.498 0.000468 ***
ph.karno   0.020116  1.020320  0.010178  1.976 0.048111 *  
pat.karno -0.014743  0.985365  0.007300 -2.019 0.043440 *  
ph.ecog    0.675227  1.964479  0.198735  3.398 0.000680 ***
wt.loss   -0.013243  0.986844  0.007009 -1.889 0.058836 .  
---
Signif. codes:  0 '***' 0.001 '**' 0.01 '*' 0.05 '.' 0.1 ' ' 1

          exp(coef) exp(-coef) lower .95 upper .95
age          1.0131     0.9870    0.9937    1.0329
sex          0.5352     1.8686    0.3770    0.7596
ph.karno     1.0203     0.9801    1.0002    1.0409
pat.karno    0.9854     1.0149    0.9714    0.9996
ph.ecog      1.9645     0.5090    1.3307    2.9001
wt.loss      0.9868     1.0133    0.9734    1.0005

Concordance= 0.656  (se = 0.025 )
Likelihood ratio test= 37.2  on 6 df,   p=2e-06
Wald test            = 36.49  on 6 df,   p=2e-06
Score (logrank) test = 37.59  on 6 df,   p=1e-06

The p-value for all three overall tests (likelihood, Wald, and score) are significant, indicating that the model is significant. These tests evaluate the omnibus null hypothesis that all of the betas are 0. In the above example, the test statistics are in close agreement, and the omnibus null hypothesis is soundly rejected.

In the multivariate Cox analysis, the covariates sex, ph.karno, pat.karno, and ph.ecog remain significant (p < 0.05) and the covariate age is no longer significant.

The p-value for sex is 0.000986, with a hazard ratio HR = exp(coef) = 0.58, indicating a strong relationship between the patients’ sex and decreased risk of death. The hazard ratios of covariates are interpretable as multiplicative effects on the hazard. For example, holding the other covariates constant, being female (sex=2) reduces the hazard by a factor of 0.58, or 42%. We conclude that, being female is associated with good prognostic.

Similarly, the p-value for ph.ecog is 4.45e-05, with a hazard ratio HR = 1.59, indicating a strong relationship between the ph.ecog value and increased risk of death. Holding the other covariates constant, a higher value of ph.ecog is associated with a poor survival.

By contrast, the p-value for age is now p=0.23, compared to the univariate Cox analysis. The hazard ratio HR = exp(coef) = 1.01, with a 95% confidence interval of 0.99 to 1.03. Because the confidence interval for HR includes 1, these results indicate that age makes a smaller contribution to the difference in the HR after adjusting for the ph.ecog values and patient’s sex, and only trend toward significance. For example, holding the other covariates constant, an additional year of age induce daily hazard of death by a factor of exp(beta) = 1.01, or 1%, which is not a significant contribution.

We can visualise the predicted survival proportion at any given point in time for a particular risk group. The survfit() function estimates the survival proportion, by default at the mean values of covariates.

ggsurvplot(
  survfit(res_cox),
  ggtheme = theme_minimal(),
  color = "#2E9FDF",
  data = lung
)
Warning: Now, to change color palette, use the argument palette= '#2E9FDF'
instead of color = '#2E9FDF'

Version Author Date
797564f Dave Tang 2023-11-09

Consider that, we want to assess the impact of the sex on the estimated survival probability. In this case, we construct a new data frame with two rows, one for each value of sex; the other covariates are fixed to their average values (if they are continuous variables) or to their lowest level (if they are discrete variables). For a dummy covariate, the average value is the proportion coded 1 in the data set. This data frame is passed to survfit() via the newdata argument.

sex_df <- with(
  lung,
  data.frame(
    sex = c(1, 2), 
    age = rep(mean(age, na.rm = TRUE), 2),
    ph.ecog = c(1, 1),
    ph.karno = rep(mean(ph.karno, na.rm=TRUE), 2),
    pat.karno = rep(mean(pat.karno, na.rm=TRUE), 2),
    wt.loss = rep(mean(wt.loss, na.rm=TRUE), 2)
  )
)
sex_df
  sex      age ph.ecog ph.karno pat.karno  wt.loss
1   1 62.44737       1 81.93833  79.95556 9.831776
2   2 62.44737       1 81.93833  79.95556 9.831776
fit <- survfit(res_cox, newdata = sex_df)
ggsurvplot(
  fit,
  conf.int = TRUE,
  legend.labs=c("Sex=1", "Sex=2"),
  ggtheme = theme_minimal(),
  data = lung
)
Warning: `gather_()` was deprecated in tidyr 1.2.0.
ℹ Please use `gather()` instead.
ℹ The deprecated feature was likely used in the survminer package.
  Please report the issue at <https://github.com/kassambara/survminer/issues>.
This warning is displayed once every 8 hours.
Call `lifecycle::last_lifecycle_warnings()` to see where this warning was
generated.

Version Author Date
797564f Dave Tang 2023-11-09

References


sessionInfo()
R version 4.3.2 (2023-10-31)
Platform: x86_64-pc-linux-gnu (64-bit)
Running under: Ubuntu 22.04.3 LTS

Matrix products: default
BLAS:   /usr/lib/x86_64-linux-gnu/openblas-pthread/libblas.so.3 
LAPACK: /usr/lib/x86_64-linux-gnu/openblas-pthread/libopenblasp-r0.3.20.so;  LAPACK version 3.10.0

locale:
 [1] LC_CTYPE=en_US.UTF-8       LC_NUMERIC=C              
 [3] LC_TIME=en_US.UTF-8        LC_COLLATE=en_US.UTF-8    
 [5] LC_MONETARY=en_US.UTF-8    LC_MESSAGES=en_US.UTF-8   
 [7] LC_PAPER=en_US.UTF-8       LC_NAME=C                 
 [9] LC_ADDRESS=C               LC_TELEPHONE=C            
[11] LC_MEASUREMENT=en_US.UTF-8 LC_IDENTIFICATION=C       

time zone: Etc/UTC
tzcode source: system (glibc)

attached base packages:
[1] stats     graphics  grDevices utils     datasets  methods   base     

other attached packages:
[1] survminer_0.4.9 ggpubr_0.6.0    ggplot2_3.4.4   survival_3.5-7 
[5] workflowr_1.7.1

loaded via a namespace (and not attached):
 [1] gtable_0.3.4      xfun_0.41         bslib_0.5.1       processx_3.8.2   
 [5] rstatix_0.7.2     lattice_0.21-9    callr_3.7.3       vctrs_0.6.4      
 [9] tools_4.3.2       ps_1.7.5          generics_0.1.3    tibble_3.2.1     
[13] fansi_1.0.5       highr_0.10        pkgconfig_2.0.3   Matrix_1.6-1.1   
[17] data.table_1.14.8 lifecycle_1.0.3   farver_2.1.1      compiler_4.3.2   
[21] stringr_1.5.0     git2r_0.32.0      munsell_0.5.0     getPass_0.2-2    
[25] carData_3.0-5     httpuv_1.6.12     htmltools_0.5.7   sass_0.4.7       
[29] yaml_2.3.7        crayon_1.5.2      later_1.3.1       pillar_1.9.0     
[33] car_3.1-2         jquerylib_0.1.4   whisker_0.4.1     tidyr_1.3.0      
[37] cachem_1.0.8      abind_1.4-5       km.ci_0.5-6       commonmark_1.9.0 
[41] tidyselect_1.2.0  digest_0.6.33     stringi_1.7.12    dplyr_1.1.3      
[45] purrr_1.0.2       labeling_0.4.3    splines_4.3.2     rprojroot_2.0.4  
[49] fastmap_1.1.1     grid_4.3.2        colorspace_2.1-0  cli_3.6.1        
[53] magrittr_2.0.3    utf8_1.2.4        broom_1.0.5       withr_2.5.2      
[57] scales_1.2.1      promises_1.2.1    backports_1.4.1   rmarkdown_2.25   
[61] httr_1.4.7        ggtext_0.1.2      gridExtra_2.3     ggsignif_0.6.4   
[65] zoo_1.8-12        evaluate_0.23     knitr_1.45        KMsurv_0.1-5     
[69] markdown_1.11     survMisc_0.5.6    rlang_1.1.2       gridtext_0.1.5   
[73] Rcpp_1.0.11       xtable_1.8-4      glue_1.6.2        xml2_1.3.5       
[77] rstudioapi_0.15.0 jsonlite_1.8.7    R6_2.5.1          fs_1.6.3