Last updated: 2020-06-04
Checks: 7 0
Knit directory: STUtility_web_site/
This reproducible R Markdown analysis was created with workflowr (version 1.6.2). The Checks tab describes the reproducibility checks that were applied when the results were created. The Past versions tab lists the development history.
Great! Since the R Markdown file has been committed to the Git repository, you know the exact version of the code that produced these results.
Great job! The global environment was empty. Objects defined in the global environment can affect the analysis in your R Markdown file in unknown ways. For reproduciblity it’s best to always run the code in an empty environment.
The command set.seed(20191031) was run prior to running the code in the R Markdown file. Setting a seed ensures that any results that rely on randomness, e.g. subsampling or permutations, are reproducible.
Great job! Recording the operating system, R version, and package versions is critical for reproducibility.
Nice! There were no cached chunks for this analysis, so you can be confident that you successfully produced the results during this run.
Great job! Using relative paths to the files within your workflowr project makes it easier to run your code on other machines.
Great! You are using Git for version control. Tracking code development and connecting the code version to the results is critical for reproducibility.
The results in this page were generated with repository version 3660612. See the Past versions tab to see a history of the changes made to the R Markdown and HTML files.
Note that you need to be careful to ensure that all relevant files for the analysis have been committed to Git prior to generating the results (you can use wflow_publish or wflow_git_commit). workflowr only checks the R Markdown file, but you know if there are other scripts or data files that it depends on. Below is the status of the Git repository when the results were generated:
Ignored files:
Ignored: .DS_Store
Ignored: analysis/.DS_Store
Ignored: analysis/manual_annotation.png
Ignored: analysis/visualization_3D.Rmd
Untracked files:
Untracked: pre_data/
Unstaged changes:
Modified: analysis/Manual_annotation.Rmd
Note that any generated files, e.g. HTML, png, CSS, etc., are not included in this status report because it is ok for generated content to have uncommitted changes.
These are the previous versions of the repository in which changes were made to the R Markdown (analysis/installation.Rmd) and HTML (docs/installation.html) files. If you’ve configured a remote Git repository (see ?wflow_git_remote), click on the hyperlinks in the table below to view the files as they were in that past version.
| File | Version | Author | Date | Message |
|---|---|---|---|---|
| Rmd | 3660612 | Ludvig Larsson | 2020-06-04 | update website |
| html | c3ef213 | jbergenstrahle | 2020-01-16 | Build site. |
| Rmd | 78077ac | jbergenstrahle | 2020-01-16 | Added installation info regarding bioconductor packages |
| html | fb06450 | jbergenstrahle | 2020-01-11 | Build site. |
| Rmd | baff98e | jbergenstrahle | 2019-12-16 | adding |
| Rmd | 5cb8ab1 | jbergenstrahle | 2019-12-02 | update2 |
| Rmd | 8f9876e | jbergenstrahle | 2019-11-29 | Update |
| Rmd | 03c9b7c | jbergenstrahle | 2019-11-19 | Added JB |
| html | 03c9b7c | jbergenstrahle | 2019-11-19 | Added JB |
| html | be8be1d | Ludvig Larsson | 2019-10-31 | Build site. |
| html | f42af97 | Ludvig Larsson | 2019-10-31 | Build site. |
| html | 0754921 | Ludvig Larsson | 2019-10-31 | Build site. |
| html | 908fe2c | Ludvig Larsson | 2019-10-31 | Build site. |
| html | 54787b5 | Ludvig Larsson | 2019-10-31 | Build site. |
| html | d96da86 | Ludvig Larsson | 2019-10-31 | Build site. |
| html | 7a20e6c | Ludvig Larsson | 2019-10-31 | Build site. |
| Rmd | 19ba86c | Ludvig Larsson | 2019-10-31 | Added theme |
| html | a3cff7a | Ludvig Larsson | 2019-10-31 | Build site. |
| Rmd | ec49ddf | Ludvig Larsson | 2019-10-31 | Added theme |
| html | 1a8c056 | Ludvig Larsson | 2019-10-31 | Build site. |
| html | a53305c | Ludvig Larsson | 2019-10-31 | Build site. |
| html | 6f61b95 | Ludvig Larsson | 2019-10-31 | Build site. |
| Rmd | 429c12c | Ludvig Larsson | 2019-10-31 | Publish the initial files for myproject |
| html | f0363a2 | Ludvig Larsson | 2019-10-31 | Build site. |
| Rmd | fab503b | Ludvig Larsson | 2019-10-31 | Publish the initial files for myproject |
| html | 41209f8 | Ludvig Larsson | 2019-10-31 | Build site. |
| html | d778f61 | Ludvig Larsson | 2019-10-31 | Build site. |
| Rmd | 77ea122 | Ludvig Larsson | 2019-10-31 | Publish the initial files for myproject |
STUtility requires R version >=3.6 and two packages (SingleCellExperiment and multtest) within the Bioconductor suit needs to be installed prior to installing STUtility from github:
If you don’t have bioconductor installed:
if (!requireNamespace("BiocManager", quietly = TRUE))
install.packages("BiocManager")
BiocManager::install()BiocManager::install("SingleCellExperiment")
BiocManager::install("multtest")To install STUtility from github (currently only option), you need to have devtools and the NNLM R package installed:
install.packages("devtools")
devtools::install_hithub("linxihui/NNLM")Using devtools, execute the following from the R console to install STUtility:
devtools::install_github(
"jbergenstrahle/STUtility"
)If you run into Error in dyn.load(file, DLLpath = DLLpath, ...):, make sure you have XQuartz installed, which can be downloaded from xquartz.org
A work by Joseph Bergenstråhle and Ludvig Larsson
sessionInfo()R version 4.0.0 (2020-04-24)
Platform: x86_64-apple-darwin17.0 (64-bit)
Running under: macOS Mojave 10.14.6
Matrix products: default
BLAS: /Library/Frameworks/R.framework/Versions/4.0/Resources/lib/libRblas.dylib
LAPACK: /Library/Frameworks/R.framework/Versions/4.0/Resources/lib/libRlapack.dylib
locale:
[1] en_US.UTF-8/en_US.UTF-8/en_US.UTF-8/C/en_US.UTF-8/en_US.UTF-8
attached base packages:
[1] stats graphics grDevices utils datasets methods base
other attached packages:
[1] workflowr_1.6.2
loaded via a namespace (and not attached):
[1] Rcpp_1.0.4.6 rprojroot_1.3-2 digest_0.6.25 later_1.0.0
[5] R6_2.4.1 backports_1.1.6 git2r_0.27.1 magrittr_1.5
[9] evaluate_0.14 stringi_1.4.6 rlang_0.4.6 fs_1.4.1
[13] promises_1.1.0 whisker_0.4 rmarkdown_2.1 tools_4.0.0
[17] stringr_1.4.0 glue_1.4.0 httpuv_1.5.2 xfun_0.13
[21] yaml_2.2.1 compiler_4.0.0 htmltools_0.4.0 knitr_1.28