Last updated: 2018-11-10

workflowr checks: (Click a bullet for more information)
  • R Markdown file: uncommitted changes The R Markdown is ignored by Git. To know which version of the R Markdown file created these results, you’ll want to first commit it to the Git repo. If you’re still working on the analysis, you can ignore this warning. When you’re finished, you can run wflow_publish to commit the R Markdown file and build the HTML.

  • Environment: empty

    Great job! The global environment was empty. Objects defined in the global environment can affect the analysis in your R Markdown file in unknown ways. For reproduciblity it’s best to always run the code in an empty environment.

  • Seed: set.seed(20181015)

    The command set.seed(20181015) was run prior to running the code in the R Markdown file. Setting a seed ensures that any results that rely on randomness, e.g. subsampling or permutations, are reproducible.

  • Session information: recorded

    Great job! Recording the operating system, R version, and package versions is critical for reproducibility.

  • Repository version: 41b8aa2

    Great! You are using Git for version control. Tracking code development and connecting the code version to the results is critical for reproducibility. The version displayed above was the version of the Git repository at the time these results were generated.

    Note that you need to be careful to ensure that all relevant files for the analysis have been committed to Git prior to generating the results (you can use wflow_publish or wflow_git_commit). workflowr only checks the R Markdown file, but you know if there are other scripts or data files that it depends on. Below is the status of the Git repository when the results were generated:
    
    Ignored files:
        Ignored:    .DS_Store
        Ignored:    .Rhistory
        Ignored:    .Rproj.user/
        Ignored:    analysis/.DS_Store
        Ignored:    analysis/data/
        Ignored:    analysis/package.Rmd
        Ignored:    assets/
        Ignored:    docs/.DS_Store
    
    Untracked files:
        Untracked:  docs/assets/Boettiger-2018-Ecology_Letters.pdf
        Untracked:  docs/assets/Packaging-Data-Analytical Work-Reproducibly-Using-R-and-Friends.pdf
        Untracked:  docs/css/
        Untracked:  libs/
    
    
    Note that any generated files, e.g. HTML, png, CSS, etc., are not included in this status report because it is ok for generated content to have uncommitted changes.
Expand here to see past versions:
    File Version Author Date Message
    html 97818bf annakrystalli 2018-11-10 Build site.
    html 2c1e957 annakrystalli 2018-10-31 Build site.
    html c26c936 annakrystalli 2018-10-31 Build site.
    html 52adf4f annakrystalli 2018-10-30 Build site.
    html 921a7f8 annakrystalli 2018-10-30 commit docs

rrtools research compendium structure is based on R packages.

The R package structure can help with providing a logical organisation of files, by providing a set of standard locations for certain types of files.

To work with packages in RStudio we use the Build pane, which includes a variety of tools for building, documenting and testing packages. This will appear if Rstudio recognises the project as an R package.

Setup data


Copy data to data/

To begin, let’s copy gillespie.csv from the course materials you downloaded in rrtools-wkshp-materials-master/ to the subfolder analysis/data/raw_data/ in rrcompendium

Your data folder should now look like this:

analysis/data
├── DO-NOT-EDIT-ANY-FILES-IN-HERE-BY-HAND
├── derived_data
└── raw_data
    └── gillespie.csv

Inspect analysis.R file

Let’s also open analysis.R in the course materials and run the code. The script has some initial setup, then loads the data, recodes one of the columns for plotting and then plots the results of the simulation, which generates figure 1 in paper.pdf.

Create a package function


create .R function script

First we need an .R file to write our function in.

To create or edit .R files in the R/ directory, we can use:

● Modify 'R/process-data.R'

This creates a file called process-data.R in the R/ directory and opens it up for editing.


write function

In this file, let’s now create the function to recode system_size.

In particular, we can modify the following code from analysis.R

into a function like so:

This takes a dataframe of the data as input and outputs a dataframe with the values of system_size recoded for plotting.

Now, to have our function exported as part of the rrcompendium package, we need to document it using Roxygen2.



Document function

Documentation is one of the most important aspects of good code. Roxygen2 provides a documetation framework in R.


Roxygen2 documentation

Roxygen2 allows us to write specially-structured comments preceding each function definition. These are processed automatically to produce .Rd help files for our functions and control which are exported to the package NAMESPACE.

See the Generating Rd files roxygen2 vignette or Karl Broman’s blogpost on writing Roxygen2 documentation for further details.


Insert Roxygen skeleton

In Rstudio, you can insert a roxygen skeleton by placing the cursor anywhere in the definition of a function, then clicking:

Code > Insert Roxygen Skeleton

Applying this to our function results in this Roxygen skeleton:


Complete Roxygen documentation

Roxygen comments start with #' so we can continue to use regular comments for other purposes.

Title and description

The first line corresponds to the title for the function.

The title is followed by a blank #' line and then a longer description briefly describing what the function does. The description must be a single paragraph.

So for our function we could write something like this:

#' Recode system time variable
#'
#' Recode system time variable in dataframe containing data from file
#' `gillespie.csv`

Further function details are documented in Roxygen using tags like @tag.

function parameters (arguments)

@param tags names are automatically extracted from the function for each function argument and provide a way to document argument descriptions. We can document our single argument by editing the skeleton like so:

#' @param data dataframe containing data from file
#' `gillespie.csv`

function output

We use tag @return to describe what the function returns. In our case, we can edit with:

#' @return `data` with variable `system_size` recoded for plotting

export function

@export tells Roxygen2 to add this function as an export in the NAMESPACE file, so that it will be accessible available for use after package installation.

The Roxygen skeleton includes the @export tag by default. You can remove it for internal functions that will only be available within the NAMESPACE. You can access internal functions of a package using <package_name>:::

Provide examples

The @examples tag provides executable R code showing how to use the function in practice. This is a very important part of the documentation because many people look at the examples before reading anything else.

We’ll skip this for now but come back to it a bit later. Just remove the tag for now.


The completed function documentation should look something like this:



Build and install package


Build Roxygen documentation

Now that we’ve annotated our source code we can build the documentation either by clicking on More > Document in the RStudio Build panel or from the console using:

This is a wrapper for the roxygenize() function from the roxygen2 package. This builds the .Rd help files and populates the NAMESPACE


The man/ directory will now contain an .Rd file for recode_system_size.

man
└── recode_system_size.Rd

and the NAMESPACE now contains an export() entry for recode_system_size:

# Generated by roxygen2: do not edit by hand

export(recode_system_size)


Install package

The usual workflow for package development is to:

  • make some changes
  • build and install the package
  • unload and reload the package (often in a new R session)

The best way to install and reload a package in a fresh R session is to use the 🔨 Install and Restart cammand tab in the Build panel which performs several steps in sequence to ensure a clean and correct result:

  • Unloads any existing version of the package (including shared libraries if necessary).

  • Builds and installs the package using R CMD INSTALL.

  • Restarts the underlying R session to ensure a clean environment for re-loading the package.

  • Reloads the package in the new R session by executing the library function.

Running the 🔨 Install and Restart command on our package results in this output in the Build panel output:

Installing rrcompendium
'/Library/Frameworks/R.framework/Resources/bin/R'  \
  --no-site-file --no-environ --no-save --no-restore --quiet  \
  CMD INSTALL '/Users/Anna/Documents/workflows/rrcompendium'  \
  --library='/Library/Frameworks/R.framework/Versions/3.4/Resources/library'  \
  --install-tests 

* installing *source* package ‘rrcompendium’ ...
** R
** byte-compile and prepare package for lazy loading
** help
*** installing help indices
** building package indices
** testing if installed package can be loaded
* DONE (rrcompendium)
Reloading installed rrcompendium

And

Restarting R session...

in the console.

We can inspect the resulting documentation for our function using ?recode_system_size



Check package

Automated checking

An important part of the package development process is R CMD check. R CMD check automatically checks your code and can automatically detects many common problems that we’d otherwise discover the hard way.

To check our package, we can:

  • use devtools::check()

  • press Ctrl/Cmd + Shift + E

  • click on the ✅Check tab in the Build panel.

This:

  • Ensures that the documentation is up-to-date by running devtools::document().

  • Bundles the package before checking it.

More info on checks here.


Both these run R CMD check which return three types of messages:

  • ERRORs: Severe problems that you should fix regardless of whether or not you’re submitting to CRAN.

  • WARNINGs: Likely problems that you must fix if you’re planning to submit to CRAN (and a good idea to look into even if you’re not).

  • NOTEs: Mild problems. If you are submitting to CRAN, you should strive to eliminate all NOTEs, even if they are false positives.

Let’s Check our package:

Status: 1 NOTE
checking R code for possible problems ... NOTE
recode_system_size: no visible global function definition for ‘mutate’
recode_system_size: no visible global function definition for ‘recode’
recode_system_size: no visible binding for global variable
  ‘system_size’
Undefined global functions or variables:
  mutate recode system_size

See
  ‘/Users/Anna/Documents/workflows/rrcompendium.Rcheck/00check.log’
for details.


R CMD check results
0 errors | 0 warnings | 1 note 

R CMD check succeeded

OK so there’s a couple of flags fro problems in a NOTE. Let’s start troubleshooting with:

recode_system_size: no visible global function definition for ‘mutate’
recode_system_size: no visible global function definition for ‘recode’

This arises because we are using two dplyr functions in our function, mutate and recode. However, we have not specified that they are imported from the dplyr NAMESPACE so the checks look for functions with those names in our package (rrcompendium) instead and obviously can’t find anything.

Add namespace to function notation

To specify the namespace of a function we use the notation <package_name>::<function_name>, so let’s update our function with these details.

Let’s run Check again:

checking dependencies in R code ... WARNING
'::' or ':::' import not declared from: ‘dplyr’

checking R code for possible problems ... NOTE
recode_system_size: no visible binding for global variable
  ‘system_size’
Undefined global functions or variables:
  system_size
R CMD check results
0 errors | 1 warning  | 1 note 


Add dependency

In this next round of checks, the note about undefined global functions mutate and recode is gone but now we have a warning regarding '::' or ':::' import not declared from: ‘dplyr’. It’s flagging the fact that we are wanting to import functions from dplyr but have not yet declared the package as a dependency in the Imports field of the DESCRIPTION file.

We can add dplyr to Imports with:

✔ Setting active project to '/Users/Anna/Documents/workflows/rrcompendium'
✔ Adding 'dplyr' to Imports field in DESCRIPTION
● Refer to functions with `dplyr::fun()`

and the DESCRIPTION file now includes

Imports: 
    bookdown,
    dplyr

Running Check again, the warning is now gone and we are left with the minor note on

recode_system_size: no visible binding for global variable
  ‘system_size’

We’ll ignore this note for the time being. It results from the non-standard evaluation used in dplyr functions. You can find out more about it in the Programming with dplyr vignette.


Test out function

Run 🔨 Install and Restart to ensure the installed package is up to date.

Then let’s read in some data and test out our function:

Parsed with column specification:
cols(
  system_size = col_character(),
  time = col_double(),
  n = col_integer(),
  mean = col_character(),
  plus_sd = col_character(),
  minus_sd = col_character()
)
# A tibble: 10,747 x 6
   system_size     time     n mean  plus_sd minus_sd
   <chr>          <dbl> <int> <chr> <chr>   <chr>   
 1 large       0.         500 <NA>  <NA>    <NA>    
 2 large       0.000359   501 <NA>  <NA>    <NA>    
 3 large       0.00680    502 <NA>  <NA>    <NA>    
 4 large       0.00818    503 <NA>  <NA>    <NA>    
 5 large       0.0199     504 <NA>  <NA>    <NA>    
 6 large       0.0207     505 <NA>  <NA>    <NA>    
 7 large       0.0222     504 <NA>  <NA>    <NA>    
 8 large       0.0242     505 <NA>  <NA>    <NA>    
 9 large       0.0258     506 <NA>  <NA>    <NA>    
10 large       0.0264     507 <NA>  <NA>    <NA>    
# ... with 10,737 more rows
# A tibble: 10,747 x 6
   system_size             time     n mean  plus_sd minus_sd
   <chr>                  <dbl> <int> <chr> <chr>   <chr>   
 1 A. 1000 total sites 0.         500 <NA>  <NA>    <NA>    
 2 A. 1000 total sites 0.000359   501 <NA>  <NA>    <NA>    
 3 A. 1000 total sites 0.00680    502 <NA>  <NA>    <NA>    
 4 A. 1000 total sites 0.00818    503 <NA>  <NA>    <NA>    
 5 A. 1000 total sites 0.0199     504 <NA>  <NA>    <NA>    
 6 A. 1000 total sites 0.0207     505 <NA>  <NA>    <NA>    
 7 A. 1000 total sites 0.0222     504 <NA>  <NA>    <NA>    
 8 A. 1000 total sites 0.0242     505 <NA>  <NA>    <NA>    
 9 A. 1000 total sites 0.0258     506 <NA>  <NA>    <NA>    
10 A. 1000 total sites 0.0264     507 <NA>  <NA>    <NA>    
# ... with 10,737 more rows

It works! 🎉



Test function

Testing is a vital part of package development. It ensures that our code does what you want it to do.

Once you’re set up with a testing framework, the workflow is simple:

  1. Modify your code or tests.

  2. Test your package with Ctrl/Cmd + Shift + T or devtools::test().

  3. Repeat until all tests pass.

Create a test file

Just like usethis::use_r() for package source code files, we can use usethis::use_test() to create the framework for our tests.

✔ Setting active project to '/Users/Anna/Documents/workflows/rrcompendium'
✔ Adding 'testthat' to Suggests field in DESCRIPTION
✔ Creating 'tests/testthat/'
✔ Writing 'tests/testthat.R'
✔ Writing 'tests/testthat/test-process-data.R'
● Modify 'tests/testthat/test-process-data.R'

This will:

  1. Create a tests/testthat directory.

  2. Adds testthat to the Suggests field in the DESCRIPTION.

  3. Creates a file tests/testthat.R that runs all your tests when R CMD check runs.

  4. Creates a test file in tests/testthat/ appending test- to the name argument.

testthat.R

The testthat.R file runs all the tests.

You can use this file to load any additional packages required for testing (although explict NAMESPACE notation :: as in package source code is still preferable to ensure accuracy of tests)

library(testthat)
library(rrcompendium)

test_check("rrcompendium")
test-process-data

usethis::use_test() also creates and opens test file test-process-data and pre-populates it with an example test.

context("test-process-data")

test_that("multiplication works", {         # test desc
  expect_equal(2 * 2, 4)                    # tests
})

There are two elements to any test:

  • desc: test name. Names should be kept as brief as possible, as they are often used as line prefixes.

  • code: test code containing expectations

create test data

To test our function we’ll need some data. The easiest way is to include an example dataset, in this case we’ll just use gillespie.csv. However we need to store the data in a directory that is still accessible when the package is built.

Anything in the .Rbuildignore file will be ignored during building and installation, which currently ignores the entire analysis/ directory, including our data.

^LICENSE\.md$
^rrcompendium\.Rproj$
^\.Rproj\.user$
^README\.Rmd$
^README-.*\.png$
^CONDUCT\.md$
^CONTRIBUTING\.md$
analysis

We can make files available after install by including them in an inst/ directory.

When a package is installed, everything in inst/ is copied into the top-level package directory. You are free to put anything you like in inst/ with one caution: because inst/ is copied into the top-level directory, you should never use a subdirectory with the same name as an existing directory.

This means that you should generally avoid inst/build, inst/data, inst/demo, inst/exec, inst/help, inst/html, inst/inst, inst/libs, inst/Meta, inst/man, inst/po, inst/R, inst/src, inst/tests, inst/tools and inst/vignettes.

Create inst/testdata/ directory

So let’s create an inst/ directory and within it a testdata/ subdirectory to save our example data.

Copy example data

Now let’s make a copy of gillespie.csv into the inst/testdata/ directory:

You should now have an inst folder containing the following files

inst
└── testdata
    └── gillespie.csv
Install and Restart

Run 🔨 Install and Restart so that testdata/ is now included in the build.

We can now use system.file(), which finds the full file names of files in packages, in our test script to load our test data set.

It uses anything supplied to ... to build the path to the file, much like here::here.

So in test-process-data.R, we can now write:

We can also use this dataset to provide a working example of recode_system_size(data) in the function documentation. So let’s go back to R/process-data.R and add an example to our documentation

#' @examples {
#' data <- readr::read_csv(system.file("testdata", "gillespie.csv",
#' package = "rrcompendium"))
#' recode_system_size(data)
#' }

Document and the Install and Restart to update package.


Write test

Let’s now write a couple of tests.

test recoding

First let’s test that recoding works, by checking the unique values of system_size after running recode_system_size:

test dimensions

Let’s also test that the original dimensions of data are preserved after running our function:

The complete test-process-data.R file should look like this:

Because we’re using read_csv from readr in our tests, let’s add it as a dependency by specifying type Suggests.

✔ Setting active project to '/Users/Anna/Documents/workflows/rrcompendium'
✔ Adding 'readr' to Imports field in DESCRIPTION
● Refer to functions with `readr::fun()`

Our DESCRIPTION file now contains:

Imports: 
    bookdown,
    dplyr,
    readr

Once our tests are saved, we’re ready to test our package! 😃


Test package

We can test our package through:

  • More > Test Package in the Build panel
  • Ctrl/Cmd + Shift + T
  • devtools::test().
==> devtools::test()

Loading rrcompendium
Loading required package: testthat
Testing rrcompendium
✔ | OK F W S | Context
✔ |  2       | test-process-data [0.2 s]

══ Results ════════════════════════════════════════════════════════════════
Duration: 0.3 s

OK:       2
Failed:   0
Warnings: 0
Skipped:  0
Our tests pass!! 🎉

Now every time you check your package, the test will also be run automatically.

Let’s commit our work and move on.

Session information


This reproducible R Markdown analysis was created with workflowr 1.1.1