Last updated: 2021-02-18

Checks: 7 0

Knit directory: BloomSail/

This reproducible R Markdown analysis was created with workflowr (version 1.6.2). The Checks tab describes the reproducibility checks that were applied when the results were created. The Past versions tab lists the development history.


Great! Since the R Markdown file has been committed to the Git repository, you know the exact version of the code that produced these results.

Great job! The global environment was empty. Objects defined in the global environment can affect the analysis in your R Markdown file in unknown ways. For reproduciblity it’s best to always run the code in an empty environment.

The command set.seed(20191021) was run prior to running the code in the R Markdown file. Setting a seed ensures that any results that rely on randomness, e.g. subsampling or permutations, are reproducible.

Great job! Recording the operating system, R version, and package versions is critical for reproducibility.

Nice! There were no cached chunks for this analysis, so you can be confident that you successfully produced the results during this run.

Great job! Using relative paths to the files within your workflowr project makes it easier to run your code on other machines.

Great! You are using Git for version control. Tracking code development and connecting the code version to the results is critical for reproducibility.

The results in this page were generated with repository version 233bbc1. See the Past versions tab to see a history of the changes made to the R Markdown and HTML files.

Note that you need to be careful to ensure that all relevant files for the analysis have been committed to Git prior to generating the results (you can use wflow_publish or wflow_git_commit). workflowr only checks the R Markdown file, but you know if there are other scripts or data files that it depends on. Below is the status of the Git repository when the results were generated:


Ignored files:
    Ignored:    .Rhistory
    Ignored:    .Rproj.user/
    Ignored:    data/
    Ignored:    output/Plots/Figures_publication/.tmp.drivedownload/

Unstaged changes:
    Modified:   output/Plots/Figures_publication/Appendix/Fig_A1.pdf
    Modified:   output/Plots/Figures_publication/Appendix/Fig_A2.pdf
    Modified:   output/Plots/Figures_publication/Appendix/Fig_B1.pdf
    Modified:   output/Plots/Figures_publication/Appendix/Fig_B2.pdf
    Modified:   output/Plots/Figures_publication/Appendix/Fig_C1.pdf
    Modified:   output/Plots/Figures_publication/Appendix/Fig_C2.pdf
    Modified:   output/Plots/Figures_publication/Appendix/Fig_C3.pdf
    Modified:   output/Plots/Figures_publication/Appendix/Fig_C4.pdf
    Modified:   output/Plots/Figures_publication/Appendix/Fig_C4.png
    Modified:   output/Plots/Figures_publication/Article/Fig_1.pdf
    Modified:   output/Plots/Figures_publication/Article/Fig_2.pdf
    Modified:   output/Plots/Figures_publication/Article/Fig_3.pdf
    Modified:   output/Plots/Figures_publication/Article/Fig_4.pdf
    Modified:   output/Plots/Figures_publication/Article/Fig_5.pdf
    Modified:   output/Plots/Figures_publication/Article/Fig_6.pdf
    Modified:   output/Plots/response_time/tau_determination_pCO2_corr_flushperiods_nls.pdf

Note that any generated files, e.g. HTML, png, CSS, etc., are not included in this status report because it is ok for generated content to have uncommitted changes.


These are the previous versions of the repository in which changes were made to the R Markdown (analysis/NCP_reconstruction.Rmd) and HTML (docs/NCP_reconstruction.html) files. If you’ve configured a remote Git repository (see ?wflow_git_remote), click on the hyperlinks in the table below to view the files as they were in that past version.

File Version Author Date Message
Rmd 233bbc1 jens-daniel-mueller 2021-02-18 rerun all with empty folders
html 184f00b jens-daniel-mueller 2021-02-18 Build site.
Rmd 955ac1d jens-daniel-mueller 2021-02-18 cleaning
html 43f9d47 jens-daniel-mueller 2021-02-18 Build site.
Rmd 54ddb86 jens-daniel-mueller 2021-02-18 cleaning
html 3d08cda jens-daniel-mueller 2021-02-18 Build site.
Rmd c909ee0 jens-daniel-mueller 2021-02-18 cleaning
html 67dd4d7 jens-daniel-mueller 2021-02-18 Build site.
Rmd cc7316f jens-daniel-mueller 2021-02-18 cleaning
html 7014ec6 jens-daniel-mueller 2021-02-18 Build site.
Rmd c832869 jens-daniel-mueller 2021-02-18 cleaning
html 3e94656 jens-daniel-mueller 2021-02-18 Build site.
Rmd 93a094c jens-daniel-mueller 2021-02-18 cleaning
html 189f202 jens-daniel-mueller 2021-02-16 Build site.
Rmd 06d5293 jens-daniel-mueller 2021-02-16 cleaning
html 0af0021 jens-daniel-mueller 2021-02-15 Build site.
Rmd 4878a06 jens-daniel-mueller 2021-02-15 cleaning
html 70a8950 jens-daniel-mueller 2021-02-11 Build site.
Rmd 4bdeb1f jens-daniel-mueller 2021-02-11 rerun all with empty folders
html 8051798 jens-daniel-mueller 2021-02-10 Build site.
Rmd 9477a18 jens-daniel-mueller 2021-02-10 rerun all with empty folders
html b70ce3a jens-daniel-mueller 2021-02-04 Build site.
Rmd f8ff3d7 jens-daniel-mueller 2021-02-04 resized figures
html 2394871 jens-daniel-mueller 2021-02-03 Build site.
Rmd 6747fd9 jens-daniel-mueller 2021-02-03 resized figures
html d6c7395 jens-daniel-mueller 2021-02-02 Build site.
Rmd 4de153f jens-daniel-mueller 2021-02-02 renamed figures
html 289b763 jens-daniel-mueller 2021-01-30 Build site.
Rmd b470c95 jens-daniel-mueller 2021-01-30 resized figures
html 6adb9ab jens-daniel-mueller 2021-01-29 Build site.
Rmd 54ec4b0 jens-daniel-mueller 2021-01-29 renamed appendix figures
html 2677b39 jens-daniel-mueller 2021-01-28 Build site.
Rmd 3eae87b jens-daniel-mueller 2021-01-28 modified figs
html c5fc34c jens-daniel-mueller 2021-01-22 Build site.
Rmd f656a73 jens-daniel-mueller 2021-01-22 all figs revised
html a7950fd jens-daniel-mueller 2021-01-22 Build site.
Rmd 88fcb00 jens-daniel-mueller 2021-01-22 modified figs
html cde4f1d jens-daniel-mueller 2021-01-08 Build site.
Rmd 7cd025c jens-daniel-mueller 2021-01-08 modified figs
html e55d103 jens-daniel-mueller 2021-01-05 Build site.
Rmd f31d3e2 jens-daniel-mueller 2021-01-05 revised figure 4 and 6
html 0bc930a jens-daniel-mueller 2021-01-05 Build site.
Rmd 1fb97c7 jens-daniel-mueller 2021-01-05 revised figure 6
html 4277235 jens-daniel-mueller 2021-01-05 Build site.
Rmd 58c1637 jens-daniel-mueller 2021-01-05 new Fig_AX names, A5 added
html 2a105b2 jens-daniel-mueller 2020-11-04 Build site.
Rmd 2c4509a jens-daniel-mueller 2020-11-04 added panel annotation
html 7e29c30 jens-daniel-mueller 2020-11-02 Build site.
Rmd 7e5a700 jens-daniel-mueller 2020-11-02 renamed and revised figures for publication
html 61753ef jens-daniel-mueller 2020-10-30 Build site.
Rmd 0628954 jens-daniel-mueller 2020-10-30 renamed plot output
html 838a9c3 jens-daniel-mueller 2020-10-30 Build site.
Rmd 37582a4 jens-daniel-mueller 2020-10-30 updated plot
html bef182d jens-daniel-mueller 2020-10-30 Build site.
Rmd 0b9ca47 jens-daniel-mueller 2020-10-30 updated plot
html 9a3f42a jens-daniel-mueller 2020-10-24 Build site.
html dd86a70 jens-daniel-mueller 2020-10-21 Build site.
Rmd 0711e3e jens-daniel-mueller 2020-10-21 display MLD mean and sd values
html 05248bf jens-daniel-mueller 2020-10-20 Build site.
html 1c4fe8e jens-daniel-mueller 2020-10-20 table with time series in depth intervals added
html 6896725 jens-daniel-mueller 2020-10-01 Build site.
html 9f66019 jens-daniel-mueller 2020-10-01 Build site.
html 27c5431 jens-daniel-mueller 2020-09-29 Build site.
Rmd 2e0f902 jens-daniel-mueller 2020-09-29 all parameters separate, rebuild
html 1d01685 jens-daniel-mueller 2020-09-28 Build site.
html 1278900 jens-daniel-mueller 2020-09-25 Build site.
html 904f0f7 jens-daniel-mueller 2020-09-23 Build site.
html 66bf52a jens-daniel-mueller 2020-09-23 Build site.
Rmd 0c8eed6 jens-daniel-mueller 2020-09-23 included postprocessed cleaned data
html e4797a2 jens-daniel-mueller 2020-07-01 Build site.
Rmd 857208b jens-daniel-mueller 2020-07-01 update NCP recon figure
html c919fb7 jens-daniel-mueller 2020-06-29 Build site.
Rmd 1461cb6 jens-daniel-mueller 2020-06-29 Fig update for talk
html 603af23 jens-daniel-mueller 2020-05-25 Build site.
html 3414c23 jens-daniel-mueller 2020-05-25 Build site.
html 9eb7215 jens-daniel-mueller 2020-05-25 Build site.
Rmd 80a7e08 jens-daniel-mueller 2020-05-25 Removed separate BloomSail and fm+gt reconstruction
html c5cf8de jens-daniel-mueller 2020-05-25 Build site.
Rmd 2b97ae3 jens-daniel-mueller 2020-05-25 added gas flux to reconstructed iCT
html 4dd0f4f jens-daniel-mueller 2020-05-25 Build site.
Rmd f7f0983 jens-daniel-mueller 2020-05-25 added gas flux to reconstructed iCT
html 1b366c4 jens-daniel-mueller 2020-05-25 Build site.
Rmd eef261f jens-daniel-mueller 2020-05-25 TPD CPD appendix plots
html 9166c1d jens-daniel-mueller 2020-05-20 Build site.
Rmd ef99640 jens-daniel-mueller 2020-05-20 finalized reconstruction approach
html 1e15837 jens-daniel-mueller 2020-05-20 Build site.
Rmd 2378108 jens-daniel-mueller 2020-05-20 finalized iCT reconstruction
html 6aad8d7 jens-daniel-mueller 2020-05-19 Build site.
Rmd d7aa227 jens-daniel-mueller 2020-05-19 finalized integration depth estimates
html ae5779d jens-daniel-mueller 2020-05-19 Build site.
Rmd 5651fe5 jens-daniel-mueller 2020-05-19 removed deep warming signal for z_pen determination
html 6e3d899 jens-daniel-mueller 2020-05-19 Build site.
Rmd 0ba33ec jens-daniel-mueller 2020-05-19 cleaned NCP reconstruction IV
html 7f4066e jens-daniel-mueller 2020-05-19 Build site.
Rmd 536cb1a jens-daniel-mueller 2020-05-19 cleaned NCP reconstruction III
html dd7e745 jens-daniel-mueller 2020-05-19 Build site.
Rmd 33c4313 jens-daniel-mueller 2020-05-19 cleaned NCP reconstruction II
html 57b5f60 jens-daniel-mueller 2020-05-19 Build site.
Rmd fa8ce00 jens-daniel-mueller 2020-05-19 cleaned NCP reconstruction
html 6fcea7b jens-daniel-mueller 2020-05-18 Build site.
Rmd 09ccf10 jens-daniel-mueller 2020-05-18 merged tm and gt NCP reconstruction

library(tidyverse)
library(ncdf4)
library(seacarb)
library(oce)
library(patchwork)
library(lubridate)
library(metR)

1 Scope of this script

In order to test how well the depth-integrated CT* estimates can be reproduced if only surface CO2 data were available, the following reconstruction approaches were tested:

  • Mixed layer depth: Integration of surface observation across the MLD, assuming homogeneous vertical patterns
  • CT profile reconstruction: Vertical reconstruction of incremental CT changes based on profiles of incremental changes in temperature
  • Temperature penetration depth: Integration of surface observation across the temperature penetration depth, assuming similar vertical extension as for CT drawdown.

Note: The reconstruction of CT* profiles and the integration across the temperature penetration depth should produce very similar results. However, the latter avoids to create misinterpretable information about the vertical distribution of CT*.

The integration depth parameterizations were tested on two data sets, namely:

  • BloomSail observations, restricted to CT* data in surface water
  • SOOP Finnmaid pCO2 + vertical hydrographical data from GETM model
date_CT_min <- ymd_hms("2018-07-24 07:58:29")
date_tem_max <- ymd_hms("2018-08-04 00:00:00")

2 BloomSail

1m gridded, downcast profiles were used.

Mean CO2 data from upper 6 meters were used as surface values.

# read data
tm_profiles_ID <-
  read_csv(
    here::here(
      "data/intermediate/_merged_data_files/NCP_best_guess",
      "tm_profiles_ID.csv"
    )
  )

tm_profiles_ID <- tm_profiles_ID %>% 
  select(-c(date_ID))

# calculate cumulative changes

tm_profiles_ID_long <- tm_profiles_ID %>%
  select(-c(pCO2, sal)) %>% 
  pivot_longer(c("tem", "CT_star"), values_to = "value", names_to = "var") %>% 
  group_by(var, dep) %>%
  arrange(date_time_ID) %>%
  mutate(date_time_ID_diff = as.numeric(date_time_ID - lag(date_time_ID)),
         value_diff = value     - lag(value, default = first(value)),
         value_diff_daily = value_diff / date_time_ID_diff,
         value_cum = cumsum(value_diff)) %>% 
  ungroup()

2.1 TPD and CPD

Temperature penetration depth (TPD) and CT* penetration depth (CPD) were investigated based on the BloomSail data.

2.1.1 Cumulative profile July 9

# subset date for cumulative assesment
tm_profiles_ID_long_day <- tm_profiles_ID_long %>%
  filter(ID == 180709)

# calculate integrated value of pos/neg changes for Temp/CT*
# and relative contribution with increasing water depth 
tm_profiles_ID_long_day_dep <- tm_profiles_ID_long_day %>%
  select(var, dep, value_cum) %>%
  mutate(
    value_cum = if_else(value_cum > 0 & var == "CT_star",
                        NaN, value_cum),
    value_cum = if_else(value_cum < 0 & var == "tem",
                        NaN, value_cum)
  ) %>%
  group_by(var) %>%
  arrange(dep) %>%
  mutate(
    value_cum_i = sum(value_cum, na.rm = TRUE),
    value_cum_dep = cumsum(value_cum),
    value_cum_i_rel = value_cum_dep / value_cum_i * 100
  ) %>%
  ungroup()

# cumulative integrated values
value_cum <- tm_profiles_ID_long_day_dep %>%
  group_by(var) %>%
  summarise(value_cum_i = mean(value_cum_i)) %>%
  ungroup()

# cumulative surface values
value_surface <- tm_profiles_ID_long_day %>%
  select(var, dep, value_cum) %>%
  filter(dep < parameters$surface_dep) %>%
  group_by(var) %>%
  summarise(value_surface = mean(value_cum)) %>%
  ungroup()

# calculate penentration depth for T and C
PD <- full_join(value_cum, value_surface)
PD <- PD %>%
  mutate(PD = value_cum_i / value_surface)

rm(value_cum, value_surface)
p_tm_profiles_ID_long <- tm_profiles_ID_long_day %>%
  arrange(dep) %>%
  ggplot(aes(value_cum, dep)) +
  geom_hline(aes(yintercept = parameters$i_dep_lim, col = "integration")) +
  geom_hline(data = PD, aes(yintercept = PD, col = "penetration")) +
  geom_vline(xintercept = 0) +
  geom_point() +
  geom_path() +
  scale_y_reverse() +
  scale_color_brewer(palette = "Dark2", guide = FALSE) +
  labs(y = "Depth (m)", x = "Cumulative change") +
  theme(legend.position = "left") +
  facet_wrap(var ~ ., ncol = 1, scales = "free_x")

p_tm_profiles_ID_long_rel <- tm_profiles_ID_long_day_dep %>%
  ggplot(aes(value_cum_i_rel, dep)) +
  geom_hline(aes(yintercept = parameters$i_dep_lim, col = "integration")) +
  geom_hline(data = PD, aes(yintercept = PD, col = "penetration")) +
  geom_vline(xintercept = 90) +
  geom_point() +
  geom_line() +
  scale_y_reverse(limits = c(25, 0)) +
  scale_color_brewer(palette = "Dark2", name = "Depth") +
  scale_x_continuous(limits = c(0, NA)) +
  labs(x = "Relative contribution (%)") +
  facet_wrap(var ~ ., ncol = 1, scales = "free_x") +
  theme(axis.title.y = element_blank())

p_tm_profiles_ID_long + p_tm_profiles_ID_long_rel

PD
# A tibble: 2 x 4
  var     value_cum_i value_surface    PD
  <chr>         <dbl>         <dbl> <dbl>
1 CT_star      -286.         -28.4  10.1 
2 tem            16.3          1.65  9.89
rm(tm_profiles_ID_long_day_dep,
   p_tm_profiles_ID_long,
   p_tm_profiles_ID_long_rel)

2.1.2 Incremental profile July 9

col_value <- "red"

p_CT_star <-
  tm_profiles_ID_long_day %>%
  filter(var == "CT_star") %>%
  arrange(dep) %>%
  ggplot() +
  geom_col(
    data = tm_profiles_ID_long_day %>%
      filter(var == "CT_star", value_diff_daily < 0),
    aes(x = value_diff_daily, y = dep),
    width = 1,
    alpha = 0.2,
    orientation = "y"
  ) +
  geom_vline(xintercept = 0) +
  scale_y_reverse(expand = c(0, 0)) +
  annotate(
    "text",
    x = -6,
    y = 11,
    label = "CPD",
    col = col_value,
    size = geom_text_size
  ) +
  annotate(
    "text",
    x = -3.5,
    y = 2.5,
    label = "Integrated\nchange",
    size = geom_text_size
  ) +
  geom_point(aes(value_diff_daily, dep)) +
  geom_path(aes(value_diff_daily, dep)) +
  geom_hline(data = PD %>% filter(var == "CT_star"),
             aes(yintercept = PD),
             col = col_value) +
  labs(y = "Depth (m)", x = expression(paste(Delta ~ C[T], "*") ~ (µmol ~ kg ^ {
    -1
  }))) +
  theme(
    legend.title = element_blank(),
    axis.text.y = element_blank(),
    axis.ticks.y = element_blank(),
    axis.title.y = element_blank()
  )

p_tem <-
  tm_profiles_ID_long_day %>%
  filter(var == "tem") %>%
  arrange(dep) %>%
  ggplot() +
  geom_col(
    data = tm_profiles_ID_long_day %>%
      filter(var == "tem", value_diff_daily > 0),
    aes(x = value_diff_daily, y = dep),
    width = 1,
    alpha = 0.2,
    orientation = "y"
  ) +
  geom_vline(xintercept = 0) +
  scale_y_reverse(expand = c(0, 0)) +
  annotate(
    "text",
    x = 0.4,
    y = 11,
    label = "PD",
    col = col_value,
    size = geom_text_size
  ) +
  annotate(
    "text",
    x = 0.2,
    y = 2.5,
    label = "Integrated\nchange",
    size = geom_text_size
  ) +
  geom_point(aes(value_diff_daily, dep)) +
  geom_path(aes(value_diff_daily, dep)) +
  geom_hline(data = PD %>% filter(var == "tem"),
             aes(yintercept = PD),
             col = col_value) +
  labs(y = "Depth (m)", x = expression(Delta ~ Temperature ~ (degree * C))) +
  theme(legend.title = element_blank())

p_tem + p_CT_star +
  plot_layout(guides = 'collect') +
  plot_annotation(tag_levels = 'a')

ggsave(
  here::here("output/Plots/Figures_publication/appendix",
             "Fig_C4.pdf"),
  width = 120,
  height = 110,
  dpi = 300,
  units = "mm"
)

ggsave(
  here::here("output/Plots/Figures_publication/appendix",
             "Fig_C4.png"),
  width = 120,
  height = 110,
  dpi = 300,
  units = "mm"
)

rm(PD, tm_profiles_ID_long_day, p_tem, p_CT_star, col_value)

2.1.3 Incremental time series

A time series of TPD and CPD was calculated, based on the incremental (ie from cruise day to cruise day) changes of temperature / CT*, taking only pos. / neg. changes of both parameters into account.

# surface values
diff_surface <- tm_profiles_ID_long %>%
  filter(dep < parameters$surface_dep) %>%
  group_by(ID, var) %>%
  summarise(value_diff_surface = mean(value_diff, na.rm = TRUE)) %>%
  ungroup() %>%
  mutate(
    value_diff_surface = if_else(value_diff_surface > 0 & var == "CT_star",
                                 NaN, value_diff_surface),
    value_diff_surface = if_else(value_diff_surface < 0 &
                                   var == "tem",
                                 NaN, value_diff_surface)
  )

tm_profiles_ID_long <- full_join(tm_profiles_ID_long, diff_surface)
rm(diff_surface)

# calculate penetration depths for T and C
PD <- tm_profiles_ID_long %>%
  mutate(
    value_diff = if_else(value_diff > 0 & var == "CT_star",
                         NaN, value_diff),
    value_diff = if_else(value_diff < 0 & var == "tem",
                         NaN, value_diff)
  ) %>%
  group_by(var, ID, date_time_ID) %>%
  summarise(
    value_diff_int = sum(value_diff, na.rm = TRUE),
    value_diff_surface = mean(value_diff_surface, na.rm = TRUE)
  ) %>%
  ungroup() %>%
  mutate(i_dep = value_diff_int / value_diff_surface)

# calculate temporal mean
PD_mean <- PD %>%
  group_by(var) %>%
  summarise(i_dep_mean = mean(i_dep, na.rm = TRUE),
            i_dep_sd = sd(i_dep, na.rm = TRUE)) %>%
  ungroup()
p_surface <- PD %>%
  ggplot(aes(date_time_ID, value_diff_surface)) +
  geom_hline(yintercept = 0) +
  geom_line() +
  geom_point() +
  scale_y_reverse(name = "Change surface value") +
  scale_x_datetime(breaks = "week", date_labels = "%d %b") +
  scale_color_brewer(palette = "Set1", direction = -1) +
  theme(axis.title.x = element_blank(),
        legend.title = element_blank()) +
  facet_grid(var ~ ., scales = "free_y")

p_integrated <- PD %>%
  ggplot(aes(date_time_ID, value_diff_int)) +
  geom_hline(yintercept = 0) +
  geom_line() +
  geom_point() +
  scale_y_reverse(name = "Change integrated value") +
  scale_x_datetime(breaks = "week", date_labels = "%d %b") +
  scale_color_brewer(palette = "Set1", direction = -1) +
  theme(axis.title.x = element_blank(),
        legend.title = element_blank()) +
  facet_grid(var ~ ., scales = "free_y")

p_pen_dep <- PD %>%
  ggplot(aes(date_time_ID, i_dep, col = var)) +
  geom_hline(yintercept = 0) +
  geom_hline(data = PD_mean,
             aes(
               yintercept = i_dep_mean,
               col = var,
               linetype = "mean"
             )) +
  geom_line(aes(linetype = "cruise")) +
  geom_point() +
  scale_y_reverse(name = "Penetration depth (m)", breaks = seq(0, 20, 5)) +
  scale_x_datetime(breaks = "week", date_labels = "%d %b") +
  scale_color_brewer(palette = "Set1", direction = -1) +
  theme(axis.title.x = element_blank(),
        legend.title = element_blank())


p_surface + p_integrated + p_pen_dep +
  plot_layout(ncol = 1)

PD_mean
# A tibble: 2 x 3
  var     i_dep_mean i_dep_sd
  <chr>        <dbl>    <dbl>
1 CT_star       10.2     1.04
2 tem           11.5     2.46
rm(p_surface, p_integrated, p_pen_dep)
rm(PD, PD_mean, tm_profiles_ID_long)

3 GETM model

3.1 Read netcdf file

# read netcdf file
nc <- 
  nc_open(here::here("data/input/GETM", "Finnmaid.E.3d.2018.nc"))

# extract latitude vector
lat <- ncvar_get(nc, "latc")

# extract start time
time_start <- nc$dim$time$units %>%
  substr(start = 15, stop = 33) %>%
  ymd_hms()

# create time vecotr
t <- time_start + ncvar_get(nc, "time")
rm(time_start)

# extract depths vector
d <- ncvar_get(nc, "zax")

# read model data
for (var_3d in c("salt", "temp")) {
  
  # store the data in a 3-dimensional array
  array <-
    ncvar_get(nc, var_3d) 
  
  # find NA value
  fillvalue <- ncatt_get(nc, var_3d, "_FillValue")
  
  # replace NA value with NA
  array[array == fillvalue$value] <- NA
  
  for (i in seq(1, length(t), 1)) {
    # i <- 3
    array_slice <- array[, , i] # slices data from one day
    
    # convert to tibble
    array_slice_df <- as.data.frame(t(array_slice))
    array_slice_df <- as_tibble(array_slice_df)
    
    # rename, format and subset data
    gt_3d_part <- array_slice_df %>%
      set_names(as.character(lat)) %>%
      mutate(dep = -d) %>%
      gather("lat", "value", 1:length(lat)) %>%
      mutate(lat = as.numeric(lat)) %>%
      filter(
        lat > parameters$getm_low_lat,
        lat < parameters$getm_high_lat,
        dep <= parameters$max_dep
      ) %>%
      mutate(var = var_3d,
             date_time = t[i]) %>%
      select(date_time, dep, value, var)
    
    
    if (exists("gt_3d")) {
      gt_3d <- bind_rows(gt_3d, gt_3d_part)
    } else {
      gt_3d <- gt_3d_part
    }
    
    rm(array_slice, array_slice_df, gt_3d_part)
    
  }
  rm(array, fillvalue)
  
}

nc_close(nc)
rm(nc)

# subset time period
# calculate daily, regional mean profile in study area
gt_3d_long <- gt_3d %>%
  filter(date_time >= parameters$getm_start_date &
           date_time <= parameters$getm_end_date) %>%
  group_by(date_time, var, dep) %>%
  summarise_all(list(value =  ~ mean(., na.rm = TRUE))) %>% # regional averaging
  ungroup()

gt_3d <- gt_3d_long %>%
  pivot_wider(values_from = value, names_from = var) %>%
  rename(sal = salt, tem = temp)


rm(i, lat, d, t, var_3d)

3.2 Sal and tem profiles

gt_3d_long %>%
  ggplot(aes(value, dep,
             col = date_time,
             group = date_time)) +
  geom_path() +
  scale_y_reverse(expand = c(0, 0)) +
  scale_color_viridis_c(name = "Date", trans = "time") +
  facet_wrap( ~ var, scales = "free_x", ncol = 2)

rm(gt_3d_long)

3.3 Comparison BloomSail

Vertical, 1m-gridded BloomSail CTD profiles were used for comparison with GETM results. Note that the sampling location does not match exactly.

3.3.1 Interpolate GETM to BloomSail

GETM results were linearly interpolated to the BloomSail depth levels and the mean cruise dates.

gt_3d_int <- gt_3d %>%
  mutate(dep_int = dep + 0.5) %>%
  group_by(date_time) %>%
  mutate(sal_int = approxfun(dep, sal)(dep_int),
         tem_int = approxfun(dep, tem)(dep_int)) %>%
  ungroup() %>%
  select(date_time,
         dep = dep_int,
         sal = sal_int,
         tem = tem_int) %>%
  drop_na()

rm(gt_3d)
# join GETM and BloomSail profiles
tm_gt_3d <- full_join(
  gt_3d_int,
  tm_profiles_ID %>% select(date_time = date_time_ID,
                            dep, sal, tem),
  by = c("date_time", "dep"),
  suffix = c("_gt", "_tm")
)

# calculate density profiles
tm_gt_3d <- tm_gt_3d  %>%
  mutate(
    rho_gt = swSigma(
      salinity = sal_gt,
      temperature = tem_gt,
      pressure = dep / 10
    ),
    rho_tm = swSigma(
      salinity = sal_tm,
      temperature = tem_tm,
      pressure = dep / 10
    )
  )

# interpolate to BloomSail time stamp
tm_gt_3d <- tm_gt_3d %>%
  arrange(date_time) %>%
  group_by(dep) %>%
  mutate(
    tem_gt = approxfun(date_time, tem_gt)(date_time),
    sal_gt = approxfun(date_time, sal_gt)(date_time),
    rho_gt = approxfun(date_time, rho_gt)(date_time)
  ) %>%
  ungroup() %>%
  drop_na()

3.3.2 S, T, rho profiles

# convert to long format
tm_gt_3d_long <- tm_gt_3d %>%
  pivot_longer(
    sal_gt:rho_tm,
    values_to = "value",
    names_to = c("var", "source"),
    names_sep = "_"
  )

tm_gt_3d_long %>%
  ggplot(aes(value, dep,
             col = date_time,
             group = date_time)) +
  geom_path() +
  scale_y_reverse(expand = c(0, 0), name = "Depth (m)") +
  scale_color_viridis_c(name = "Date", trans = "time") +
  facet_grid(source ~ var, scales = "free_x")
STD profiles modeled with GETM (upper panels, gt) and measured during BloomSail campaign (lower panels, ts)

STD profiles modeled with GETM (upper panels, gt) and measured during BloomSail campaign (lower panels, ts)

3.3.3 S, T, rho offset profiles

tm_gt_3d <- tm_gt_3d_long %>%
  pivot_wider(values_from = "value", names_from = "source") %>%
  mutate(value_diff = gt - tm)

tm_gt_3d %>%
  ggplot(aes(value_diff, dep,
             col = date_time,
             group = date_time)) +
  geom_vline(xintercept = 0, col = "red") +
  geom_path() +
  scale_y_reverse(expand = c(0, 0), name = "Depth (m)") +
  scale_color_viridis_c(name = "Date", trans = "time") +
  facet_grid(. ~ var, scales = "free_x") +
  labs(x = "Difference GETM (gt) - Bloomsail (ts)")
Offset STD profiles comparing modeled with GETM (upper panels, gt) and measured during BloomSail campaign (lower panels, ts)

Offset STD profiles comparing modeled with GETM (upper panels, gt) and measured during BloomSail campaign (lower panels, ts)

rm(tm_gt_3d, tm_gt_3d_long)

4 SOOP Finnmaid

4.1 Data preparation

fm <-
 read_csv(here::here("data/intermediate/_summarized_data_files",
                      "fm_bloomsail.csv"))

fm <- fm %>% 
  filter(date_time > parameters$getm_start_date,
         date_time < parameters$getm_end_date) %>% 
  select(ID, date_time, sensor, sal, tem, pCO2) %>% 
  mutate(ID = as.factor(ID))

4.1.1 CT* calculation

Calculate CT* based on fixed AT and salinity mean values.

# read mean bottle data
fixed_values <- 
  read_csv(here::here("data/intermediate/_summarized_data_files", "tb_fix.csv"))

# calculate CT*
fm <- fm %>%
  mutate(
    CT_star = carb(
      24,
      var1 = pCO2,
      var2 = fixed_values$AT * 1e-6,
      S = fixed_values$sal,
      T = tem,
      k1k2 = "m10",
      kf = "dg",
      ks = "d",
      gas = "insitu"
    )[, 16] * 1e6
  )

4.1.2 Regional averaging

Calculate regional mean and sd values for each crossing of the area.

fm_ID <- fm %>%
  pivot_longer(c(pCO2, sal, tem, CT_star),
               values_to = "value",
               names_to = "var") %>%
  group_by(ID) %>%
  mutate(date_time_ID = mean(date_time)) %>%
  ungroup() %>%
  select(-date_time) %>%
  group_by(ID, date_time_ID, sensor, var) %>%
  summarise_all(list( ~ mean(.), ~ sd(.)), na.rm = TRUE) %>%
  ungroup() %>%
  rename(value = mean)

4.1.3 Read tm profile data

Read original profile data and calculate surface mean and sd values.

tm_profiles <-
  read_csv(
    here::here(
      "data/intermediate/_merged_data_files/NCP_best_guess",
      "tm_profiles.csv"
    )
  )

# surface mean calculation
tm_profiles_ID_long_surface <- tm_profiles %>%
  filter(dep < parameters$surface_dep) %>%
  select(-c(dep, date_ID, station, date_time, lat, lon, pCO2_corr)) %>%
  mutate(ID = as.factor(ID)) %>%
  pivot_longer(sal:CT_star, values_to = "value", names_to = "var") %>%
  group_by(ID, date_time_ID, var) %>%
  summarise_all(list( ~ mean(.), ~ sd(.)), na.rm = TRUE) %>%
  ungroup()

4.1.4 Timeseries

fm_ID %>%
  ggplot() +
  geom_rect(data = fixed_values,
            aes(
              xmin = start,
              xmax = end,
              ymin = -Inf,
              ymax = Inf
            ),
            alpha = 0.2) +
  geom_path(aes(x = date_time_ID, y = value)) +
  geom_ribbon(aes(
    x = date_time_ID,
    y = value,
    ymax = value + sd,
    ymin = value - sd,
    fill = "Finnmaid"
  ),
  alpha = 0.3) +
  geom_ribbon(
    data = tm_profiles_ID_long_surface,
    aes(
      x = date_time_ID,
      ymin = mean - sd,
      ymax = mean + sd,
      fill = "BloomSail"
    ),
    alpha = 0.3
  ) +
  geom_point(aes(x = date_time_ID, y = value, col = sensor)) +
  geom_point(data = tm_profiles_ID_long_surface,
             aes(x = date_time_ID, y = mean, col = "BloomSail")) +
  geom_line(data = tm_profiles_ID_long_surface,
            aes(x = date_time_ID, y = mean, col = "BloomSail")) +
  facet_grid(var ~ ., scales = "free_y") +
  scale_color_brewer(palette = "Set1") +
  scale_fill_brewer(palette = "Set1", name = "+/- SD") +
  scale_x_datetime(date_breaks = "week",
                   date_labels = "%b %d") +
  theme(axis.title.x = element_blank())

4.1.5 Missing observations

The observational gaps in the Finnmaid SST and CT* time series were filled with:

  • two BloomSail observations
  • an interpolated Finnmaid value to match the starting date

The time series was restricted to the period where BloomSail observations are available.

# create data frame with start dates
tm_start_date <- tm_profiles_ID_long_surface %>% 
  filter(ID %in% c("180705"),
         var %in% c("tem", "CT_star")) %>% 
  select(date_time_ID, ID, var) %>% 
  mutate(sensor = "interpolated")

# add start dates to Finnmaid data
fm_tm_ID <- full_join(fm_ID, tm_start_date) %>% 
  arrange(date_time_ID) %>% 
  filter(var %in% c("tem", "CT_star"))

# interpolate Finnmaid to BloomSail start date
fm_tm_ID <- fm_tm_ID %>% 
  group_by(var) %>% 
  mutate(value = approxfun(date_time_ID, value)(date_time_ID)) %>% 
  ungroup()

rm(tm_start_date)
# subset BloomSail data in Finnmaid gap
tm_gap <- tm_profiles_ID_long_surface %>%
  filter(ID %in% c("180718", "180723"),
         var %in% c("tem", "CT_star")) %>%
  select(date_time_ID, ID, var, value = mean) %>%
  mutate(sensor = "BloomSail")

# add data to fill Finnmaid gap
fm_tm_ID <- full_join(fm_tm_ID, tm_gap) %>%
  arrange(date_time_ID) %>%
  select(-sd) %>%
  filter(var %in% c("tem", "CT_star")) %>%
  mutate(
    period = "BloomSail",
    period = if_else(date_time_ID < fixed_values$start, "pre-BloomSail", period),
    period = if_else(date_time_ID > fixed_values$end, "post-BloomSail", period)
  )

# filter only Finnmaid data within BloomSail period
fm_tm_ID <- fm_tm_ID %>%
  filter(period == "BloomSail") %>%
  select(-period)

rm(fm_ID, fm, tm_gap, tm_profiles_ID_long_surface, tm_profiles, fixed_values)

4.1.6 Final time series

fm_tm_ID %>%
  ggplot() +
  geom_path(aes(date_time_ID, value)) +
  geom_point(aes(date_time_ID, value, col = sensor)) +
  facet_grid(var ~ ., scales = "free_y") +
  scale_color_brewer(palette = "Set1") +
  scale_x_datetime(date_breaks = "week",
                   date_labels = "%b %d") +
  theme(axis.title.x = element_blank())

5 Merge all data sets

5.1 Merge fm and gt

# convert to wide format
fm_tm_ID_wide <- fm_tm_ID %>%
  filter(var %in% c("CT_star")) %>%
  select(date_time_ID, var, sensor, value) %>%
  pivot_wider(values_from = value, names_from = var)

# extend surface data with depth grid
fm_gt <- expand_grid(fm_tm_ID_wide, dep = unique(gt_3d_int$dep))

# join Finnmaid and GETM data
fm_gt <- full_join(fm_gt,
                   gt_3d_int %>% rename(date_time_ID = date_time)) %>%
  arrange(date_time_ID)

rm(fm_tm_ID_wide, fm_tm_ID, gt_3d_int)

5.2 Interpolate gt time stamp to fm

GETM data are interpolated to the time of Finnmaid observations.

fm_gt <- fm_gt %>%
  arrange(date_time_ID) %>%
  group_by(dep) %>%
  mutate(
    tem = approxfun(date_time_ID, tem)(date_time_ID),
    sal = approxfun(date_time_ID, sal)(date_time_ID)
  ) %>%
  ungroup() %>%
  arrange(dep) %>%
  filter(!is.na(CT_star))

5.3 Bind tm and fm_gt

Here, we merge the in-situ sensor data from SV Tina V with the Finnmaid+GETM data set, in order to perform following computations only once.

# subset relevant columns and assign source label
tm_profiles_ID <- tm_profiles_ID %>%
  select(-c(ID, pCO2)) %>%
  mutate(source = "tm",
         sensor = "BloomSail")

fm_gt <- fm_gt %>%
  mutate(source = "fm")

# Merge data sets
tm_fm_gt <- bind_rows(tm_profiles_ID, fm_gt)

rm(fm_gt, tm_profiles_ID)

5.4 Comparison

5.4.1 Surface time series

# convert to long format
tm_fm_gt_long <- tm_fm_gt %>%
  pivot_longer(sal:CT_star, values_to = "value", names_to = "var")

tm_fm_gt_long %>%
  filter(dep == 3.5) %>%
  ggplot(aes(date_time_ID, value, col = source)) +
  geom_path() +
  geom_point() +
  scale_x_datetime(date_breaks = "week",
                   date_labels = "%b %d") +
  facet_grid(var ~ ., scales = "free_y") +
  labs(title = "Time series at 3.5 m") +
  theme(axis.title.x = element_blank())

5.4.2 Hovmoeller temperature

bin <- 2

tm_fm_gt %>%
  ggplot(aes(date_time_ID, dep, z = tem)) +
  geom_contour_fill(breaks = MakeBreaks(bin)) +
  geom_vline(aes(xintercept = date_time_ID),
             col = "white",
             linetype = "1f") +
  scale_fill_viridis_c(
    name = "tem",
    option = "B",
    guide = "colorstrip",
    breaks = MakeBreaks(bin)
  ) +
  scale_y_reverse() +
  scale_x_datetime(date_breaks = "week",
                   date_labels = "%b %d") +
  coord_cartesian(expand = 0) +
  theme(axis.title.x = element_blank()) +
  facet_grid(source ~ .)

rm(bin)

6 Integration depths

6.1 MLD

6.1.1 Density calculation

tm_fm_gt <- tm_fm_gt %>%
  mutate(rho = swSigma(
    salinity = sal,
    temperature = tem,
    pressure = dep / 10
  ))

6.1.2 Hovmoeller density

bin <- 0.5

tm_fm_gt %>%
  ggplot() +
  geom_contour_fill(aes(date_time_ID, dep, z = rho),
                    breaks = MakeBreaks(bin)) +
  geom_vline(aes(xintercept = date_time_ID),
             col = "white",
             linetype = "1f") +
  scale_fill_viridis_c(
    name = "rho",
    option = "B",
    guide = "colorstrip",
    breaks = MakeBreaks(bin),
    direction = -1
  ) +
  scale_y_reverse() +
  scale_x_datetime(date_breaks = "week",
                   date_labels = "%b %d") +
  coord_cartesian(expand = 0) +
  theme(axis.title.x = element_blank()) +
  facet_grid(source ~ .)

rm(bin)

6.1.3 MLD calculation

tm_fm_gt_MLD <- expand_grid(tm_fm_gt, rho_lim = parameters$rho_lim_integration_depths)

tm_fm_gt_MLD <- tm_fm_gt_MLD %>%
  arrange(dep) %>%
  group_by(date_time_ID, source, rho_lim) %>%
  mutate(d_rho = rho - first(rho)) %>%
  filter(d_rho > rho_lim) %>%
  summarise(MLD = min(dep)) %>%
  ungroup() %>%
  mutate(rho_lim = as.factor(rho_lim))

6.1.4 Hovmoeller MLD

bin <- 2

tm_fm_gt %>%
  ggplot() +
  geom_contour_fill(aes(date_time_ID, dep, z = tem),
                    breaks = MakeBreaks(bin)) +
  geom_path(data = tm_fm_gt_MLD, aes(date_time_ID, MLD, col = rho_lim)) +
  scale_fill_gradient(
    name = "Tem (°C)",
    guide = "colorstrip",
    breaks = MakeBreaks(bin),
    high = "grey80",
    low = "grey5"
  ) +
  scale_color_viridis_d() +
  scale_y_reverse() +
  scale_x_datetime(date_breaks = "week",
                   date_labels = "%b %d") +
  coord_cartesian(expand = 0) +
  labs(y = "Depth (m)") +
  theme(axis.title.x = element_blank()) +
  facet_grid(source ~ .)

rm(bin)

6.1.5 Select rho criterion

MLD <- tm_fm_gt_MLD %>%
  filter(rho_lim == parameters$rho_lim) %>%
  select(-rho_lim) %>%
  rename(i_dep = MLD) %>%
  mutate(i_method = "MLD", i_res = "daily")

rm(tm_fm_gt_MLD)

6.1.6 Mean MLD

# Filter data before temperature peak, and calculate mean
MLD_mean <- MLD %>%
  filter(date_time_ID <= date_tem_max) %>%
  group_by(source) %>%
  summarise(MLD_mean = mean(i_dep, na.rm = TRUE),
            MLD_sd = sd(i_dep, na.rm = TRUE)) %>%
  ungroup()

MLD_mean
# A tibble: 2 x 3
  source MLD_mean MLD_sd
  <chr>     <dbl>  <dbl>
1 fm          5.5   1.18
2 tm          6     1.87
# format mean MLD data frame
MLD_mean <- MLD_mean %>%
  select(-MLD_sd) %>% 
  rename(i_dep = MLD_mean) %>%
  mutate(i_method = "MLD", i_res = "mean")

MLD_dates <- MLD %>%
  select(source, date_time_ID)

MLD_mean <- full_join(MLD_dates, MLD_mean)
MLD <- full_join(MLD, MLD_mean)

rm(MLD_mean)

6.2 TPD

6.2.1 Cumulative changes

tm_fm_gt_long <- tm_fm_gt %>%
  select(-c(sal)) %>%
  pivot_longer(c("tem", "CT_star"),
               values_to = "value",
               names_to = "var") %>%
  group_by(source, var, dep) %>%
  arrange(date_time_ID) %>%
  mutate(
    date_time_ID_diff = as.numeric(date_time_ID - lag(date_time_ID)),
    value_diff = value - lag(value, default = first(value)),
    value_diff_daily = value_diff / date_time_ID_diff,
    value_cum = cumsum(value_diff)
  ) %>%
  ungroup()

# select only temperature data
tm_fm_gt_long <- tm_fm_gt_long %>%
  filter(var == "tem") %>%
  select(-var)

6.2.2 Temperature profiles

Please note that the cumulative temperature profile of GETM shows a deep maximum below 20m, which must be attributed to water mass exchange rather than surface warming to radiation or heat uptake, which we want to capture here. Therefore, the integration depth of the GETM data was manually restricted to 19m.

tm_fm_gt_long %>%
  filter(date_time_ID == date_CT_min) %>%
  arrange(dep) %>%
  ggplot(aes(value_cum, dep)) +
  geom_vline(xintercept = 0) +
  geom_hline(yintercept = parameters$getm_i_dep) +
  geom_point() +
  geom_path() +
  scale_y_reverse() +
  labs(x = "Cumulative tem change",
       title = as.Date(date_CT_min)) +
  theme(legend.position = "left") +
  facet_grid(. ~ source, scales = "free_x")
Profiles of cumulative temperature changes from the GETM model (label fm) and as measured in the field (label tm).

Profiles of cumulative temperature changes from the GETM model (label fm) and as measured in the field (label tm).

6.2.3 Cumulative TPD

# subset data at CT* minimum
tm_fm_gt_long_day <- tm_fm_gt_long %>%
  filter(date_time_ID == date_CT_min) %>%
  mutate(
    value_cum = if_else(value_cum < 0,
                        NaN, value_cum),
    value_cum = if_else(source == "fm" &
                          dep > parameters$getm_i_dep,
                        NaN, value_cum)
  )

# integrate cumulative changes
tm_fm_gt_long_day_dep <- tm_fm_gt_long_day %>%
  select(source, dep, value_cum) %>%
  group_by(source) %>%
  arrange(dep) %>%
  mutate(
    value_cum_i = sum(value_cum, na.rm = TRUE),
    value_cum_dep = cumsum(value_cum),
    value_cum_i_rel = value_cum_dep / value_cum_i * 100
  ) %>%
  ungroup()

# extract integrated cumulative value
value_cum <- tm_fm_gt_long_day_dep %>%
  group_by(source) %>%
  summarise(value_cum_i = mean(value_cum_i)) %>%
  ungroup()

# extract surface cumulative value
value_surface <- tm_fm_gt_long_day %>%
  select(source, dep, value_cum) %>%
  filter(dep < parameters$surface_dep) %>%
  group_by(source) %>%
  summarise(value_surface = mean(value_cum)) %>%
  ungroup()

# calculate TPD
TPD <- full_join(value_cum, value_surface)
TPD <- TPD %>%
  mutate(i_dep = value_cum_i / value_surface)

rm(value_cum, value_surface)
p_tm_fm_gt_long <- tm_fm_gt_long_day %>%
  arrange(dep) %>%
  ggplot(aes(value_cum, dep)) +
  geom_hline(aes(yintercept = parameters$i_dep_lim, col = "fixed\nintegration\ndepth")) +
  geom_hline(data = TPD, aes(yintercept = i_dep, col = "TPD\nestimate")) +
  geom_vline(xintercept = 0) +
  geom_point() +
  geom_path() +
  scale_y_reverse() +
  scale_color_brewer(palette = "Dark2", guide = FALSE) +
  labs(x = "Cumulative change") +
  theme(legend.position = "left") +
  facet_wrap(. ~ source, ncol = 1, scales = "free_x")

p_tm_fm_gt_long_rel <- tm_fm_gt_long_day_dep %>%
  ggplot(aes(value_cum_i_rel, dep)) +
  geom_hline(aes(yintercept = parameters$i_dep_lim, col = "fixed\nintegration\ndepth")) +
  geom_hline(data = TPD, aes(yintercept = i_dep, col = "TPD\nestimate")) +
  geom_vline(xintercept = 90) +
  geom_point() +
  geom_line() +
  scale_y_reverse(limits = c(25, 0)) +
  scale_color_brewer(palette = "Dark2", name = "") +
  scale_x_continuous(limits = c(0, NA)) +
  labs(x = "Relative contribution (%)") +
  facet_wrap(. ~ source, ncol = 1, scales = "free_x") +
  theme(axis.title.y = element_blank())

p_tm_fm_gt_long + p_tm_fm_gt_long_rel

rm(
  tm_fm_gt_long_day,
  tm_fm_gt_long_day_dep,
  p_tm_fm_gt_long,
  p_tm_fm_gt_long_rel
)

TPD_cum <- TPD

rm(TPD)

6.2.4 Incremental TPD

# incremental changes of surface values
diff_surface <- tm_fm_gt_long %>%
  filter(dep < parameters$surface_dep) %>%
  group_by(date_time_ID, source) %>%
  summarise(value_diff_surface = mean(value_diff, na.rm = TRUE)) %>%
  ungroup() %>%
  mutate(value_diff_surface = if_else(value_diff_surface < 0,
                                      NaN, value_diff_surface))

tm_fm_gt_long <- full_join(tm_fm_gt_long, diff_surface)
rm(diff_surface)

# calculate penetration depths
TPD <- tm_fm_gt_long %>%
  mutate(
    value_diff = if_else(value_diff < 0,
                         NaN, value_diff),
    value_diff = if_else(source == "fm" & dep > 19,
                         NaN, value_diff)
  ) %>%
  group_by(date_time_ID, source) %>%
  summarise(
    value_diff_int = sum(value_diff, na.rm = TRUE),
    value_diff_surface = mean(value_diff_surface, na.rm = TRUE)
  ) %>%
  ungroup() %>%
  mutate(i_dep = value_diff_int / value_diff_surface)

# calculate mean TPD across bloom period
TPD_mean <- TPD %>%
  filter(date_time_ID <= date_CT_min) %>%
  group_by(source) %>%
  summarise(i_dep_sd = sd(i_dep, na.rm = TRUE),
            i_dep = mean(i_dep, na.rm = TRUE)) %>%
  ungroup()

p_surface <- TPD %>%
  ggplot(aes(date_time_ID, value_diff_surface, col = source)) +
  geom_hline(yintercept = 0) +
  geom_line() +
  geom_point() +
  scale_y_reverse(name = "Change surface value") +
  scale_x_datetime(breaks = "week", date_labels = "%d %b") +
  scale_color_brewer(palette = "Set1", direction = -1) +
  theme(axis.title.x = element_blank(),
        legend.title = element_blank())

p_integrated <- TPD %>%
  ggplot(aes(date_time_ID, value_diff_int, col = source)) +
  geom_hline(yintercept = 0) +
  geom_line() +
  geom_point() +
  scale_y_reverse(name = "Change integrated value") +
  scale_x_datetime(breaks = "week", date_labels = "%d %b") +
  scale_color_brewer(palette = "Set1", direction = -1) +
  theme(axis.title.x = element_blank(),
        legend.title = element_blank())

p_TPD <- TPD %>%
  ggplot(aes(date_time_ID, i_dep, col = source)) +
  geom_hline(yintercept = 0) +
  geom_hline(data = TPD_mean,
             aes(
               yintercept = i_dep,
               col = source,
               linetype = "mean"
             )) +
  geom_line(aes(linetype = "cruise")) +
  geom_point() +
  scale_y_reverse(name = "Penetration depth (m)", breaks = seq(0, 20, 5)) +
  scale_x_datetime(breaks = "week", date_labels = "%d %b") +
  scale_color_brewer(palette = "Set1", direction = -1) +
  theme(axis.title.x = element_blank(),
        legend.title = element_blank())


p_surface + p_integrated + p_TPD +
  plot_layout(ncol = 1)

TPD_mean
# A tibble: 2 x 3
  source i_dep_sd i_dep
  <chr>     <dbl> <dbl>
1 fm         2.31  11.4
2 tm         2.46  12.3
rm(p_surface, p_integrated, p_TPD)

6.2.5 Join TPD estimates

TPD <- TPD %>%
  select(date_time_ID, source, i_dep) %>%
  mutate(i_method = "TPD", i_res = "daily") %>%
  filter(date_time_ID < date_tem_max) %>%
  mutate(i_dep = if_else(is.na(i_dep), 0, i_dep))

TPD_cum <- TPD_cum %>%
  select(source, i_dep) %>%
  mutate(i_method = "TPD", i_res = "cumulative")

TPD_cum <- full_join(MLD_dates, TPD_cum)

TPD_mean <- TPD_mean %>%
  select(source, i_dep) %>%
  mutate(i_method = "TPD", i_res = "mean")

TPD_mean <- full_join(MLD_dates, TPD_mean)

TPD <- full_join(TPD, TPD_cum)
TPD <- full_join(TPD, TPD_mean)

rm(TPD_cum, TPD_mean)

6.3 Join TPD and MLD

i_dep <- full_join(MLD, TPD)
rm(MLD, TPD)

6.4 Hovmoeller + MLD/TPD

bin <- 2

# prepare data sets
i_dep <- i_dep %>%
  mutate(source = factor(source, c("tm", "fm"))) %>%
  mutate(source = fct_recode(
    source,
    `SOOP Finnmaid + GETM model` = "fm",
    `SV Tina V (surface only)` = "tm"
  ))

tm_fm_gt <- tm_fm_gt %>%
  mutate(source = factor(source, c("tm", "fm"))) %>%
  mutate(source = fct_recode(
    source,
    `SOOP Finnmaid + GETM model` = "fm",
    `SV Tina V (surface only)` = "tm"
  ))

p_hov_dep <-
  tm_fm_gt %>%
  ggplot() +
  geom_contour_fill(aes(date_time_ID, dep, z = tem),
                    breaks = MakeBreaks(bin),
                    col = "black",
                    size = 0.1) +
  geom_path(data = i_dep %>% filter(i_res == "daily" & i_dep != 0),
            aes(date_time_ID, i_dep, col = i_method)) +
  scale_fill_gradient(
    name = "Temperature\n(\u00B0C)",
    guide = "colorstrip",
    breaks = MakeBreaks(bin),
    high = "grey90",
    low = "grey20"
  ) +
  guides(fill = guide_colorsteps(barheight = unit(35, "mm"),
                                 barwidth = unit(4, "mm"),
                                 frame.colour = "black",
                                 ticks = TRUE,
                                 ticks.colour = "black")) +
  scale_color_discrete(name = "Reconstruction", guide = FALSE) +
  scale_y_reverse() +
  scale_x_datetime(date_breaks = "week",
                   date_labels = "%b %d",
                   sec.axis = dup_axis()) +
  coord_cartesian(expand = 0) +
  labs(y = expression(atop(Depth, (m)))) +
  theme(
    axis.title.x = element_blank(),
    axis.text.x = element_blank(),
    strip.background = element_blank(),
    strip.text.x = element_blank(),
    axis.text.x.top = element_blank(),
    plot.margin = margin(0, 0, 0, 0, "cm")
  ) +
  facet_wrap( ~ source)

p_hov_dep

rm(bin)

7 Surface data + integr. depth

Here, we restrict all CT* observations to surface waters, and merge with the integrations depth estimates.

# calculate surface water time series
tm_fm_gt_surface <- tm_fm_gt %>%
  filter(dep < parameters$surface_dep) %>%
  select(source, date_time_ID, sensor, CT_star) %>%
  group_by(source, date_time_ID, sensor) %>%
  summarise(CT_star = mean(CT_star, na.rm = TRUE)) %>%
  ungroup()

# calculate incremental and cumulative changes
tm_fm_gt_surface <- tm_fm_gt_surface %>%
  group_by(source) %>%
  arrange(date_time_ID) %>%
  mutate(
    date_time_ID_diff = as.numeric(date_time_ID - lag(date_time_ID)),
    CT_star_diff = CT_star - lag(CT_star, default = first(CT_star)),
    CT_star_cum = cumsum(CT_star_diff)
  ) %>%
  ungroup()
iCT <- full_join(tm_fm_gt_surface, i_dep)
rm(tm_fm_gt_surface)

8 NCP reconstruction

8.1 Integration of CT*

Incremental depth-integrated changes of CT* are calculated as the product of incremental changes of surface CT* and the integration depth parameter.

# integrate incremental CT* changes across depth
iCT <- iCT %>% 
  mutate(CT_i_diff = CT_star_diff * i_dep)

# calculate cumulative changes
iCT <- iCT %>% 
  group_by(source, i_method, i_res) %>%
  arrange(date_time_ID) %>%
  mutate(CT_star_i_cum = cumsum(CT_i_diff/1000)) %>% 
  ungroup()

8.2 Read best-guess NCP

tm_NCP_cum <- read_csv(here::here("data/intermediate/_merged_data_files/NCP_best_guess",
                                  "tm_NCP_cum.csv"))

8.3 Adapt air sea flux

# prepare air sea flux data from best-guess approach
tm_NCP_cum_flux <- tm_NCP_cum %>%
  select(date_time, flux_cum)

tm_NCP_cum_flux <-
  expand_grid(
    tm_NCP_cum_flux,
    source = unique(iCT$source),
    i_method = unique(iCT$i_method),
    i_res = unique(iCT$i_res)
  )

NCP_flux <- full_join(iCT %>% rename(date_time = date_time_ID),
                      tm_NCP_cum_flux) %>%
  arrange(date_time)

# linear interpolation of cumulative changes to frequency of the flux estimates estimates
NCP_flux_int <- NCP_flux %>%
  filter(!(i_method == "MLD" & i_res == "cumulative")) %>%
  group_by(source, i_method, i_res) %>%
  mutate(
    CT_star_i_cum = approxfun(date_time, CT_star_i_cum)(date_time),
    flux_cum = approxfun(date_time, flux_cum)(date_time)
  ) %>%
  fill(flux_cum) %>%
  mutate(CT_star_i_flux_cum = CT_star_i_cum + flux_cum) %>%
  ungroup()

8.4 Time series

8.4.1 Without mixing corrrection

iCT <- iCT %>%
  mutate(sensor = if_else(sensor == "BloomSail", sensor, "VOS"))

p_CT_star <- iCT %>%
  ggplot() +
  geom_path(aes(date_time_ID, CT_star)) +
  geom_point(aes(date_time_ID, CT_star, fill = sensor), shape = 21) +
  scale_fill_manual(values = c("white", "black"),
                    guide = FALSE) +
  scale_x_datetime(breaks = "week",
                   date_labels = "%d %b",
                   expand = c(0, 0)) +
  facet_wrap( ~ source) +
  labs(y = expression(atop(paste(C[T], "*"), (mu * mol ~ kg ^ {
    -1
  })))) +
  theme(
    axis.title.x = element_blank(),
    axis.text.x = element_blank(),
    plot.margin = margin(0, 0, 0, 0, "cm")
  )

p_iCT <- iCT %>%
  ggplot() +
  geom_hline(yintercept = 0) +
  geom_path(data = tm_NCP_cum,
            aes(date_time, CT_star_i_cum),
            col = "black") +
  geom_path(aes(
    date_time_ID,
    CT_star_i_cum,
    col = i_method,
    linetype = i_res
  )) +
  scale_color_discrete(name = "Reconstruction") +
  scale_x_datetime(
    breaks = "week",
    date_labels = "%d %b",
    sec.axis = dup_axis(),
    expand = c(0, 0)
  ) +
  scale_linetype(name = "Resolution") +
  facet_wrap(~ source) +
  labs(y = expression(atop(Integrated ~ nC[T], (mol ~ m ^ {
    -2
  })))) +
  guides(color = guide_legend(order = 1)) +
  theme(
    axis.title.x = element_blank(),
    strip.background = element_blank(),
    strip.text.x = element_blank(),
    axis.text.x.top = element_blank()
  )

p_CT_star / p_hov_dep / p_iCT

8.4.2 With mixing corrrection

NCP_flux <- NCP_flux %>%
  mutate(i_res = factor(i_res, c("mean", "cumulative", "daily")))

p_NCP <- NCP_flux_int %>%
  filter(i_res %in% c("daily")) %>%
  ggplot() +
  geom_hline(yintercept = 0) +
  geom_path(
    data = tm_NCP_cum,
    aes(date_time, CT_star_i_flux_mix_cum, linetype = "best \U2013 guess"),
    col = "black"
  ) +
  geom_path(aes(
    date_time,
    CT_star_i_flux_cum,
    col = i_method,
    linetype = "reconstruction"
  )) +
  scale_color_discrete(name = "Integration depth") +
  scale_x_datetime(
    breaks = "week",
    date_labels = "%d %b",
    sec.axis = dup_axis(),
    expand = c(0, 0)
  ) +
  scale_linetype_manual(name = "NCP estimate",
                        values = c(2, 1)) +
  facet_wrap(~ source) +
  labs(y = expression(atop(NCP, (mol ~ m ^ {
    -2
  })))) +
  guides(color = guide_legend(order = 1)) +
  theme(
    axis.title.x = element_blank(),
    strip.background = element_blank(),
    strip.text.x = element_blank(),
    axis.text.x.top = element_blank(),
    plot.margin = margin(0, 0, 0, 0, "cm")
  )

p_CT_star / p_hov_dep / p_NCP +
  plot_annotation(tag_levels = 'a')

ggsave(
  here::here("output/Plots/Figures_publication/article",
             "Fig_6.pdf"),
  width = 160,
  height = 155,
  dpi = 300,
  units = "mm"
)

ggsave(
  here::here("output/Plots/Figures_publication/article",
             "Fig_6.png"),
  width = 160,
  height = 155,
  dpi = 300,
  units = "mm"
)

sessionInfo()
R version 4.0.3 (2020-10-10)
Platform: x86_64-w64-mingw32/x64 (64-bit)
Running under: Windows 10 x64 (build 18363)

Matrix products: default

locale:
[1] LC_COLLATE=English_Germany.1252  LC_CTYPE=English_Germany.1252   
[3] LC_MONETARY=English_Germany.1252 LC_NUMERIC=C                    
[5] LC_TIME=English_Germany.1252    

attached base packages:
[1] stats     graphics  grDevices utils     datasets  methods   base     

other attached packages:
 [1] metR_0.9.0        lubridate_1.7.9.2 patchwork_1.1.1   seacarb_3.2.14   
 [5] oce_1.2-0         gsw_1.0-5         testthat_3.0.1    ncdf4_1.17       
 [9] forcats_0.5.0     stringr_1.4.0     dplyr_1.0.2       purrr_0.3.4      
[13] readr_1.4.0       tidyr_1.1.2       tibble_3.0.4      ggplot2_3.3.3    
[17] tidyverse_1.3.0   workflowr_1.6.2  

loaded via a namespace (and not attached):
 [1] httr_1.4.2         jsonlite_1.7.2     viridisLite_0.3.0  here_1.0.1        
 [5] modelr_0.1.8       assertthat_0.2.1   highr_0.8          cellranger_1.1.0  
 [9] yaml_2.2.1         pillar_1.4.7       backports_1.2.1    glue_1.4.2        
[13] digest_0.6.27      RColorBrewer_1.1-2 promises_1.1.1     checkmate_2.0.0   
[17] rvest_0.3.6        colorspace_2.0-0   plyr_1.8.6         htmltools_0.5.0   
[21] httpuv_1.5.4       pkgconfig_2.0.3    broom_0.7.3        haven_2.3.1       
[25] scales_1.1.1       whisker_0.4        later_1.1.0.1      git2r_0.27.1      
[29] generics_0.1.0     farver_2.0.3       ellipsis_0.3.1     withr_2.3.0       
[33] cli_2.2.0          magrittr_2.0.1     crayon_1.3.4       readxl_1.3.1      
[37] evaluate_0.14      ps_1.5.0           fs_1.5.0           fansi_0.4.1       
[41] xml2_1.3.2         tools_4.0.3        data.table_1.13.6  hms_0.5.3         
[45] lifecycle_0.2.0    munsell_0.5.0      reprex_0.3.0       isoband_0.2.3     
[49] compiler_4.0.3     rlang_0.4.10       grid_4.0.3         rstudioapi_0.13   
[53] labeling_0.4.2     rmarkdown_2.6      gtable_0.3.0       DBI_1.1.0         
[57] R6_2.5.0           knitr_1.30         utf8_1.1.4         rprojroot_2.0.2   
[61] stringi_1.5.3      Rcpp_1.0.5         vctrs_0.3.6        dbplyr_2.0.0      
[65] tidyselect_1.1.0   xfun_0.19