[−][src]Enum registry_pol::v1::RegistryValueType
The data type field can contain any of the registry value types defined in WinNT.h.
Variants
REG_NONEREG_SZREG_EXPAND_SZREG_BINARYREG_DWORDREG_DWORD_BIG_ENDIANREG_LINKREG_MULTI_SZREG_QWORDMethods
impl RegistryValueType[src]
impl RegistryValueTypepub const REG_DWORD_LITTLE_ENDIAN: RegistryValueType[src]
Same as REG_DWORD.
pub const REG_QWORD_LITTLE_ENDIAN: RegistryValueType[src]
pub fn parse(tp: u32) -> Option<RegistryValueType>[src]
pub fn parse(tp: u32) -> Option<RegistryValueType>Get a RegistryValueType from an integer representation, or None.
Examples
assert_eq!(RegistryValueType::parse(RegistryValueType::REG_DWORD as u32), Some(RegistryValueType::REG_DWORD)); assert_eq!(RegistryValueType::parse(420), None);
Trait Implementations
impl Clone for RegistryValueType[src]
impl Clone for RegistryValueTypefn clone(&self) -> RegistryValueType[src]
fn clone(&self) -> RegistryValueTypeReturns a copy of the value. Read more
fn clone_from(&mut self, source: &Self)1.0.0[src]
fn clone_from(&mut self, source: &Self)Performs copy-assignment from source. Read more
impl Copy for RegistryValueType[src]
impl Copy for RegistryValueTypeimpl Eq for RegistryValueType[src]
impl Eq for RegistryValueTypeimpl PartialOrd<RegistryValueType> for RegistryValueType[src]
impl PartialOrd<RegistryValueType> for RegistryValueTypefn partial_cmp(&self, other: &RegistryValueType) -> Option<Ordering>[src]
fn partial_cmp(&self, other: &RegistryValueType) -> Option<Ordering>This method returns an ordering between self and other values if one exists. Read more
#[must_use]
fn lt(&self, other: &Rhs) -> bool1.0.0[src]
#[must_use]
fn lt(&self, other: &Rhs) -> boolThis method tests less than (for self and other) and is used by the < operator. Read more
#[must_use]
fn le(&self, other: &Rhs) -> bool1.0.0[src]
#[must_use]
fn le(&self, other: &Rhs) -> boolThis method tests less than or equal to (for self and other) and is used by the <= operator. Read more
#[must_use]
fn gt(&self, other: &Rhs) -> bool1.0.0[src]
#[must_use]
fn gt(&self, other: &Rhs) -> boolThis method tests greater than (for self and other) and is used by the > operator. Read more
#[must_use]
fn ge(&self, other: &Rhs) -> bool1.0.0[src]
#[must_use]
fn ge(&self, other: &Rhs) -> boolThis method tests greater than or equal to (for self and other) and is used by the >= operator. Read more
impl PartialEq<RegistryValueType> for RegistryValueType[src]
impl PartialEq<RegistryValueType> for RegistryValueTypefn eq(&self, other: &RegistryValueType) -> bool[src]
fn eq(&self, other: &RegistryValueType) -> boolThis method tests for self and other values to be equal, and is used by ==. Read more
#[must_use]
fn ne(&self, other: &Rhs) -> bool1.0.0[src]
#[must_use]
fn ne(&self, other: &Rhs) -> boolThis method tests for !=.
impl Ord for RegistryValueType[src]
impl Ord for RegistryValueTypefn cmp(&self, other: &RegistryValueType) -> Ordering[src]
fn cmp(&self, other: &RegistryValueType) -> OrderingThis method returns an Ordering between self and other. Read more
fn max(self, other: Self) -> Self1.21.0[src]
fn max(self, other: Self) -> SelfCompares and returns the maximum of two values. Read more
fn min(self, other: Self) -> Self1.21.0[src]
fn min(self, other: Self) -> SelfCompares and returns the minimum of two values. Read more
impl Hash for RegistryValueType[src]
impl Hash for RegistryValueTypefn hash<__H: Hasher>(&self, state: &mut __H)[src]
fn hash<__H: Hasher>(&self, state: &mut __H)Feeds this value into the given [Hasher]. Read more
fn hash_slice<H>(data: &[Self], state: &mut H) where
H: Hasher, 1.3.0[src]
fn hash_slice<H>(data: &[Self], state: &mut H) where
H: Hasher, Feeds a slice of this type into the given [Hasher]. Read more
impl Debug for RegistryValueType[src]
impl Debug for RegistryValueTypeAuto Trait Implementations
impl Send for RegistryValueType
impl Send for RegistryValueTypeimpl Sync for RegistryValueType
impl Sync for RegistryValueTypeBlanket Implementations
impl<T> From for T[src]
impl<T> From for Timpl<T, U> Into for T where
U: From<T>, [src]
impl<T, U> Into for T where
U: From<T>, impl<T> ToOwned for T where
T: Clone, [src]
impl<T> ToOwned for T where
T: Clone, type Owned = T
fn to_owned(&self) -> T[src]
fn to_owned(&self) -> TCreates owned data from borrowed data, usually by cloning. Read more
fn clone_into(&self, target: &mut T)[src]
fn clone_into(&self, target: &mut T)🔬 This is a nightly-only experimental API. (toowned_clone_into)
recently added
Uses borrowed data to replace owned data, usually by cloning. Read more
impl<T, U> TryFrom for T where
T: From<U>, [src]
impl<T, U> TryFrom for T where
T: From<U>, type Error = !
try_from)The type returned in the event of a conversion error.
fn try_from(value: U) -> Result<T, <T as TryFrom<U>>::Error>[src]
fn try_from(value: U) -> Result<T, <T as TryFrom<U>>::Error>try_from)Performs the conversion.
impl<T> Borrow for T where
T: ?Sized, [src]
impl<T> Borrow for T where
T: ?Sized, impl<T> BorrowMut for T where
T: ?Sized, [src]
impl<T> BorrowMut for T where
T: ?Sized, fn borrow_mut(&mut self) -> &mut T[src]
fn borrow_mut(&mut self) -> &mut TMutably borrows from an owned value. Read more
impl<T, U> TryInto for T where
U: TryFrom<T>, [src]
impl<T, U> TryInto for T where
U: TryFrom<T>, type Error = <U as TryFrom<T>>::Error
try_from)The type returned in the event of a conversion error.
fn try_into(self) -> Result<U, <U as TryFrom<T>>::Error>[src]
fn try_into(self) -> Result<U, <U as TryFrom<T>>::Error>try_from)Performs the conversion.
impl<T> Any for T where
T: 'static + ?Sized, [src]
impl<T> Any for T where
T: 'static + ?Sized, fn get_type_id(&self) -> TypeId[src]
fn get_type_id(&self) -> TypeId🔬 This is a nightly-only experimental API. (get_type_id)
this method will likely be replaced by an associated static
Gets the TypeId of self. Read more