Struct mio_uds::UnixStream

pub struct UnixStream { /* fields omitted */ }

A Unix stream socket.

This type represents a SOCK_STREAM connection of the AF_UNIX family, otherwise known as Unix domain sockets or Unix sockets. This stream is readable/writable and acts similarly to a TCP stream where reads/writes are all in order with respect to the other connected end.

Streams can either be connected to paths locally or another ephemeral socket created by the pair function.

A UnixStream implements the Read, Write, Evented, AsRawFd, IntoRawFd, and FromRawFd traits for interoperating with other I/O code.

Note that all values of this type are typically in nonblocking mode, so the read and write methods may return an error with the kind of WouldBlock, indicating that it's not ready to read/write just yet.

Methods

impl UnixStream

pub fn connect<P: AsRef<Path>>(p: P) -> Result<UnixStream>

Connects to the socket named by path.

The socket returned may not be readable and/or writable yet, as the connection may be in progress. The socket should be registered with an event loop to wait on both of these properties being available.

pub fn from_stream(stream: UnixStream) -> Result<UnixStream>

Consumes a standard library UnixStream and returns a wrapped UnixStream compatible with mio.

The returned stream is moved into nonblocking mode and is otherwise ready to get associated with an event loop.

pub fn pair() -> Result<(UnixStream, UnixStream)>

Creates an unnamed pair of connected sockets.

Returns two UnixStreams which are connected to each other.

pub fn try_clone(&self) -> Result<UnixStream>

Creates a new independently owned handle to the underlying socket.

The returned UnixStream is a reference to the same stream that this object references. Both handles will read and write the same stream of data, and options set on one stream will be propogated to the other stream.

pub fn local_addr(&self) -> Result<SocketAddr>

Returns the socket address of the local half of this connection.

pub fn peer_addr(&self) -> Result<SocketAddr>

Returns the socket address of the remote half of this connection.

pub fn take_error(&self) -> Result<Option<Error>>

Returns the value of the SO_ERROR option.

pub fn shutdown(&self, how: Shutdown) -> Result<()>

Shuts down the read, write, or both halves of this connection.

This function will cause all pending and future I/O calls on the specified portions to immediately return with an appropriate value (see the documentation of Shutdown).

pub fn read_bufs(&self, bufs: &mut [&mut IoVec]) -> Result<usize>

Read in a list of buffers all at once.

This operation will attempt to read bytes from this socket and place them into the list of buffers provided. Note that each buffer is an IoVec which can be created from a byte slice.

The buffers provided will be filled in sequentially. A buffer will be entirely filled up before the next is written to.

The number of bytes read is returned, if successful, or an error is returned otherwise. If no bytes are available to be read yet then a "would block" error is returned. This operation does not block.

pub fn write_bufs(&self, bufs: &[&IoVec]) -> Result<usize>

Write a list of buffers all at once.

This operation will attempt to write a list of byte buffers to this socket. Note that each buffer is an IoVec which can be created from a byte slice.

The buffers provided will be written sequentially. A buffer will be entirely written before the next is written.

The number of bytes written is returned, if successful, or an error is returned otherwise. If the socket is not currently writable then a "would block" error is returned. This operation does not block.

Trait Implementations

impl AsRawFd for UnixStream

fn as_raw_fd(&self) -> i32

Extracts the raw file descriptor.

impl Debug for UnixStream

fn fmt(&self, f: &mut Formatter) -> Result

Formats the value using the given formatter.

impl Evented for UnixStream

fn register(
    &self,
    poll: &Poll,
    token: Token,
    events: Ready,
    opts: PollOpt
) -> Result<()>

Register self with the given Poll instance.

fn reregister(
    &self,
    poll: &Poll,
    token: Token,
    events: Ready,
    opts: PollOpt
) -> Result<()>

Re-register self with the given Poll instance.

fn deregister(&self, poll: &Poll) -> Result<()>

Deregister self from the given Poll instance

impl FromRawFd for UnixStream

unsafe fn from_raw_fd(fd: i32) -> UnixStream

Constructs a new instance of Self from the given raw file descriptor.

impl IntoRawFd for UnixStream

fn into_raw_fd(self) -> i32

Consumes this object, returning the raw underlying file descriptor.

impl Read for UnixStream

fn read(&mut self, bytes: &mut [u8]) -> Result<usize>

Pull some bytes from this source into the specified buffer, returning how many bytes were read.

fn read_vectored(&mut self, bufs: &mut [IoSliceMut]) -> Result<usize, Error>

Like read, except that it reads into a slice of buffers.

unsafe fn initializer(&self) -> Initializer

🔬 This is a nightly-only experimental API. (read_initializer)

Determines if this Reader can work with buffers of uninitialized memory.

fn read_to_end(&mut self, buf: &mut Vec<u8>) -> Result<usize, Error>

Read all bytes until EOF in this source, placing them into buf.

fn read_to_string(&mut self, buf: &mut String) -> Result<usize, Error>

Read all bytes until EOF in this source, appending them to buf.

fn read_exact(&mut self, buf: &mut [u8]) -> Result<(), Error>

Read the exact number of bytes required to fill buf.

fn by_ref(&mut self) -> &mut Self

Creates a "by reference" adaptor for this instance of Read.

fn bytes(self) -> Bytes<Self>

Transforms this Read instance to an [Iterator] over its bytes.

fn chain<R>(self, next: R) -> Chain<Self, R> where
    R: Read, 

Creates an adaptor which will chain this stream with another.

fn take(self, limit: u64) -> Take<Self>

Creates an adaptor which will read at most limit bytes from it.

impl<'a> Read for &'a UnixStream

fn read(&mut self, bytes: &mut [u8]) -> Result<usize>

Pull some bytes from this source into the specified buffer, returning how many bytes were read.

fn read_vectored(&mut self, bufs: &mut [IoSliceMut]) -> Result<usize, Error>

Like read, except that it reads into a slice of buffers.

unsafe fn initializer(&self) -> Initializer

🔬 This is a nightly-only experimental API. (read_initializer)

Determines if this Reader can work with buffers of uninitialized memory.

fn read_to_end(&mut self, buf: &mut Vec<u8>) -> Result<usize, Error>

Read all bytes until EOF in this source, placing them into buf.

fn read_to_string(&mut self, buf: &mut String) -> Result<usize, Error>

Read all bytes until EOF in this source, appending them to buf.

fn read_exact(&mut self, buf: &mut [u8]) -> Result<(), Error>

Read the exact number of bytes required to fill buf.

fn by_ref(&mut self) -> &mut Self

Creates a "by reference" adaptor for this instance of Read.

fn bytes(self) -> Bytes<Self>

Transforms this Read instance to an [Iterator] over its bytes.

fn chain<R>(self, next: R) -> Chain<Self, R> where
    R: Read, 

Creates an adaptor which will chain this stream with another.

fn take(self, limit: u64) -> Take<Self>

Creates an adaptor which will read at most limit bytes from it.

impl Write for UnixStream

fn write(&mut self, bytes: &[u8]) -> Result<usize>

Write a buffer into this writer, returning how many bytes were written.

fn flush(&mut self) -> Result<()>

Flush this output stream, ensuring that all intermediately buffered contents reach their destination.

fn write_vectored(&mut self, bufs: &[IoSlice]) -> Result<usize, Error>

Like write, except that it writes from a slice of buffers.

fn write_all(&mut self, buf: &[u8]) -> Result<(), Error>

Attempts to write an entire buffer into this writer.

fn write_fmt(&mut self, fmt: Arguments) -> Result<(), Error>

Writes a formatted string into this writer, returning any error encountered.

fn by_ref(&mut self) -> &mut Self

Creates a "by reference" adaptor for this instance of Write.

impl<'a> Write for &'a UnixStream

fn write(&mut self, bytes: &[u8]) -> Result<usize>

Write a buffer into this writer, returning how many bytes were written.

fn flush(&mut self) -> Result<()>

Flush this output stream, ensuring that all intermediately buffered contents reach their destination.

fn write_vectored(&mut self, bufs: &[IoSlice]) -> Result<usize, Error>

Like write, except that it writes from a slice of buffers.

fn write_all(&mut self, buf: &[u8]) -> Result<(), Error>

Attempts to write an entire buffer into this writer.

fn write_fmt(&mut self, fmt: Arguments) -> Result<(), Error>

Writes a formatted string into this writer, returning any error encountered.

fn by_ref(&mut self) -> &mut Self

Creates a "by reference" adaptor for this instance of Write.