Last updated: 2021-02-08

Checks: 7 0

Knit directory: BloomSail/

This reproducible R Markdown analysis was created with workflowr (version 1.6.2). The Checks tab describes the reproducibility checks that were applied when the results were created. The Past versions tab lists the development history.


Great! Since the R Markdown file has been committed to the Git repository, you know the exact version of the code that produced these results.

Great job! The global environment was empty. Objects defined in the global environment can affect the analysis in your R Markdown file in unknown ways. For reproduciblity it’s best to always run the code in an empty environment.

The command set.seed(20191021) was run prior to running the code in the R Markdown file. Setting a seed ensures that any results that rely on randomness, e.g. subsampling or permutations, are reproducible.

Great job! Recording the operating system, R version, and package versions is critical for reproducibility.

Nice! There were no cached chunks for this analysis, so you can be confident that you successfully produced the results during this run.

Great job! Using relative paths to the files within your workflowr project makes it easier to run your code on other machines.

Great! You are using Git for version control. Tracking code development and connecting the code version to the results is critical for reproducibility.

The results in this page were generated with repository version f977014. See the Past versions tab to see a history of the changes made to the R Markdown and HTML files.

Note that you need to be careful to ensure that all relevant files for the analysis have been committed to Git prior to generating the results (you can use wflow_publish or wflow_git_commit). workflowr only checks the R Markdown file, but you know if there are other scripts or data files that it depends on. Below is the status of the Git repository when the results were generated:


Ignored files:
    Ignored:    .Rhistory
    Ignored:    .Rproj.user/
    Ignored:    data/input/
    Ignored:    data/intermediate/
    Ignored:    data/output_submission/
    Ignored:    output/Plots/Figures_publication/.tmp.drivedownload/

Untracked files:
    Untracked:  output/Plots/Figures_publication/Appendix/

Note that any generated files, e.g. HTML, png, CSS, etc., are not included in this status report because it is ok for generated content to have uncommitted changes.


These are the previous versions of the repository in which changes were made to the R Markdown (analysis/nomenclature.Rmd) and HTML (docs/nomenclature.html) files. If you’ve configured a remote Git repository (see ?wflow_git_remote), click on the hyperlinks in the table below to view the files as they were in that past version.

File Version Author Date Message
Rmd f977014 jens-daniel-mueller 2021-02-08 code and output cleaning
html c5fc34c jens-daniel-mueller 2021-01-22 Build site.
html 4277235 jens-daniel-mueller 2021-01-05 Build site.
html 41e3c63 jens-daniel-mueller 2020-11-06 Build site.
Rmd 6f7ada2 jens-daniel-mueller 2020-11-06 Included count of all profiles
html 9a3f42a jens-daniel-mueller 2020-10-24 Build site.
html 05248bf jens-daniel-mueller 2020-10-20 Build site.
html 1c4fe8e jens-daniel-mueller 2020-10-20 table with time series in depth intervals added
html 6896725 jens-daniel-mueller 2020-10-01 Build site.
html 9f66019 jens-daniel-mueller 2020-10-01 Build site.
html 27c5431 jens-daniel-mueller 2020-09-29 Build site.
html 1d01685 jens-daniel-mueller 2020-09-28 Build site.
html 1278900 jens-daniel-mueller 2020-09-25 Build site.
html 904f0f7 jens-daniel-mueller 2020-09-23 Build site.
html 603af23 jens-daniel-mueller 2020-05-25 Build site.
html 3414c23 jens-daniel-mueller 2020-05-25 Build site.
html 4c4a849 jens-daniel-mueller 2020-05-08 Build site.
Rmd 85241e5 jens-daniel-mueller 2020-05-08 replaced CT by nCT
html 3832733 jens-daniel-mueller 2020-04-30 Build site.
Rmd 4f4ab08 jens-daniel-mueller 2020-04-30 harmonized code until RT determination
html 1b6480f jens-daniel-mueller 2020-04-30 Build site.
Rmd fe72316 jens-daniel-mueller 2020-04-30 revised variable and object names, used temp-dependent tau only, rerun code
html 6465570 jens-daniel-mueller 2020-04-29 Build site.
Rmd 0bbf0e6 jens-daniel-mueller 2020-04-29 revised nomenclature
html d9248a6 jens-daniel-mueller 2020-04-29 Build site.
Rmd 70bd3f0 jens-daniel-mueller 2020-04-29 correct interpolation, new d pco2 plot
html 57f7231 jens-daniel-mueller 2020-04-28 Build site.
Rmd 5ebd364 jens-daniel-mueller 2020-04-28 revised
html b5722a7 jens-daniel-mueller 2020-04-28 Build site.
Rmd 058c709 jens-daniel-mueller 2020-04-28 Moved nomenlacture to seperate Rmd

Throughout this analysis, the following naming conventions for objects (data sets) and variables are used.

1 Nomenclature of objects and data sets

The following names should be identical for stored files and objects in R environment

  • source

    • tx: data recorded on SV Tina V, where x stands for:

      • s: Sea-Bird SBE 16 sensor
      • h: Contros HydroC CO2 sensor
      • t: track data (coordinates + timestamp)
      • m: ts + th + tt merged (variables within tm are interpolated to a common time stamp)
      • b: discrete bottle samples
    • fm: data recorded on SOOP Finnmaid

    • og: data recorded on Ostergarnsholm ICOS flux tower

    • gt: GETM (high-res huydographical model)

    • mp: bathymetric map

  • subsetting and modification levels

    • profiles vs surface: operation mode SV Tina V
    • ID: mean values for cruise (reduced temporal resolution)
    • daily: daily mean values
    • long: data stored in long format (all observations in only 2 columns “var” and “value”)
    • fix: constant, unique values such as long-term means, starting dates, etc
    • iCT: includes cumulative numbers as iCT estimates
    • NCP: includes cumulative numbers as NCP estimates
    • CT_tem: data subset to analyse changes of CT with tem
    • 3d vs 2d: surface vs depth resolved GETM data

2 Nomenclature of variables

  • Descriptive variables

    • date
    • date_time
    • date_time_ID: mean date of cruise
    • date_time_ID_diff: time differences in between cruises
    • date_time_ID_ref: mean date in between cruises corresponding to observed incremental changes
    • station
    • ID: character identifying starting date of cruise as YYMMDD
    • dep: 1m depth intervals
    • lat
    • lon
    • deployment
    • Zero: Zeroing period of HydroC Sensor
    • Flush: Period following zero, reading recovers to ambient value
    • mixing: Two phases of the Flush period
  • Observed variables: column names, or identifier in column “var” for long-format tables

    • pCO2: partial pressure of carbon dioxide, with following postfix indicating manipulation level

      • _analog: analog HydroC signal recorded on SeaBird CTD
      • _raw: HydroC signal recorded internally
      • _corr: pCO2_raw postprocessed by manufacturer
      • _equi: pCO2_corr at the end of an in-water equilibration period at constant depth
      • _RT: Response time corrected pCO2_corr
      • _RT_mean: running mean of pCO2_RT
      • none: pCO2_RT_mean gridded to regular depth levels
    • sal

    • tem

    • nCT: CT normalized to AT, or calculated from pCO2, temperature, and fixed AT, S (please note that this variable is referred to as CT* in the accompanying manuscript)

    • CT: Measured dissolved inorganic carbon

    • AT: Measured total alkalinity

    • U10: wind speed at 10m

    • mld: mixed or mixing layer depth

  • Variable name extension

    • mean: mean value
    • sd: standard deviation
    • min: min value
    • max: max value
    • int: interpolated value
    • grid: value gridded to a coarser resolution
    • diff: difference to previous value
    • diff_daily: difference to previous value divided by number of days
    • delta: offset from an alternative estimate of the same parameter
    • i: intergrated over depth
    • cum: cumulative value over time
    • sign: identifier for pos. or neg. differences
    • rel: relative to some absolute value
  • p_XXX: ggplot object

3 Code chunk labelling

  • read_: read data
  • calc_: perform calculations, mutate variables, etc
  • chunks for plotting are labeled according to plot content, because name controls plot file name

4 ToD0

Github repo Explain subsetting of deployments Explain metadata creation

CT dynamics Map data preparation in read-in file

Reconstruction fm + gt in read_in und merging section implement exact subsetting coordinated for getm data


sessionInfo()
R version 4.0.3 (2020-10-10)
Platform: x86_64-w64-mingw32/x64 (64-bit)
Running under: Windows 10 x64 (build 18363)

Matrix products: default

locale:
[1] LC_COLLATE=English_Germany.1252  LC_CTYPE=English_Germany.1252   
[3] LC_MONETARY=English_Germany.1252 LC_NUMERIC=C                    
[5] LC_TIME=English_Germany.1252    

attached base packages:
[1] stats     graphics  grDevices utils     datasets  methods   base     

other attached packages:
[1] workflowr_1.6.2

loaded via a namespace (and not attached):
 [1] Rcpp_1.0.5      rstudioapi_0.13 whisker_0.4     knitr_1.30     
 [5] magrittr_2.0.1  R6_2.5.0        rlang_0.4.10    stringr_1.4.0  
 [9] tools_4.0.3     xfun_0.19       git2r_0.27.1    htmltools_0.5.0
[13] ellipsis_0.3.1  rprojroot_2.0.2 yaml_2.2.1      digest_0.6.27  
[17] tibble_3.0.4    lifecycle_0.2.0 crayon_1.3.4    later_1.1.0.1  
[21] vctrs_0.3.6     promises_1.1.1  fs_1.5.0        glue_1.4.2     
[25] evaluate_0.14   rmarkdown_2.6   stringi_1.5.3   compiler_4.0.3 
[29] pillar_1.4.7    httpuv_1.5.4    pkgconfig_2.0.3