Analysis of Cant estimates
Jens Daniel Müller
18 September, 2020
Last updated: 2020-09-18
Checks: 7 0
Knit directory: Cant_eMLR/
This reproducible R Markdown analysis was created with workflowr (version 1.6.2). The Checks tab describes the reproducibility checks that were applied when the results were created. The Past versions tab lists the development history.
Great! Since the R Markdown file has been committed to the Git repository, you know the exact version of the code that produced these results.
Great job! The global environment was empty. Objects defined in the global environment can affect the analysis in your R Markdown file in unknown ways. For reproduciblity it’s best to always run the code in an empty environment.
The command set.seed(20200707) was run prior to running the code in the R Markdown file. Setting a seed ensures that any results that rely on randomness, e.g. subsampling or permutations, are reproducible.
Great job! Recording the operating system, R version, and package versions is critical for reproducibility.
Nice! There were no cached chunks for this analysis, so you can be confident that you successfully produced the results during this run.
Great job! Using relative paths to the files within your workflowr project makes it easier to run your code on other machines.
Great! You are using Git for version control. Tracking code development and connecting the code version to the results is critical for reproducibility.
The results in this page were generated with repository version bf31773. See the Past versions tab to see a history of the changes made to the R Markdown and HTML files.
Note that you need to be careful to ensure that all relevant files for the analysis have been committed to Git prior to generating the results (you can use wflow_publish or wflow_git_commit). workflowr only checks the R Markdown file, but you know if there are other scripts or data files that it depends on. Below is the status of the Git repository when the results were generated:
Ignored files:
Ignored: .Rproj.user/
Ignored: data/GLODAPv1_1/
Ignored: data/GLODAPv2_2016b_MappedClimatologies/
Ignored: data/GLODAPv2_2020/
Ignored: data/Gruber_2019/
Ignored: data/WOCE/
Ignored: data/World_Ocean_Atlas_2013_Clement/
Ignored: data/World_Ocean_Atlas_2018/
Ignored: data/eMLR/
Ignored: data/mapping/
Ignored: data/pCO2_atmosphere/
Ignored: dump/
Note that any generated files, e.g. HTML, png, CSS, etc., are not included in this status report because it is ok for generated content to have uncommitted changes.
These are the previous versions of the repository in which changes were made to the R Markdown (analysis/analysis_this_study.Rmd) and HTML (docs/analysis_this_study.html) files. If you’ve configured a remote Git repository (see ?wflow_git_remote), click on the hyperlinks in the table below to view the files as they were in that past version.
| File | Version | Author | Date | Message |
|---|---|---|---|---|
| Rmd | bf31773 | jens-daniel-mueller | 2020-09-18 | rearranged plots |
| html | e120224 | jens-daniel-mueller | 2020-09-18 | Build site. |
| Rmd | 39fe9d0 | jens-daniel-mueller | 2020-09-18 | rearranged plots |
| html | 96e3f0a | jens-daniel-mueller | 2020-09-18 | Build site. |
| Rmd | 6ebc455 | jens-daniel-mueller | 2020-09-18 | rearranged and revised plots |
| html | 8ddeeac | jens-daniel-mueller | 2020-09-18 | Build site. |
| Rmd | 3fe7f52 | jens-daniel-mueller | 2020-09-18 | rearranged plots |
| html | 88e474a | jens-daniel-mueller | 2020-09-18 | Build site. |
| Rmd | cf9b9d7 | jens-daniel-mueller | 2020-09-18 | zonal mean section gruber color scale |
| html | 21668f6 | jens-daniel-mueller | 2020-09-18 | Build site. |
| Rmd | 3838220 | jens-daniel-mueller | 2020-09-18 | zonal mean section gruber color scale |
| html | 9b35dd0 | jens-daniel-mueller | 2020-09-18 | Build site. |
| Rmd | 4b8cb4e | jens-daniel-mueller | 2020-09-18 | zonal mean section gruber color scale |
| html | b68196d | jens-daniel-mueller | 2020-09-18 | Build site. |
| Rmd | 7c0354d | jens-daniel-mueller | 2020-09-18 | mean sections with gruber color scale |
| html | 59e9bcd | jens-daniel-mueller | 2020-09-18 | Build site. |
| Rmd | df65c0a | jens-daniel-mueller | 2020-09-18 | applied Gruber 2019 color scale |
| html | f5a20ac | jens-daniel-mueller | 2020-09-17 | Build site. |
| Rmd | 10c1a10 | jens-daniel-mueller | 2020-09-17 | added Cant along slab |
| html | cf64460 | jens-daniel-mueller | 2020-09-17 | Build site. |
| html | 9d9a553 | jens-daniel-mueller | 2020-09-17 | Build site. |
| Rmd | a7e8ba5 | jens-daniel-mueller | 2020-09-17 | rebuild after complete collapse averaging |
| html | abc176a | jens-daniel-mueller | 2020-09-17 | Build site. |
| Rmd | ca05234 | jens-daniel-mueller | 2020-09-17 | collapse averaging for all big data sets |
| html | 1ea7231 | jens-daniel-mueller | 2020-09-17 | Build site. |
| html | d43d9e2 | jens-daniel-mueller | 2020-09-16 | Build site. |
| html | 605e13b | jens-daniel-mueller | 2020-09-16 | Build site. |
| html | 1f3319a | jens-daniel-mueller | 2020-09-16 | Build site. |
| html | 19d4d56 | jens-daniel-mueller | 2020-09-16 | Build site. |
| html | 55f86a6 | jens-daniel-mueller | 2020-09-15 | Build site. |
| Rmd | b9d37ab | jens-daniel-mueller | 2020-09-15 | observations per density slab included |
| html | 2cd847c | jens-daniel-mueller | 2020-09-14 | Build site. |
| Rmd | 1a13af4 | jens-daniel-mueller | 2020-09-14 | replace all model sections plots chunk |
| html | da91d98 | jens-daniel-mueller | 2020-09-10 | Build site. |
| html | 454e665 | jens-daniel-mueller | 2020-09-10 | Build site. |
| Rmd | c7ae6ab | jens-daniel-mueller | 2020-09-10 | updated plots |
| html | 1124ca5 | jens-daniel-mueller | 2020-09-10 | Build site. |
| Rmd | 27c5ab1 | jens-daniel-mueller | 2020-09-10 | updated plots |
| html | 382ffba | jens-daniel-mueller | 2020-09-10 | Build site. |
| Rmd | d37bb48 | jens-daniel-mueller | 2020-09-10 | updated plots |
| html | a34a239 | jens-daniel-mueller | 2020-09-10 | Build site. |
| html | 2458576 | jens-daniel-mueller | 2020-09-09 | Build site. |
| html | e60e13c | jens-daniel-mueller | 2020-09-09 | Build site. |
| Rmd | 7040b80 | jens-daniel-mueller | 2020-09-09 | remove basin_AIP not covered by mapping |
| html | c3ffdfd | jens-daniel-mueller | 2020-09-08 | Build site. |
| Rmd | 04ee730 | jens-daniel-mueller | 2020-09-08 | rebuild after revision |
| html | 793f996 | jens-daniel-mueller | 2020-09-07 | Build site. |
| Rmd | 2d1300a | jens-daniel-mueller | 2020-09-07 | added all predictor plots |
| html | 148db18 | jens-daniel-mueller | 2020-09-07 | Build site. |
| Rmd | 0bea059 | jens-daniel-mueller | 2020-09-07 | plotted predictor contribution zonal mean |
| html | a50f053 | jens-daniel-mueller | 2020-09-07 | Build site. |
| html | da445a6 | jens-daniel-mueller | 2020-09-04 | Build site. |
| Rmd | 6a302ca | jens-daniel-mueller | 2020-09-04 | rebuild after new data cleaning and mapping Cant to surface |
| html | fa11a74 | jens-daniel-mueller | 2020-09-02 | Build site. |
| html | 429aab3 | jens-daniel-mueller | 2020-09-01 | Build site. |
| html | f4216dd | jens-daniel-mueller | 2020-09-01 | Build site. |
| html | 13a76d5 | jens-daniel-mueller | 2020-08-28 | Build site. |
| Rmd | 2e6a4ca | jens-daniel-mueller | 2020-08-28 | XXX |
| html | 1f05c5d | jens-daniel-mueller | 2020-08-28 | Build site. |
| Rmd | 5ad6a52 | jens-daniel-mueller | 2020-08-28 | added gamma maps and switched to depth levels 150, 500, 1000, 2000 |
| html | 27404de | jens-daniel-mueller | 2020-08-27 | Build site. |
| html | cfdb312 | jens-daniel-mueller | 2020-08-27 | Build site. |
| Rmd | a4d0f62 | jens-daniel-mueller | 2020-08-27 | plotting with functions |
| html | b6d0e6a | jens-daniel-mueller | 2020-08-27 | Build site. |
| html | fc4f889 | jens-daniel-mueller | 2020-08-26 | Build site. |
| Rmd | a3e427c | jens-daniel-mueller | 2020-08-26 | Cant vs regional SD added |
| html | f37f6b6 | jens-daniel-mueller | 2020-08-26 | Build site. |
| Rmd | ce109c0 | jens-daniel-mueller | 2020-08-26 | Cant vs SD plotted |
| html | e951135 | jens-daniel-mueller | 2020-08-26 | Build site. |
| Rmd | 7f3a671 | jens-daniel-mueller | 2020-08-26 | Cant vs SD plotted |
| html | f40e48b | jens-daniel-mueller | 2020-08-26 | Build site. |
| Rmd | b577ec6 | jens-daniel-mueller | 2020-08-26 | Analysis split in this and previous studies |
library(tidyverse)
library(patchwork)
library(scico)
library(scales)
library(metR)1 Data sources
Cant estimates from this study:
- Mean and SD per grid cell (lat, lon, depth)
- Zonal mean and SD (basin, lat, depth)
- Inventories (lat, lon)
Cant_average <-
read_csv(here::here("data/mapping/_summarized_files",
"Cant_average.csv"))
Cant_average_zonal <-
read_csv(here::here("data/mapping/_summarized_files",
"Cant_average_zonal.csv"))
Cant_predictor_average_zonal <-
read_csv(here::here("data/mapping/_summarized_files",
"Cant_predictor_average_zonal.csv"))
Cant_inv <-
read_csv(here::here("data/mapping/_summarized_files",
"Cant_inv.csv"))C* estimates from this study:
- Mean and SD per grid cell (lat, lon, depth)
- Zonal mean and SD (basin, lat, depth)
Cstar_average <-
read_csv(here::here("data/mapping/_summarized_files",
"Cstar_average.csv"))
Cstar_average_zonal <-
read_csv(here::here("data/mapping/_summarized_files",
"Cstar_average_zonal.csv"))Cleaned GLODAPv2_2020 file as used in this study
GLODAP <-
read_csv(
here::here(
"data/GLODAPv2_2020/_summarized_data_files",
"GLODAP_MLR_fitting_ready.csv"
)
)2 Color scale
For ease of comparison with Gruber et al (2019) we adapt their color scale, including the ranges and breaks applied in various types of visualizations.
rgb2hex <- function(r, g, b)
rgb(r, g, b, maxColorValue = 100)
cols = c(rgb2hex(95, 95, 95),
rgb2hex(0, 0, 95),
rgb2hex(100, 0, 0),
rgb2hex(100, 100, 0))
Gruber_rainbow <- colorRampPalette(cols)
rm(rgb2hex, cols)3 Cant budgets
4 Cant - positive
In a first series of plots we explore the distribution of Cant, taking only positive estimates into account (positive here refers to the mean Cant estimate across 10 eMLR model predictions available for each grid cell). Negative values were set to zero before calculating mean sections and inventories.
4.1 Zonal mean sections
breaks <- c(seq(0,18,1),Inf)
breaks_n <- length(breaks) - 1
Cant_average_zonal <- Cant_average_zonal %>%
mutate(Cant_pos_mean_int = cut(Cant_pos_mean,
breaks,
right = FALSE))
zonal_section <- function(df, i_basin_AIP, i_eras, var) {
name_var <- var
var <- sym(var)
lat_max <- max(df$lat)
lat_min <- min(df$lat)
df_sub <- df %>%
filter(eras == i_eras,
basin_AIP == i_basin_AIP)
surface <- df_sub %>%
ggplot(aes(lat, depth, z = !!var)) +
geom_contour_filled(breaks = breaks) +
scale_fill_manual(values = Gruber_rainbow(breaks_n),
name = "Cant") +
coord_cartesian(expand = 0,
ylim = c(500, 0),
xlim = c(lat_min, lat_max)) +
scale_y_reverse() +
theme(
axis.title.x = element_blank(),
axis.text.x = element_blank(),
axis.ticks.x = element_blank()
) +
labs(y = "Depth (m)",
title = paste("Basin:", i_basin_AIP, "| eras:", i_eras))
deep <- df_sub %>%
ggplot(aes(lat, depth, z = !!var)) +
geom_contour_filled(breaks = breaks) +
scale_fill_manual(values = Gruber_rainbow(breaks_n),
name = "Cant") +
scale_y_reverse() +
coord_cartesian(expand = 0,
ylim = c(3000, 500),
xlim = c(lat_min, lat_max)) +
labs(x = "latitude (°N)", y = "Depth (m)")
surface / deep +
plot_layout(guides = "collect")
}
for (i_basin_AIP in unique(Cant_average_zonal$basin_AIP)) {
for (i_eras in rev(unique(Cant_average_zonal$eras))) {
print(zonal_section(Cant_average_zonal,
i_basin_AIP = i_basin_AIP,
i_eras = i_eras,
"Cant_pos_mean"))
}
}
rm(breaks, breaks_n)4.2 Isoneutral slab distribution
Mean of positive Cant within each horizontal grid cell (lon x lat) per isoneutral slab.
Please note that:
- density slabs covering values >28.1 occur by definition only either in the Atlantic or Indo-Pacific basin
- gaps in the maps represent areas where (thin) density layers fit between discrete depth levels used for mapping
Cant_gamma_maps <- Cant_average %>%
group_by(lat, lon, gamma_slab, eras) %>%
summarise(Cant_pos = mean(Cant_pos, na.rm = TRUE)) %>%
ungroup()
breaks <- c(seq(0,16,2),Inf)
breaks_n <- length(breaks) - 1
Cant_gamma_maps <- Cant_gamma_maps %>%
mutate(Cant_pos_int = cut(Cant_pos,
breaks,
right = FALSE))
ggplot() +
geom_raster(data = landmask,
aes(lon, lat),
fill = "grey30") +
geom_raster(data = Cant_gamma_maps,
aes(lon, lat, fill = Cant_pos_int)) +
scale_fill_manual(values = Gruber_rainbow(breaks_n)) +
facet_grid(gamma_slab ~ eras) +
coord_quickmap(expand = 0) +
theme(axis.title = element_blank(),
axis.ticks = element_blank(),
axis.text = element_blank(),
legend.position = "top")
rm(Cant_gamma_maps, breaks, breaks_n)4.3 Inventory map
Column inventory of positive Cant between the surface and 3000m water depth per horizontal grid cell (lat x lon).
breaks <- c(seq(0,16,2),Inf)
breaks_n <- length(breaks) - 1
Cant_inv <- Cant_inv %>%
mutate(cant_inv_pos_int = cut(cant_inv_pos,
breaks,
right = FALSE))
Cant_inv %>%
ggplot() +
geom_raster(data = landmask,
aes(lon, lat), fill = "grey30") +
geom_raster(aes(lon, lat, fill = cant_inv_pos_int)) +
coord_quickmap(expand = 0) +
scale_fill_manual(values = Gruber_rainbow(breaks_n)) +
facet_wrap( ~ eras, ncol = 1) +
theme(axis.title = element_blank())
rm(breaks, breaks_n)5 Global section
5.1 JGOFS_GO
section_global(Cant_average %>% filter(eras == "JGOFS_GO"),
"Cant_pos")
5.2 GO_new
section_global(Cant_average %>% filter(eras == "GO_new"),
"Cant_pos")
6 Cant - all
In a second series of plots we explore the distribution of Cant, taking positive and negative estimates into account.
6.1 Zonal mean sections
section_zonal_average_divergent(Cant_average_zonal,
"Cant_mean",
"gamma_mean")
6.2 Isoneutral slab distribution
Mean of Cant within each horizontal grid cell (lon x lat) per isoneutral slab.
Please note that:
- density slabs covering values >28.1 occur by definition only either in the Atlantic or Indo-Pacific basin
- gaps in the maps represent areas where (thin) density layers fit between discrete depth levels used for mapping
Cant_gamma_maps <- Cant_average %>%
group_by(lat, lon, gamma_slab, eras) %>%
summarise(Cant = mean(Cant, na.rm = TRUE)) %>%
ungroup()
breaks <- c(-Inf, seq(-16, 16, 4), Inf)
breaks_n <- length(breaks) - 1
Cant_gamma_maps <- Cant_gamma_maps %>%
mutate(Cant_int = cut(Cant,
breaks,
right = FALSE))
ggplot() +
geom_raster(data = landmask,
aes(lon, lat),
fill = "grey30") +
geom_raster(data = Cant_gamma_maps,
aes(lon, lat, fill = Cant_int)) +
scale_fill_brewer(palette = "RdBu",
direction = -1) +
facet_grid(gamma_slab ~ eras) +
coord_quickmap(expand = 0) +
theme(
axis.title = element_blank(),
axis.ticks = element_blank(),
axis.text = element_blank(),
legend.position = "top"
)
rm(Cant_gamma_maps, breaks, breaks_n)6.3 Inventory map
Column inventory of positive Cant between the surface and 3000m water depth per horizontal grid cell (lat x lon).
breaks <- c(-Inf, seq(-16,16,4),Inf)
breaks_n <- length(breaks) - 1
Cant_inv <- Cant_inv %>%
mutate(cant_inv_int = cut(cant_inv,
breaks,
right = FALSE))
Cant_inv %>%
ggplot() +
geom_raster(data = landmask,
aes(lon, lat), fill = "grey80") +
geom_raster(aes(lon, lat, fill = cant_inv_int)) +
coord_quickmap(expand = 0) +
scale_fill_brewer(palette = "RdBu",
direction = -1) +
facet_wrap(~eras, ncol = 1) +
theme(
axis.title = element_blank()
)
rm(breaks, breaks_n)7 Cant - standard deviation
7.1 Across models
Standard deviation across Cant from all MLR models was calculate for each grid cell (XYZ). The zonal mean of this standard deviation should reflect the uncertainty associated to the predictor selection within each slab and era.
section_zonal_average_continous(Cant_average_zonal,
"Cant_sd_mean",
"gamma_mean")
7.2 Across basins
Standard deviation of mean Cant values was calculate across all longitudes. This standard deviation should reflect the zonal variability of Cant within the basin and era.
section_zonal_average_continous(Cant_average_zonal,
"Cant_sd",
"gamma_mean")
7.3 Correlation
7.3.1 Cant vs model SD
Cant_average %>%
ggplot(aes(Cant, Cant_sd)) +
geom_vline(xintercept = 0) +
geom_hline(yintercept = 10) +
geom_bin2d() +
scale_fill_viridis_c(option = "magma",
direction = -1,
trans = "log10",
name = "log10(n)") +
facet_grid(basin_AIP ~ eras)
Cant_average %>%
ggplot(aes(Cant, Cant_sd)) +
geom_vline(xintercept = 0) +
geom_hline(yintercept = 10) +
geom_bin2d() +
scale_fill_viridis_c(option = "magma",
direction = -1,
trans = "log10",
name = "log10(n)") +
facet_grid(gamma_slab ~ basin_AIP)
7.3.2 Cant vs regional SD
Cant_average_zonal %>%
ggplot(aes(Cant_mean, Cant_sd)) +
geom_vline(xintercept = 0) +
geom_hline(yintercept = 10) +
geom_bin2d() +
scale_fill_viridis_c(option = "magma",
direction = -1,
trans = "log10",
name = "log10(n)") +
facet_grid(basin_AIP ~ eras)
Cant_average_zonal %>%
ggplot(aes(Cant_mean, Cant_sd)) +
geom_vline(xintercept = 0) +
geom_hline(yintercept = 10) +
geom_bin2d() +
scale_fill_viridis_c(option = "magma",
direction = -1,
trans = "log10",
name = "log10(n)") +
facet_grid(gamma_slab ~ basin_AIP)
8 Cant - predictor contribution
for (variable in c(
"Cant_intercept",
"Cant_aou",
"Cant_oxygen",
"Cant_phosphate",
"Cant_phosphate_star",
"Cant_silicate",
"Cant_tem",
"Cant_sal")) {
print(
section_zonal_average_continous(Cant_predictor_average_zonal,
variable,
"gamma")
)
}
rm(variable)9 Neutral density
9.1 Slab depth
Please note that:
- density slabs covering values >28.1 occur by definition only either in the Atlantic or Indo-Pacific basin
- predictor density slabs are only shown for the upper 3000m as used for the mapping, whereas GLODAP observations are displayed for the entire water column as used for fitting eMLRs (in both cases shallow waters are excluded at low density)
gamma_maps <- Cant_average %>%
group_by(lat, lon, gamma_slab) %>%
summarise(depth_max = max(depth, na.rm = TRUE)) %>%
ungroup()
GLODAP_obs_coverage <- GLODAP %>%
count(lat, lon, gamma_slab, era)
ggplot() +
geom_raster(data = landmask,
aes(lon, lat),
fill = "grey80") +
geom_raster(data = gamma_maps,
aes(lon, lat, fill = depth_max)) +
geom_raster(data = GLODAP_obs_coverage,
aes(lon, lat), fill = "red") +
facet_grid(gamma_slab ~ era) +
coord_quickmap(expand = 0) +
scale_fill_viridis_c(direction = -1) +
theme(axis.title = element_blank(),
axis.ticks = element_blank(),
axis.text = element_blank(),
legend.position = "top")
rm(gamma_maps, GLODAP_obs_coverage)9.2 Surface maps
map_climatology(Cant_average, "gamma")
9.3 Zonal sections
The mean zonal distribution of neutral densities was calculated. CAVEAT: Due to practical reasons, binning here does not include the two highest isoneutral density slabs in the Atlantic, yet.
9.3.1 Mean
Cant_average_zonal %>%
filter(eras == "JGOFS_GO") %>%
ggplot(aes(lat, depth, z = gamma_mean)) +
geom_contour_filled(breaks = slab_breaks) +
geom_contour(breaks = slab_breaks,
col = "white") +
geom_text_contour(breaks = slab_breaks,
col = "white",
skip = 1) +
scale_fill_viridis_d(name = "Gamma",
direction = -1) +
scale_y_reverse() +
scale_x_continuous(breaks = seq(-100, 100, 20)) +
coord_cartesian(expand = 0) +
guides(fill = guide_colorsteps(barheight = unit(10, "cm"))) +
facet_grid(basin_AIP~.)
9.3.2 SD
Higher SD of gamma in shallow, subtropical waters results from a more pronounced longitudinal variability.
Cant_average_zonal %>%
filter(eras == "JGOFS_GO") %>%
ggplot(aes(lat, depth, z = gamma_sd)) +
geom_contour_filled() +
scale_fill_viridis_d(name = "Gamma SD",
direction = -1) +
scale_y_reverse() +
scale_x_continuous(breaks = seq(-100, 100, 20)) +
coord_cartesian(expand = 0) +
guides(fill = guide_colorsteps(barheight = unit(10, "cm"))) +
facet_grid(basin_AIP~.)
10 Cstar
10.1 Zonal mean sections
Cstar_average_zonal <- Cstar_average_zonal %>%
mutate(era = factor(era, c("JGOFS_WOCE", "GO_SHIP", "new_era")))
Cstar_average_zonal %>%
ggplot(aes(lat, depth, z = Cstar_mean_mean)) +
geom_contour_filled(bins = 11) +
scale_fill_viridis_d(name = "Cstar") +
geom_contour(aes(lat, depth, z = gamma_mean_mean),
breaks = slab_breaks,
col = "white") +
geom_text_contour(
aes(lat, depth, z = gamma_mean_mean),
breaks = slab_breaks,
col = "white",
skip = 1
) +
scale_y_reverse() +
coord_cartesian(expand = 0) +
guides(fill = guide_colorsteps(barheight = unit(10, "cm"))) +
facet_grid(basin_AIP ~ era)
11 Sections by model
Zonal sections plots are produced for every 20° longitude, each era and for all models individually and can be downloaded here.
sessionInfo()R version 4.0.2 (2020-06-22)
Platform: x86_64-w64-mingw32/x64 (64-bit)
Running under: Windows 10 x64 (build 18363)
Matrix products: default
locale:
[1] LC_COLLATE=English_Germany.1252 LC_CTYPE=English_Germany.1252
[3] LC_MONETARY=English_Germany.1252 LC_NUMERIC=C
[5] LC_TIME=English_Germany.1252
attached base packages:
[1] stats graphics grDevices utils datasets methods base
other attached packages:
[1] metR_0.7.0 scales_1.1.1 scico_1.2.0 patchwork_1.0.1
[5] forcats_0.5.0 stringr_1.4.0 dplyr_1.0.0 purrr_0.3.4
[9] readr_1.3.1 tidyr_1.1.0 tibble_3.0.3 ggplot2_3.3.2
[13] tidyverse_1.3.0 workflowr_1.6.2
loaded via a namespace (and not attached):
[1] Rcpp_1.0.5 lattice_0.20-41 lubridate_1.7.9 here_0.1
[5] assertthat_0.2.1 rprojroot_1.3-2 digest_0.6.25 plyr_1.8.6
[9] R6_2.4.1 cellranger_1.1.0 backports_1.1.8 reprex_0.3.0
[13] evaluate_0.14 httr_1.4.2 pillar_1.4.6 rlang_0.4.7
[17] readxl_1.3.1 rstudioapi_0.11 data.table_1.13.0 whisker_0.4
[21] blob_1.2.1 checkmate_2.0.0 rmarkdown_2.3 labeling_0.3
[25] munsell_0.5.0 broom_0.7.0 compiler_4.0.2 httpuv_1.5.4
[29] modelr_0.1.8 xfun_0.16 pkgconfig_2.0.3 htmltools_0.5.0
[33] tidyselect_1.1.0 viridisLite_0.3.0 fansi_0.4.1 crayon_1.3.4
[37] dbplyr_1.4.4 withr_2.2.0 later_1.1.0.1 grid_4.0.2
[41] jsonlite_1.7.0 gtable_0.3.0 lifecycle_0.2.0 DBI_1.1.0
[45] git2r_0.27.1 magrittr_1.5 cli_2.0.2 stringi_1.4.6
[49] farver_2.0.3 fs_1.4.2 promises_1.1.1 sp_1.4-2
[53] xml2_1.3.2 ellipsis_0.3.1 generics_0.0.2 vctrs_0.3.2
[57] RColorBrewer_1.1-2 tools_4.0.2 glue_1.4.1 hms_0.5.3
[61] yaml_2.2.1 colorspace_1.4-1 isoband_0.2.2 rvest_0.3.6
[65] memoise_1.1.0 knitr_1.29 haven_2.3.1