Temporal data coverage
Pasqualina Vonlanthen & Jens Daniel Müller
21 October, 2021
Last updated: 2021-10-21
Checks: 7 0
Knit directory: bgc_argo_r_argodata/
This reproducible R Markdown analysis was created with workflowr (version 1.6.2). The Checks tab describes the reproducibility checks that were applied when the results were created. The Past versions tab lists the development history.
Great! Since the R Markdown file has been committed to the Git repository, you know the exact version of the code that produced these results.
Great job! The global environment was empty. Objects defined in the global environment can affect the analysis in your R Markdown file in unknown ways. For reproduciblity it’s best to always run the code in an empty environment.
The command set.seed(20211008) was run prior to running the code in the R Markdown file. Setting a seed ensures that any results that rely on randomness, e.g. subsampling or permutations, are reproducible.
Great job! Recording the operating system, R version, and package versions is critical for reproducibility.
Nice! There were no cached chunks for this analysis, so you can be confident that you successfully produced the results during this run.
Great job! Using relative paths to the files within your workflowr project makes it easier to run your code on other machines.
Great! You are using Git for version control. Tracking code development and connecting the code version to the results is critical for reproducibility.
The results in this page were generated with repository version 58c24b6. See the Past versions tab to see a history of the changes made to the R Markdown and HTML files.
Note that you need to be careful to ensure that all relevant files for the analysis have been committed to Git prior to generating the results (you can use wflow_publish or wflow_git_commit). workflowr only checks the R Markdown file, but you know if there are other scripts or data files that it depends on. Below is the status of the Git repository when the results were generated:
Ignored files:
Ignored: .Rhistory
Ignored: .Rproj.user/
Untracked files:
Untracked: code/creating_dataframe.R
Untracked: code/creating_map.R
Note that any generated files, e.g. HTML, png, CSS, etc., are not included in this status report because it is ok for generated content to have uncommitted changes.
These are the previous versions of the repository in which changes were made to the R Markdown (analysis/coverage_timeseries.Rmd) and HTML (docs/coverage_timeseries.html) files. If you’ve configured a remote Git repository (see ?wflow_git_remote), click on the hyperlinks in the table below to view the files as they were in that past version.
| File | Version | Author | Date | Message |
|---|---|---|---|---|
| Rmd | 58c24b6 | pasqualina-vonlanthendinenna | 2021-10-21 | timeseries attempt 2, added description |
| html | 62d8519 | pasqualina-vonlanthendinenna | 2021-10-20 | Build site. |
| html | b8feac2 | pasqualina-vonlanthendinenna | 2021-10-20 | Build site. |
| Rmd | b7b1806 | pasqualina-vonlanthendinenna | 2021-10-20 | adding revised code |
| html | 701fffa | pasqualina-vonlanthendinenna | 2021-10-20 | Build site. |
| Rmd | b88a839 | pasqualina-vonlanthendinenna | 2021-10-20 | adding revised code |
Task
Count the number of bgc-argo profiles, and plot their evolution over time.
Load data
Read the files created in loading_data.html:
path_argo_preprocessed <- paste0(path_argo, "/preprocessed_bgc_data")
bgc_subset <-
read_rds(file = paste0(path_argo_preprocessed, "/bgc_subset.rds"))
bgc_metadata <-
read_rds(file = paste0(path_argo_preprocessed, "/bgc_metadata.rds"))
bgc_data <-
read_rds(file = paste0(path_argo_preprocessed, "/bgc_data.rds"))
bgc_merge <-
read_rds(file = paste0(path_argo_preprocessed, "/bgc_merge.rds"))QC flags
QC flags for values (‘flag’ column) are between 1 and 8, where:
- 1 is ‘good’ data
- 2 is ‘probably good’ data,
- 3 is ‘probably bad’ data,
- 4 is ‘bad’ data,
- 5 is ‘value changed’,
- 8 is ‘estimated value’,
- 9 is ‘missing value’.
- (6 and 7 are not used)
Profile QC flags (‘profile_flag’ column) are QC codes attributed to the entire profile, and indicate the number of depth levels (in %) where the value is considered to be good data (QC flags of 1, 2, 5, and 8):
- ‘A’ means 100% of profile levels contain good data,
- ‘B’ means 75-<100% of profile levels contain good data,
- ‘C’ means 50-75% of profile levels contain good data,
- ‘D’ means 25-50% of profile levels contain good data,
- ‘E’ means >0-50% of profile levels contain good data,
- ‘F’ means 0% of profile levels contain good data.
Number of profiles
# count the number of profiles per parameter
bgc_profile_counts <- bgc_metadata %>%
select(platform_number, cycle_number, date,
profile_doxy_qc, profile_ph_in_situ_total_qc, profile_nitrate_qc) %>%
pivot_longer(cols = profile_doxy_qc:profile_nitrate_qc,
names_to = "parameter",
values_to = "profile_flag",
names_prefix = "profile_") %>%
mutate(year = year(date),
month = month(date)) %>%
count(year, month, parameter, profile_flag) %>% # count the number of occurrences of unique flags for each parameter, in each month of each year
filter(!is.na(profile_flag),
profile_flag != "")
# the 'parameter' column contains character strings of either 'doxy_qc', 'ph_in_situ_total_qc', or 'nitrate_qc', with the corresponding profile QC flag in the 'profile_flag' columnPlot the evolution of the number of profiles over time
bgc_profile_counts %>%
ggplot(aes(x = month, y = n, col = profile_flag)) +
geom_line() +
geom_point() +
facet_grid(parameter ~ year,
scales = "free_y") +
scale_x_continuous(breaks = seq(1,12,2))+
labs(x = 'month', y = 'number of profiles', title = 'number of profiles per year')+
theme_bw()# draw separate plots for the separate parameters
bgc_profile_counts %>%
group_split(parameter) %>% # creates a separate flag count for each parameter
map(
~ ggplot(data = .x, # repeats the ggplot for each separate parameter
aes(
x = month, y = n, col = profile_flag
)) +
geom_line() +
geom_point() +
facet_grid(. ~ year,
scales = "free_y") +
labs(title = paste("Parameter: ", unique(.x$parameter)),
x = 'month', y = 'number of profiles') +
scale_x_continuous(breaks = seq(1,12,2))+
theme_bw()
)[[1]]
[[2]]
[[3]]
# count the number of profiles with a QC flag of A for at least one BGC parameter
# (not plotted)
bgc_profile_counts_A <- bgc_metadata %>%
select(platform_number, cycle_number, date,
profile_doxy_qc, profile_ph_in_situ_total_qc, profile_nitrate_qc) %>%
pivot_longer(cols = profile_doxy_qc:profile_nitrate_qc,
names_to = "parameter",
values_to = "profile_flag",
names_prefix = "profile_") %>%
mutate(year = year(date),
month = month(date)) %>%
filter(profile_flag == "A") %>%
distinct(platform_number, cycle_number, year, month) %>%
count(year, month)# count the number of profiles which have a QC flag of A for all three BGC parameters
# (plotted below)
bgc_profile_counts_total_A <- bgc_metadata %>%
select(platform_number, cycle_number, date,
profile_doxy_qc, profile_ph_in_situ_total_qc, profile_nitrate_qc) %>%
filter(profile_doxy_qc == 'A' &
profile_ph_in_situ_total_qc == 'A' &
profile_nitrate_qc == 'A') %>%
pivot_longer(cols = profile_doxy_qc:profile_nitrate_qc,
names_to = "parameter",
values_to = "profile_flag",
names_prefix = "profile_") %>%
mutate(year = year(date),
month = month(date)) %>%
distinct(platform_number, cycle_number, year, month) %>%
count(year, month)bgc_profile_counts_total_A %>%
ggplot(aes(x = month, y = n)) +
geom_line() +
geom_point() +
facet_grid(. ~ year,
scales = "free_y") +
scale_x_continuous(breaks = seq(1,12,2)) +
labs(x = 'month', y = 'number of profiles', title = 'number of profiles with all three BGC parameters (QC flag A)')+
theme_bw()
sessionInfo()R version 4.0.3 (2020-10-10)
Platform: x86_64-pc-linux-gnu (64-bit)
Running under: openSUSE Leap 15.2
Matrix products: default
BLAS: /usr/local/R-4.0.3/lib64/R/lib/libRblas.so
LAPACK: /usr/local/R-4.0.3/lib64/R/lib/libRlapack.so
locale:
[1] LC_CTYPE=en_US.UTF-8 LC_NUMERIC=C
[3] LC_TIME=en_US.UTF-8 LC_COLLATE=en_US.UTF-8
[5] LC_MONETARY=en_US.UTF-8 LC_MESSAGES=en_US.UTF-8
[7] LC_PAPER=en_US.UTF-8 LC_NAME=C
[9] LC_ADDRESS=C LC_TELEPHONE=C
[11] LC_MEASUREMENT=en_US.UTF-8 LC_IDENTIFICATION=C
attached base packages:
[1] stats graphics grDevices utils datasets methods base
other attached packages:
[1] lubridate_1.7.9 argodata_0.0.0.9000 forcats_0.5.0
[4] stringr_1.4.0 dplyr_1.0.5 purrr_0.3.4
[7] readr_1.4.0 tidyr_1.1.3 tibble_3.1.3
[10] ggplot2_3.3.5 tidyverse_1.3.0 workflowr_1.6.2
loaded via a namespace (and not attached):
[1] Rcpp_1.0.7 assertthat_0.2.1 rprojroot_2.0.2 digest_0.6.27
[5] utf8_1.2.2 R6_2.5.1 cellranger_1.1.0 backports_1.1.10
[9] reprex_0.3.0 evaluate_0.14 highr_0.8 httr_1.4.2
[13] pillar_1.6.2 rlang_0.4.11 readxl_1.3.1 rstudioapi_0.13
[17] whisker_0.4 jquerylib_0.1.4 blob_1.2.1 rmarkdown_2.10
[21] labeling_0.4.2 munsell_0.5.0 broom_0.7.9 compiler_4.0.3
[25] httpuv_1.6.2 modelr_0.1.8 xfun_0.25 pkgconfig_2.0.3
[29] htmltools_0.5.1.1 tidyselect_1.1.0 fansi_0.5.0 crayon_1.4.1
[33] dbplyr_1.4.4 withr_2.4.2 later_1.3.0 grid_4.0.3
[37] jsonlite_1.7.2 gtable_0.3.0 lifecycle_1.0.0 DBI_1.1.1
[41] git2r_0.27.1 magrittr_2.0.1 scales_1.1.1 cli_3.0.1
[45] stringi_1.5.3 farver_2.1.0 fs_1.5.0 promises_1.2.0.1
[49] xml2_1.3.2 bslib_0.2.5.1 ellipsis_0.3.2 generics_0.1.0
[53] vctrs_0.3.8 tools_4.0.3 glue_1.4.2 RNetCDF_2.4-2
[57] hms_0.5.3 yaml_2.2.1 colorspace_2.0-2 rvest_0.3.6
[61] knitr_1.33 haven_2.3.1 sass_0.4.0