Mapping dcant eMLR

workflowr

• Summary
• Checks
• Past versions

Last updated: 2021-08-09

Checks: 7 0

Knit directory: emlr_obs_v_XXX/

This reproducible R Markdown analysis was created with workflowr (version 1.6.2). The Checks tab describes the reproducibility checks that were applied when the results were created. The Past versions tab lists the development history.

---

R Markdown file: up-to-date

Great! Since the R Markdown file has been committed to the Git repository, you know the exact version of the code that produced these results.

Environment: empty

Great job! The global environment was empty. Objects defined in the global environment can affect the analysis in your R Markdown file in unknown ways. For reproduciblity it’s best to always run the code in an empty environment.

Seed: set.seed(20200707)

The command set.seed(20200707) was run prior to running the code in the R Markdown file. Setting a seed ensures that any results that rely on randomness, e.g. subsampling or permutations, are reproducible.

Session information: recorded

Great job! Recording the operating system, R version, and package versions is critical for reproducibility.

Cache: none

Nice! There were no cached chunks for this analysis, so you can be confident that you successfully produced the results during this run.

File paths: relative

Great job! Using relative paths to the files within your workflowr project makes it easier to run your code on other machines.

Repository version: dd6419c

Great! You are using Git for version control. Tracking code development and connecting the code version to the results is critical for reproducibility.

The results in this page were generated with repository version dd6419c. See the Past versions tab to see a history of the changes made to the R Markdown and HTML files.

Note that you need to be careful to ensure that all relevant files for the analysis have been committed to Git prior to generating the results (you can use wflow_publish or wflow_git_commit). workflowr only checks the R Markdown file, but you know if there are other scripts or data files that it depends on. Below is the status of the Git repository when the results were generated:

Ignored files:
    Ignored:    .Rhistory
    Ignored:    .Rproj.user/

Unstaged changes:
    Modified:   code/Workflowr_project_managment.R
    Modified:   data/auxillary/params_local.rds

Note that any generated files, e.g. HTML, png, CSS, etc., are not included in this status report because it is ok for generated content to have uncommitted changes.

---

These are the previous versions of the repository in which changes were made to the R Markdown (analysis/mapping_dcant_eMLR.Rmd) and HTML (docs/mapping_dcant_eMLR.html) files. If you’ve configured a remote Git repository (see ?wflow_git_remote), click on the hyperlinks in the table below to view the files as they were in that past version.

File	Version	Author	Date	Message
html	cd8e0d5	jens-daniel-mueller	2021-08-06	Build site.
html	15773a0	jens-daniel-mueller	2021-08-06	included calculation of revelle factor
Rmd	d694e17	jens-daniel-mueller	2021-08-06	included calculation of revelle factor
html	da61d1a	jens-daniel-mueller	2021-08-06	Build site.
Rmd	39bfacc	jens-daniel-mueller	2021-08-06	test with one global basin separation
html	1010198	jens-daniel-mueller	2021-08-06	Build site.
Rmd	3a35523	jens-daniel-mueller	2021-08-06	compare surface obs and equi dcant estimates
html	8933b37	jens-daniel-mueller	2021-08-06	Build site.
Rmd	a9e032a	jens-daniel-mueller	2021-08-06	plot decadel changes of surface obs
html	340d731	jens-daniel-mueller	2021-08-06	Build site.
html	71546e4	jens-daniel-mueller	2021-08-06	test with stricter CANYON-B filtering
Rmd	9486592	jens-daniel-mueller	2021-08-06	test with stricter CANYON-B filtering
Rmd	b3c194b	jens-daniel-mueller	2021-08-05	test with cruise and sample bases CANYON-B filtering
html	29444a1	jens-daniel-mueller	2021-08-05	Build site.
html	42e80c0	jens-daniel-mueller	2021-08-04	Build site.
html	48f6eed	jens-daniel-mueller	2021-08-04	Build site.
Rmd	7499718	jens-daniel-mueller	2021-08-04	test with eMLR to surface
html	e92e157	jens-daniel-mueller	2021-08-04	Build site.
Rmd	de8536c	jens-daniel-mueller	2021-08-04	test surface dcant calculation from surface ocean data
html	9736844	jens-daniel-mueller	2021-08-04	Build site.
Rmd	e63af81	jens-daniel-mueller	2021-08-04	test surface dcant calculation from surface ocean data
html	1c597ab	jens-daniel-mueller	2021-08-04	Build site.
html	81a46a4	jens-daniel-mueller	2021-08-03	Build site.
html	b88c61b	jens-daniel-mueller	2021-08-03	Build site.
Rmd	02fbeae	jens-daniel-mueller	2021-08-03	test with strict CANYON-B offset threshold
html	0f0d5e5	jens-daniel-mueller	2021-08-03	Build site.
html	a53656d	jens-daniel-mueller	2021-08-03	Build site.
html	88f7356	jens-daniel-mueller	2021-08-02	Build site.
html	d759279	jens-daniel-mueller	2021-08-02	Build site.
html	127b801	jens-daniel-mueller	2021-07-24	Build site.
html	1f65ef1	jens-daniel-mueller	2021-07-23	Build site.
html	912d90e	jens-daniel-mueller	2021-07-23	Build site.
html	2477316	jens-daniel-mueller	2021-07-23	rebuild: surface dcant mapping seperate
html	c9ccc00	jens-daniel-mueller	2021-07-22	Build site.
Rmd	6a7f226	jens-daniel-mueller	2021-07-22	surface dcant mapping seperate
html	f3c0d7a	jens-daniel-mueller	2021-07-22	Build site.
Rmd	203223f	jens-daniel-mueller	2021-07-22	surface dcant mapping seperate
html	c75b2a0	jens-daniel-mueller	2021-07-22	Build site.
Rmd	7d6951d	jens-daniel-mueller	2021-07-22	surface dcant mapping seperate
html	768ae83	jens-daniel-mueller	2021-07-22	Build site.
Rmd	17db872	jens-daniel-mueller	2021-07-22	surface dcant mapping with surface data only
html	426b2df	jens-daniel-mueller	2021-07-21	Build site.
html	78fe930	jens-daniel-mueller	2021-07-21	Build site.
Rmd	ee0e941	jens-daniel-mueller	2021-07-21	surface dcant mapping with preformed DIC
html	971ce87	jens-daniel-mueller	2021-07-13	Build site.
Rmd	89d9fcb	jens-daniel-mueller	2021-07-13	complete revision
html	bef1b71	jens-daniel-mueller	2021-07-09	Build site.
Rmd	f682536	jens-daniel-mueller	2021-07-09	complete revision

---

1 Version ID

The results displayed on this site correspond to the Version_ID: v_XXX

2 Required data

2.1 Predictor fields

Currently, we use following combined predictor fields:

• WOA18: S, T, and derived variables
• GLODAP16: Oxygen, PO4, NO3, Silicate, and derived variables

predictors <-
  read_csv(paste(path_version_data,
                 "W18_st_G16_opsn.csv",
                 sep = ""))

predictors_surface <-
  read_csv(paste(path_version_data,
                 "W18_st_G16_opsn_surface.csv",
                 sep = ""))

# check if surface data exist
surface_data <- nrow(predictors_surface) > 0

tref  <-
  read_csv(paste(path_version_data,
                 "tref.csv",
                 sep = ""))


variables <-
  c("dissicos", "talkos", "po4os", "spco2", "tos")

for (i_variable in variables) {
  
  temp <- read_csv(paste0(
    path_root,
    "/model/preprocessing/surface_ocean_A/", i_variable, ".csv")
  )
  
  if (exists("surface_mod")) {
    surface_mod <- full_join(surface_mod, temp)
  }
  
  if (!exists("surface_mod")) {
    surface_mod <- temp
  }
}

rm(temp, i_variable, variables)

surface_obs <- read_csv(paste0(
    path_observations,
    "preprocessing/OceanSODA.csv")
  )

2.2 Atm. pCO2

Required only to estimate the change of dcant in surface water and assuming that the ocean pCO2 trend follows the atmospheric forcing.

co2_atm_tref <-
  read_csv(paste(path_version_data,
                 "co2_atm_tref.csv",
                 sep = ""))

2.3 MLR models

lm_best_dcant <-
  read_csv(paste(path_version_data,
                 "lm_best_dcant.csv",
                 sep = ""))

2.4 Model truth

tcant_tref_1 <-
  read_csv(
    paste(
      path_model_preprocessing,
      "cant_annual_field_AD",
      "/cant_",
      unique(tref$median_year[1]),
      ".csv",
      sep = ""
    )
  )

tcant_tref_1 <- tcant_tref_1 %>%
  rename(tcant_tref_1 = cant_total) %>%
  select(-year)

tcant_tref_2 <-
  read_csv(
    paste(
      path_model_preprocessing,
      "cant_annual_field_AD",
      "/cant_",
      unique(tref$median_year[2]),
      ".csv",
      sep = ""
    )
  )

tcant_tref_2 <- tcant_tref_2 %>%
  rename(tcant_tref_2 = cant_total) %>%
  select(-year)

dcant_3d <- left_join(tcant_tref_1, tcant_tref_2) %>%
  mutate(dcant = tcant_tref_2 - tcant_tref_1)

rm(tcant_tref_1, tcant_tref_2)

dcant_3d <- dcant_3d %>%
  mutate(dcant_pos = if_else(dcant <= 0, 0, dcant))

dcant_surface_mod_truth <- dcant_3d %>% 
  filter(depth == 5)

rm(dcant_3d)

3 Join MLRs + climatologies

# remove predictor variable from model
lm_best_dcant <- lm_best_dcant %>% 
  mutate(model = str_remove(model, paste(params_local$MLR_target, "~ ")))

# join predictors and MLR
dcant <- left_join(lm_best_dcant, predictors)

rm(predictors, lm_best_dcant)

4 Map dcant

4.1 Deep water

4.1.1 Apply MLRs to predictor

dcant <- b_dcant(dcant)

4.1.2 Sections by model

Zonal section plots are produced for every 20° longitude, each era and for all models individually. Plots can be accessed here:

• /nfs/kryo/work/jenmueller/emlr_cant/observations/v_XXX/figures/Cant_model_sections/

if (params_local$plot_all_figures == "y") {
  for (i_eras in unique(cant$eras)) {
    # i_eras <- unique(cant$eras)[2]
    cant_eras <- cant %>%
      filter(eras == i_eras)
    
    for (i_lon in params_global$longitude_sections_regular) {
      # i_lon <- params_global$longitude_sections_regular[7]
      cant_eras_lon <- cant_eras %>%
        filter(lon == i_lon)
      
      limits = max(abs(cant_eras_lon$cant)) * c(-1, 1)
      
      cant_eras_lon %>%
        ggplot(aes(lat, depth, z = cant)) +
        stat_summary_2d(
          fun = "mean",
          na.rm = TRUE,
          bins = 20,
          col = "grey"
        ) +
        scale_fill_scico(name = "Cant",
                         palette = "vik",
                         limit = limits) +
        scale_y_reverse(limits = c(params_global$plotting_depth, NA)) +
        scale_x_continuous(limits = c(-85, 85)) +
        labs(title = paste(
          "eras:",
          i_eras,
          "| lon:",
          i_lon,
          "|",
          params_local$Version_ID
        )) +
        facet_wrap(~ model, ncol = 5)
      
      ggsave(
        paste(
          path_version_figures,
          "Cant_model_sections/",
          paste("Cant_model",
                i_eras,
                "lon",
                i_lon,
                "section.png",
                sep = "_"),
          sep = ""
        ),
        width = 17,
        height = 9
      )
      
    }
  }
}

4.2 Surface water

As outlined in Gruber et al. (2019), a transient equilibrium approach was applied to estimate dcant in surface waters, assuming that the CO₂ system in these waters has followed the increase in atmospheric CO₂ closely.

Using eq 10.2.16 from OBD, the change in anthropogenic CO₂ in the upper ocean was computed as:

\(\Delta\)_tC_ant,eq(t2 − t1) = 1∕\(\gamma\) ⋅ DIC/pCO₂ ⋅ (pCO_2,atm (t2)− pCO_2,atm(t1))

, where DIC and pCO₂ are the in situ values, where \(\gamma\) is the buffer (Revelle) factor and where we evaluated the right-hand side using seacarb employing the Luecker constants using the climatological values for temperature, salinity, DIC and Alk.

4.2.1 Layer depth

surface_layer <- predictors_surface %>% 
  group_by(lat, lon, data_source) %>% 
  summarise(depth_max = max(depth),
            n_layer = n()) %>% 
  ungroup()


map +
  geom_raster(data = surface_layer,
              aes(lon, lat, fill=depth_max)) +
  scale_fill_scico(palette = "nuuk", direction = -1) +
  facet_grid(data_source ~ .)

Past versions of surface_layer_depth-1.png

Version	Author	Date
cd8e0d5	jens-daniel-mueller	2021-08-06
15773a0	jens-daniel-mueller	2021-08-06
340d731	jens-daniel-mueller	2021-08-06
71546e4	jens-daniel-mueller	2021-08-06
42e80c0	jens-daniel-mueller	2021-08-04
48f6eed	jens-daniel-mueller	2021-08-04
912d90e	jens-daniel-mueller	2021-07-23
2477316	jens-daniel-mueller	2021-07-23
c9ccc00	jens-daniel-mueller	2021-07-22
c75b2a0	jens-daniel-mueller	2021-07-22

map +
  geom_raster(data = surface_layer,
              aes(lon, lat, fill=n_layer)) +
  scale_fill_scico(palette = "tokyo") +
  facet_grid(data_source ~ .)

Past versions of surface_layer_depth-2.png

Version	Author	Date
cd8e0d5	jens-daniel-mueller	2021-08-06
15773a0	jens-daniel-mueller	2021-08-06
340d731	jens-daniel-mueller	2021-08-06
71546e4	jens-daniel-mueller	2021-08-06
42e80c0	jens-daniel-mueller	2021-08-04
48f6eed	jens-daniel-mueller	2021-08-04
912d90e	jens-daniel-mueller	2021-07-23
2477316	jens-daniel-mueller	2021-07-23
c9ccc00	jens-daniel-mueller	2021-07-22
c75b2a0	jens-daniel-mueller	2021-07-22

4.2.2 Surface pCO2

predictors_surface_all_depth <- predictors_surface

predictors_surface <- predictors_surface %>%
  filter(depth %in% c(0, 5)) %>%
  mutate(
    pCO2 = carb(
      flag = 15,
      var1 = TAlk * 1e-6,
      var2 = TCO2 * 1e-6,
      S = sal,
      T = temp,
      P = depth / 10,
      Pt = phosphate * 1e-6,
      Sit = silicate * 1e-6,
      k1k2 = "l"
    )$pCO2
  )

predictors_surface %>%
  mutate(depth = 0) %>% 
  group_split(data_source) %>%
  # head(1) %>%
  map( ~
         p_map_climatology(
           df = .x,
           var = "pCO2",
           subtitle_text = paste("Data source: ", unique(.x$data_source))
         ))

[[1]]

Past versions of pCO2_climatology_map-1.png

Version	Author	Date
cd8e0d5	jens-daniel-mueller	2021-08-06
15773a0	jens-daniel-mueller	2021-08-06
340d731	jens-daniel-mueller	2021-08-06
71546e4	jens-daniel-mueller	2021-08-06
42e80c0	jens-daniel-mueller	2021-08-04
48f6eed	jens-daniel-mueller	2021-08-04
912d90e	jens-daniel-mueller	2021-07-23
2477316	jens-daniel-mueller	2021-07-23
768ae83	jens-daniel-mueller	2021-07-22
78fe930	jens-daniel-mueller	2021-07-21
bef1b71	jens-daniel-mueller	2021-07-09

[[2]]

Past versions of pCO2_climatology_map-2.png

Version	Author	Date
cd8e0d5	jens-daniel-mueller	2021-08-06
15773a0	jens-daniel-mueller	2021-08-06
340d731	jens-daniel-mueller	2021-08-06
71546e4	jens-daniel-mueller	2021-08-06
42e80c0	jens-daniel-mueller	2021-08-04
48f6eed	jens-daniel-mueller	2021-08-04
912d90e	jens-daniel-mueller	2021-07-23
2477316	jens-daniel-mueller	2021-07-23
768ae83	jens-daniel-mueller	2021-07-22
78fe930	jens-daniel-mueller	2021-07-21
bef1b71	jens-daniel-mueller	2021-07-09

4.2.3 Revelle factor

Plots below show the calculated climatological Revelle factor values.

predictors_surface <- predictors_surface %>%
  mutate(
    rev_fac = buffer(
      flag = 15,
      var1 = TAlk * 1e-6,
      var2 = TCO2 * 1e-6,
      S = sal,
      T = temp,
      P = depth / 10,
      Pt = phosphate * 1e-6,
      Sit = silicate * 1e-6,
      k1k2 = "l"
    )$BetaD
  )

predictors_surface %>%
  group_split(data_source) %>%
  # head(1) %>%
  map( ~
         p_map_climatology(
           df = .x,
           var = "rev_fac",
           subtitle_text = paste("Data source: ", unique(.x$data_source))
         ))

[[1]]

Past versions of revelle_factor_climatology_map-1.png

Version	Author	Date
cd8e0d5	jens-daniel-mueller	2021-08-06
15773a0	jens-daniel-mueller	2021-08-06
340d731	jens-daniel-mueller	2021-08-06
71546e4	jens-daniel-mueller	2021-08-06
42e80c0	jens-daniel-mueller	2021-08-04
48f6eed	jens-daniel-mueller	2021-08-04
912d90e	jens-daniel-mueller	2021-07-23
2477316	jens-daniel-mueller	2021-07-23
768ae83	jens-daniel-mueller	2021-07-22
78fe930	jens-daniel-mueller	2021-07-21
bef1b71	jens-daniel-mueller	2021-07-09

[[2]]

Past versions of revelle_factor_climatology_map-2.png

Version	Author	Date
cd8e0d5	jens-daniel-mueller	2021-08-06
15773a0	jens-daniel-mueller	2021-08-06
340d731	jens-daniel-mueller	2021-08-06
71546e4	jens-daniel-mueller	2021-08-06
42e80c0	jens-daniel-mueller	2021-08-04
48f6eed	jens-daniel-mueller	2021-08-04
912d90e	jens-daniel-mueller	2021-07-23
2477316	jens-daniel-mueller	2021-07-23
768ae83	jens-daniel-mueller	2021-07-22
78fe930	jens-daniel-mueller	2021-07-21
bef1b71	jens-daniel-mueller	2021-07-09

predictors_surface %>%
  group_split(data_source) %>%
  head(1) %>%
  map( ~
         p_section_climatology_regular(
           df = .x,
           var = "rev_fac",
           surface = "y",
           subtitle_text = paste("Data source: ", unique(.x$data_source))
         ))

4.2.4 dcant calculation

# calculate increase in atm pCO2 between eras
co2_atm_tref <- co2_atm_tref %>%
  arrange(pCO2_tref) %>%
  mutate(d_pCO2_tref = pCO2_tref - lag(pCO2_tref)) %>%
  drop_na() %>%
  select(d_pCO2_tref)

dcant_surface <- full_join(predictors_surface, co2_atm_tref,
                           by = character())

# calculate cant
dcant_surface <- dcant_surface %>%
  mutate(dcant = (1 / rev_fac) *
           (TCO2 / pCO2) * d_pCO2_tref)

# calculate positive cant
dcant_surface <- dcant_surface %>%
  mutate(dcant_pos = if_else(dcant < 0, 0, dcant)) %>% 
  select(lon, lat, data_source, dcant, dcant_pos)


dcant_surface <- full_join(
  dcant_surface,
  predictors_surface_all_depth
)

4.2.5 Sea surface observations

surface_mod <- surface_mod %>% 
  rename(tco2 = dissicos,
         talk = talkos,
         phosphate = po4os,
         pco2 = spco2,
         temp = tos) %>% 
  mutate(tco2 = tco2 * 1e3,
         phosphate = phosphate * 1e3) %>% 
  mutate(cstar = b_cstar_phosphate(tco2 = tco2,
                                   phosphate = phosphate,
                                   talk = talk))
surface_obs <- surface_obs %>% 
  select(lon, lat, year, temp, tco2, talk, pco2 = pCO2)

surface <- bind_rows(
  surface_mod %>% mutate(data_source = "mod"),
  surface_obs %>% mutate(data_source = "obs")
)

surface <- expand_grid(surface, tref)

surface <- surface %>%
  filter(year >= start & year <= end) %>% 
  select(-c(start, end, year, era))

surface <- surface %>% 
  group_by(lon, lat, median_year, data_source) %>% 
  summarise(across(where(is.numeric), ~ mean(.x, na.rm = TRUE))) %>% 
  ungroup()


surface_wide <- surface %>% 
  pivot_longer(tco2:cstar,
               names_to = "parameter",
               values_to = "value") %>% 
  pivot_wider(names_from = median_year,
              values_from = value)

surface_wide <- surface_wide %>% 
  mutate(d = !!sym(as.character(sort(tref$median_year)[2])) -
           !!sym(as.character(sort(tref$median_year)[1])))

surface_trend <- surface_wide %>% 
  select(lon, lat, parameter, data_source, d)

surface_trend %>%
  group_by(parameter) %>%
  group_split() %>%
  # head(1) %>%
  map(
    ~ map +
      geom_raster(data = .x,
                  aes(lon, lat, fill = d)) +
      scale_fill_divergent(name = unique(.x$parameter)) +
      facet_grid(data_source~.) +
      labs(title = paste("Decadel change:", tref$era[1], "to", tref$era[2]))
  )

[[1]]

Past versions of calc_dcant_surface_based_on_surface_observations-1.png

Version	Author	Date
cd8e0d5	jens-daniel-mueller	2021-08-06
15773a0	jens-daniel-mueller	2021-08-06
340d731	jens-daniel-mueller	2021-08-06
71546e4	jens-daniel-mueller	2021-08-06
42e80c0	jens-daniel-mueller	2021-08-04
48f6eed	jens-daniel-mueller	2021-08-04
e92e157	jens-daniel-mueller	2021-08-04
9736844	jens-daniel-mueller	2021-08-04

[[2]]

Past versions of calc_dcant_surface_based_on_surface_observations-2.png

Version	Author	Date
cd8e0d5	jens-daniel-mueller	2021-08-06
15773a0	jens-daniel-mueller	2021-08-06
8933b37	jens-daniel-mueller	2021-08-06
71546e4	jens-daniel-mueller	2021-08-06
42e80c0	jens-daniel-mueller	2021-08-04
48f6eed	jens-daniel-mueller	2021-08-04
e92e157	jens-daniel-mueller	2021-08-04
9736844	jens-daniel-mueller	2021-08-04

[[3]]

Past versions of calc_dcant_surface_based_on_surface_observations-3.png

Version	Author	Date
cd8e0d5	jens-daniel-mueller	2021-08-06
15773a0	jens-daniel-mueller	2021-08-06
8933b37	jens-daniel-mueller	2021-08-06
71546e4	jens-daniel-mueller	2021-08-06
42e80c0	jens-daniel-mueller	2021-08-04
48f6eed	jens-daniel-mueller	2021-08-04
e92e157	jens-daniel-mueller	2021-08-04
9736844	jens-daniel-mueller	2021-08-04

[[4]]

Past versions of calc_dcant_surface_based_on_surface_observations-4.png

Version	Author	Date
cd8e0d5	jens-daniel-mueller	2021-08-06
15773a0	jens-daniel-mueller	2021-08-06
8933b37	jens-daniel-mueller	2021-08-06
71546e4	jens-daniel-mueller	2021-08-06
42e80c0	jens-daniel-mueller	2021-08-04
48f6eed	jens-daniel-mueller	2021-08-04
e92e157	jens-daniel-mueller	2021-08-04
9736844	jens-daniel-mueller	2021-08-04

[[5]]

Past versions of calc_dcant_surface_based_on_surface_observations-5.png

Version	Author	Date
cd8e0d5	jens-daniel-mueller	2021-08-06
15773a0	jens-daniel-mueller	2021-08-06
8933b37	jens-daniel-mueller	2021-08-06
71546e4	jens-daniel-mueller	2021-08-06
42e80c0	jens-daniel-mueller	2021-08-04
48f6eed	jens-daniel-mueller	2021-08-04
e92e157	jens-daniel-mueller	2021-08-04
9736844	jens-daniel-mueller	2021-08-04

[[6]]

Past versions of calc_dcant_surface_based_on_surface_observations-6.png

Version	Author	Date
cd8e0d5	jens-daniel-mueller	2021-08-06
15773a0	jens-daniel-mueller	2021-08-06
8933b37	jens-daniel-mueller	2021-08-06
71546e4	jens-daniel-mueller	2021-08-06
42e80c0	jens-daniel-mueller	2021-08-04
48f6eed	jens-daniel-mueller	2021-08-04
e92e157	jens-daniel-mueller	2021-08-04
9736844	jens-daniel-mueller	2021-08-04

4.2.6 Control plots

dcant_surface %>%
  group_split(data_source) %>%
  # head(1) %>%
  map( ~
         p_map_climatology(
           df = .x,
           var = "dcant",
           subtitle_text = paste("Data source: ", unique(.x$data_source))
         ))

[[1]]

Past versions of dcant_surface_climatology_map-1.png

Version	Author	Date
cd8e0d5	jens-daniel-mueller	2021-08-06
15773a0	jens-daniel-mueller	2021-08-06
340d731	jens-daniel-mueller	2021-08-06
71546e4	jens-daniel-mueller	2021-08-06
42e80c0	jens-daniel-mueller	2021-08-04
48f6eed	jens-daniel-mueller	2021-08-04
88f7356	jens-daniel-mueller	2021-08-02
127b801	jens-daniel-mueller	2021-07-24
912d90e	jens-daniel-mueller	2021-07-23
2477316	jens-daniel-mueller	2021-07-23
bef1b71	jens-daniel-mueller	2021-07-09

[[2]]

Past versions of dcant_surface_climatology_map-2.png

Version	Author	Date
cd8e0d5	jens-daniel-mueller	2021-08-06
15773a0	jens-daniel-mueller	2021-08-06
340d731	jens-daniel-mueller	2021-08-06
71546e4	jens-daniel-mueller	2021-08-06
42e80c0	jens-daniel-mueller	2021-08-04
48f6eed	jens-daniel-mueller	2021-08-04
88f7356	jens-daniel-mueller	2021-08-02
127b801	jens-daniel-mueller	2021-07-24
912d90e	jens-daniel-mueller	2021-07-23
2477316	jens-daniel-mueller	2021-07-23
bef1b71	jens-daniel-mueller	2021-07-09

dcant_surface %>%
  group_split(data_source) %>%
  # head(1) %>%
  map( ~
         p_section_climatology_regular(
           df = .x,
           var = "dcant",
           surface = "y",
           subtitle_text = paste("Data source: ", unique(.x$data_source))
         ))

[[1]]

Past versions of dcant_surface_climatology_sections-1.png

Version	Author	Date
cd8e0d5	jens-daniel-mueller	2021-08-06
15773a0	jens-daniel-mueller	2021-08-06
340d731	jens-daniel-mueller	2021-08-06
71546e4	jens-daniel-mueller	2021-08-06
42e80c0	jens-daniel-mueller	2021-08-04
48f6eed	jens-daniel-mueller	2021-08-04
88f7356	jens-daniel-mueller	2021-08-02
127b801	jens-daniel-mueller	2021-07-24
912d90e	jens-daniel-mueller	2021-07-23
2477316	jens-daniel-mueller	2021-07-23
c9ccc00	jens-daniel-mueller	2021-07-22
c75b2a0	jens-daniel-mueller	2021-07-22
768ae83	jens-daniel-mueller	2021-07-22
78fe930	jens-daniel-mueller	2021-07-21
bef1b71	jens-daniel-mueller	2021-07-09

[[2]]

Past versions of dcant_surface_climatology_sections-2.png

Version	Author	Date
cd8e0d5	jens-daniel-mueller	2021-08-06
15773a0	jens-daniel-mueller	2021-08-06
340d731	jens-daniel-mueller	2021-08-06
71546e4	jens-daniel-mueller	2021-08-06
42e80c0	jens-daniel-mueller	2021-08-04
48f6eed	jens-daniel-mueller	2021-08-04
88f7356	jens-daniel-mueller	2021-08-02
127b801	jens-daniel-mueller	2021-07-24
912d90e	jens-daniel-mueller	2021-07-23
2477316	jens-daniel-mueller	2021-07-23
c9ccc00	jens-daniel-mueller	2021-07-22
c75b2a0	jens-daniel-mueller	2021-07-22
768ae83	jens-daniel-mueller	2021-07-22
78fe930	jens-daniel-mueller	2021-07-21
bef1b71	jens-daniel-mueller	2021-07-09

4.2.7 Surf, equi, truth

surface_dcant_comparison <- bind_rows(
  surface_trend %>%
    filter(data_source == "mod",
           parameter == "cstar") %>%
    select(lon, lat, dcant = d) %>%
    mutate(data_source = "surface_obs"),
  dcant_surface %>%
    filter(data_source == "mod",
           depth == 5) %>%
    select(lon, lat, dcant) %>%
    mutate(data_source = "surface_equi"),
  dcant_surface_mod_truth %>%
    select(lon, lat, dcant) %>%
    mutate(data_source = "mod_truth")
)

p_map_dcant_slab(df = surface_dcant_comparison,
                  var = "dcant",
                 title_text = "Sea surface maps") +
  facet_grid(data_source ~ .)

Past versions of surf_equi_truth-1.png

Version	Author	Date
cd8e0d5	jens-daniel-mueller	2021-08-06
15773a0	jens-daniel-mueller	2021-08-06
da61d1a	jens-daniel-mueller	2021-08-06
1010198	jens-daniel-mueller	2021-08-06

surface_dcant_comparison_bias <- surface_dcant_comparison %>% 
  pivot_wider(names_from = data_source,
              values_from = dcant) %>% 
  mutate(surface_obs_bias = surface_obs - mod_truth,
         surface_equi_bias = surface_equi - mod_truth) %>% 
  select(lon, lat, surface_obs_bias, surface_equi_bias) %>% 
  pivot_longer(surface_obs_bias:surface_equi_bias,
               names_to = "data_source",
               values_to = "dcant_bias")

p_map_dcant_slab(df = surface_dcant_comparison_bias,
                  var = "dcant_bias",
                 col = "bias",
                 title_text = "Sea surface maps") +
  facet_grid(data_source ~ .)

Past versions of surf_equi_truth_bias-1.png

Version	Author	Date
cd8e0d5	jens-daniel-mueller	2021-08-06
15773a0	jens-daniel-mueller	2021-08-06
da61d1a	jens-daniel-mueller	2021-08-06
1010198	jens-daniel-mueller	2021-08-06

4.3 Average model dcant

Mean and sd are calculated across 10 models for Cant in each grid cell (XYZ), basin and era combination. Calculations are performed for all cant values vs positive values only.

4.3.1 Deep water averaging

dcant_average <- m_dcant_3d_average(dcant)
dcant_average <- m_cut_gamma(dcant_average, "gamma")

# split data set for individual predictor contributions and total cant
dcant_predictor_3d <- dcant_average %>% 
  select(-c("dcant", "dcant_pos", ends_with("_sd")))

dcant_average <- dcant_average %>%
  select(
    lon,
    lat,
    depth,
    basin_AIP,
    data_source,
    dcant,
    dcant_pos,
    dcant_sd,
    dcant_pos_sd,
    gamma,
    gamma_sd,
    gamma_slab
  )

dcant_average %>%
  group_split(data_source) %>%
  # head(1) %>% 
  map(~ p_map_climatology(
    df = .x,
    var = "dcant_pos",
    subtitle_text = paste("data_source:", unique(.x$data_source))
  ))

[[1]]

Past versions of cant_deep_climatology_map-1.png

Version	Author	Date
cd8e0d5	jens-daniel-mueller	2021-08-06
15773a0	jens-daniel-mueller	2021-08-06
da61d1a	jens-daniel-mueller	2021-08-06
340d731	jens-daniel-mueller	2021-08-06
71546e4	jens-daniel-mueller	2021-08-06
29444a1	jens-daniel-mueller	2021-08-05
42e80c0	jens-daniel-mueller	2021-08-04
48f6eed	jens-daniel-mueller	2021-08-04
81a46a4	jens-daniel-mueller	2021-08-03
b88c61b	jens-daniel-mueller	2021-08-03
a53656d	jens-daniel-mueller	2021-08-03
88f7356	jens-daniel-mueller	2021-08-02
d759279	jens-daniel-mueller	2021-08-02
127b801	jens-daniel-mueller	2021-07-24
912d90e	jens-daniel-mueller	2021-07-23
2477316	jens-daniel-mueller	2021-07-23
c9ccc00	jens-daniel-mueller	2021-07-22
bef1b71	jens-daniel-mueller	2021-07-09

[[2]]

Past versions of cant_deep_climatology_map-2.png

Version	Author	Date
cd8e0d5	jens-daniel-mueller	2021-08-06
15773a0	jens-daniel-mueller	2021-08-06
da61d1a	jens-daniel-mueller	2021-08-06
340d731	jens-daniel-mueller	2021-08-06
71546e4	jens-daniel-mueller	2021-08-06
29444a1	jens-daniel-mueller	2021-08-05
42e80c0	jens-daniel-mueller	2021-08-04
48f6eed	jens-daniel-mueller	2021-08-04
81a46a4	jens-daniel-mueller	2021-08-03
b88c61b	jens-daniel-mueller	2021-08-03
a53656d	jens-daniel-mueller	2021-08-03
88f7356	jens-daniel-mueller	2021-08-02
d759279	jens-daniel-mueller	2021-08-02
127b801	jens-daniel-mueller	2021-07-24
912d90e	jens-daniel-mueller	2021-07-23
2477316	jens-daniel-mueller	2021-07-23
c9ccc00	jens-daniel-mueller	2021-07-22
bef1b71	jens-daniel-mueller	2021-07-09

dcant_average %>%
  group_split(data_source) %>%
  # head(1) %>% 
  map(~ p_section_climatology_regular(
    df = .x,
    surface = "n",
    var = "dcant_pos",
    subtitle_text = paste("data_source:", unique(.x$data_source))
  ))

[[1]]

Past versions of dcant_deep_climatology_sections-1.png

Version	Author	Date
cd8e0d5	jens-daniel-mueller	2021-08-06
15773a0	jens-daniel-mueller	2021-08-06
da61d1a	jens-daniel-mueller	2021-08-06
340d731	jens-daniel-mueller	2021-08-06
71546e4	jens-daniel-mueller	2021-08-06
29444a1	jens-daniel-mueller	2021-08-05
42e80c0	jens-daniel-mueller	2021-08-04
48f6eed	jens-daniel-mueller	2021-08-04
81a46a4	jens-daniel-mueller	2021-08-03
b88c61b	jens-daniel-mueller	2021-08-03

[[2]]

Past versions of dcant_deep_climatology_sections-2.png

Version	Author	Date
cd8e0d5	jens-daniel-mueller	2021-08-06
15773a0	jens-daniel-mueller	2021-08-06
da61d1a	jens-daniel-mueller	2021-08-06
340d731	jens-daniel-mueller	2021-08-06
71546e4	jens-daniel-mueller	2021-08-06
29444a1	jens-daniel-mueller	2021-08-05
42e80c0	jens-daniel-mueller	2021-08-04
48f6eed	jens-daniel-mueller	2021-08-04
81a46a4	jens-daniel-mueller	2021-08-03
b88c61b	jens-daniel-mueller	2021-08-03

4.3.2 Surface water averaging

The averaging function is also applied to the surface data, although only one value per grid cell was mapped, to ensure consistency with the deep water values.

dcant_surface_average <-
  m_dcant_3d_average(dcant_surface)

dcant_surface_average <- m_cut_gamma(dcant_surface_average, "gamma")
rm(dcant_surface)

4.4 Join surface and deep water

if (surface_data) {
  dcant_3d <-
  full_join(
    dcant_average %>% mutate(method = "eMLR"),
    dcant_surface_average %>%  mutate(method = "surface")
  )
} else {
  dcant_3d <- dcant_average %>% mutate(method = "eMLR")
}



rm(dcant_surface_average, dcant_average)

4.5 Zonal sections

For each basin and era combination, the zonal mean dcant is calculated, again for all vs positive only values. Likewise, sd is calculated for the averaging of the mean basin fields.

dcant_zonal <- dcant_3d %>%
  group_by(data_source) %>%
  nest() %>%
  mutate(zonal = map(.x = data, ~m_zonal_mean_sd(.x))) %>%
  select(-data) %>%
  unnest(zonal)

dcant_zonal <- m_cut_gamma(dcant_zonal,
                           "gamma_mean")

dcant_zonal_method <- dcant_3d %>%
  group_by(data_source, method) %>%
  nest() %>%
  mutate(zonal = map(.x = data, ~m_zonal_mean_sd(.x))) %>%
  select(-data) %>%
  unnest(zonal)

dcant_zonal_method <- m_cut_gamma(dcant_zonal_method,
                                   "gamma_mean")

dcant_zonal <- dcant_zonal %>% 
  rename(dcant = dcant_mean,
         dcant_pos = dcant_pos_mean) %>% 
  select(-c(dcant_sd_sd, dcant_pos_sd_sd,
            gamma_sd_mean, gamma_sd_sd))

dcant_zonal_method <- dcant_zonal_method %>% 
  rename(dcant = dcant_mean,
         dcant_pos = dcant_pos_mean) %>% 
  select(-c(dcant_sd_sd, dcant_pos_sd_sd,
            gamma_sd_mean, gamma_sd_sd))

4.6 Mean dcant sections by coefficient

For each basin and era combination, the zonal mean is calculated for the term of each predictor.

dcant_predictor_zonal <- dcant_predictor_3d %>%
  group_by(data_source) %>%
  nest() %>%
  mutate(zonal = map(.x = data, ~m_zonal_mean_sd(.x))) %>%
  select(-data) %>%
  unnest(zonal)

dcant_predictor_zonal <-
  m_cut_gamma(dcant_predictor_zonal, "gamma_mean")

4.7 Inventory calculation

To calculate dcant column inventories, we:

1. Convert dcant concentrations to volumetric units
2. Multiply layer thickness with volumetric dcant concentration to get a layer inventory
3. For each horizontal grid cell and era, sum dcant layer inventories for different inventory depths (100, 500, 1000, 3000, 10^{4} m)

Step 2 is performed separately for all dcant and positive dcant values only.

4.7.1 Full water column

dcant_inv <- dcant_3d %>%
  group_by(data_source) %>%
  nest() %>%
  mutate(inv = map(.x = data, ~m_dcant_inv(.x))) %>%
  select(-data) %>%
  unnest(inv)

p_map_cant_inv(df = dcant_inv,
               var = "dcant_pos",
               subtitle_text = "for predefined integration depths") +
  facet_grid(inv_depth ~ data_source)

Past versions of cant_inventories-1.png

Version	Author	Date
cd8e0d5	jens-daniel-mueller	2021-08-06
15773a0	jens-daniel-mueller	2021-08-06
da61d1a	jens-daniel-mueller	2021-08-06
340d731	jens-daniel-mueller	2021-08-06
71546e4	jens-daniel-mueller	2021-08-06
29444a1	jens-daniel-mueller	2021-08-05
42e80c0	jens-daniel-mueller	2021-08-04
48f6eed	jens-daniel-mueller	2021-08-04
81a46a4	jens-daniel-mueller	2021-08-03
b88c61b	jens-daniel-mueller	2021-08-03
a53656d	jens-daniel-mueller	2021-08-03
88f7356	jens-daniel-mueller	2021-08-02
d759279	jens-daniel-mueller	2021-08-02
127b801	jens-daniel-mueller	2021-07-24
912d90e	jens-daniel-mueller	2021-07-23
2477316	jens-daniel-mueller	2021-07-23
c9ccc00	jens-daniel-mueller	2021-07-22
768ae83	jens-daniel-mueller	2021-07-22
78fe930	jens-daniel-mueller	2021-07-21
971ce87	jens-daniel-mueller	2021-07-13
bef1b71	jens-daniel-mueller	2021-07-09

if (surface_data == FALSE){
  dcant_inv <- dcant_inv %>% 
    mutate(method = "total")
}

4.7.2 Surface layer

dcant_inv_surface <- dcant_3d %>%
  filter(method == "surface") %>% 
  group_by(data_source) %>%
  nest() %>%
  mutate(inv = map(.x = data, ~m_dcant_inv(.x))) %>%
  select(-data) %>%
  unnest(inv)

p_map_cant_inv(df = dcant_inv_surface %>% 
                 filter(inv_depth < 1000),
               var = "dcant_pos",
               subtitle_text = "for predefined integration depths",
               breaks = c(-Inf,seq(0,4,0.5), Inf)) +
  facet_grid(inv_depth ~ data_source)

Past versions of cant_inventories_surface-1.png

Version	Author	Date
cd8e0d5	jens-daniel-mueller	2021-08-06
15773a0	jens-daniel-mueller	2021-08-06
340d731	jens-daniel-mueller	2021-08-06
71546e4	jens-daniel-mueller	2021-08-06
42e80c0	jens-daniel-mueller	2021-08-04
48f6eed	jens-daniel-mueller	2021-08-04
88f7356	jens-daniel-mueller	2021-08-02
127b801	jens-daniel-mueller	2021-07-24
912d90e	jens-daniel-mueller	2021-07-23
2477316	jens-daniel-mueller	2021-07-23
c9ccc00	jens-daniel-mueller	2021-07-22
c75b2a0	jens-daniel-mueller	2021-07-22

4.7.3 eMLR only

dcant_inv <- full_join(
  dcant_inv %>% rename(dcant_total = dcant,
                       dcant_pos_total = dcant_pos),
  dcant_inv_surface %>% rename(dcant_surface = dcant,
                               dcant_pos_surface = dcant_pos)
)

dcant_inv <- dcant_inv %>%
  mutate(dcant_eMLR = dcant_total -
           replace(dcant_surface, is.na(dcant_surface), 0),
         dcant_pos_eMLR = dcant_pos_total -
           replace(dcant_pos_surface, is.na(dcant_pos_surface), 0))

dcant_inv_all <- dcant_inv %>% 
  select(-starts_with("dcant_pos")) %>% 
  pivot_longer(starts_with("dcant_"),
               names_to = "method",
               names_prefix = "dcant_",
               values_to = "dcant")

dcant_inv_pos <- dcant_inv %>% 
  select(data_source, lon, lat, basin_AIP, inv_depth,
         starts_with("dcant_pos_")) %>% 
  pivot_longer(starts_with("dcant_pos_"),
               names_to = "method",
               names_prefix = "dcant_pos_",
               values_to = "dcant_pos")

dcant_inv <- full_join(
  dcant_inv_all,
  dcant_inv_pos
)

rm(dcant_inv_all, dcant_inv_pos, dcant_inv_surface)

dcant_inv %>%
  group_by(inv_depth) %>%
  group_split() %>% 
  # tail(1) %>%
  map(
    ~ p_map_cant_inv(df = .x,
                     var = "dcant",
                     subtitle_text = paste("Integration depth",
                                           unique(.x$inv_depth))) +
      facet_grid(method ~ data_source)
  )

[[1]]

Past versions of combine_dcant_inventories-1.png

Version	Author	Date
cd8e0d5	jens-daniel-mueller	2021-08-06
15773a0	jens-daniel-mueller	2021-08-06
340d731	jens-daniel-mueller	2021-08-06
71546e4	jens-daniel-mueller	2021-08-06
42e80c0	jens-daniel-mueller	2021-08-04
48f6eed	jens-daniel-mueller	2021-08-04
81a46a4	jens-daniel-mueller	2021-08-03
b88c61b	jens-daniel-mueller	2021-08-03
a53656d	jens-daniel-mueller	2021-08-03
88f7356	jens-daniel-mueller	2021-08-02
d759279	jens-daniel-mueller	2021-08-02
127b801	jens-daniel-mueller	2021-07-24
912d90e	jens-daniel-mueller	2021-07-23
2477316	jens-daniel-mueller	2021-07-23
c9ccc00	jens-daniel-mueller	2021-07-22
c75b2a0	jens-daniel-mueller	2021-07-22

[[2]]

Past versions of combine_dcant_inventories-2.png

Version	Author	Date
cd8e0d5	jens-daniel-mueller	2021-08-06
15773a0	jens-daniel-mueller	2021-08-06
da61d1a	jens-daniel-mueller	2021-08-06
340d731	jens-daniel-mueller	2021-08-06
71546e4	jens-daniel-mueller	2021-08-06
29444a1	jens-daniel-mueller	2021-08-05
42e80c0	jens-daniel-mueller	2021-08-04
48f6eed	jens-daniel-mueller	2021-08-04
81a46a4	jens-daniel-mueller	2021-08-03
b88c61b	jens-daniel-mueller	2021-08-03
a53656d	jens-daniel-mueller	2021-08-03
88f7356	jens-daniel-mueller	2021-08-02
d759279	jens-daniel-mueller	2021-08-02
127b801	jens-daniel-mueller	2021-07-24
912d90e	jens-daniel-mueller	2021-07-23
2477316	jens-daniel-mueller	2021-07-23
c9ccc00	jens-daniel-mueller	2021-07-22
c75b2a0	jens-daniel-mueller	2021-07-22

[[3]]

Past versions of combine_dcant_inventories-3.png

Version	Author	Date
cd8e0d5	jens-daniel-mueller	2021-08-06
15773a0	jens-daniel-mueller	2021-08-06
da61d1a	jens-daniel-mueller	2021-08-06
340d731	jens-daniel-mueller	2021-08-06
71546e4	jens-daniel-mueller	2021-08-06
29444a1	jens-daniel-mueller	2021-08-05
42e80c0	jens-daniel-mueller	2021-08-04
48f6eed	jens-daniel-mueller	2021-08-04
81a46a4	jens-daniel-mueller	2021-08-03
b88c61b	jens-daniel-mueller	2021-08-03
a53656d	jens-daniel-mueller	2021-08-03
88f7356	jens-daniel-mueller	2021-08-02
d759279	jens-daniel-mueller	2021-08-02
127b801	jens-daniel-mueller	2021-07-24
912d90e	jens-daniel-mueller	2021-07-23
2477316	jens-daniel-mueller	2021-07-23
c9ccc00	jens-daniel-mueller	2021-07-22
c75b2a0	jens-daniel-mueller	2021-07-22

[[4]]

Past versions of combine_dcant_inventories-4.png

Version	Author	Date
cd8e0d5	jens-daniel-mueller	2021-08-06
15773a0	jens-daniel-mueller	2021-08-06
da61d1a	jens-daniel-mueller	2021-08-06
340d731	jens-daniel-mueller	2021-08-06
71546e4	jens-daniel-mueller	2021-08-06
29444a1	jens-daniel-mueller	2021-08-05
42e80c0	jens-daniel-mueller	2021-08-04
48f6eed	jens-daniel-mueller	2021-08-04
81a46a4	jens-daniel-mueller	2021-08-03
b88c61b	jens-daniel-mueller	2021-08-03
a53656d	jens-daniel-mueller	2021-08-03
88f7356	jens-daniel-mueller	2021-08-02
d759279	jens-daniel-mueller	2021-08-02
127b801	jens-daniel-mueller	2021-07-24
912d90e	jens-daniel-mueller	2021-07-23
2477316	jens-daniel-mueller	2021-07-23
c9ccc00	jens-daniel-mueller	2021-07-22
c75b2a0	jens-daniel-mueller	2021-07-22

[[5]]

Past versions of combine_dcant_inventories-5.png

Version	Author	Date
cd8e0d5	jens-daniel-mueller	2021-08-06
15773a0	jens-daniel-mueller	2021-08-06
da61d1a	jens-daniel-mueller	2021-08-06
340d731	jens-daniel-mueller	2021-08-06
71546e4	jens-daniel-mueller	2021-08-06
29444a1	jens-daniel-mueller	2021-08-05
42e80c0	jens-daniel-mueller	2021-08-04
48f6eed	jens-daniel-mueller	2021-08-04
81a46a4	jens-daniel-mueller	2021-08-03
b88c61b	jens-daniel-mueller	2021-08-03
a53656d	jens-daniel-mueller	2021-08-03
88f7356	jens-daniel-mueller	2021-08-02
d759279	jens-daniel-mueller	2021-08-02
127b801	jens-daniel-mueller	2021-07-24
912d90e	jens-daniel-mueller	2021-07-23
2477316	jens-daniel-mueller	2021-07-23
c9ccc00	jens-daniel-mueller	2021-07-22
c75b2a0	jens-daniel-mueller	2021-07-22

4.8 Budgets

Global dcant budgets were estimated in units of Pg C. Please note that here we added dcant (all vs postitive only) values and do not apply additional corrections for areas not covered.

dcant_budget_global <- m_dcant_budget(dcant_inv)

dcant_budget_global %>%
  filter(inv_depth == params_global$inventory_depth_standard,
         method == "total") %>%
  ggplot(aes(estimate, value)) +
  scale_fill_brewer(palette = "Dark2") +
  geom_col() +
  facet_grid(~data_source)

Past versions of budget_global-1.png

Version	Author	Date
cd8e0d5	jens-daniel-mueller	2021-08-06
15773a0	jens-daniel-mueller	2021-08-06
da61d1a	jens-daniel-mueller	2021-08-06
340d731	jens-daniel-mueller	2021-08-06
71546e4	jens-daniel-mueller	2021-08-06
29444a1	jens-daniel-mueller	2021-08-05
42e80c0	jens-daniel-mueller	2021-08-04
48f6eed	jens-daniel-mueller	2021-08-04
81a46a4	jens-daniel-mueller	2021-08-03
b88c61b	jens-daniel-mueller	2021-08-03
a53656d	jens-daniel-mueller	2021-08-03
88f7356	jens-daniel-mueller	2021-08-02
d759279	jens-daniel-mueller	2021-08-02
127b801	jens-daniel-mueller	2021-07-24
912d90e	jens-daniel-mueller	2021-07-23
2477316	jens-daniel-mueller	2021-07-23
c9ccc00	jens-daniel-mueller	2021-07-22
c75b2a0	jens-daniel-mueller	2021-07-22
768ae83	jens-daniel-mueller	2021-07-22
78fe930	jens-daniel-mueller	2021-07-21
bef1b71	jens-daniel-mueller	2021-07-09

dcant_budget_global %>%
  filter(inv_depth == params_global$inventory_depth_standard,
         method %in% c("surface", "eMLR")) %>%
  ggplot(aes(estimate, value, fill=method)) +
  scale_fill_brewer(palette = "Dark2") +
  geom_col() +
  facet_grid(.~data_source)

Past versions of budget_global_surface-1.png

Version	Author	Date
cd8e0d5	jens-daniel-mueller	2021-08-06
15773a0	jens-daniel-mueller	2021-08-06
da61d1a	jens-daniel-mueller	2021-08-06
340d731	jens-daniel-mueller	2021-08-06
71546e4	jens-daniel-mueller	2021-08-06
29444a1	jens-daniel-mueller	2021-08-05
42e80c0	jens-daniel-mueller	2021-08-04
48f6eed	jens-daniel-mueller	2021-08-04
81a46a4	jens-daniel-mueller	2021-08-03
b88c61b	jens-daniel-mueller	2021-08-03
a53656d	jens-daniel-mueller	2021-08-03
88f7356	jens-daniel-mueller	2021-08-02
d759279	jens-daniel-mueller	2021-08-02
127b801	jens-daniel-mueller	2021-07-24
912d90e	jens-daniel-mueller	2021-07-23
2477316	jens-daniel-mueller	2021-07-23
c9ccc00	jens-daniel-mueller	2021-07-22
c75b2a0	jens-daniel-mueller	2021-07-22

dcant_budget_basin_AIP <- dcant_inv %>% 
  group_by(basin_AIP) %>%
  nest() %>% 
  mutate(budget = map(.x = data, ~m_dcant_budget(.x))) %>% 
  select(-data) %>%
  unnest(budget)

dcant_budget_basin_AIP %>%
  filter(inv_depth == params_global$inventory_depth_standard,
         method %in% c("surface", "eMLR")) %>%
  ggplot(aes(basin_AIP, value, fill=method)) +
  scale_fill_brewer(palette = "Dark2") +
  geom_col() +
  facet_grid(estimate~data_source)

Past versions of budget_basin_AIP_fig-1.png

Version	Author	Date
cd8e0d5	jens-daniel-mueller	2021-08-06
15773a0	jens-daniel-mueller	2021-08-06
da61d1a	jens-daniel-mueller	2021-08-06
340d731	jens-daniel-mueller	2021-08-06
71546e4	jens-daniel-mueller	2021-08-06
29444a1	jens-daniel-mueller	2021-08-05
42e80c0	jens-daniel-mueller	2021-08-04

dcant_budget_basin_MLR <-
  full_join(dcant_inv, basinmask) %>%
  group_by(basin, MLR_basins) %>%
  nest() %>%
  mutate(budget = map(.x = data, ~ m_dcant_budget(.x))) %>%
  select(-data) %>%
  unnest(budget)

dcant_budget_basin_MLR %>%
  filter(inv_depth == params_global$inventory_depth_standard,
         method %in% c("surface", "eMLR")) %>%
  group_by(MLR_basins) %>%
  group_split() %>%
  # head(1) %>%
  map(
    ~ ggplot(data = .x,
             aes(basin, value, fill = method)) +
      scale_fill_brewer(palette = "Dark2") +
      geom_col() +
      facet_grid(estimate ~ data_source) +
      labs(title = paste("MLR_basins:", unique(.x$MLR_basins)))
  )

[[1]]

Past versions of budget_MLR_regions_fig-1.png

Version	Author	Date
cd8e0d5	jens-daniel-mueller	2021-08-06
15773a0	jens-daniel-mueller	2021-08-06
da61d1a	jens-daniel-mueller	2021-08-06
340d731	jens-daniel-mueller	2021-08-06
71546e4	jens-daniel-mueller	2021-08-06
29444a1	jens-daniel-mueller	2021-08-05
42e80c0	jens-daniel-mueller	2021-08-04

[[2]]

Past versions of budget_MLR_regions_fig-2.png

Version	Author	Date
cd8e0d5	jens-daniel-mueller	2021-08-06
15773a0	jens-daniel-mueller	2021-08-06
da61d1a	jens-daniel-mueller	2021-08-06
340d731	jens-daniel-mueller	2021-08-06
71546e4	jens-daniel-mueller	2021-08-06
29444a1	jens-daniel-mueller	2021-08-05
42e80c0	jens-daniel-mueller	2021-08-04

[[3]]

Past versions of budget_MLR_regions_fig-3.png

Version	Author	Date
cd8e0d5	jens-daniel-mueller	2021-08-06
15773a0	jens-daniel-mueller	2021-08-06
da61d1a	jens-daniel-mueller	2021-08-06
340d731	jens-daniel-mueller	2021-08-06
71546e4	jens-daniel-mueller	2021-08-06
29444a1	jens-daniel-mueller	2021-08-05
42e80c0	jens-daniel-mueller	2021-08-04

[[4]]

Past versions of budget_MLR_regions_fig-4.png

Version	Author	Date
cd8e0d5	jens-daniel-mueller	2021-08-06
15773a0	jens-daniel-mueller	2021-08-06
da61d1a	jens-daniel-mueller	2021-08-06
340d731	jens-daniel-mueller	2021-08-06
71546e4	jens-daniel-mueller	2021-08-06
29444a1	jens-daniel-mueller	2021-08-05
42e80c0	jens-daniel-mueller	2021-08-04

[[5]]

Past versions of budget_MLR_regions_fig-5.png

Version	Author	Date
cd8e0d5	jens-daniel-mueller	2021-08-06
15773a0	jens-daniel-mueller	2021-08-06
da61d1a	jens-daniel-mueller	2021-08-06
340d731	jens-daniel-mueller	2021-08-06
71546e4	jens-daniel-mueller	2021-08-06
29444a1	jens-daniel-mueller	2021-08-05
42e80c0	jens-daniel-mueller	2021-08-04

[[6]]

Past versions of budget_MLR_regions_fig-6.png

Version	Author	Date
cd8e0d5	jens-daniel-mueller	2021-08-06
15773a0	jens-daniel-mueller	2021-08-06
da61d1a	jens-daniel-mueller	2021-08-06
340d731	jens-daniel-mueller	2021-08-06
71546e4	jens-daniel-mueller	2021-08-06
29444a1	jens-daniel-mueller	2021-08-05
42e80c0	jens-daniel-mueller	2021-08-04

[[7]]

Past versions of budget_MLR_regions_fig-7.png

Version	Author	Date
cd8e0d5	jens-daniel-mueller	2021-08-06
15773a0	jens-daniel-mueller	2021-08-06
da61d1a	jens-daniel-mueller	2021-08-06

dcant_budget_lat_grid <- 
  dcant_inv %>% 
  m_grid_horizontal_coarse() %>%
  group_by(lat_grid, basin_AIP) %>% 
  nest() %>%
  mutate(budget = map(.x = data, ~ m_dcant_budget(.x))) %>%
  select(-data) %>%
  unnest(budget)

dcant_budget_lat_grid %>%
  filter(inv_depth == params_global$inventory_depth_standard,
         method %in% c("surface", "eMLR")) %>%
  group_by(basin_AIP) %>%
  group_split() %>%
  head(1) %>%
  map(
    ~ ggplot(data = .x,
             aes(lat_grid, value, fill = method)) +
      scale_fill_brewer(palette = "Dark2") +
      geom_col() +
      coord_flip() +
      facet_grid(estimate ~ data_source) +
      labs(title = paste("MLR_basins:", unique(.x$basin_AIP)))
  )

[[1]]

Past versions of budget_lat_grid_fig-1.png

Version	Author	Date
cd8e0d5	jens-daniel-mueller	2021-08-06
15773a0	jens-daniel-mueller	2021-08-06
da61d1a	jens-daniel-mueller	2021-08-06
340d731	jens-daniel-mueller	2021-08-06
71546e4	jens-daniel-mueller	2021-08-06
29444a1	jens-daniel-mueller	2021-08-05
42e80c0	jens-daniel-mueller	2021-08-04

5 Write csv

dcant_3d %>%
  write_csv(paste(path_version_data,
                  "dcant_3d.csv", sep = ""))

dcant_predictor_3d %>%
  write_csv(paste(path_version_data,
                  "dcant_predictor_3d.csv", sep = ""))

dcant_zonal %>%
  write_csv(paste(path_version_data,
                  "dcant_zonal.csv", sep = ""))

dcant_zonal_method %>%
  write_csv(paste(path_version_data,
                  "dcant_zonal_method.csv", sep = ""))

dcant_predictor_zonal %>%
  write_csv(paste(path_version_data,
                  "dcant_predictor_zonal.csv", sep = ""))

dcant_inv %>%
  filter(method == "total") %>% 
  select(-method) %>% 
  write_csv(paste(path_version_data,
                  "dcant_inv.csv", sep = ""))

dcant_inv %>%
  filter(method != "total") %>% 
  write_csv(paste(path_version_data,
                  "dcant_inv_method.csv", sep = ""))

dcant_budget_global %>%
  write_csv(paste(path_version_data,
                  "dcant_budget_global.csv", sep = ""))

dcant_budget_basin_AIP %>%
  write_csv(paste(path_version_data,
                  "dcant_budget_basin_AIP.csv", sep = ""))

dcant_budget_basin_MLR %>%
  write_csv(paste(path_version_data,
                  "dcant_budget_basin_MLR.csv", sep = ""))

dcant_budget_lat_grid %>%
  write_csv(paste(path_version_data,
                  "dcant_budget_lat_grid.csv", sep = ""))

Session information

sessionInfo()

R version 4.0.3 (2020-10-10)
Platform: x86_64-pc-linux-gnu (64-bit)
Running under: openSUSE Leap 15.2

Matrix products: default
BLAS:   /usr/local/R-4.0.3/lib64/R/lib/libRblas.so
LAPACK: /usr/local/R-4.0.3/lib64/R/lib/libRlapack.so

locale:
 [1] LC_CTYPE=en_US.UTF-8       LC_NUMERIC=C              
 [3] LC_TIME=en_US.UTF-8        LC_COLLATE=en_US.UTF-8    
 [5] LC_MONETARY=en_US.UTF-8    LC_MESSAGES=en_US.UTF-8   
 [7] LC_PAPER=en_US.UTF-8       LC_NAME=C                 
 [9] LC_ADDRESS=C               LC_TELEPHONE=C            
[11] LC_MEASUREMENT=en_US.UTF-8 LC_IDENTIFICATION=C       

attached base packages:
[1] stats     graphics  grDevices utils     datasets  methods   base     

other attached packages:
 [1] marelac_2.1.10  shape_1.4.5     seacarb_3.2.14  oce_1.2-0      
 [5] gsw_1.0-5       testthat_2.3.2  ggforce_0.3.3   metR_0.9.0     
 [9] scico_1.2.0     patchwork_1.1.1 collapse_1.5.0  forcats_0.5.0  
[13] stringr_1.4.0   dplyr_1.0.5     purrr_0.3.4     readr_1.4.0    
[17] tidyr_1.1.2     tibble_3.0.4    ggplot2_3.3.3   tidyverse_1.3.0
[21] workflowr_1.6.2

loaded via a namespace (and not attached):
 [1] fs_1.5.0                 lubridate_1.7.9          RColorBrewer_1.1-2      
 [4] httr_1.4.2               rprojroot_2.0.2          tools_4.0.3             
 [7] backports_1.1.10         R6_2.5.0                 DBI_1.1.0               
[10] colorspace_1.4-1         withr_2.3.0              tidyselect_1.1.0        
[13] compiler_4.0.3           git2r_0.27.1             cli_2.1.0               
[16] rvest_0.3.6              xml2_1.3.2               isoband_0.2.2           
[19] labeling_0.4.2           scales_1.1.1             checkmate_2.0.0         
[22] digest_0.6.27            rmarkdown_2.5            pkgconfig_2.0.3         
[25] htmltools_0.5.0          dbplyr_1.4.4             rlang_0.4.10            
[28] readxl_1.3.1             rstudioapi_0.11          farver_2.0.3            
[31] generics_0.0.2           jsonlite_1.7.1           magrittr_1.5            
[34] Matrix_1.2-18            Rcpp_1.0.5               munsell_0.5.0           
[37] fansi_0.4.1              lifecycle_1.0.0          stringi_1.5.3           
[40] whisker_0.4              yaml_2.2.1               MASS_7.3-53             
[43] grid_4.0.3               blob_1.2.1               parallel_4.0.3          
[46] promises_1.1.1           crayon_1.3.4             lattice_0.20-41         
[49] haven_2.3.1              hms_0.5.3                knitr_1.30              
[52] pillar_1.4.7             reprex_0.3.0             glue_1.4.2              
[55] evaluate_0.14            RcppArmadillo_0.10.1.2.0 data.table_1.13.2       
[58] modelr_0.1.8             vctrs_0.3.5              tweenr_1.0.2            
[61] httpuv_1.5.4             cellranger_1.1.0         gtable_0.3.0            
[64] polyclip_1.10-0          assertthat_0.2.1         xfun_0.18               
[67] broom_0.7.5              RcppEigen_0.3.3.7.0      later_1.1.0.1           
[70] viridisLite_0.3.0        ellipsis_0.3.1           here_0.1