Last updated: 2021-02-11
Checks: 7 0
Knit directory: BloomSail/
This reproducible R Markdown analysis was created with workflowr (version 1.6.2). The Checks tab describes the reproducibility checks that were applied when the results were created. The Past versions tab lists the development history.
Great! Since the R Markdown file has been committed to the Git repository, you know the exact version of the code that produced these results.
Great job! The global environment was empty. Objects defined in the global environment can affect the analysis in your R Markdown file in unknown ways. For reproduciblity it’s best to always run the code in an empty environment.
The command set.seed(20191021) was run prior to running the code in the R Markdown file. Setting a seed ensures that any results that rely on randomness, e.g. subsampling or permutations, are reproducible.
Great job! Recording the operating system, R version, and package versions is critical for reproducibility.
Nice! There were no cached chunks for this analysis, so you can be confident that you successfully produced the results during this run.
Great job! Using relative paths to the files within your workflowr project makes it easier to run your code on other machines.
Great! You are using Git for version control. Tracking code development and connecting the code version to the results is critical for reproducibility.
The results in this page were generated with repository version 4bdeb1f. See the Past versions tab to see a history of the changes made to the R Markdown and HTML files.
Note that you need to be careful to ensure that all relevant files for the analysis have been committed to Git prior to generating the results (you can use wflow_publish or wflow_git_commit). workflowr only checks the R Markdown file, but you know if there are other scripts or data files that it depends on. Below is the status of the Git repository when the results were generated:
Ignored files:
Ignored: .Rhistory
Ignored: .Rproj.user/
Ignored: data/
Ignored: output/Plots/Figures_publication/.tmp.drivedownload/
Untracked files:
Untracked: output/Plots/response_time/all_plots.pdf
Untracked: output/Plots/response_time/profiles_pCO2.pdf
Untracked: output/Plots/response_time/profiles_pCO2_delta_grid.pdf
Untracked: output/Plots/response_time/profiles_pCO2_delta_rel_grid.pdf
Untracked: output/Plots/response_time/profiles_pCO2_grid.pdf
Untracked: output/Plots/response_time/time_series_depth_pCO2_corr_by_profile.pdf
Unstaged changes:
Deleted: analysis/CT_dynamics.Rmd
Modified: analysis/_site.yml
Modified: code/Workflowr_project_managment.R
Modified: output/Plots/Figures_publication/Appendix/Fig_A1.pdf
Modified: output/Plots/Figures_publication/Appendix/Fig_A1.png
Modified: output/Plots/Figures_publication/Appendix/Fig_A2.pdf
Modified: output/Plots/Figures_publication/Appendix/Fig_B1.pdf
Modified: output/Plots/Figures_publication/Appendix/Fig_B2.pdf
Modified: output/Plots/Figures_publication/Appendix/Fig_C1.pdf
Modified: output/Plots/Figures_publication/Appendix/Fig_C2.pdf
Modified: output/Plots/Figures_publication/Appendix/Fig_C3.pdf
Modified: output/Plots/Figures_publication/Appendix/Fig_C4.pdf
Modified: output/Plots/Figures_publication/Article/Fig_1.pdf
Modified: output/Plots/Figures_publication/Article/Fig_2.pdf
Modified: output/Plots/Figures_publication/Article/Fig_3.pdf
Modified: output/Plots/Figures_publication/Article/Fig_4.pdf
Modified: output/Plots/Figures_publication/Article/Fig_5.pdf
Modified: output/Plots/response_time/tau_determination_pCO2_corr_flushperiods_nls.pdf
Note that any generated files, e.g. HTML, png, CSS, etc., are not included in this status report because it is ok for generated content to have uncommitted changes.
These are the previous versions of the repository in which changes were made to the R Markdown (analysis/parameterization.Rmd) and HTML (docs/parameterization.html) files. If you’ve configured a remote Git repository (see ?wflow_git_remote), click on the hyperlinks in the table below to view the files as they were in that past version.
| File | Version | Author | Date | Message |
|---|---|---|---|---|
| html | 7d39e0b | jens-daniel-mueller | 2021-02-11 | Build site. |
| Rmd | e9b363c | jens-daniel-mueller | 2021-02-11 | cleaning |
| html | 8051798 | jens-daniel-mueller | 2021-02-10 | Build site. |
| html | 97d6322 | jens-daniel-mueller | 2021-02-08 | Build site. |
| Rmd | b6593a4 | jens-daniel-mueller | 2021-02-08 | code and output cleaning |
| html | a2a4a78 | jens-daniel-mueller | 2021-02-08 | Build site. |
| Rmd | 6df1eac | jens-daniel-mueller | 2021-02-08 | code and output cleaning |
| html | cc7009b | jens-daniel-mueller | 2021-02-08 | Build site. |
| Rmd | 3cd1aab | jens-daniel-mueller | 2021-02-08 | code and output cleaning |
| html | c5fc34c | jens-daniel-mueller | 2021-01-22 | Build site. |
| html | 4277235 | jens-daniel-mueller | 2021-01-05 | Build site. |
| html | 9a3f42a | jens-daniel-mueller | 2020-10-24 | Build site. |
| html | 05248bf | jens-daniel-mueller | 2020-10-20 | Build site. |
| html | 1c4fe8e | jens-daniel-mueller | 2020-10-20 | table with time series in depth intervals added |
| html | 1a55550 | jens-daniel-mueller | 2020-10-13 | Build site. |
| Rmd | bdf7a94 | jens-daniel-mueller | 2020-10-13 | define RT stats criteria in parameterization |
| html | bd752e7 | jens-daniel-mueller | 2020-10-13 | Build site. |
| Rmd | 52ffb5e | jens-daniel-mueller | 2020-10-13 | knit parameterization without kable |
| html | 83e827d | jens-daniel-mueller | 2020-10-13 | Build site. |
| Rmd | 2c35703 | jens-daniel-mueller | 2020-10-13 | knit parameterization with kable |
| html | 6896725 | jens-daniel-mueller | 2020-10-01 | Build site. |
| html | 9f66019 | jens-daniel-mueller | 2020-10-01 | Build site. |
| html | 27c5431 | jens-daniel-mueller | 2020-09-29 | Build site. |
| Rmd | 2e0f902 | jens-daniel-mueller | 2020-09-29 | all parameters separate, rebuild |
library(tidyverse)
library(lubridate)Following parameterizations were are saved to an .rds file and will be used to run analysis and display results:
parameters <-
lst(
# flush duration after zeroing of the HydroC pCO2 sensor
HC_flush_duration = 600,
# mixing duration after zeroing of the HydroC pCO2 sensor
HC_mixing_duration = 20,
# date of switching between 1W- and 8W- pump
pump_switch = ymd_hms("2018-07-17;13:08:34"),
# duration of intervals to be used for tau determination
duration_intervals = seq(150,500,50),
# pCO2 residual limit for tau determination
pCO2_resid_lim = 1,
# window width in seconds used to smooth RT corrected pCO2
smoothing_duration = 30,
# scaling factors used to test optimization of tau determination
tau_factors = seq(0.8, 1.6, 0.2),
# scaling factor used to optimize tau
tau_factor_used = 1,
# ID used to produce example plots
example_ID = "180802",
# station used to produce example plots
example_station = "P03",
# width for vertical gridding of profiles
dep_grid = 1,
# max depth for data analysis
max_dep = 25,
# max depth for checking of data gaps
max_dep_gap = 20,
# max number of accepted data gaps
max_gap = 3,
# max depth threshold for entire profile to be included in RT quality assessment
RT_stats_dep_max = 30,
# max pCO2 for RT quality assessment
RT_stats_pCO2_max = 300,
# max sampling depth included for RT quality assessment
RT_stats_dep = 20,
# max depth considered for surface data
surface_dep = 6,
# integration depths tested for NCP quantification
fixed_integration_depths = seq(9,13,1),
# integration depth for NCP quantification
i_dep_lim = 12,
# maximum depth of vertical mixing event
i_dep_mix_lim = 17,
# stations not used in this study
stations_out = c("PX1", "PX2", "P14", "P13", "P01"),
# cruise dates not used in this study
dates_out = c("180616","180820"),
# profiling phases used for quality assessment and analysis
phases_in = c("down", "up"),
# box limits for inclusion of SOOP Finnmaid data
fm_box_lon = c(18.9, 19.5, 19.5, 18.9),
fm_box_lat = c(57.4, 57.2, 57.45, 57.61),
# box limits for map
map_lat_lo = 57.25,
map_lat_hi = 57.6,
map_lon_lo = 18.6,
map_lon_hi = 19.7,
# coordinates of Herrvik harbor
herrvik_lat = 57.421658,
herrvik_lon = 18.914558,
# coordinates of ICOS flux tower on Ostergarnsholm
ostergarn_lat = 57.430544,
ostergarn_lon = 18.984387,
# stations used for analysis of phytoplankton data
stations_in_phytoplankton = c("P07", "P10"),
# class of phytoplanktion data used
class_in_phytoplankton = "t",
# Finnmaid standard route ("E" or "W") used to select GETM model output
getm_select_route = "E",
# latitude limits for subsetting of GETM model data
getm_low_lat = 57.3,
getm_high_lat = 57.5,
# date limits for subsetting of GETM model data
getm_start_date = "2018-06-20",
getm_end_date = "2018-08-25",
# maximum depth used for integrations of GETM model data
getm_i_dep = 19
)parameters %>%
write_rds(here::here("data",
"parameters.rds"))
sessionInfo()R version 4.0.3 (2020-10-10)
Platform: x86_64-w64-mingw32/x64 (64-bit)
Running under: Windows 10 x64 (build 18363)
Matrix products: default
locale:
[1] LC_COLLATE=English_Germany.1252 LC_CTYPE=English_Germany.1252
[3] LC_MONETARY=English_Germany.1252 LC_NUMERIC=C
[5] LC_TIME=English_Germany.1252
attached base packages:
[1] stats graphics grDevices utils datasets methods base
other attached packages:
[1] lubridate_1.7.9.2 forcats_0.5.0 stringr_1.4.0 dplyr_1.0.2
[5] purrr_0.3.4 readr_1.4.0 tidyr_1.1.2 tibble_3.0.4
[9] ggplot2_3.3.3 tidyverse_1.3.0 workflowr_1.6.2
loaded via a namespace (and not attached):
[1] tidyselect_1.1.0 xfun_0.19 haven_2.3.1 colorspace_2.0-0
[5] vctrs_0.3.6 generics_0.1.0 htmltools_0.5.0 yaml_2.2.1
[9] rlang_0.4.10 later_1.1.0.1 pillar_1.4.7 withr_2.3.0
[13] glue_1.4.2 DBI_1.1.0 dbplyr_2.0.0 modelr_0.1.8
[17] readxl_1.3.1 lifecycle_0.2.0 munsell_0.5.0 gtable_0.3.0
[21] cellranger_1.1.0 rvest_0.3.6 evaluate_0.14 knitr_1.30
[25] ps_1.5.0 httpuv_1.5.4 fansi_0.4.1 broom_0.7.3
[29] Rcpp_1.0.5 promises_1.1.1 backports_1.2.1 scales_1.1.1
[33] jsonlite_1.7.2 fs_1.5.0 hms_0.5.3 digest_0.6.27
[37] stringi_1.5.3 rprojroot_2.0.2 grid_4.0.3 here_1.0.1
[41] cli_2.2.0 tools_4.0.3 magrittr_2.0.1 crayon_1.3.4
[45] whisker_0.4 pkgconfig_2.0.3 ellipsis_0.3.1 xml2_1.3.2
[49] reprex_0.3.0 assertthat_0.2.1 rmarkdown_2.6 httr_1.4.2
[53] rstudioapi_0.13 R6_2.5.0 git2r_0.27.1 compiler_4.0.3