Struct openssl::ssl::SslMode

[+] Show declaration

pub struct SslMode { /* fields omitted */ }

[−] Expand description

Options controlling the behavior of an SslContext.

Methods

impl SslMode[−]

pub const ENABLE_PARTIAL_WRITE: SslMode[−][−]

Enables "short writes".

Normally, a write in OpenSSL will always write out all of the requested data, even if it requires more than one TLS record or write to the underlying stream. This option will cause a write to return after writing a single TLS record instead.

pub const ACCEPT_MOVING_WRITE_BUFFER: SslMode[−][−]

Disables a check that the data buffer has not moved between calls when operating in a nonblocking context.

pub const AUTO_RETRY: SslMode[−][−]

Enables automatic retries after TLS session events such as renegotiations or heartbeats.

By default, OpenSSL will return a WantRead error after a renegotiation or heartbeat. This option will cause OpenSSL to automatically continue processing the requested operation instead.

Note that SslStream::read and SslStream::write will automatically retry regardless of the state of this option. It only affects SslStream::ssl_read and SslStream::ssl_write.

pub const NO_AUTO_CHAIN: SslMode[−][−]

Disables automatic chain building when verifying a peer's certificate.

TLS peers are responsible for sending the entire certificate chain from the leaf to a trusted root, but some will incorrectly not do so. OpenSSL will try to build the chain out of certificates it knows of, and this option will disable that behavior.

pub const RELEASE_BUFFERS: SslMode[−][−]

Release memory buffers when the session does not need them.

This saves ~34 KiB of memory for idle streams.

pub const SEND_FALLBACK_SCSV: SslMode[−][−]

Sends the fake TLS_FALLBACK_SCSV cipher suite in the ClientHello message of a handshake.

This should only be enabled if a client has failed to connect to a server which attempted to downgrade the protocol version of the session.

Do not use this unless you know what you're doing!

pub fn empty() -> SslMode[−]

Returns an empty set of flags.

pub fn all() -> SslMode[−]

Returns the set containing all flags.

pub fn bits(&self) -> c_long[−]

Returns the raw value of the flags currently stored.

pub fn from_bits(bits: c_long) -> Option<SslMode>[−]

Convert from underlying bit representation, unless that representation contains bits that do not correspond to a flag.

pub fn from_bits_truncate(bits: c_long) -> SslMode[−]

Convert from underlying bit representation, dropping any bits that do not correspond to flags.

pub fn is_empty(&self) -> bool[−]

Returns true if no flags are currently stored.

pub fn is_all(&self) -> bool[−]

Returns true if all flags are currently set.

pub fn intersects(&self, other: SslMode) -> bool[−]

Returns true if there are flags common to both self and other.

pub fn contains(&self, other: SslMode) -> bool[−]

Returns true all of the flags in other are contained within self.

pub fn insert(&mut self, other: SslMode)[−]

Inserts the specified flags in-place.

pub fn remove(&mut self, other: SslMode)[−]

Removes the specified flags in-place.

pub fn toggle(&mut self, other: SslMode)[−]

Toggles the specified flags in-place.

pub fn set(&mut self, other: SslMode, value: bool)[−]

Inserts or removes the specified flags depending on the passed value.

Trait Implementations

impl PartialEq<SslMode> for SslMode[+]

[+] Show hidden undocumented items

fn eq(&self, other: &SslMode) -> bool[−]

This method tests for self and other values to be equal, and is used by ==.

fn ne(&self, other: &SslMode) -> bool[−]

This method tests for !=.

impl Ord for SslMode[+]

[+] Show hidden undocumented items

fn cmp(&self, other: &SslMode) -> Ordering[−]

This method returns an Ordering between self and other.

fn max(self, other: Self) -> Self[−]

Compares and returns the maximum of two values.

fn min(self, other: Self) -> Self[−]

Compares and returns the minimum of two values.

impl Clone for SslMode[+]

[+] Show hidden undocumented items

fn clone(&self) -> SslMode[−]

Returns a copy of the value.

fn clone_from(&mut self, source: &Self)[−]

Performs copy-assignment from source.

impl Extend<SslMode> for SslMode[+]

[+] Show hidden undocumented items

fn extend<T: IntoIterator<Item = SslMode>>(&mut self, iterator: T)[−]

Extends a collection with the contents of an iterator.

impl Eq for SslMode

impl Copy for SslMode

impl PartialOrd<SslMode> for SslMode[+]

[+] Show hidden undocumented items

fn partial_cmp(&self, other: &SslMode) -> Option<Ordering>[−]

This method returns an ordering between self and other values if one exists.

fn lt(&self, other: &SslMode) -> bool[−]

This method tests less than (for self and other) and is used by the < operator.

fn le(&self, other: &SslMode) -> bool[−]

This method tests less than or equal to (for self and other) and is used by the <= operator.

fn gt(&self, other: &SslMode) -> bool[−]

This method tests greater than (for self and other) and is used by the > operator.

fn ge(&self, other: &SslMode) -> bool[−]

This method tests greater than or equal to (for self and other) and is used by the >= operator.

impl Binary for SslMode[+]

[+] Show hidden undocumented items

fn fmt(&self, f: &mut Formatter) -> Result[−]

Formats the value using the given formatter.

impl Debug for SslMode[+]

[+] Show hidden undocumented items

fn fmt(&self, f: &mut Formatter) -> Result[−]

Formats the value using the given formatter.

impl UpperHex for SslMode[+]

[+] Show hidden undocumented items

fn fmt(&self, f: &mut Formatter) -> Result[−]

Formats the value using the given formatter.

impl LowerHex for SslMode[+]

[+] Show hidden undocumented items

fn fmt(&self, f: &mut Formatter) -> Result[−]

Formats the value using the given formatter.

impl Octal for SslMode[+]

[+] Show hidden undocumented items

fn fmt(&self, f: &mut Formatter) -> Result[−]

Formats the value using the given formatter.

impl Hash for SslMode[+]

[+] Show hidden undocumented items

fn hash<__H: Hasher>(&self, state: &mut __H)[−]

Feeds this value into the given [Hasher].

fn hash_slice<H>(data: &[Self], state: &mut H) where
    H: Hasher, [−]

Feeds a slice of this type into the given [Hasher].

impl Sub<SslMode> for SslMode[+]

type Output = SslMode

The resulting type after applying the - operator.

fn sub(self, other: SslMode) -> SslMode[−]

Returns the set difference of the two sets of flags.

impl SubAssign<SslMode> for SslMode[+]

fn sub_assign(&mut self, other: SslMode)[−]

Disables all flags enabled in the set.

impl Not for SslMode[+]

type Output = SslMode

The resulting type after applying the ! operator.

fn not(self) -> SslMode[−]

Returns the complement of this set of flags.

impl BitAnd<SslMode> for SslMode[+]

type Output = SslMode

The resulting type after applying the & operator.

fn bitand(self, other: SslMode) -> SslMode[−]

Returns the intersection between the two sets of flags.

impl BitOr<SslMode> for SslMode[+]

type Output = SslMode

The resulting type after applying the | operator.

fn bitor(self, other: SslMode) -> SslMode[−]

Returns the union of the two sets of flags.

impl BitXor<SslMode> for SslMode[+]

type Output = SslMode

The resulting type after applying the ^ operator.

fn bitxor(self, other: SslMode) -> SslMode[−]

Returns the left flags, but with all the right flags toggled.

impl BitAndAssign<SslMode> for SslMode[+]

fn bitand_assign(&mut self, other: SslMode)[−]

Disables all flags disabled in the set.

impl BitOrAssign<SslMode> for SslMode[+]

fn bitor_assign(&mut self, other: SslMode)[−]

Adds the set of flags.

impl BitXorAssign<SslMode> for SslMode[+]

fn bitxor_assign(&mut self, other: SslMode)[−]

Toggles the set of flags.

impl FromIterator<SslMode> for SslMode[+]

[+] Show hidden undocumented items

fn from_iter<T: IntoIterator<Item = SslMode>>(iterator: T) -> SslMode[−]

Creates a value from an iterator.