Last updated: 2021-05-10

Checks: 7 0

Knit directory: BloomSail/

This reproducible R Markdown analysis was created with workflowr (version 1.6.2). The Checks tab describes the reproducibility checks that were applied when the results were created. The Past versions tab lists the development history.


Great! Since the R Markdown file has been committed to the Git repository, you know the exact version of the code that produced these results.

Great job! The global environment was empty. Objects defined in the global environment can affect the analysis in your R Markdown file in unknown ways. For reproduciblity it’s best to always run the code in an empty environment.

The command set.seed(20191021) was run prior to running the code in the R Markdown file. Setting a seed ensures that any results that rely on randomness, e.g. subsampling or permutations, are reproducible.

Great job! Recording the operating system, R version, and package versions is critical for reproducibility.

Nice! There were no cached chunks for this analysis, so you can be confident that you successfully produced the results during this run.

Great job! Using relative paths to the files within your workflowr project makes it easier to run your code on other machines.

Great! You are using Git for version control. Tracking code development and connecting the code version to the results is critical for reproducibility.

The results in this page were generated with repository version ac739b8. See the Past versions tab to see a history of the changes made to the R Markdown and HTML files.

Note that you need to be careful to ensure that all relevant files for the analysis have been committed to Git prior to generating the results (you can use wflow_publish or wflow_git_commit). workflowr only checks the R Markdown file, but you know if there are other scripts or data files that it depends on. Below is the status of the Git repository when the results were generated:


Ignored files:
    Ignored:    .Rhistory
    Ignored:    .Rproj.user/
    Ignored:    data/
    Ignored:    output/Plots/Figures_publication/.tmp.drivedownload/

Untracked files:
    Untracked:  data_os-2020-120_submission.zip

Unstaged changes:
    Modified:   code/Workflowr_project_managment.R
    Modified:   output/Plots/Figures_publication/Appendix/Fig_B2.pdf
    Modified:   output/Plots/Figures_publication/Appendix/Fig_B2.png

Note that any generated files, e.g. HTML, png, CSS, etc., are not included in this status report because it is ok for generated content to have uncommitted changes.


These are the previous versions of the repository in which changes were made to the R Markdown (analysis/merging_interpolation.Rmd) and HTML (docs/merging_interpolation.html) files. If you’ve configured a remote Git repository (see ?wflow_git_remote), click on the hyperlinks in the table below to view the files as they were in that past version.

File Version Author Date Message
html 61e452c jens-daniel-mueller 2021-04-16 Build site.
html 5f4fb9a jens-daniel-mueller 2021-02-20 Build site.
html 516b294 jens-daniel-mueller 2021-02-18 Build site.
html 70a8950 jens-daniel-mueller 2021-02-11 Build site.
html acba234 jens-daniel-mueller 2021-02-11 Build site.
Rmd 6d46720 jens-daniel-mueller 2021-02-11 cleaning
html d4ce04c jens-daniel-mueller 2021-02-11 Build site.
Rmd 0d87752 jens-daniel-mueller 2021-02-11 cleaning
html 4dfc4f8 jens-daniel-mueller 2021-02-11 Build site.
Rmd 8dc3356 jens-daniel-mueller 2021-02-11 cleaning
html 58c044c jens-daniel-mueller 2021-02-11 Build site.
Rmd fbe6ede jens-daniel-mueller 2021-02-11 cleaning
html 9544a3e jens-daniel-mueller 2021-02-11 Build site.
Rmd 775bef9 jens-daniel-mueller 2021-02-11 cleaning
html c0efe17 jens-daniel-mueller 2021-02-11 Build site.
Rmd 28f059f jens-daniel-mueller 2021-02-11 cleaning
html 1fe2dce jens-daniel-mueller 2021-02-11 Build site.
Rmd 4f7b259 jens-daniel-mueller 2021-02-11 cleaning
html 8e5e6d9 jens-daniel-mueller 2021-02-11 Build site.
Rmd 40f9a07 jens-daniel-mueller 2021-02-11 cleaning
html 8051798 jens-daniel-mueller 2021-02-10 Build site.
html c5fc34c jens-daniel-mueller 2021-01-22 Build site.
html 4277235 jens-daniel-mueller 2021-01-05 Build site.
html 9a3f42a jens-daniel-mueller 2020-10-24 Build site.
html 05248bf jens-daniel-mueller 2020-10-20 Build site.
html 1c4fe8e jens-daniel-mueller 2020-10-20 table with time series in depth intervals added
html 9e2ff85 jens-daniel-mueller 2020-10-13 Build site.
Rmd ff85457 jens-daniel-mueller 2020-10-13 removed various Contros correction plots
html 75d03b5 jens-daniel-mueller 2020-10-13 Build site.
Rmd 439d733 jens-daniel-mueller 2020-10-13 removed various Contros correction plots
html 6896725 jens-daniel-mueller 2020-10-01 Build site.
html 9f66019 jens-daniel-mueller 2020-10-01 Build site.
html 27c5431 jens-daniel-mueller 2020-09-29 Build site.
Rmd 2e0f902 jens-daniel-mueller 2020-09-29 all parameters separate, rebuild
html 1d01685 jens-daniel-mueller 2020-09-28 Build site.
Rmd d28129f jens-daniel-mueller 2020-09-28 republish after tau factor set to 1 and using final pCO2 data
html 4cfc1ad jens-daniel-mueller 2020-09-25 Build site.
Rmd 0e92cf9 jens-daniel-mueller 2020-09-25 enabled chunks for merging and saving
html 02a1609 jens-daniel-mueller 2020-09-25 Build site.
Rmd 99e69cf jens-daniel-mueller 2020-09-25 activated read-in of th and ts data
html 16554bc jens-daniel-mueller 2020-09-25 Build site.
Rmd 75e8c80 jens-daniel-mueller 2020-09-25 plot with 10% sample size
html 616c27f jens-daniel-mueller 2020-09-25 updated repo manually
Rmd 118f99e jens-daniel-mueller 2020-09-25 comparison of pCO2 data included
html 264566c jens-daniel-mueller 2020-09-25 Build site.
Rmd abc5bac jens-daniel-mueller 2020-09-25 comparison of pCO2 data included
html 904f0f7 jens-daniel-mueller 2020-09-23 Build site.
Rmd 7f497e4 jens-daniel-mueller 2020-09-23 updated tau lm fit procedure
html 8951791 jens-daniel-mueller 2020-09-23 Build site.
Rmd 9e87621 jens-daniel-mueller 2020-09-23 included postprocessed cleaned data
html ddd2d3e jens-daniel-mueller 2020-09-23 Build site.
Rmd 3ad71b0 jens-daniel-mueller 2020-09-23 included postprocessed cleaned data
html aea9be2 jens-daniel-mueller 2020-09-23 Build site.
Rmd ed17078 jens-daniel-mueller 2020-09-23 included postprocessed cleaned data
html 66bf52a jens-daniel-mueller 2020-09-23 Build site.
Rmd 0c8eed6 jens-daniel-mueller 2020-09-23 included postprocessed cleaned data
html c919fb7 jens-daniel-mueller 2020-06-29 Build site.
Rmd 1461cb6 jens-daniel-mueller 2020-06-29 Fig update for talk
html 603af23 jens-daniel-mueller 2020-05-25 Build site.
html 3414c23 jens-daniel-mueller 2020-05-25 Build site.
html 772e588 jens-daniel-mueller 2020-05-04 Build site.
Rmd 2ab39d7 jens-daniel-mueller 2020-05-04 All profiles and timeseries in one plot pdf
html 1ae50d3 jens-daniel-mueller 2020-05-04 Build site.
Rmd e78c435 jens-daniel-mueller 2020-05-04 finalized time sync check
html f95bf94 jens-daniel-mueller 2020-05-04 Build site.
Rmd 56f6c8a jens-daniel-mueller 2020-05-04 corrected dep_maxgap removel criterion
html c23350e jens-daniel-mueller 2020-05-04 Build site.
Rmd 3067532 jens-daniel-mueller 2020-05-04 revise time sync
html 3832733 jens-daniel-mueller 2020-04-30 Build site.
Rmd 4f4ab08 jens-daniel-mueller 2020-04-30 harmonized code until RT determination
html 6465570 jens-daniel-mueller 2020-04-29 Build site.
Rmd 0bbf0e6 jens-daniel-mueller 2020-04-29 revised nomenclature
html ebd1948 jens-daniel-mueller 2020-04-29 Build site.
Rmd 52090bf jens-daniel-mueller 2020-04-29 correct interpolation, new d pco2 plot range
html d9248a6 jens-daniel-mueller 2020-04-29 Build site.
Rmd 70bd3f0 jens-daniel-mueller 2020-04-29 correct interpolation, new d pco2 plot
html b5722a7 jens-daniel-mueller 2020-04-28 Build site.
html 472c2b4 jens-daniel-mueller 2020-04-21 Build site.
html f8fcf50 jens-daniel-mueller 2020-04-19 created pub figures for time series
html a6c4c22 jens-daniel-mueller 2020-03-30 Build site.
html 80c78b3 jens-daniel-mueller 2020-03-30 Build site.
html 5f8ca30 jens-daniel-mueller 2020-03-20 Build site.
html 2a20453 jens-daniel-mueller 2020-03-20 Build site.
html 473ab25 jens-daniel-mueller 2020-03-19 Build site.
html 81f022e jens-daniel-mueller 2020-03-18 Build site.
html 1e39d85 jens-daniel-mueller 2020-03-18 Build site.
html 2105236 jens-daniel-mueller 2020-03-18 Build site.
html 05b9bdc jens-daniel-mueller 2020-03-17 Build site.
html 0202742 jens-daniel-mueller 2020-03-16 Build site.
html 8e83afd jens-daniel-mueller 2020-03-12 Build site.
html a3ddea4 jens-daniel-mueller 2020-03-12 Build site.
html 52621ea jens-daniel-mueller 2020-03-12 Build site.
html e43a6f2 jens-daniel-mueller 2019-12-19 Build site.
html 3042ff3 jens-daniel-mueller 2019-12-19 Build site.
Rmd 282c3ac jens-daniel-mueller 2019-12-19 whole data set RT corrected
html 78710ee jens-daniel-mueller 2019-12-09 Build site.
Rmd c6cfca5 jens-daniel-mueller 2019-12-09 RT correction incl OGB data
html c6cfca5 jens-daniel-mueller 2019-12-09 RT correction incl OGB data
html bc6f19b jens-daniel-mueller 2019-11-22 Build site.
Rmd 03b1b97 jens-daniel-mueller 2019-11-22 updated RT determination
html 874dac5 jens-daniel-mueller 2019-11-22 Build site.
Rmd f875795 jens-daniel-mueller 2019-11-22 now clean
html d921065 jens-daniel-mueller 2019-11-14 Build site.
Rmd 252f84d jens-daniel-mueller 2019-11-14 included EDA in data base
html d61a468 jens-daniel-mueller 2019-11-14 Build site.
html f3277a5 jens-daniel-mueller 2019-11-08 Build site.
html 4256bcf jens-daniel-mueller 2019-11-08 Build site.
html 72687ee jens-daniel-mueller 2019-11-08 Build site.
html 74212a6 jens-daniel-mueller 2019-11-08 Build site.
Rmd 6cb1935 jens-daniel-mueller 2019-11-08 response_time updated
html 33e3659 jens-daniel-mueller 2019-10-22 Build site.
Rmd efcafd1 jens-daniel-mueller 2019-10-22 Added data base, merging, and RT determination
html 1595fe9 jens-daniel-mueller 2019-10-21 Build site.
Rmd 4131b9c jens-daniel-mueller 2019-10-21 finisehd read CTD and HydroC, created merging Rmd

library(tidyverse)
library(lubridate)
library(zoo)

1 Scope of this script

  • merge CTD, pCO2 and track data
  • interpolate to common time stamp
  • compare pCO2 from different source files

2 CTD (ts) + HydroC CO2 data (th, V1)

2.1 Merging summarized data sets

Before merging the ts and th data set, the time stamp of ts is adjusted to match exactly that of th, based on zeroing pCO2 values recorded in the analog output (ts) and the internal memory (th).

The th data set used here, is V1 of the post-processed data by KM Contros.

# Load Sensor and HydroC data ---------------------------------------------
ts <- read_csv(here::here("data/intermediate/_summarized_data_files",
                          "ts.csv"),
               col_types = list("pCO2_analog" = col_double()))

th <- read_csv(here::here("data/intermediate/_summarized_data_files",
                          "th.csv"))

# Time offset correction ----------------------------------------------

# Time offset was determined by comparing zeroing reads from Sensor and th
# in the plots produced in the section Time stamp synchronicity below
# before applying this correction

ts <- ts %>% 
  mutate(day = yday(date_time),
         date_time = if_else(day >= 206 & day <= 220,
                             date_time - 80, date_time - 10)) %>% 
  select(-day)

# Merge Sensor and HydroC data --------------------------------------------

ts_th <- full_join(ts, th) %>% 
  arrange(date_time)

rm(th, ts)

A pdf with plots of the zeroing signals to check the time stamp syncronicity, can be found here:

Link to zeroing plots

2.2 Interpolation to common time stamp

CTD (ts) and auxillary recordings (15 sec measurment interval) are interpolated to the HydroC (th) time stamps (first 10 sec, than 1 sec measurement interval). Interpolation of ts data is not done when gaps between observations are larger than 20, indicating that th was running without ts, eg during data download from th. Thereafter, th readings not falling in regular transects/profilings are removed, by removing rows with NA depth values. Furthermore, ts readings without corresponding th readings are removed, except during periods when th was not operating.

# Interpolate Sensor data to HydroC time stamp

ts_th <- ts_th %>%
  mutate(
    dep_maxgap = na.approx(dep, na.rm = FALSE, maxgap = 20),
    dep = approxfun(date_time, dep)(date_time),
    sal = approxfun(date_time, sal)(date_time),
    tem = approxfun(date_time, tem)(date_time),
    pCO2_analog = approxfun(date_time, pCO2_analog)(date_time)
  ) %>%
  #remove HC readings not falling in regular transects/profiling
  filter(!is.na(dep_maxgap)) %>% 
  select(-dep_maxgap) %>%
  fill(ID, type, station) %>%
  # removes CTD readings without corresponding HydroC reading
  filter(!is.na(deployment),!is.na(pCO2_analog))
# Time stamp synchronicity

ts_th_Zero <- ts_th %>%
  filter(Zero == 1 | Flush == 1 & duration < 120)

pdf(
  file = here::here(
    "output/Plots/merging_interpolation",
    "Zero_time_synchronization.pdf"
  ),
  onefile = TRUE,
  width = 5,
  height = 5
)

for (i_deployment in unique(ts_th$deployment)) {
  #i_deployment <- unique(ts_th_Zero$deployment)[1]
  
  ts_th_Zero_deployment <- ts_th_Zero %>%
    filter(deployment == i_deployment)
  
  for (i_Zero_counter in unique(ts_th_Zero_deployment$Zero_counter)) {
    #i_Zero_counter <- unique(ts_th_Zero_deployment$Zero_counter)[1]
    
    print(
      ts_th_Zero_deployment %>%
        filter(Zero_counter == i_Zero_counter) %>%
        ggplot() +
        geom_point(aes(date_time, pCO2_corr, col = "HydroC")) +
        geom_point(aes(date_time, pCO2_analog, col = "analog")) +
        labs(
          title = paste("Depl: ", i_deployment,
                        " | Zero_counter: ", i_Zero_counter)
        )
      
    )
    
  }
}

dev.off()

rm(ts_th_Zero,
   ts_th_Zero_deployment,
   i_deployment,
   i_Zero_counter)

2.3 Read cleaned, processed pCO2 data (V2)

A revised post-processed HydroC pCO2 data set was provided by KM Contros after applying a drift correction to the cleaned raw data, i.e. those without data recorded during configuration and testing of the sensor. This data set is referred to as V2. The post-processing was still based on pre- and post-deployment calibration results.

# Read Contros corrected data file, based on cleaned recordings and
# without water vapor correction

th_new_withoutAW_all <-
  read_csv2(
    here::here(
      "data/input/TinaV/Sensor/HydroC-pCO2/corrected_Contros",
      "parameter&pCO2s(method 43)_new_withoutAW.txt"
    ),
    col_names = c(
      "date_time",
      "Zero",
      "Flush",
      "p_NDIR",
      "p_in",
      "T_control",
      "T_gas",
      "%rH_gas",
      "Signal_raw",
      "Signal_ref",
      "T_sensor",
      "pCO2_corr",
      "Runtime",
      "nr.ave"
    )
  ) %>%
  mutate(
    date_time = dmy_hms(date_time),
    Flush = as.factor(as.character(Flush)),
    Zero = as.factor(as.character(Zero))
  )

# slive every 10th data point to reduce number for plotting
th_new_withoutAW <- th_new_withoutAW_all %>%
  slice(seq(1, n(), 10))

# load analog pCO2 data (raw)
th_pre_cleaning <-
  read_csv(here::here(
    "data/intermediate/_summarized_data_files",
    "th_pre_cleaning.csv"
  ))

# slive every 10th data point to reduce number for plotting
th_pre_cleaning <- th_pre_cleaning %>%
  slice(seq(1, n(), 10))


# slive every 10th data point to reduce number for plotting
ts_th_sub <- ts_th %>%
  slice(seq(1, n(), 10))

2.3.1 Comparison of pCO2 time series

2.3.1.1 Analog vs internal

Below, pCO2 time series for the analog output and the post-processed (ie drift corrected) data V1 are shown.

ggplot() +
  geom_path(data = ts_th_sub,
            aes(date_time, pCO2_corr, col = "HydroC V1")) +
  geom_path(data = ts_th_sub,
            aes(date_time, pCO2_analog, col = "analog CTD")) +
  scale_color_brewer(palette = "Set1", name = "pCO2 record") +
  coord_cartesian(ylim = c(0, 600)) +
  labs(y = expression(pCO[2] ~ (µatm)), x = "") +
  facet_wrap(~ deployment, scales = "free_x", ncol = 1)
pCO~2~ record after interpolation to HydroC timestamp (analog output from HydroC recorded with CTD and drift corrected HydroC data V1 provided by Contos). ID refers to the starting date of each cruise. Please note that measurement range of the analog signal is technically restricted to 100-500  µatm. Zeroing periods are included.

pCO2 record after interpolation to HydroC timestamp (analog output from HydroC recorded with CTD and drift corrected HydroC data V1 provided by Contos). ID refers to the starting date of each cruise. Please note that measurement range of the analog signal is technically restricted to 100-500 µatm. Zeroing periods are included.

2.3.1.2 Internal V1 vs. V2

Below, pCO2 time series for the post-processed (ie drift corrected) data V1 and V2 are shown.

th_comparison <- full_join(
  ts_th_sub %>% select(date_time, deployment, pCO2_corr),
  th_new_withAW %>% select(date_time, pCO2_corr) %>% rename(pCO2_withAW = pCO2_corr)
)

th_comparison <- full_join(
  th_comparison,
  th_new_withoutAW %>% select(date_time, pCO2_corr) %>% rename(pCO2_withoutAW = pCO2_corr)
)

th_comparison %>%
  ggplot() +
  geom_path(aes(date_time, pCO2_corr, col = "V1")) +
  geom_path(aes(date_time, pCO2_withoutAW, col = "V2")) +
  scale_color_brewer(palette = "Set1", name = "HydroC pCO2 (th)") +
  coord_cartesian(ylim = c(0, 600)) +
  labs(y = expression(pCO[2] ~ (µatm)), x = "") +
  facet_wrap( ~ deployment, scales = "free_x", ncol = 1)

2.3.2 Replace pCO2 data

The pCO2 data V1 are replaced with V2, in the data set that will be used for further analysis.

th_new_withoutAW_all <- th_new_withoutAW_all %>% 
  select(date_time, pCO2_corr)

ts_th <- ts_th %>% 
  select(-pCO2_corr)

ts_th <- full_join(ts_th, th_new_withoutAW_all) 

rm(th_new_withoutAW_all)

2.3.3 Offset analog vs post-processed pCO2 (V2)

Below, the offset pCO2 time series between the analog output and the post-processed (ie drift corrected) data V2 are shown, which allows to judge the magnitude of the drift correction applied to V2.

ts_th %>%
  ggplot() +
  geom_path(aes(date_time, pCO2_corr - pCO2_analog)) +
  ylim(-30, 0) +
  labs(y = expression(pCO[2] ~ (µats_th)), x = "") +
  facet_wrap( ~ deployment, scales = "free_x", ncol = 1)
pCO~2~ difference between analog and drift corrected data provided by Contos. Please note that pCO2 range is restricted to 0 - 30 µatm.

pCO2 difference between analog and drift corrected data provided by Contos. Please note that pCO2 range is restricted to 0 - 30 µatm.

3 Merge sensor (ts_th) + track (tt) data

tt <- read_csv(here::here("data/intermediate/_summarized_data_files",
                          "tt.csv"))


tm <- full_join(ts_th, tt) %>% 
  arrange(date_time)

# interpolate tt data and than remove columns that originate from tt time stamp
tm <- tm %>%
  mutate(lat = approxfun(date_time, lat)(date_time),
         lon = approxfun(date_time, lon)(date_time)) %>% 
  filter(!is.na(dep))

4 Write merged file

tm %>% write_csv(here::here("data/intermediate/_merged_data_files/merging_interpolation",
                            "tm.csv"))

rm(tm, ts_th, tt)

sessionInfo()
R version 4.0.3 (2020-10-10)
Platform: x86_64-w64-mingw32/x64 (64-bit)
Running under: Windows 10 x64 (build 19042)

Matrix products: default

locale:
[1] LC_COLLATE=English_Germany.1252  LC_CTYPE=English_Germany.1252   
[3] LC_MONETARY=English_Germany.1252 LC_NUMERIC=C                    
[5] LC_TIME=English_Germany.1252    

attached base packages:
[1] stats     graphics  grDevices utils     datasets  methods   base     

other attached packages:
 [1] zoo_1.8-8         lubridate_1.7.9.2 forcats_0.5.0     stringr_1.4.0    
 [5] dplyr_1.0.2       purrr_0.3.4       readr_1.4.0       tidyr_1.1.2      
 [9] tibble_3.0.4      ggplot2_3.3.3     tidyverse_1.3.0   workflowr_1.6.2  

loaded via a namespace (and not attached):
 [1] Rcpp_1.0.5         here_1.0.1         lattice_0.20-41    ps_1.5.0          
 [5] assertthat_0.2.1   rprojroot_2.0.2    digest_0.6.27      R6_2.5.0          
 [9] cellranger_1.1.0   backports_1.2.1    reprex_0.3.0       evaluate_0.14     
[13] highr_0.8          httr_1.4.2         pillar_1.4.7       rlang_0.4.10      
[17] readxl_1.3.1       rstudioapi_0.13    whisker_0.4        rmarkdown_2.6     
[21] labeling_0.4.2     munsell_0.5.0      broom_0.7.5        compiler_4.0.3    
[25] httpuv_1.5.4       modelr_0.1.8       xfun_0.19          pkgconfig_2.0.3   
[29] htmltools_0.5.0    tidyselect_1.1.0   fansi_0.4.1        crayon_1.3.4      
[33] dbplyr_2.0.0       withr_2.3.0        later_1.1.0.1      grid_4.0.3        
[37] jsonlite_1.7.2     gtable_0.3.0       lifecycle_0.2.0    DBI_1.1.0         
[41] git2r_0.27.1       magrittr_2.0.1     scales_1.1.1       cli_2.2.0         
[45] stringi_1.5.3      farver_2.0.3       fs_1.5.0           promises_1.1.1    
[49] xml2_1.3.2         ellipsis_0.3.1     generics_0.1.0     vctrs_0.3.6       
[53] RColorBrewer_1.1-2 tools_4.0.3        glue_1.4.2         hms_0.5.3         
[57] yaml_2.2.1         colorspace_2.0-0   rvest_0.3.6        knitr_1.30        
[61] haven_2.3.1