Last updated: 2023-08-24

Checks: 7 0

Knit directory: WP1/

This reproducible R Markdown analysis was created with workflowr (version 1.7.0). The Checks tab describes the reproducibility checks that were applied when the results were created. The Past versions tab lists the development history.

R Markdown file: up-to-date

Great! Since the R Markdown file has been committed to the Git repository, you know the exact version of the code that produced these results.

Environment: empty

Great job! The global environment was empty. Objects defined in the global environment can affect the analysis in your R Markdown file in unknown ways. For reproduciblity it’s best to always run the code in an empty environment.

Seed: set.seed(20210216)

The command set.seed(20210216) was run prior to running the code in the R Markdown file. Setting a seed ensures that any results that rely on randomness, e.g. subsampling or permutations, are reproducible.

Session information: recorded

Great job! Recording the operating system, R version, and package versions is critical for reproducibility.

Cache: none

Nice! There were no cached chunks for this analysis, so you can be confident that you successfully produced the results during this run.

File paths: relative

Great job! Using relative paths to the files within your workflowr project makes it easier to run your code on other machines.

Repository version: 9ad9abd

Great! You are using Git for version control. Tracking code development and connecting the code version to the results is critical for reproducibility.

The results in this page were generated with repository version 9ad9abd. See the Past versions tab to see a history of the changes made to the R Markdown and HTML files.

Note that you need to be careful to ensure that all relevant files for the analysis have been committed to Git prior to generating the results (you can use wflow_publish or wflow_git_commit). workflowr only checks the R Markdown file, but you know if there are other scripts or data files that it depends on. Below is the status of the Git repository when the results were generated: 


Ignored files:
    Ignored:    .Rhistory
    Ignored:    .Rproj.user/
    Ignored:    .httr-oauth
    Ignored:    data/analyses/clean_all.RData
    Ignored:    data/analyses/clean_all_clean.RData
    Ignored:    data/analyses/ice_4km_proc.RData
    Ignored:    data/full_data/
    Ignored:    data/sst_trom.RData
    Ignored:    metadata/globalfishingwatch_API_key.RData
    Ignored:    metadata/is_gfw_database.RData
    Ignored:    metadata/pangaea_parameters.tab
    Ignored:    metadata/pg_EU_ref_meta.csv
    Ignored:    mhw-definition_1_orig.xcf
    Ignored:    poster/SSC_2021_landscape_files/paged-0.15/
    Ignored:    presentations/.Rhistory
    Ignored:    presentations/2023_Ilico.html
    Ignored:    presentations/2023_results_day.html
    Ignored:    presentations/2023_seminar.html
    Ignored:    presentations/2023_summary.html
    Ignored:    presentations/ASSW_2023.html
    Ignored:    presentations/ASSW_side_2023.html
    Ignored:    shiny/dataAccess/coastline_hi_sub.csv
    Ignored:    shiny/kongCTD/.httr-oauth
    Ignored:    shiny/kongCTD/data/data_base.Rds
    Ignored:    shiny/test_data/

Unstaged changes:
    Modified:   .gitignore

Note that any generated files, e.g. HTML, png, CSS, etc., are not included in this status report because it is ok for generated content to have uncommitted changes.

These are the previous versions of the repository in which changes were made to the R Markdown (analysis/model_summary.Rmd) and HTML (docs/model_summary.html) files. If you’ve configured a remote Git repository (see ?wflow_git_remote), click on the hyperlinks in the table below to view the files as they were in that past version.

File Version Author Date Message
html bd4819b Robert 2023-08-23 Build site.
html 4ddbb12 robwschlegel 2023-07-24 Build site.
html e8997de Robert 2023-05-30 Build site.
html 2ea419c Robert 2023-05-30 Build site.
html f59b5f2 robwschlegel 2022-11-28 Re-published site
html cc87bdd Robert 2022-09-23 Build site.
html 8a8fd0b Robert 2022-05-27 Build site.
html b32f47e robwschlegel 2022-04-21 Build site.
html 1d3a3b3 Robert 2021-12-17 Build site.
html 67e4676 Robert 2021-12-17 Build site.
html ff5a97b Robert 2021-12-17 Updated model temperature summaries with new model data
html 0d6d433 Robert 2021-12-15 Build site.
html cf10066 robwschlegel 2021-12-15 Build site.
html 5ba8046 Robert 2021-12-15 Build site.
html 57f4772 Robert 2021-12-15 Build site.
Rmd 713428c Robert 2021-12-15 Calculated SST trends for all model data
html 713428c Robert 2021-12-15 Calculated SST trends for all model data
html 1da6285 Robert 2021-12-14 Build site.
html 860f5d3 Robert 2021-12-10 Build site.
html 2725466 Robert 2021-12-10 Merge
html 64a5252 Robert 2021-12-10 Build site.
html 807675e robwschlegel 2021-12-06 Build site.
html 104acbc Robert 2021-12-03 Build site.
html 26ce5f6 robwschlegel 2021-12-01 Build site.
html 1e379a2 robwschlegel 2021-11-25 Build site.
html 79b2932 Robert 2021-11-10 Build site.
html 7caf87b Robert 2021-11-09 Build site.
Rmd ccc068e Robert 2021-11-09 Data analysis and model analysis now performed in a script and figures are saved for more rapid access
html ccc068e Robert 2021-11-09 Data analysis and model analysis now performed in a script and figures are saved for more rapid access
html 17f3bb3 Robert 2021-09-21 Build site.
html 68c63b2 Robert 2021-09-21 Build site.
html d42750a Robert 2021-09-21 Re-run
html cfca89c Robert 2021-09-21 Build site.
html d9c1810 Robert 2021-09-21 Build site.
html 051008a Robert 2021-09-21 Build site.
html 9106137 Robert 2021-09-21 Build site.
html 2f621ee Robert 2021-09-21 Build site.
Rmd b966f85 Robert 2021-09-21 First pass at model summary page
html b966f85 Robert 2021-09-21 First pass at model summary page

Overview

This document contains a summary of the model data made available by Morten Skogen of the FACE-IT project.

Svalbard

Kongsfjorden

Model temperatures. There are many more variables available within the models.

Figure 1: A) Average model temperatures at depths for different RCP projections. Note that the model data are not on a cartesian coordinate grid so the data are shown here as points instead of as a raster. B) Trends in model temperatures at different depths and RCP projections. Straight lines show linear models fitted to each point in panel A.
Figure 1: A) Average model temperatures at depths for different RCP projections. Note that the model data are not on a cartesian coordinate grid so the data are shown here as points instead of as a raster. B) Trends in model temperatures at different depths and RCP projections. Straight lines show linear models fitted to each point in panel A.

Isfjorden

Figure 2: A) Average model temperatures at depths for different RCP projections. Note that the model data are not on a cartesian coordinate grid so the data are shown here as points instead of as a raster. B) Trends in model temperatures at different depths and RCP projections. Straight lines show linear models fitted to each point in panel A.
Figure 2: A) Average model temperatures at depths for different RCP projections. Note that the model data are not on a cartesian coordinate grid so the data are shown here as points instead of as a raster. B) Trends in model temperatures at different depths and RCP projections. Straight lines show linear models fitted to each point in panel A.

Storfjorden

Figure 3: A) Average model temperatures at depths for different RCP projections. Note that the model data are not on a cartesian coordinate grid so the data are shown here as points instead of as a raster. B) Trends in model temperatures at different depths and RCP projections. Straight lines show linear models fitted to each point in panel A.
Figure 3: A) Average model temperatures at depths for different RCP projections. Note that the model data are not on a cartesian coordinate grid so the data are shown here as points instead of as a raster. B) Trends in model temperatures at different depths and RCP projections. Straight lines show linear models fitted to each point in panel A.

Greenland

Young Sound

Figure 4: A) Average model temperatures at depths for different RCP projections. Note that the model data are not on a cartesian coordinate grid so the data are shown here as points instead of as a raster. B) Trends in model temperatures at different depths and RCP projections. Straight lines show linear models fitted to each point in panel A.
Figure 4: A) Average model temperatures at depths for different RCP projections. Note that the model data are not on a cartesian coordinate grid so the data are shown here as points instead of as a raster. B) Trends in model temperatures at different depths and RCP projections. Straight lines show linear models fitted to each point in panel A.

Disko Bay

There are no model data for the western side of Greenland.

Nuup Kangerlua

There are no model data for the western side of Greenland.

Norway

Porsangerfjorden

Figure 5: A) Average model temperatures at depths for different RCP projections. Note that the model data are not on a cartesian coordinate grid so the data are shown here as points instead of as a raster. B) Trends in model temperatures at different depths and RCP projections. Straight lines show linear models fitted to each point in panel A.
Figure 5: A) Average model temperatures at depths for different RCP projections. Note that the model data are not on a cartesian coordinate grid so the data are shown here as points instead of as a raster. B) Trends in model temperatures at different depths and RCP projections. Straight lines show linear models fitted to each point in panel A.

Tromso

Figure 6: A) Average model temperatures at depths for different RCP projections. Note that the model data are not on a cartesian coordinate grid so the data are shown here as points instead of as a raster. B) Trends in model temperatures at different depths and RCP projections. Straight lines show linear models fitted to each point in panel A.
Figure 6: A) Average model temperatures at depths for different RCP projections. Note that the model data are not on a cartesian coordinate grid so the data are shown here as points instead of as a raster. B) Trends in model temperatures at different depths and RCP projections. Straight lines show linear models fitted to each point in panel A.

R version 4.3.1 (2023-06-16)
Platform: x86_64-pc-linux-gnu (64-bit)
Running under: Ubuntu 20.04.6 LTS

Matrix products: default
BLAS:   /usr/lib/x86_64-linux-gnu/blas/libblas.so.3.9.0 
LAPACK: /usr/lib/x86_64-linux-gnu/lapack/liblapack.so.3.9.0

locale:
 [1] LC_CTYPE=en_GB.UTF-8       LC_NUMERIC=C              
 [3] LC_TIME=en_GB.UTF-8        LC_COLLATE=en_GB.UTF-8    
 [5] LC_MONETARY=en_GB.UTF-8    LC_MESSAGES=en_GB.UTF-8   
 [7] LC_PAPER=en_GB.UTF-8       LC_NAME=C                 
 [9] LC_ADDRESS=C               LC_TELEPHONE=C            
[11] LC_MEASUREMENT=en_GB.UTF-8 LC_IDENTIFICATION=C       

time zone: Europe/Paris
tzcode source: system (glibc)

attached base packages:
[1] stats     graphics  grDevices utils     datasets  methods   base     

other attached packages:
[1] workflowr_1.7.0

loaded via a namespace (and not attached):
 [1] vctrs_0.6.3       httr_1.4.6        cli_3.6.1         knitr_1.43       
 [5] rlang_1.1.1       xfun_0.39         stringi_1.7.12    processx_3.8.2   
 [9] promises_1.2.0.1  jsonlite_1.8.7    glue_1.6.2        rprojroot_2.0.3  
[13] git2r_0.32.0      htmltools_0.5.5   httpuv_1.6.11     ps_1.7.5         
[17] sass_0.4.7        fansi_1.0.4       rmarkdown_2.23    jquerylib_0.1.4  
[21] tibble_3.2.1      evaluate_0.21     fastmap_1.1.1     yaml_2.3.7       
[25] lifecycle_1.0.3   whisker_0.4.1     stringr_1.5.0     compiler_4.3.1   
[29] fs_1.6.2          pkgconfig_2.0.3   Rcpp_1.0.11       rstudioapi_0.15.0
[33] later_1.3.1       digest_0.6.33     R6_2.5.1          utf8_1.2.3       
[37] pillar_1.9.0      callr_3.7.3       magrittr_2.0.3    bslib_0.5.0      
[41] tools_4.3.1       cachem_1.0.8      getPass_0.2-2