Last updated: 2019-08-15
Checks: 7 0
Knit directory: polymeRID/
This reproducible R Markdown analysis was created with workflowr (version 1.4.0.9001). The Checks tab describes the reproducibility checks that were applied when the results were created. The Past versions tab lists the development history.
Great! Since the R Markdown file has been committed to the Git repository, you know the exact version of the code that produced these results.
Great job! The global environment was empty. Objects defined in the global environment can affect the analysis in your R Markdown file in unknown ways. For reproduciblity it’s best to always run the code in an empty environment.
The command set.seed(20190729) was run prior to running the code in the R Markdown file. Setting a seed ensures that any results that rely on randomness, e.g. subsampling or permutations, are reproducible.
Great job! Recording the operating system, R version, and package versions is critical for reproducibility.
Nice! There were no cached chunks for this analysis, so you can be confident that you successfully produced the results during this run.
Great job! Using relative paths to the files within your workflowr project makes it easier to run your code on other machines.
Great! You are using Git for version control. Tracking code development and connecting the code version to the results is critical for reproducibility. The version displayed above was the version of the Git repository at the time these results were generated.
Note that you need to be careful to ensure that all relevant files for the analysis have been committed to Git prior to generating the results (you can use wflow_publish or wflow_git_commit). workflowr only checks the R Markdown file, but you know if there are other scripts or data files that it depends on. Below is the status of the Git repository when the results were generated:
Ignored files:
Ignored: .Rhistory
Ignored: .Rprofile
Ignored: .Rproj.user/
Ignored: analysis/library.bib
Ignored: fun/
Ignored: output/20190810_1538/
Ignored: output/20190810_1546/
Ignored: output/20190810_1609/
Ignored: output/20190813_1044/
Ignored: output/logs/
Ignored: output/natural/
Ignored: output/nnet/
Ignored: output/svm/
Ignored: output/testRunII/
Ignored: output/testRunIII/
Ignored: packrat/lib-R/
Ignored: packrat/lib-ext/
Ignored: packrat/lib/x86_64-pc-linux-gnu/3.6.1/BH/
Ignored: packrat/lib/x86_64-pc-linux-gnu/3.6.1/FactoMineR/
Ignored: packrat/lib/x86_64-pc-linux-gnu/3.6.1/IDPmisc/
Ignored: packrat/lib/x86_64-pc-linux-gnu/3.6.1/KernSmooth/
Ignored: packrat/lib/x86_64-pc-linux-gnu/3.6.1/MASS/
Ignored: packrat/lib/x86_64-pc-linux-gnu/3.6.1/Matrix/
Ignored: packrat/lib/x86_64-pc-linux-gnu/3.6.1/MatrixModels/
Ignored: packrat/lib/x86_64-pc-linux-gnu/3.6.1/ModelMetrics/
Ignored: packrat/lib/x86_64-pc-linux-gnu/3.6.1/R6/
Ignored: packrat/lib/x86_64-pc-linux-gnu/3.6.1/RColorBrewer/
Ignored: packrat/lib/x86_64-pc-linux-gnu/3.6.1/Rcpp/
Ignored: packrat/lib/x86_64-pc-linux-gnu/3.6.1/RcppArmadillo/
Ignored: packrat/lib/x86_64-pc-linux-gnu/3.6.1/RcppEigen/
Ignored: packrat/lib/x86_64-pc-linux-gnu/3.6.1/RcppGSL/
Ignored: packrat/lib/x86_64-pc-linux-gnu/3.6.1/RcppZiggurat/
Ignored: packrat/lib/x86_64-pc-linux-gnu/3.6.1/Rfast/
Ignored: packrat/lib/x86_64-pc-linux-gnu/3.6.1/Rgtsvm/
Ignored: packrat/lib/x86_64-pc-linux-gnu/3.6.1/Rmisc/
Ignored: packrat/lib/x86_64-pc-linux-gnu/3.6.1/SQUAREM/
Ignored: packrat/lib/x86_64-pc-linux-gnu/3.6.1/SparseM/
Ignored: packrat/lib/x86_64-pc-linux-gnu/3.6.1/abind/
Ignored: packrat/lib/x86_64-pc-linux-gnu/3.6.1/askpass/
Ignored: packrat/lib/x86_64-pc-linux-gnu/3.6.1/assertthat/
Ignored: packrat/lib/x86_64-pc-linux-gnu/3.6.1/backports/
Ignored: packrat/lib/x86_64-pc-linux-gnu/3.6.1/base64enc/
Ignored: packrat/lib/x86_64-pc-linux-gnu/3.6.1/baseline/
Ignored: packrat/lib/x86_64-pc-linux-gnu/3.6.1/bit/
Ignored: packrat/lib/x86_64-pc-linux-gnu/3.6.1/bit64/
Ignored: packrat/lib/x86_64-pc-linux-gnu/3.6.1/boot/
Ignored: packrat/lib/x86_64-pc-linux-gnu/3.6.1/callr/
Ignored: packrat/lib/x86_64-pc-linux-gnu/3.6.1/car/
Ignored: packrat/lib/x86_64-pc-linux-gnu/3.6.1/carData/
Ignored: packrat/lib/x86_64-pc-linux-gnu/3.6.1/caret/
Ignored: packrat/lib/x86_64-pc-linux-gnu/3.6.1/cellranger/
Ignored: packrat/lib/x86_64-pc-linux-gnu/3.6.1/class/
Ignored: packrat/lib/x86_64-pc-linux-gnu/3.6.1/cli/
Ignored: packrat/lib/x86_64-pc-linux-gnu/3.6.1/clipr/
Ignored: packrat/lib/x86_64-pc-linux-gnu/3.6.1/cluster/
Ignored: packrat/lib/x86_64-pc-linux-gnu/3.6.1/codetools/
Ignored: packrat/lib/x86_64-pc-linux-gnu/3.6.1/colorspace/
Ignored: packrat/lib/x86_64-pc-linux-gnu/3.6.1/config/
Ignored: packrat/lib/x86_64-pc-linux-gnu/3.6.1/cowplot/
Ignored: packrat/lib/x86_64-pc-linux-gnu/3.6.1/crayon/
Ignored: packrat/lib/x86_64-pc-linux-gnu/3.6.1/crosstalk/
Ignored: packrat/lib/x86_64-pc-linux-gnu/3.6.1/curl/
Ignored: packrat/lib/x86_64-pc-linux-gnu/3.6.1/data.table/
Ignored: packrat/lib/x86_64-pc-linux-gnu/3.6.1/dendextend/
Ignored: packrat/lib/x86_64-pc-linux-gnu/3.6.1/digest/
Ignored: packrat/lib/x86_64-pc-linux-gnu/3.6.1/doParallel/
Ignored: packrat/lib/x86_64-pc-linux-gnu/3.6.1/dplyr/
Ignored: packrat/lib/x86_64-pc-linux-gnu/3.6.1/e1071/
Ignored: packrat/lib/x86_64-pc-linux-gnu/3.6.1/ellipse/
Ignored: packrat/lib/x86_64-pc-linux-gnu/3.6.1/ellipsis/
Ignored: packrat/lib/x86_64-pc-linux-gnu/3.6.1/evaluate/
Ignored: packrat/lib/x86_64-pc-linux-gnu/3.6.1/factoextra/
Ignored: packrat/lib/x86_64-pc-linux-gnu/3.6.1/fansi/
Ignored: packrat/lib/x86_64-pc-linux-gnu/3.6.1/flashClust/
Ignored: packrat/lib/x86_64-pc-linux-gnu/3.6.1/forcats/
Ignored: packrat/lib/x86_64-pc-linux-gnu/3.6.1/foreach/
Ignored: packrat/lib/x86_64-pc-linux-gnu/3.6.1/foreign/
Ignored: packrat/lib/x86_64-pc-linux-gnu/3.6.1/fs/
Ignored: packrat/lib/x86_64-pc-linux-gnu/3.6.1/generics/
Ignored: packrat/lib/x86_64-pc-linux-gnu/3.6.1/getPass/
Ignored: packrat/lib/x86_64-pc-linux-gnu/3.6.1/ggplot2/
Ignored: packrat/lib/x86_64-pc-linux-gnu/3.6.1/ggpubr/
Ignored: packrat/lib/x86_64-pc-linux-gnu/3.6.1/ggrepel/
Ignored: packrat/lib/x86_64-pc-linux-gnu/3.6.1/ggsci/
Ignored: packrat/lib/x86_64-pc-linux-gnu/3.6.1/ggsignif/
Ignored: packrat/lib/x86_64-pc-linux-gnu/3.6.1/git2r/
Ignored: packrat/lib/x86_64-pc-linux-gnu/3.6.1/glue/
Ignored: packrat/lib/x86_64-pc-linux-gnu/3.6.1/gower/
Ignored: packrat/lib/x86_64-pc-linux-gnu/3.6.1/gridExtra/
Ignored: packrat/lib/x86_64-pc-linux-gnu/3.6.1/gtable/
Ignored: packrat/lib/x86_64-pc-linux-gnu/3.6.1/haven/
Ignored: packrat/lib/x86_64-pc-linux-gnu/3.6.1/hexbin/
Ignored: packrat/lib/x86_64-pc-linux-gnu/3.6.1/highr/
Ignored: packrat/lib/x86_64-pc-linux-gnu/3.6.1/hms/
Ignored: packrat/lib/x86_64-pc-linux-gnu/3.6.1/htmltools/
Ignored: packrat/lib/x86_64-pc-linux-gnu/3.6.1/htmlwidgets/
Ignored: packrat/lib/x86_64-pc-linux-gnu/3.6.1/httpuv/
Ignored: packrat/lib/x86_64-pc-linux-gnu/3.6.1/httr/
Ignored: packrat/lib/x86_64-pc-linux-gnu/3.6.1/ipred/
Ignored: packrat/lib/x86_64-pc-linux-gnu/3.6.1/iterators/
Ignored: packrat/lib/x86_64-pc-linux-gnu/3.6.1/jsonlite/
Ignored: packrat/lib/x86_64-pc-linux-gnu/3.6.1/keras/
Ignored: packrat/lib/x86_64-pc-linux-gnu/3.6.1/kerasR/
Ignored: packrat/lib/x86_64-pc-linux-gnu/3.6.1/knitr/
Ignored: packrat/lib/x86_64-pc-linux-gnu/3.6.1/labeling/
Ignored: packrat/lib/x86_64-pc-linux-gnu/3.6.1/later/
Ignored: packrat/lib/x86_64-pc-linux-gnu/3.6.1/lattice/
Ignored: packrat/lib/x86_64-pc-linux-gnu/3.6.1/lava/
Ignored: packrat/lib/x86_64-pc-linux-gnu/3.6.1/lazyeval/
Ignored: packrat/lib/x86_64-pc-linux-gnu/3.6.1/leaps/
Ignored: packrat/lib/x86_64-pc-linux-gnu/3.6.1/lme4/
Ignored: packrat/lib/x86_64-pc-linux-gnu/3.6.1/lubridate/
Ignored: packrat/lib/x86_64-pc-linux-gnu/3.6.1/magrittr/
Ignored: packrat/lib/x86_64-pc-linux-gnu/3.6.1/maptools/
Ignored: packrat/lib/x86_64-pc-linux-gnu/3.6.1/markdown/
Ignored: packrat/lib/x86_64-pc-linux-gnu/3.6.1/mgcv/
Ignored: packrat/lib/x86_64-pc-linux-gnu/3.6.1/mime/
Ignored: packrat/lib/x86_64-pc-linux-gnu/3.6.1/minqa/
Ignored: packrat/lib/x86_64-pc-linux-gnu/3.6.1/munsell/
Ignored: packrat/lib/x86_64-pc-linux-gnu/3.6.1/nlme/
Ignored: packrat/lib/x86_64-pc-linux-gnu/3.6.1/nloptr/
Ignored: packrat/lib/x86_64-pc-linux-gnu/3.6.1/nnet/
Ignored: packrat/lib/x86_64-pc-linux-gnu/3.6.1/numDeriv/
Ignored: packrat/lib/x86_64-pc-linux-gnu/3.6.1/openssl/
Ignored: packrat/lib/x86_64-pc-linux-gnu/3.6.1/openxlsx/
Ignored: packrat/lib/x86_64-pc-linux-gnu/3.6.1/packrat/tests/
Ignored: packrat/lib/x86_64-pc-linux-gnu/3.6.1/pbkrtest/
Ignored: packrat/lib/x86_64-pc-linux-gnu/3.6.1/pillar/
Ignored: packrat/lib/x86_64-pc-linux-gnu/3.6.1/pkgconfig/
Ignored: packrat/lib/x86_64-pc-linux-gnu/3.6.1/plogr/
Ignored: packrat/lib/x86_64-pc-linux-gnu/3.6.1/plotly/
Ignored: packrat/lib/x86_64-pc-linux-gnu/3.6.1/plyr/
Ignored: packrat/lib/x86_64-pc-linux-gnu/3.6.1/polynom/
Ignored: packrat/lib/x86_64-pc-linux-gnu/3.6.1/prettyunits/
Ignored: packrat/lib/x86_64-pc-linux-gnu/3.6.1/processx/
Ignored: packrat/lib/x86_64-pc-linux-gnu/3.6.1/prodlim/
Ignored: packrat/lib/x86_64-pc-linux-gnu/3.6.1/progress/
Ignored: packrat/lib/x86_64-pc-linux-gnu/3.6.1/promises/
Ignored: packrat/lib/x86_64-pc-linux-gnu/3.6.1/prospectr/
Ignored: packrat/lib/x86_64-pc-linux-gnu/3.6.1/ps/
Ignored: packrat/lib/x86_64-pc-linux-gnu/3.6.1/purrr/
Ignored: packrat/lib/x86_64-pc-linux-gnu/3.6.1/quantreg/
Ignored: packrat/lib/x86_64-pc-linux-gnu/3.6.1/randomForest/
Ignored: packrat/lib/x86_64-pc-linux-gnu/3.6.1/readr/
Ignored: packrat/lib/x86_64-pc-linux-gnu/3.6.1/readxl/
Ignored: packrat/lib/x86_64-pc-linux-gnu/3.6.1/recipes/
Ignored: packrat/lib/x86_64-pc-linux-gnu/3.6.1/rematch/
Ignored: packrat/lib/x86_64-pc-linux-gnu/3.6.1/reshape2/
Ignored: packrat/lib/x86_64-pc-linux-gnu/3.6.1/reticulate/
Ignored: packrat/lib/x86_64-pc-linux-gnu/3.6.1/rio/
Ignored: packrat/lib/x86_64-pc-linux-gnu/3.6.1/rlang/
Ignored: packrat/lib/x86_64-pc-linux-gnu/3.6.1/rmarkdown/
Ignored: packrat/lib/x86_64-pc-linux-gnu/3.6.1/rpart/
Ignored: packrat/lib/x86_64-pc-linux-gnu/3.6.1/rprojroot/
Ignored: packrat/lib/x86_64-pc-linux-gnu/3.6.1/rstudioapi/
Ignored: packrat/lib/x86_64-pc-linux-gnu/3.6.1/scales/
Ignored: packrat/lib/x86_64-pc-linux-gnu/3.6.1/scatterplot3d/
Ignored: packrat/lib/x86_64-pc-linux-gnu/3.6.1/shiny/
Ignored: packrat/lib/x86_64-pc-linux-gnu/3.6.1/sourcetools/
Ignored: packrat/lib/x86_64-pc-linux-gnu/3.6.1/sp/
Ignored: packrat/lib/x86_64-pc-linux-gnu/3.6.1/stringi/
Ignored: packrat/lib/x86_64-pc-linux-gnu/3.6.1/stringr/
Ignored: packrat/lib/x86_64-pc-linux-gnu/3.6.1/survival/
Ignored: packrat/lib/x86_64-pc-linux-gnu/3.6.1/sys/
Ignored: packrat/lib/x86_64-pc-linux-gnu/3.6.1/tensorflow/
Ignored: packrat/lib/x86_64-pc-linux-gnu/3.6.1/tfruns/
Ignored: packrat/lib/x86_64-pc-linux-gnu/3.6.1/tibble/
Ignored: packrat/lib/x86_64-pc-linux-gnu/3.6.1/tidyr/
Ignored: packrat/lib/x86_64-pc-linux-gnu/3.6.1/tidyselect/
Ignored: packrat/lib/x86_64-pc-linux-gnu/3.6.1/timeDate/
Ignored: packrat/lib/x86_64-pc-linux-gnu/3.6.1/tinytex/
Ignored: packrat/lib/x86_64-pc-linux-gnu/3.6.1/utf8/
Ignored: packrat/lib/x86_64-pc-linux-gnu/3.6.1/vctrs/
Ignored: packrat/lib/x86_64-pc-linux-gnu/3.6.1/viridis/
Ignored: packrat/lib/x86_64-pc-linux-gnu/3.6.1/viridisLite/
Ignored: packrat/lib/x86_64-pc-linux-gnu/3.6.1/whisker/
Ignored: packrat/lib/x86_64-pc-linux-gnu/3.6.1/withr/
Ignored: packrat/lib/x86_64-pc-linux-gnu/3.6.1/workflowr/
Ignored: packrat/lib/x86_64-pc-linux-gnu/3.6.1/xfun/
Ignored: packrat/lib/x86_64-pc-linux-gnu/3.6.1/xtable/
Ignored: packrat/lib/x86_64-pc-linux-gnu/3.6.1/yaml/
Ignored: packrat/lib/x86_64-pc-linux-gnu/3.6.1/zeallot/
Ignored: packrat/lib/x86_64-pc-linux-gnu/3.6.1/zip/
Ignored: packrat/src/
Ignored: polymeRID.Rproj
Ignored: smp/20190812_1723_NNET/files/
Ignored: smp/20190812_1723_NNET/plots/
Ignored: smp/20190812_1729_NNET/files/
Ignored: smp/20190812_1729_NNET/plots/
Ignored: smp/20190812_1731_NNET/files/
Ignored: smp/20190812_1731_NNET/plots/
Ignored: smp/20190812_1733_NNET/files/
Ignored: smp/20190812_1733_NNET/plots/
Ignored: website/
Note that any generated files, e.g. HTML, png, CSS, etc., are not included in this status report because it is ok for generated content to have uncommitted changes.
These are the previous versions of the R Markdown and HTML files. If you’ve configured a remote Git repository (see ?wflow_git_remote), click on the hyperlinks in the table below to view them.
| File | Version | Author | Date | Message |
|---|---|---|---|---|
| html | 2385fbc | goergen95 | 2019-08-14 | republish for layout change |
| Rmd | 5d28ce0 | goergen95 | 2019-08-14 | changed citation note |
| html | 5d28ce0 | goergen95 | 2019-08-14 | changed citation note |
| Rmd | afd89c2 | goergen95 | 2019-08-14 | fixed error in preparation concering FUR class |
| html | afd89c2 | goergen95 | 2019-08-14 | fixed error in preparation concering FUR class |
| Rmd | c3f088e | goergen95 | 2019-08-13 | started exploration tab |
| html | c3f088e | goergen95 | 2019-08-13 | started exploration tab |
| html | c52182b | goergen95 | 2019-08-13 | rebuid website |
| html | 6e92d01 | goergen95 | 2019-08-13 | Build site. |
| Rmd | 9ca3d89 | goergen95 | 2019-08-13 | added website directory mirror |
| html | 9ca3d89 | goergen95 | 2019-08-13 | added website directory mirror |
| html | 6cfd689 | goergen95 | 2019-08-13 | Build site. |
| Rmd | 5774923 | goergen95 | 2019-08-13 | included preparation |
For the current project we used a data base published by Primpke et al. (2018) online. The data base can be downloaded here. The authors state the samples were collected based on the FTIR-spectrometer Bruker Tensor 27 System for the spectral range 4000 to 40 1/cm. Additionally, some data of polymer-based fibers and spectra of biological origins were received from the Bremer Faserinstitut. During preprocessing, they applied a concave rubberband correction based on 10 iterations and 64 baseline points. They also excluded the C02 band between 2420 to 2200 1/cm by setting the data points to 0. This should be kept in mind, since the inclusion of additional reference samples requires the same procedure for the data base to stay in a consistent state. The data provided by Primpke et al. (2018) shows a spectral resolution of 2.1 1/cm. Additional reference samples need be resampled to the same spectral resolution.
To ensure this, the data base was read into R and the wave number index was saved in a separate file for future use.
library(openxlsx)
url = "https://static-content.springer.com/esm/art%3A10.1007%2Fs00216-018-1156-x/MediaObjects/216_2018_1156_MOESM2_ESM.xlsx"
data = openxlsx::read.xlsx(url)
# extract wavenumbers from first row
wavenumbers = as.numeric(names(data)[2:1864])
# saving wavenumbers to reference sample directory
saveRDS(wavenumbers, paste0(ref, "wavenumbers.rds"))We can take a look at the distribution of the different classes found in the data base. Here, I only print the 20 most common classes since there are a lot of reference samples only found once.
data$Abbreviation = as.factor(data$Abbreviation)
summary(data$Abbreviation)[1:10] PES PP LDPE HDPE PET PE Nylon PA PS PUR
15 12 11 10 9 8 7 7 7 7 Because we are interested in assigning the right class to potential plastic particles, the most important classes found in the data base to us are the ones of artificial origin. However, sometimes also particles of biological origins are subject to spectral analysis, because they resemble the appearance of micro plastics. Any machine learning algorithm trained only with reference samples from plastics would eventually assign a plastic class also to the particles of biological origin. To reduce the error of false positives, we include some of the samples of biological origin based on broad classes.
# furs and wools
indexFur = grep("fur", data$Abbreviation)
indexWool = grep("wool", data$Abbreviation)
furs = data[c(indexFur, indexWool), ]
furs = furs[ , c(2:1864)] # leave out index column
names(furs) = paste("wvn", wavenumbers, sep="")
furs$class = "FUR"
# fibres
indexFibre = grep("fibre", data$Abbreviation)
fibre = data[indexFibre, ]
fibre = fibre[ , c(2:1864)] # leave out index column
names(fibre) = paste("wvn", wavenumbers, sep="")
fibre$class = "FIBRE"
# wood
indexWood = grep("wood", data$Abbreviation)
wood = data[indexWood, ]
wood = wood[ , c(2:1864)] # leave out index colums
names(wood) = paste("wvn", wavenumbers, sep="")
wood$class = "WOOD"
# synthetic polymers
polyIndex = which(data$`Natural./Synthetic` =="synthetic polymer")
syntPolymer = data[polyIndex,]
counts = summary(syntPolymer$Abbreviation)
polyNames = names(counts)[1:10] # only major polymers
syntPolymer = syntPolymer[which(syntPolymer$Abbreviation %in% polyNames) , ]
classes = droplevels(syntPolymer$Abbreviation)
syntPolymer = syntPolymer[ , c(2:1864)] # leave out index column
names(syntPolymer) = paste("wvn",wavenumbers,sep="")
syntPolymer$class = as.character(classes)
# lets group together some synthetic polymer classes
syntPolymer$class[grep("Nylon",syntPolymer$class)] = "PA"We can now bind the reference samples together and take a look at the distribution of classes in the resulting data frame.
data = rbind(furs,wood,fibre,syntPolymer)
data$class = as.factor(data$class)
summary(data$class)FIBRE FUR HDPE LDPE PA PE PES PET PP PS PUR WOOD
27 23 10 11 14 8 15 9 12 7 7 4 We see that we have in total 93 (53%) reference samples of plastic polymers and 44 (47%) of biological origin. Within the plastic samples, we find that the data is very balanced with no single class showing less than 7 samples. For the samples of biological origin, however, the class fiber dominates the class distribution. This could prove as an disadvantage if a machine learning algorithm picks up this unbalance by minimizing its error rate simply by more frequently predicting the fiber class. At this point, we will leave the resulting data base as it is and save it to disk. We save the data in individual files as well as in a comprehensive data base in csv format. This way we ensure that later extensions to the data base easily to manage.
write.csv(data, file = paste0(ref, "reference_database.csv"), row.names=FALSE)
# writing class control file
classIndex = as.character(unique(data$class))
for (class in classIndex){
tmp = data[data$class==class , ]
write.csv(tmp, file = paste0(ref, "reference_", class, ".csv"), row.names=FALSE)
}
write(classIndex, paste0(ref, "classes.txt"))Primpke, Sebastian, Marisa Wirth, Claudia Lorenz, and Gunnar Gerdts. 2018. “Reference database design for the automated analysis of microplastic samples based on Fourier transform infrared (FTIR) spectroscopy.” Analytical and Bioanalytical Chemistry 410 (21). Analytical; Bioanalytical Chemistry: 5131–41. https://doi.org/10.1007/s00216-018-1156-x.
sessionInfo()R version 3.6.1 (2019-07-05)
Platform: x86_64-pc-linux-gnu (64-bit)
Running under: Linux Mint 19.1
Matrix products: default
BLAS: /usr/lib/x86_64-linux-gnu/blas/libblas.so.3.7.1
LAPACK: /usr/lib/x86_64-linux-gnu/lapack/liblapack.so.3.7.1
locale:
[1] LC_CTYPE=en_US.UTF-8 LC_NUMERIC=C
[3] LC_TIME=en_US.UTF-8 LC_COLLATE=en_US.UTF-8
[5] LC_MONETARY=de_DE.UTF-8 LC_MESSAGES=en_US.UTF-8
[7] LC_PAPER=de_DE.UTF-8 LC_NAME=C
[9] LC_ADDRESS=C LC_TELEPHONE=C
[11] LC_MEASUREMENT=de_DE.UTF-8 LC_IDENTIFICATION=C
attached base packages:
[1] stats graphics grDevices utils datasets methods base
other attached packages:
[1] tensorflow_1.14.0 abind_1.4-5
[3] e1071_1.7-2 keras_2.2.4.1
[5] workflowr_1.4.0.9001 baseline_1.2-1
[7] gridExtra_2.3 stringr_1.4.0
[9] prospectr_0.1.3 RcppArmadillo_0.9.600.4.0
[11] openxlsx_4.1.0.1 magrittr_1.5
[13] ggplot2_3.2.0 reshape2_1.4.3
[15] dplyr_0.8.3
loaded via a namespace (and not attached):
[1] reticulate_1.13 tidyselect_0.2.5 xfun_0.8 purrr_0.3.2
[5] lattice_0.20-38 colorspace_1.4-1 generics_0.0.2 htmltools_0.3.6
[9] yaml_2.2.0 base64enc_0.1-3 rlang_0.4.0 pillar_1.4.2
[13] glue_1.3.1 withr_2.1.2 foreach_1.4.7 plyr_1.8.4
[17] munsell_0.5.0 gtable_0.3.0 zip_2.0.3 codetools_0.2-16
[21] evaluate_0.14 knitr_1.24 SparseM_1.77 tfruns_1.4
[25] class_7.3-15 Rcpp_1.0.2 scales_1.0.0 backports_1.1.4
[29] jsonlite_1.6 fs_1.3.1 digest_0.6.20 stringi_1.4.3
[33] grid_3.6.1 rprojroot_1.3-2 tools_3.6.1 lazyeval_0.2.2
[37] tibble_2.1.3 crayon_1.3.4 whisker_0.3-2 pkgconfig_2.0.2
[41] zeallot_0.1.0 Matrix_1.2-17 assertthat_0.2.1 rmarkdown_1.14
[45] iterators_1.0.12 R6_2.4.0 git2r_0.26.1 compiler_3.6.1