Last updated: 2020-09-19

Checks: 7 0

Knit directory: Cant_eMLR/

This reproducible R Markdown analysis was created with workflowr (version 1.6.2). The Checks tab describes the reproducibility checks that were applied when the results were created. The Past versions tab lists the development history.

R Markdown file: up-to-date

Great! Since the R Markdown file has been committed to the Git repository, you know the exact version of the code that produced these results.

Environment: empty

Great job! The global environment was empty. Objects defined in the global environment can affect the analysis in your R Markdown file in unknown ways. For reproduciblity it’s best to always run the code in an empty environment.

Seed: set.seed(20200707)

The command set.seed(20200707) was run prior to running the code in the R Markdown file. Setting a seed ensures that any results that rely on randomness, e.g. subsampling or permutations, are reproducible.

Session information: recorded

Great job! Recording the operating system, R version, and package versions is critical for reproducibility.

Cache: none

Nice! There were no cached chunks for this analysis, so you can be confident that you successfully produced the results during this run.

File paths: relative

Great job! Using relative paths to the files within your workflowr project makes it easier to run your code on other machines.

Repository version: abe1788

Great! You are using Git for version control. Tracking code development and connecting the code version to the results is critical for reproducibility.

The results in this page were generated with repository version abe1788. See the Past versions tab to see a history of the changes made to the R Markdown and HTML files.

Note that you need to be careful to ensure that all relevant files for the analysis have been committed to Git prior to generating the results (you can use wflow_publish or wflow_git_commit). workflowr only checks the R Markdown file, but you know if there are other scripts or data files that it depends on. Below is the status of the Git repository when the results were generated:


Ignored files:
    Ignored:    .Rproj.user/
    Ignored:    data/GLODAPv1_1/
    Ignored:    data/GLODAPv2_2016b_MappedClimatologies/
    Ignored:    data/GLODAPv2_2020/
    Ignored:    data/Gruber_2019/
    Ignored:    data/WOCE/
    Ignored:    data/World_Ocean_Atlas_2013_Clement/
    Ignored:    data/World_Ocean_Atlas_2018/
    Ignored:    data/eMLR/
    Ignored:    data/mapping/
    Ignored:    data/pCO2_atmosphere/
    Ignored:    dump/

Note that any generated files, e.g. HTML, png, CSS, etc., are not included in this status report because it is ok for generated content to have uncommitted changes.

These are the previous versions of the repository in which changes were made to the R Markdown (analysis/mapping_predictor_preparation.Rmd) and HTML (docs/mapping_predictor_preparation.html) files. If you’ve configured a remote Git repository (see ?wflow_git_remote), click on the hyperlinks in the table below to view the files as they were in that past version.

File	Version	Author	Date	Message
html	d59f716	jens-daniel-mueller	2020-09-18	Build site.
html	f5a20ac	jens-daniel-mueller	2020-09-17	Build site.
html	cf64460	jens-daniel-mueller	2020-09-17	Build site.
html	d43d9e2	jens-daniel-mueller	2020-09-16	Build site.
Rmd	9529ad2	jens-daniel-mueller	2020-09-16	PO4 and silicate included for pCO2 and revelle factor calculation
html	1f3319a	jens-daniel-mueller	2020-09-16	Build site.
html	2e57b3f	jens-daniel-mueller	2020-09-16	Build site.
Rmd	e45d875	jens-daniel-mueller	2020-09-16	jonied surface predictor fields
html	da91d98	jens-daniel-mueller	2020-09-10	Build site.
html	4c73801	jens-daniel-mueller	2020-09-10	Build site.
Rmd	da66d06	jens-daniel-mueller	2020-09-10	global section plots modified
html	f6f30c0	jens-daniel-mueller	2020-09-10	Build site.
Rmd	f74449b	jens-daniel-mueller	2020-09-10	global section plots added
html	a34a239	jens-daniel-mueller	2020-09-10	Build site.
Rmd	143fbd7	jens-daniel-mueller	2020-09-10	global section plot added
html	e60e13c	jens-daniel-mueller	2020-09-09	Build site.
Rmd	7040b80	jens-daniel-mueller	2020-09-09	remove basin_AIP not covered by mapping
html	c3ffdfd	jens-daniel-mueller	2020-09-08	Build site.
Rmd	04ee730	jens-daniel-mueller	2020-09-08	rebuild after revision
html	a50f053	jens-daniel-mueller	2020-09-07	Build site.
html	da445a6	jens-daniel-mueller	2020-09-04	Build site.
html	fa11a74	jens-daniel-mueller	2020-09-02	Build site.
html	429aab3	jens-daniel-mueller	2020-09-01	Build site.
html	f4216dd	jens-daniel-mueller	2020-09-01	Build site.
Rmd	8f3ce45	jens-daniel-mueller	2020-09-01	rebuild without PO4 star selection, oxygen only
html	13a76d5	jens-daniel-mueller	2020-08-28	Build site.
Rmd	2e6a4ca	jens-daniel-mueller	2020-08-28	XXX
html	27404de	jens-daniel-mueller	2020-08-27	Build site.
html	78feb87	jens-daniel-mueller	2020-08-27	Build site.
Rmd	42e98c8	jens-daniel-mueller	2020-08-27	section plots for all regular longitude added
html	9ba6c6f	jens-daniel-mueller	2020-08-27	Build site.
Rmd	a503cab	jens-daniel-mueller	2020-08-27	section plots for all regular longitude added
html	cbb9282	jens-daniel-mueller	2020-08-27	Build site.
Rmd	bdb5c02	jens-daniel-mueller	2020-08-27	section plots for all regular longitude added
html	533920b	jens-daniel-mueller	2020-08-27	Build site.
Rmd	94fbf0f	jens-daniel-mueller	2020-08-27	section plots for all regular longitude added
html	2ddebe0	jens-daniel-mueller	2020-08-27	Build site.
Rmd	7bf17cd	jens-daniel-mueller	2020-08-27	removed control plots
html	b6d0e6a	jens-daniel-mueller	2020-08-27	Build site.
html	f40e48b	jens-daniel-mueller	2020-08-26	Build site.
html	ec20f40	jens-daniel-mueller	2020-08-24	Build site.
Rmd	a804955	jens-daniel-mueller	2020-08-24	split mapping into 2 rmds, po4star selection in parameters, use po4star nitrate

library(tidyverse)
library(patchwork)
library(metR)
library(marelac)
library(gsw)

basinmask <-
  read_csv(
    here::here(
      "data/World_Ocean_Atlas_2018/_summarized_files",
      "basin_mask_WOA18.csv"
    )
  )

landmask <-
  read_csv(
    here::here(
      "data/World_Ocean_Atlas_2018/_summarized_files",
      "land_mask_WOA18.csv"
    )
  )

section_global_coordinates <-
  read_csv(here::here("data",
                       "section_global_coordinates.csv"))

1 Required data

All required data sets were subsetted spatially in the read-in section Data base. Currently, following data sets are used for mapping:

1.1 GLODAPv2_2016b_MappedClimatologies

Following variables are currently used:

Phosphate (+Phosphate*)
Silicate
Oxygen (+AOU)
TAlk (surface only)
TCO2 (surface only)

variables <-
  c("oxygen", "PO4", "silicate")

for (i_variable in variables) {
  temp <- read_csv(
    here::here(
      "data/GLODAPv2_2016b_MappedClimatologies/_summarized_files",
      paste(i_variable, ".csv", sep = "")
    )
  )
  
  if (exists("GLODAP_predictors")) {
    GLODAP_predictors <- full_join(GLODAP_predictors, temp)
  }
  
  if (!exists("GLODAP_predictors")) {
    GLODAP_predictors <- temp
  }
}

rm(temp, i_variable, variables)

# removed na's attributable to slightly different coverage of predictor fields
GLODAP_predictors <- GLODAP_predictors %>%
  drop_na()

variables <-
  c("PO4", "silicate", "TAlk", "TCO2")

for (i_variable in variables) {
  temp <- read_csv(
    here::here(
      "data/GLODAPv2_2016b_MappedClimatologies/_summarized_files",
      paste(i_variable, ".csv", sep = "")
    )
  )
  
  if (exists("GLODAP_predictors_CO2")) {
    GLODAP_predictors_CO2 <- full_join(GLODAP_predictors_CO2, temp)
  }
  
  if (!exists("GLODAP_predictors_CO2")) {
    GLODAP_predictors_CO2 <- temp
  }
}

rm(temp, i_variable, variables)

# removed na's attributable to slightly different coverage of predictor fields
GLODAP_predictors_CO2 <- GLODAP_predictors_CO2 %>%
  drop_na()

1.2 World Ocean Atlas 2018

Salinity
Temperature
Neutral density
Basin mask

WOA18_predictors <-
  read_csv(
    here::here(
      "data/World_Ocean_Atlas_2018/_summarized_files",
      "WOA18_predictors.csv"
    )
  )

WOA18_predictors_surface <-
  read_csv(
    here::here(
      "data/World_Ocean_Atlas_2018/_summarized_files",
      "WOA18_predictors_surface.csv"
    )
  )

2 Join WOA18 + GLODAP

WOA18 and GLODAP predictor climatologies are merged. Only horizontal grid cells with observations from both predictor fields are kept.

CAVEAT: Coverage of GLODAP climatologies differs slightly for parameters (some are NA in some regions)

predictors <- full_join(
  GLODAP_predictors,
  WOA18_predictors)

predictors <- predictors %>% 
  drop_na()

rm(GLODAP_predictors, WOA18_predictors)

predictors_surface <- full_join(
  GLODAP_predictors_CO2,
  WOA18_predictors_surface)

predictors_surface <- predictors_surface %>% 
  drop_na()

rm(GLODAP_predictors_CO2, WOA18_predictors_surface)

2.1 Control plots

2.1.1 Maps

Three maps are generated to control successful merging of data sets.

map_climatology(predictors, "PO4")

map_climatology(predictors, "tem")

2.1.2 Maps surface

Three maps are generated to control successful merging of data sets.

map_climatology(predictors_surface, "TAlk")

map_climatology(predictors_surface, "TCO2")

map_climatology(predictors_surface, "sal")

map_climatology(predictors_surface, "tem")

2.1.3 Predictor profiles

Likewise, predictor profiles for the North Atlantic (40.5 / 335.5) are plotted to control successful merging of the data sets.

N_Atl <- predictors %>% 
  filter(lat == parameters$lat_Atl_profile,
         lon == parameters$lon_Atl_section)

N_Atl <- N_Atl %>% 
  select(-basin) %>% 
  pivot_longer(oxygen:gamma, names_to = "parameter", values_to = "value")

N_Atl %>% 
  ggplot(aes(value, depth)) +
  geom_path() +
  geom_point() +
  scale_y_reverse() +
  facet_wrap(~parameter,
             scales = "free_x",
             ncol = 2)

rm(N_Atl)

3 Prepare predictor fields

3.1 PO₄* calculation

The predictor PO₄* was be calculated according to Clement and Gruber (2018), ie based on oxygen. Please note that an errornous equations for PO4* calculation is given in the supplement of Gruber et al (2019), based on nitrate.

predictors <- predictors %>% 
  rename(phosphate = PO4) %>% 
  mutate(phosphate_star = phosphate + (oxygen / 170)  - 1.95)

3.1.1 Maps

map_climatology(predictors, "phosphate_star")

3.1.2 Sections

section_global(predictors, "phosphate_star")

3.2 AOU

3.2.1 Calculation

AOU was calculated as the difference between saturation concentration and observed concentration.

CAVEAT: Algorithms used to calculate oxygen saturation concentration are not yet identical in GLODAP data set (fitting) and predictor climatologies (mapping).

predictors <- predictors %>% 
  mutate(oxygen_sat_m3 = gas_satconc(S = sal,
                                  t = tem,
                                  P = 1.013253,
                                  species = "O2"),
         rho = gsw_pot_rho_t_exact(SA = sal, t = tem, p = depth, p_ref = 10.1325),
         oxygen_sat_kg = oxygen_sat_m3 * (1000/rho),
         aou = oxygen_sat_kg - oxygen) %>% 
  select(-c(oxygen_sat_m3, rho, oxygen_sat_kg))

3.2.2 Maps

map_climatology(predictors, "aou")

3.2.3 Sections

section_global(predictors, "aou")

3.3 Isoneutral slabs

The following boundaries for isoneutral slabs were defined:

Atlantic: -, 26, 26.5, 26.75, 27, 27.25, 27.5, 27.75, 27.85, 27.95, 28.05, 28.1, 28.15, 28.2,
Indo-Pacific: -, 26, 26.5, 26.75, 27, 27.25, 27.5, 27.75, 27.85, 27.95, 28.05, 28.1,

Continuous neutral density (gamma) values based on WOA18 are grouped into isoneutral slabs.

predictors_Atl <- predictors %>% 
  filter(basin == "Atlantic") %>% 
  mutate(gamma_slab = cut(gamma, parameters$slabs_Atl))

predictors_Ind_Pac <- predictors %>% 
  filter(basin == "Indo-Pacific") %>% 
  mutate(gamma_slab = cut(gamma, parameters$slabs_Ind_Pac))

predictors <- bind_rows(predictors_Atl, predictors_Ind_Pac)

rm(predictors_Atl, predictors_Ind_Pac)

4 Plot al predictor sections

4.1 Deep waters

Predictor sections along with lines are shown below for each (potential) predictor variable.

predictors %>%
  ggplot(aes(lon, lat)) +
      geom_raster(data = landmask,
                aes(lon, lat), fill = "grey80") +
  geom_bin2d(binwidth = c(1,1)) +
  geom_vline(xintercept = parameters$longitude_sections_regular,
             col = "white") +
  scale_fill_viridis_c(direction = -1) +
  coord_quickmap(expand = 0) +
  theme(legend.position = "bottom")

vars <-
  c(
    "gamma",
    "sal",
    "tem",
    "phosphate",
    "phosphate_star",
    "oxygen",
    "aou",
    "silicate"
  )

for (i_var in vars) {
  print(section_climatology_regular(predictors, i_var))
}

4.2 Surface waters

Predictor sections along with lines are shown below for each (potential) predictor variable.

predictors_surface %>%
  ggplot(aes(lon, lat)) +
  geom_raster(data = landmask,
                aes(lon, lat), fill = "grey80") +
  geom_bin2d(binwidth = c(1,1)) +
  geom_vline(xintercept = parameters$longitude_sections_regular,
             col = "white") +
  scale_fill_viridis_c(direction = -1) +
  coord_quickmap(expand = 0) +
  theme(legend.position = "bottom")

vars <-
  c(
    "gamma",
    "sal",
    "tem",
    "TCO2",
    "TAlk"
  )

for (i_var in vars) {
  print(section_climatology_regular(predictors_surface, i_var))
}

5 Write csv

predictors %>%
    write_csv(here::here("data/mapping/predictor_fields",
                         "W18_st_G16_opsn.csv"))

predictors_surface %>%
    write_csv(here::here("data/mapping/predictor_fields",
                         "W18_st_G16_opsn_surface.csv"))

6 Alternative predictors

6.1 WOA13 + GLODAP

Currently not used.

WOA13 <-
  read_csv(
    here::here(
      "data/World_Ocean_Atlas_2013_Clement/_summarized_files",
      "WOA13_mask_gamma.csv"
    )
  )

WOA13_gamma <- WOA13 %>%
  select(-mask)

rm(WOA13)

predictors <- full_join(GLODAP_predictors, WOA13_gamma)
GLODAP_depths <- unique(GLODAP_predictors$depth)

rm(GLODAP_predictors, WOA13_gamma)

predictors <- predictors %>% 
  group_by(lat, lon) %>% 
  mutate(n_oxygen = sum(!is.na(oxygen)),
         n_PO4 = sum(!is.na(PO4)),
         n_silicate = sum(!is.na(silicate)),
         n_sal = sum(!is.na(sal)),
         n_tem = sum(!is.na(tem)),
         n_gamma = sum(!is.na(gamma))) %>% 
  ungroup()

predictors <- predictors %>% 
  filter(n_oxygen > 0,
         n_PO4 > 0,
         n_silicate > 0, 
         n_sal > 0, 
         n_tem > 0, 
         n_gamma > 0) %>% 
  select(-c(n_oxygen, 
            n_PO4, 
            n_silicate, 
            n_sal, 
            n_tem,
            n_gamma))

predictors <- predictors %>% 
  drop_na()

sessionInfo()

R version 4.0.2 (2020-06-22)
Platform: x86_64-w64-mingw32/x64 (64-bit)
Running under: Windows 10 x64 (build 18363)

Matrix products: default

locale:
[1] LC_COLLATE=English_Germany.1252  LC_CTYPE=English_Germany.1252   
[3] LC_MONETARY=English_Germany.1252 LC_NUMERIC=C                    
[5] LC_TIME=English_Germany.1252    

attached base packages:
[1] stats     graphics  grDevices utils     datasets  methods   base     

other attached packages:
 [1] gsw_1.0-5       testthat_2.3.2  marelac_2.1.10  shape_1.4.4    
 [5] metR_0.7.0      patchwork_1.0.1 forcats_0.5.0   stringr_1.4.0  
 [9] dplyr_1.0.0     purrr_0.3.4     readr_1.3.1     tidyr_1.1.0    
[13] tibble_3.0.3    ggplot2_3.3.2   tidyverse_1.3.0 workflowr_1.6.2

loaded via a namespace (and not attached):
 [1] Rcpp_1.0.5        here_0.1          lubridate_1.7.9   assertthat_0.2.1 
 [5] rprojroot_1.3-2   digest_0.6.25     R6_2.4.1          cellranger_1.1.0 
 [9] backports_1.1.8   reprex_0.3.0      evaluate_0.14     httr_1.4.2       
[13] pillar_1.4.6      rlang_0.4.7       readxl_1.3.1      rstudioapi_0.11  
[17] data.table_1.13.0 whisker_0.4       blob_1.2.1        checkmate_2.0.0  
[21] rmarkdown_2.3     labeling_0.3      munsell_0.5.0     broom_0.7.0      
[25] compiler_4.0.2    httpuv_1.5.4      modelr_0.1.8      xfun_0.16        
[29] pkgconfig_2.0.3   htmltools_0.5.0   tidyselect_1.1.0  viridisLite_0.3.0
[33] fansi_0.4.1       crayon_1.3.4      dbplyr_1.4.4      withr_2.2.0      
[37] later_1.1.0.1     grid_4.0.2        jsonlite_1.7.0    gtable_0.3.0     
[41] lifecycle_0.2.0   DBI_1.1.0         seacarb_3.2.13    git2r_0.27.1     
[45] magrittr_1.5      scales_1.1.1      oce_1.2-0         cli_2.0.2        
[49] stringi_1.4.6     farver_2.0.3      fs_1.4.2          promises_1.1.1   
[53] xml2_1.3.2        ellipsis_0.3.1    generics_0.0.2    vctrs_0.3.2      
[57] tools_4.0.2       glue_1.4.1        hms_0.5.3         yaml_2.2.1       
[61] colorspace_1.4-1  isoband_0.2.2     rvest_0.3.6       knitr_1.29       
[65] haven_2.3.1

Mapping

Jens Daniel Müller

19 September, 2020

1 Required data

1.1 GLODAPv2_2016b_MappedClimatologies

1.2 World Ocean Atlas 2018

2 Join WOA18 + GLODAP

2.1 Control plots

2.1.1 Maps

2.1.2 Maps surface

2.1.3 Predictor profiles

3 Prepare predictor fields

3.1 PO₄* calculation

3.1.1 Maps

3.1.2 Sections

3.2 AOU

3.2.1 Calculation

3.2.2 Maps

3.2.3 Sections

3.3 Isoneutral slabs

4 Plot al predictor sections

4.1 Deep waters

4.2 Surface waters

5 Write csv

6 Alternative predictors

6.1 WOA13 + GLODAP

Mapping

Jens Daniel Müller

19 September, 2020

1 Required data

1.1 GLODAPv2_2016b_MappedClimatologies

1.2 World Ocean Atlas 2018

2 Join WOA18 + GLODAP

2.1 Control plots

2.1.1 Maps

2.1.2 Maps surface

2.1.3 Predictor profiles

3 Prepare predictor fields

3.1 PO4* calculation

3.1.1 Maps

3.1.2 Sections

3.2 AOU

3.2.1 Calculation

3.2.2 Maps

3.2.3 Sections

3.3 Isoneutral slabs

4 Plot al predictor sections

4.1 Deep waters

4.2 Surface waters

5 Write csv

6 Alternative predictors

6.1 WOA13 + GLODAP

3.1 PO₄* calculation