Last updated: 2021-01-12

Checks: 7 0

Knit directory: social_immunity/

This reproducible R Markdown analysis was created with workflowr (version 1.6.2). The Checks tab describes the reproducibility checks that were applied when the results were created. The Past versions tab lists the development history.


Great! Since the R Markdown file has been committed to the Git repository, you know the exact version of the code that produced these results.

Great job! The global environment was empty. Objects defined in the global environment can affect the analysis in your R Markdown file in unknown ways. For reproduciblity it’s best to always run the code in an empty environment.

The command set.seed(20191017) was run prior to running the code in the R Markdown file. Setting a seed ensures that any results that rely on randomness, e.g. subsampling or permutations, are reproducible.

Great job! Recording the operating system, R version, and package versions is critical for reproducibility.

Nice! There were no cached chunks for this analysis, so you can be confident that you successfully produced the results during this run.

Great job! Using relative paths to the files within your workflowr project makes it easier to run your code on other machines.

Great! You are using Git for version control. Tracking code development and connecting the code version to the results is critical for reproducibility.

The results in this page were generated with repository version 62a950c. See the Past versions tab to see a history of the changes made to the R Markdown and HTML files.

Note that you need to be careful to ensure that all relevant files for the analysis have been committed to Git prior to generating the results (you can use wflow_publish or wflow_git_commit). workflowr only checks the R Markdown file, but you know if there are other scripts or data files that it depends on. Below is the status of the Git repository when the results were generated:


Ignored files:
    Ignored:    .DS_Store
    Ignored:    .Rhistory
    Ignored:    .Rproj.user/
    Ignored:    code/notes from old analysis of movement.R
    Ignored:    data/.DS_Store
    Ignored:    data/movement data - not used/
    Ignored:    output/exp1_model.rds
    Ignored:    output/exp2_model.rds
    Ignored:    output/exp3_model.rds

Unstaged changes:
    Modified:   figures/fig1.pdf
    Modified:   figures/fig2.pdf
    Modified:   figures/fig3.pdf
    Modified:   figures/tableS1.rds
    Modified:   figures/tableS2.rds
    Modified:   figures/tableS3.rds
    Modified:   figures/tableS4.rds
    Modified:   figures/tableS5.rds
    Modified:   figures/tableS6.rds

Note that any generated files, e.g. HTML, png, CSS, etc., are not included in this status report because it is ok for generated content to have uncommitted changes.


These are the previous versions of the repository in which changes were made to the R Markdown (analysis/experiment1.Rmd) and HTML (docs/experiment1.html) files. If you’ve configured a remote Git repository (see ?wflow_git_remote), click on the hyperlinks in the table below to view the files as they were in that past version.

File Version Author Date Message
Rmd 62a950c lukeholman 2021-01-12 mostly ready
html 9ebe5df lukeholman 2021-01-12 Build site.
Rmd 9c79d22 lukeholman 2021-01-12 mostly ready
html a9799c8 lukeholman 2021-01-11 Build site.
Rmd 36cb008 lukeholman 2021-01-11 wflow_publish(“analysis/experiment1.Rmd”, republish = TRUE)
html 939ecd0 lukeholman 2021-01-11 Build site.
Rmd 78386bb lukeholman 2021-01-11 tweaks 2021
html eeb5a09 lukeholman 2020-11-30 Build site.
Rmd 7aa69df lukeholman 2020-11-30 Added simple models
html e96fff4 lukeholman 2020-08-21 Build site.
Rmd 6fbe4a8 lukeholman 2020-08-21 Resize figure
html 7131f65 lukeholman 2020-08-21 Build site.
Rmd c80c978 lukeholman 2020-08-21 Fix summarise() warnings
html 4f23e70 lukeholman 2020-08-21 Build site.
Rmd c5c8df4 lukeholman 2020-08-21 Minor fixes
html 1bea769 lukeholman 2020-08-21 Build site.
Rmd d1dade3 lukeholman 2020-08-21 added supp material
html 6ee79e9 lukeholman 2020-08-21 Build site.
Rmd 7ec6dde lukeholman 2020-08-21 remake before submission
html 7bf607f lukeholman 2020-05-02 Build site.
Rmd 83fa522 lukeholman 2020-05-02 tweaks
html 3df58c2 lukeholman 2020-05-02 Build site.
html 2994a41 lukeholman 2020-05-02 Build site.
Rmd 9124fb8 lukeholman 2020-05-02 added Git button
html d166566 lukeholman 2020-05-02 Build site.
html fedef8f lukeholman 2020-05-02 Build site.
html 4cb9bc1 lukeholman 2020-05-02 Build site.
Rmd 14377be lukeholman 2020-05-02 tweak colours
html 14377be lukeholman 2020-05-02 tweak colours
html fa8c179 lukeholman 2020-05-02 Build site.
Rmd f188968 lukeholman 2020-05-02 tweak colours
html 2227713 lukeholman 2020-05-02 Build site.
Rmd f97baee lukeholman 2020-05-02 Lots of formatting changes
html f97baee lukeholman 2020-05-02 Lots of formatting changes
html 1c9a1c3 lukeholman 2020-05-02 Build site.
Rmd 3d21d6a lukeholman 2020-05-02 wflow_publish("*", republish = T)
html 3d21d6a lukeholman 2020-05-02 wflow_publish("*", republish = T)
html 93c487a lukeholman 2020-04-30 Build site.
html 5c45197 lukeholman 2020-04-30 Build site.
html 4bd75dc lukeholman 2020-04-30 Build site.
Rmd 12953af lukeholman 2020-04-30 test new theme
html d6437a5 lukeholman 2020-04-25 Build site.
html e58e720 lukeholman 2020-04-25 Build site.
html 2235ae4 lukeholman 2020-04-25 Build site.
Rmd 99649a7 lukeholman 2020-04-25 tweaks
html 99649a7 lukeholman 2020-04-25 tweaks
html 4b72d58 lukeholman 2020-04-24 Build site.
Rmd 67c3145 lukeholman 2020-04-24 tweaks
html 0ede6e3 lukeholman 2020-04-24 Build site.
Rmd a1f8dc2 lukeholman 2020-04-24 tweaks
html a1f8dc2 lukeholman 2020-04-24 tweaks
html 8c3b471 lukeholman 2020-04-21 Build site.
Rmd 1ce9e19 lukeholman 2020-04-21 First commit 2020
html 1ce9e19 lukeholman 2020-04-21 First commit 2020
Rmd aae65cf lukeholman 2019-10-17 First commit
html aae65cf lukeholman 2019-10-17 First commit

Load data and R packages

# All but 1 of these packages can be easily installed from CRAN.
# However it was harder to install the showtext package. On Mac, I did this:
# installed 'homebrew' using Terminal: ruby -e "$(curl -fsSL https://raw.githubusercontent.com/Homebrew/install/master/install)" 
# installed 'libpng' using Terminal: brew install libpng
# installed 'showtext' in R using: devtools::install_github("yixuan/showtext")  
library(showtext)

library(brms)
library(bayesplot)
library(tidyverse)
library(gridExtra)
library(kableExtra)
library(bayestestR)
library(tidybayes)
library(cowplot)
library(car)
source("code/helper_functions.R")

# set up nice font for figure
nice_font <- "Lora"
font_add_google(name = nice_font, family = nice_font, regular.wt = 400, bold.wt = 700)
showtext_auto()

exp1_treatments <- c("Intact control", "Ringers", "Heat-treated LPS", "LPS")

durations <- read_csv("data/data_collection_sheets/experiment_durations.csv") %>%
  filter(experiment == 1) %>% select(-experiment)

durations <- bind_rows(durations, tibble(hive = "SkyLab", observation_time_minutes = 90))

outcome_tally <- read_csv(file = "data/clean_data/experiment_1_outcome_tally.csv") %>%
  mutate(outcome = replace(outcome, outcome == "Left of own volition", "Left voluntarily")) %>%
  mutate(outcome   = factor(outcome, levels = c("Stayed inside the hive", "Left voluntarily", "Forced out")),
         treatment = factor(treatment, levels = exp1_treatments)) 

# Re-formatted version of the same data, where each row is an individual bee. We need this format to run the brms model.
data_for_categorical_model <- outcome_tally %>%
  mutate(id = 1:n()) %>%
  split(.$id) %>%
  map(function(x){
    if(x$n[1] == 0) return(NULL)
    data.frame(
      treatment = x$treatment[1],
      hive = x$hive[1],
      colour = x$colour[1],
      outcome = rep(x$outcome[1], x$n))
  }) %>% do.call("rbind", .) %>% as_tibble() %>%
  arrange(hive, treatment) %>%
  mutate(outcome_numeric = as.numeric(outcome),
         hive = as.character(hive),
         treatment = factor(treatment, levels = exp1_treatments)) %>%
  left_join(durations, by = "hive") %>%
  mutate(hive = C(factor(hive), sum)) # use sum coding for the factor levels of "hive"

Inspect the raw data

Click the three tabs to see each table.

Sample sizes by treatment

sample_sizes <- data_for_categorical_model %>%
  group_by(treatment) %>%
  summarise(n = n(), .groups = "drop") 

sample_sizes %>%
  kable() %>% kable_styling(full_width = FALSE)
treatment n
Intact control 321
Ringers 153
Heat-treated LPS 186
LPS 182

Sample sizes by treatment and hive

data_for_categorical_model %>%
  group_by(hive, treatment) %>%
  summarise(n = n(), .groups = "drop") %>%
  spread(treatment, n) %>%
  kable() %>% kable_styling(full_width = FALSE)
hive Intact control Ringers Heat-treated LPS LPS
Garden 77 41 34 37
SkyLab 105 NA 58 43
Zoology 106 80 67 67
Zoology_2 33 32 27 35

Oberved outcomes

outcome_tally %>%
  select(-colour) %>% 
  spread(outcome, n) %>%
  kable(digits = 3) %>% kable_styling(full_width = FALSE) 
hive treatment Stayed inside the hive Left voluntarily Forced out
Garden Intact control 75 0 2
Garden Ringers 41 0 0
Garden Heat-treated LPS 34 0 0
Garden LPS 37 0 0
SkyLab Intact control 102 3 0
SkyLab Heat-treated LPS 47 6 5
SkyLab LPS 35 6 2
Zoology Intact control 105 0 1
Zoology Ringers 74 1 5
Zoology Heat-treated LPS 59 1 7
Zoology LPS 60 2 5
Zoology_2 Intact control 24 1 8
Zoology_2 Ringers 23 1 8
Zoology_2 Heat-treated LPS 16 1 10
Zoology_2 LPS 21 2 12

Plot showing raw means and 95% CI of the mean

all_hives <- outcome_tally %>%
  group_by(treatment, outcome) %>%
  summarise(n = sum(n), .groups = "drop") %>%
  ungroup() %>% mutate(hive = "All hives")

pd <- position_dodge(.3)
outcome_tally %>%
  group_by(treatment, outcome) %>%
  summarise(n = sum(n), .groups = "drop") %>% mutate() %>%
  group_by(treatment) %>%
  mutate(total_n = sum(n),
         percent = 100 * n / sum(n),
         SE = sqrt(total_n * (percent/100) * (1-(percent/100)))) %>% 
  ungroup() %>%
  mutate(lowerCI = map_dbl(1:n(), ~ 100 * binom.test(n[.x], total_n[.x])$conf.int[1]),
         upperCI = map_dbl(1:n(), ~ 100 * binom.test(n[.x], total_n[.x])$conf.int[2])) %>%
  filter(outcome != "Stayed inside the hive") %>%
  ggplot(aes(treatment, percent, fill = outcome)) + 
  geom_errorbar(aes(ymin=lowerCI, ymax=upperCI), position = pd, width = 0) + 
  geom_point(stat = "identity", position = pd, colour = "grey15", pch = 21, size = 4) + 
  scale_fill_brewer(palette = "Pastel2", name = "Outcome", direction = -1) + 
  xlab("Treatment") + ylab("% bees (\u00B1 95% CIs)") + 
  theme_bw(20) + 
  theme(legend.position = "top",
        text = element_text(family = nice_font)) + 
  coord_flip()

Version Author Date
6ee79e9 lukeholman 2020-08-21
f97baee lukeholman 2020-05-02
8c3b471 lukeholman 2020-04-21
1ce9e19 lukeholman 2020-04-21

Run the preliminary GLM

The multinomial model below is not commonly used, though we believe it is the right choice for this particular experiment (e.g. because it can model a three-item categorical response variable, and it can incorporate priors). However during peer review, we were asked whether the results were similar when using standard statistical methods. To address this question, we here present a frequentist Generalised Linear Model (GLM; using base::glm), which tests the null hypothesis that the proportion of bees exiting the hive (i.e. the proportion leaving voluntarily plus those that were forced out) is equal between treatment groups and hives. The model uses the quasibinomial family, since this family is more robust to overdispersion than the binomial family (though testing revealed both families gave qualitatively identical results).

The model’s qualitative results are similar to those from the multinomial model: bees treated with LPS (either kind) left the hive more often than intact controls, and there were differences between hives in the proportion of bees leaving.

Run the GLM

glm_dat <- outcome_tally %>% 
  group_by(hive, treatment, outcome) %>% 
  summarise(n = sum(n)) %>% 
  mutate(left = ifelse(outcome == "Stayed inside the hive", "stayed_inside" ,"left_hive")) %>% 
  group_by(hive, treatment, left) %>% 
  summarise(n = sum(n)) %>%
  spread(left, n) 

simple_model <- glm(
    cbind(left_hive, stayed_inside) ~ treatment + hive, 
    data = glm_dat, 
    family = "quasibinomial")

Inspect model coefficients and p-values

The reference level for treatment is the Intact Control, and the reference for hive is the hive named Garden.

summary(simple_model)

Call:
glm(formula = cbind(left_hive, stayed_inside) ~ treatment + hive, 
    family = "quasibinomial", data = glm_dat)

Deviance Residuals: 
    Min       1Q   Median       3Q      Max  
-1.5002  -1.0014  -0.2999   0.4537   1.8667  

Coefficients:
                          Estimate Std. Error t value Pr(>|t|)    
(Intercept)                -5.3210     1.0230  -5.201 0.000821 ***
treatmentRingers            0.6951     0.5605   1.240 0.250091    
treatmentHeat-treated LPS   1.3318     0.4693   2.838 0.021884 *  
treatmentLPS                1.2319     0.4753   2.592 0.032023 *  
hiveSkyLab                  2.4051     1.0194   2.359 0.046012 *  
hiveZoology                 1.8803     1.0122   1.858 0.100302    
hiveZoology_2               3.8046     1.0011   3.800 0.005234 ** 
---
Signif. codes:  0 '***' 0.001 '**' 0.01 '*' 0.05 '.' 0.1 ' ' 1

(Dispersion parameter for quasibinomial family taken to be 1.840969)

    Null deviance: 116.658  on 14  degrees of freedom
Residual deviance:  13.318  on  8  degrees of freedom
AIC: NA

Number of Fisher Scoring iterations: 5

Inspect Type II Anova table

Anova(simple_model, test = "LR", Type = "II")
Analysis of Deviance Table (Type II tests)

Response: cbind(left_hive, stayed_inside)
          LR Chisq Df Pr(>Chisq)    
treatment   10.917  3    0.01219 *  
hive        42.607  3  2.982e-09 ***
---
Signif. codes:  0 '***' 0.001 '**' 0.01 '*' 0.05 '.' 0.1 ' ' 1

Baysian multinomial model

Fit the model

Fit the multinomial logistic models, with a 3-item response variable describing what happened to each bee introduced to the hive: stayed inside, left voluntarily, or forced out by the other workers.

if(!file.exists("output/exp1_model.rds")){

  exp1_model <- brm(
    outcome_numeric ~ treatment + hive, 
    data = data_for_categorical_model, 
    prior = c(set_prior("normal(0, 3)", class = "b", dpar = "mu2"),
              set_prior("normal(0, 3)", class = "b", dpar = "mu3")),
    family = "categorical", 
    chains = 4, cores = 4, iter = 5000, seed = 1)
  
  saveRDS(exp1_model, "output/exp1_model.rds") 
}

exp1_model <- readRDS("output/exp1_model.rds")

Posterior predictive check

This plot shows ten predictions from the posterior (pale blue) as well as the original data (dark blue), for the three categorical outcomes (1: stayed inside, 2: left voluntarily, 3: forced out). The predicted number of bees in each outcome category is similar to the real data, illustrating that the model is able to recapitulate the original data fairly closely (a necessary requirement for making inferences from the model).

pp_check(exp1_model, type = "hist", nsamples = 8)

Version Author Date
9ebe5df lukeholman 2021-01-12

Parameter estimates from the model

Raw output of the treatment + hive model

summary(exp1_model)
 Family: categorical 
  Links: mu2 = logit; mu3 = logit 
Formula: outcome_numeric ~ treatment + hive 
   Data: data_for_categorical_model (Number of observations: 842) 
Samples: 4 chains, each with iter = 5000; warmup = 2500; thin = 1;
         total post-warmup samples = 10000

Population-Level Effects: 
                             Estimate Est.Error l-95% CI u-95% CI Rhat Bulk_ESS Tail_ESS
mu2_Intercept                   -5.43      0.71    -6.97    -4.19 1.00     4040     4943
mu3_Intercept                   -3.66      0.36    -4.40    -3.01 1.00     4982     5165
mu2_treatmentRingers             0.67      0.95    -1.33     2.45 1.00     7217     6785
mu2_treatmentHeatMtreatedLPS     1.29      0.62     0.12     2.55 1.00     6951     6273
mu2_treatmentLPS                 1.68      0.60     0.55     2.88 1.00     6480     6007
mu2_hive1                       -3.22      1.48    -6.64    -0.94 1.00     3461     3562
mu2_hive2                        1.90      0.58     0.91     3.17 1.00     3908     4321
mu2_hive3                       -0.08      0.64    -1.28     1.27 1.00     4203     4737
mu3_treatmentRingers             0.56      0.45    -0.31     1.46 1.00     6903     7359
mu3_treatmentHeatMtreatedLPS     1.31      0.40     0.55     2.12 1.00     6391     7223
mu3_treatmentLPS                 0.97      0.41     0.19     1.77 1.00     6812     6626
mu3_hive1                       -1.76      0.58    -3.07    -0.79 1.00     4773     4078
mu3_hive2                       -0.42      0.36    -1.15     0.31 1.00     6117     6236
mu3_hive3                        0.07      0.28    -0.47     0.65 1.00     6219     5669

Samples were drawn using sampling(NUTS). For each parameter, Bulk_ESS
and Tail_ESS are effective sample size measures, and Rhat is the potential
scale reduction factor on split chains (at convergence, Rhat = 1).

Formatted brms output for Table S1

The code chunk below wrangles the raw output of the summary() function for brms models into a more readable table of results, and also adds ‘Bayesian p-values’ (i.e. the posterior probability that the true effect size has the same sign as the reported effect).


Table S1: Table summarising the posterior estimates of each fixed effect in the best-fitting model of Experiment 1. This was a multinomial model with three possible outcomes (stay inside, leave voluntarily, be forced out), and so there are two parameter estimates for the intercept and for each predictor in the model. ‘Treatment’ is a fixed factor with four levels, and the effects shown here are expressed relative to the ‘Intact control’ group. ‘Hive’ was also a fixed factor with four levels; unlike for treatment, we modelled hive using deviation coding, such that the intercept term represents the mean across all hives (in the intact control treatment), and the three hive terms represent the deviation from this mean for three of the four hives. The \(p\) column gives the posterior probability that the true effect size is opposite in sign to what is reported in the Estimate column, similarly to a \(p\)-value.

tableS1 <- get_fixed_effects_with_p_values(exp1_model) %>% 
  mutate(mu = map_chr(str_extract_all(Parameter, "mu[:digit:]"), ~ .x[1]),
         Parameter = str_remove_all(Parameter, "mu[:digit:]_"),
         Parameter = str_replace_all(Parameter, "treatment", "Treatment: "),
         Parameter = str_replace_all(Parameter, "HeatMtreatedLPS", "Heat-treated LPS")) %>%
  arrange(mu) %>%
  select(-mu, -Rhat, -Bulk_ESS, -Tail_ESS) %>%
  mutate(PP = format(round(PP, 4), nsmall = 4))

names(tableS1)[3:5] <- c("Est. Error", "Lower 95% CI", "Upper 95% CI")

saveRDS(tableS1, file = "figures/tableS1.rds")

tableS1 %>%
  kable(digits = 3) %>% 
  kable_styling(full_width = FALSE) %>%
  pack_rows("% bees leaving voluntarily", 1, 7) %>%
  pack_rows("% bees forced out", 8, 14)
Parameter Estimate Est. Error Lower 95% CI Upper 95% CI PP
% bees leaving voluntarily
Intercept -5.429 0.712 -6.972 -4.189 0.0000 ***
Treatment: Ringers 0.669 0.946 -1.332 2.453 0.2282
Treatment: Heat-treated LPS 1.294 0.618 0.121 2.551 0.0162 *
Treatment: LPS 1.679 0.600 0.554 2.876 0.0021 **
hive1 -3.216 1.482 -6.636 -0.942 0.0003 ***
hive2 1.900 0.582 0.910 3.170 0.0000 ***
hive3 -0.082 0.643 -1.278 1.266 0.4311
% bees forced out
Intercept -3.656 0.359 -4.403 -3.005 0.0000 ***
Treatment: Ringers 0.564 0.449 -0.311 1.457 0.1062
Treatment: Heat-treated LPS 1.308 0.400 0.545 2.116 0.0004 ***
Treatment: LPS 0.973 0.410 0.193 1.775 0.0068 **
hive1 -1.761 0.581 -3.069 -0.789 0.0000 ***
hive2 -0.421 0.365 -1.151 0.305 0.1194
hive3 0.069 0.282 -0.469 0.646 0.4161

Plotting estimates from the model

Derive prediction from the posterior

get_posterior_preds <- function(focal_hive){
  new <- expand.grid(treatment = levels(data_for_categorical_model$treatment), 
                     hive = focal_hive)
  
  preds <- fitted(exp1_model, newdata = new, summary = FALSE)
  dimnames(preds) <- list(NULL, new[,1], NULL)
  
  rbind(
    as.data.frame(preds[,, 1]) %>% 
      mutate(outcome = "Stayed inside the hive", posterior_sample = 1:n()),
    as.data.frame(preds[,, 2]) %>% 
      mutate(outcome = "Left voluntarily", posterior_sample = 1:n()),
    as.data.frame(preds[,, 3]) %>% 
      mutate(outcome = "Forced out", posterior_sample = 1:n())) %>%
    gather(treatment, prop, `Intact control`, Ringers, `Heat-treated LPS`, LPS) %>% 
    mutate(outcome = factor(outcome, 
                            c("Stayed inside the hive", "Left voluntarily", "Forced out")),
           treatment = factor(treatment, 
                              c("Intact control", "Ringers", "Heat-treated LPS", "LPS"))) %>%
    as_tibble() %>% arrange(treatment, outcome) 
}

# plotting data for panel A: one specific hive
plotting_data <- get_posterior_preds(focal_hive = "Zoology")

# stats data: for panel B and the table of stats
stats_data <- get_posterior_preds(focal_hive = NA)

Make Figure 1

cols <- RColorBrewer::brewer.pal(3, "Set2")

dot_plot <- plotting_data %>%
  left_join(sample_sizes, by = "treatment") %>%
  arrange(treatment) %>%
  mutate(outcome = str_replace_all(outcome, "Stayed inside the hive", "Stayed inside"),
         outcome = factor(outcome, c("Stayed inside", "Left voluntarily", "Forced out")),
         treatment = factor(paste(treatment, "\n(n = ", n, ")", sep = ""),
                            unique(paste(treatment, "\n(n = ", n, ")", sep = "")))) %>% 
  ggplot(aes(100 * prop, treatment)) + 
  stat_dotsh(quantiles = 100, fill = "grey40", colour = "grey40") + 
  stat_pointintervalh(aes(colour = outcome, fill = outcome), 
                      .width = c(0.5, 0.95),
                      position = position_nudge(y = -0.07), 
                      point_colour = "grey26", pch = 21, stroke = 0.4) + 
  scale_colour_manual(values = cols) + 
  scale_fill_manual(values = cols) + 
  facet_wrap( ~ outcome, scales = "free_x") + 
  xlab("% bees (posterior estimate)") + ylab("Treatment") + 
  theme_bw() + 
  coord_cartesian(ylim=c(1.4, 4)) + 
  theme(
    text = element_text(family = nice_font),
    strip.background = element_rect(fill = "#eff0f1"),
    panel.grid.major.y = element_blank(),
    legend.position = "none"
  ) 
  
# positive effect = odds of this outcome are higher for trt2 than trt1 (put control as trt1)
get_log_odds <- function(trt1, trt2){ 
  log((trt2 / (1 - trt2) / (trt1 / (1 - trt1))))
}

LOR <- stats_data %>%
  spread(treatment, prop) %>%
  mutate(LOR_intact_Ringers = get_log_odds(`Intact control`, Ringers),
         LOR_intact_heat = get_log_odds(`Intact control`, `Heat-treated LPS`),
         LOR_intact_LPS = get_log_odds(`Intact control`, LPS),
         LOR_Ringers_heat = get_log_odds(Ringers, `Heat-treated LPS`),
         LOR_Ringers_LPS = get_log_odds(Ringers, LPS), 
         LOR_heat_LPS = get_log_odds(`Heat-treated LPS`, LPS)) %>%
  select(posterior_sample, outcome, starts_with("LOR")) %>%
  gather(LOR, comparison, starts_with("LOR")) %>%
  mutate(LOR = str_remove_all(LOR, "LOR_"), 
         LOR = str_replace_all(LOR, "heat_LPS", "LPS\n(Heat-treated LPS)"),
         LOR = str_replace_all(LOR, "Ringers_LPS", "LPS\n(Ringers)"),
         LOR = str_replace_all(LOR, "Ringers_heat", "Heat-treated LPS\n(Ringers)"),
         LOR = str_replace_all(LOR, "intact_Ringers", "Ringers\n(Intact control)"),
         LOR = str_replace_all(LOR, "intact_heat", "Heat-treated LPS\n(Intact control)"),
         LOR = str_replace_all(LOR, "intact_LPS", "LPS\n(Intact control)"))

levs <- LOR$LOR %>% unique() %>% sort()
LOR$LOR <- factor(LOR$LOR, rev(levs[c(3,5,4,2,1,6)]))

LOR_plot <- LOR %>%
  mutate(outcome = str_replace_all(outcome, "Stayed inside the hive", "Stayed inside"),
         outcome = factor(outcome, levels = rev(c("Forced out", "Left voluntarily", "Stayed inside")))) %>%
  ggplot(aes(y = comparison, x = LOR, colour = outcome)) + 
  geom_hline(yintercept = 0, size = 0.3, colour = "grey20") + 
  geom_hline(yintercept = log(2), linetype = 2, size = 0.6, colour = "grey") +
  geom_hline(yintercept = -log(2), linetype = 2, size = 0.6, colour = "grey") +
  stat_pointinterval(aes(colour = outcome, fill = outcome), 
                      .width = c(0.5, 0.95),
                      position = position_dodge(0.6), 
                      point_colour = "grey26", pch = 21, stroke = 0.4) + 
  scale_colour_manual(values = cols) + 
  scale_fill_manual(values = cols) + 
  ylab("Effect size (posterior log odds ratio)") + 
  xlab("Treatment (reference)") + 
  theme_bw() +
  coord_flip() +
  theme(
    text = element_text(family = nice_font),
    panel.grid.major.y = element_blank(),
    legend.position = "none"
  ) 


p <- cowplot::plot_grid(
  plotlist = list(dot_plot, LOR_plot), 
  labels = c("A", "B"),
  nrow = 1, align = 'v', axis = 'l', 
  rel_heights = c(1.4, 1))
ggsave(plot = p, filename = "figures/fig1.pdf", height = 3.4, width = 9)
p

Version Author Date
9ebe5df lukeholman 2021-01-12
939ecd0 lukeholman 2021-01-11
eeb5a09 lukeholman 2020-11-30



Figure 1: Panel A shows the posterior estimate of the mean % bees staying inside the hive (left), leaving voluntarily (middle), or being forced out (right), for each of the four treatments. The quantile dot plot shows 100 approximately equally likely estimates of the true % bees, and the horizontal bars show the median and the 50% and 95% credible intervals of the posterior distribution. Panel B gives the posterior estimates of the effect size of each treatment, relative to one of the other treatments (the name of which appears in parentheses), and expressed as a log odds ratio (LOR). Positive LOR indicates that the % bees showing this particular outcome is higher in the treatment than the control; for example, more bees left voluntarily (green) or were forced out (orange) in the LPS treatment than in the intact control. The dashed lines mark \(LOR = 0\), indicating no effect, and \(LOR = \pm log(2)\), i.e. the point at which the odds are twice as high in one treatment as the other.

Hypothesis testing and effect sizes

This section calculates the posterior difference in treatment group means, in order to perform some null hypothesis testing, calculate effect size (as a log odds ratio), and calculate the 95% credible intervals on the effect size.

The following code chunks perform planned contrasts between pairs of treatments that we consider important to the biological hypotheses under test. For example the contrast between the LPS treatment and the Ringers treatment provides information about the effect of immmune stimulation, while the Ringers - Intact Control contrast provides information about the effect of wounding in the absence of LPS.

Calculate contrasts: % bees staying inside the hive

# Helper function to summarise a posterior, including calculating
# p_direction, i.e. the posterior probability that the effect size has the stated direction,
# which has a similar interpretation to a one-tailed p-value
my_summary <- function(df, columns) {
  lapply(columns, function(x){

    p <- 1 - (df %>% pull(!! x) %>%
                bayestestR::p_direction() %>% as.numeric())

    df %>% pull(!! x) %>% posterior_summary() %>% as_tibble() %>%
      mutate(PP = p) %>% mutate(Metric = x) %>% select(Metric, everything()) %>%
      mutate(` ` = ifelse(PP < 0.1, "~", ""),
             ` ` = replace(` `, PP < 0.05, "\\*"),
             ` ` = replace(` `, PP < 0.01, "**"),
             ` ` = replace(` `, PP < 0.001, "***"),
             ` ` = replace(` `, PP == " ", ""))
  }) %>% do.call("rbind", .)
}

# Helper to make one unit of the big stats table
make_stats_table <- function(
  dat, groupA, groupB, comparison, metric){
  
  output <- dat %>%
    spread(treatment, prop) %>%
    mutate(
      metric_here = 100 * (!! enquo(groupB) - !! enquo(groupA)), 
      `Log odds ratio` = get_log_odds(!! enquo(groupA), !! enquo(groupB))) %>%   
    my_summary(c("metric_here", "Log odds ratio")) %>%
    mutate(PP = c(" ", format(round(PP[2], 4), nsmall = 4)),
           ` ` = c(" ", ` `[2]),
           Comparison = comparison) %>%
    select(Comparison, everything()) %>%
    mutate(Metric = replace(Metric, Metric == "metric_here", metric))
  
  names(output)[names(output) == "metric_here"] <- metric
  output 
}

stayed_inside_stats_table <- rbind(
  
  stats_data %>%
    filter(outcome == "Stayed inside the hive") %>%
    make_stats_table(`Heat-treated LPS`, `LPS`, "LPS (Heat-treated LPS)",
                     metric = "Difference in % bees staying inside"),
  
  stats_data %>%
    filter(outcome == "Stayed inside the hive") %>%
    make_stats_table(`Ringers`, `LPS`, "LPS (Ringers)",
                     metric = "Difference in % bees staying inside"),
  
  stats_data %>%
    filter(outcome == "Stayed inside the hive") %>%
    make_stats_table(`Intact control`, `LPS`, "LPS (Intact control)",
                     metric = "Difference in % bees staying inside"),
  
  stats_data %>%
    filter(outcome == "Stayed inside the hive") %>%
    make_stats_table(`Ringers`, `Heat-treated LPS`, "Heat-treated LPS (Ringers)",
                     metric = "Difference in % bees staying inside"),
  
  stats_data %>%
    filter(outcome == "Stayed inside the hive") %>%
    make_stats_table(`Intact control`, `Heat-treated LPS`, "Heat-treated LPS (Intact control)",
                     metric = "Difference in % bees staying inside"),  
  
  stats_data %>%
    filter(outcome == "Stayed inside the hive") %>%
    make_stats_table(`Intact control`, `Ringers`, "Ringers (Intact control)",
                     metric = "Difference in % bees staying inside")
  
) %>% as_tibble()

stayed_inside_stats_table[c(2,4,6,8,10,12), 1] <- " "

Calculate contrasts: % bees that left voluntarily

voluntary_stats_table <- rbind(
  
  stats_data %>%
    filter(outcome == "Left voluntarily") %>%
    make_stats_table(`Heat-treated LPS`, `LPS`, 
                     "LPS (Heat-treated LPS)", 
                     metric = "Difference in % bees leaving voluntarily"),
  
  stats_data %>%
    filter(outcome == "Left voluntarily") %>%
    make_stats_table(`Ringers`, `LPS`, 
                     "LPS (Ringers)", 
                     metric = "Difference in % bees leaving voluntarily"),
  
   stats_data %>%
    filter(outcome == "Left voluntarily") %>%
    make_stats_table(`Intact control`, `LPS`, 
                     "LPS (Intact control)", 
                     metric = "Difference in % bees leaving voluntarily"),
  
  stats_data %>%
    filter(outcome == "Left voluntarily") %>%
    make_stats_table(`Ringers`, `Heat-treated LPS`, 
                     "Heat-treated LPS (Ringers)", 
                     metric = "Difference in % bees leaving voluntarily"),
  
  stats_data %>%
    filter(outcome == "Left voluntarily") %>%
    make_stats_table(`Intact control`, `Heat-treated LPS`, 
                     "Heat-treated LPS (Intact control)", 
                     metric = "Difference in % bees leaving voluntarily"),

  stats_data %>%
    filter(outcome == "Left voluntarily") %>%
    make_stats_table(`Intact control`, `Ringers`, 
                     "Ringers (Intact control)",
                     metric = "Difference in % bees leaving voluntarily")
) %>% as_tibble()

voluntary_stats_table[c(2,4,6,8,10,12), 1] <- " "

Calculate contrasts: % bees that were forced out

forced_out_stats_table <- rbind(
  
  stats_data %>%
    filter(outcome == "Forced out") %>%
    make_stats_table(`Heat-treated LPS`, `LPS`, 
                     "LPS (Heat-treated LPS)", 
                     metric = "Difference in % bees forced out"),
  
  stats_data %>%
    filter(outcome == "Forced out") %>%
    make_stats_table(`Ringers`, `LPS`, 
                     "LPS (Ringers)", 
                     metric = "Difference in % bees forced out"),
  
  stats_data %>%
    filter(outcome == "Forced out") %>%
    make_stats_table(`Intact control`, `LPS`, 
                     "LPS (Intact control)", 
                     metric = "Difference in % bees forced out"),
  
  stats_data %>%
    filter(outcome == "Forced out") %>%
    make_stats_table(`Ringers`, `Heat-treated LPS`, 
                     "Heat-treated LPS (Ringers)", 
                     metric = "Difference in % bees forced out"),  
  stats_data %>%
    filter(outcome == "Forced out") %>%
    make_stats_table(`Intact control`, `Heat-treated LPS`, 
                     "Heat-treated LPS (Intact control)", 
                     metric = "Difference in % bees forced out"),
  
  stats_data %>%
    filter(outcome == "Left voluntarily") %>%
    make_stats_table(`Intact control`, `Ringers`, "Ringers (Intact control)",
                     metric = "Difference in % bees forced out")
) %>% as_tibble()

forced_out_stats_table[c(2,4,6,8,10,12), 1] <- " "

Present all contrasts in one table:

Table S2: This table gives statistics associated with each of the contrasts plotted in Figure 1B. Each pair of rows gives the absolute effect size (i.e. the difference in % bees) and standardised effect size (as log odds ratio; LOR) for the focal treatment, relative to the treatment shown in parentheses, for one of the three possible outcomes (stayed inside, left voluntarily, or forced out). A LOR of \(|log(x)|\) indicates that the outcome is \(x\) times more frequent in one treatment compared to the other, e.g. \(log(2) = 0.69\) and \(log(0.5) = -0.69\) correspond to a two-fold difference in frequency. The \(PP\) column gives the posterior probability that the true effect size has the same sign as is shown in the Estimate column; this metric has a similar interpretation to a one-tailed \(p\) value in frequentist statistics.

tableS2 <- bind_rows(
  stayed_inside_stats_table,
  voluntary_stats_table,
  forced_out_stats_table) 

saveRDS(tableS2, file = "figures/tableS2.rds")

tableS2 %>%
  kable(digits = 2) %>% kable_styling(full_width = FALSE) %>% 
  row_spec(seq(2,36,by=2), extra_css = "border-bottom: solid;") %>%
  pack_rows("% bees staying inside", 1, 12) %>%
  pack_rows("% bees leaving voluntarily", 13, 24) %>%
  pack_rows("% bees forced out", 25, 36)
Comparison Metric Estimate Est.Error Q2.5 Q97.5 PP
% bees staying inside
LPS (Heat-treated LPS) Difference in % bees staying inside 1.57 2.85 -3.82 7.33
Log odds ratio 0.18 0.33 -0.45 0.83 0.2911
LPS (Ringers) Difference in % bees staying inside -3.31 2.59 -8.60 1.62
Log odds ratio -0.51 0.39 -1.28 0.24 0.0895 ~
LPS (Intact control) Difference in % bees staying inside -5.83 2.24 -10.66 -1.93
Log odds ratio -1.11 0.36 -1.81 -0.42 8e-04 ***
Heat-treated LPS (Ringers) Difference in % bees staying inside -4.88 2.79 -10.53 0.44
Log odds ratio -0.70 0.39 -1.45 0.06 0.0367 *
Heat-treated LPS (Intact control) Difference in % bees staying inside -7.40 2.49 -12.75 -3.03
Log odds ratio -1.30 0.35 -2.00 -0.62 1e-04 ***
Ringers (Intact control) Difference in % bees staying inside -2.52 1.91 -6.72 0.75
Log odds ratio -0.60 0.41 -1.43 0.21 0.0721 ~
% bees leaving voluntarily
LPS (Heat-treated LPS) Difference in % bees leaving voluntarily 0.79 1.13 -1.21 3.46
Log odds ratio 0.41 0.51 -0.60 1.42 0.2121
LPS (Ringers) Difference in % bees leaving voluntarily 1.36 1.38 -1.10 4.47
Log odds ratio 0.99 0.87 -0.56 2.92 0.1183
LPS (Intact control) Difference in % bees leaving voluntarily 1.97 1.22 0.30 4.95
Log odds ratio 1.64 0.60 0.51 2.84 0.0025 **
Heat-treated LPS (Ringers) Difference in % bees leaving voluntarily 0.57 1.19 -1.83 3.16
Log odds ratio 0.58 0.91 -1.08 2.53 0.2668
Heat-treated LPS (Intact control) Difference in % bees leaving voluntarily 1.18 0.89 0.03 3.43
Log odds ratio 1.23 0.62 0.05 2.47 0.0213 *
Ringers (Intact control) Difference in % bees leaving voluntarily 0.61 0.92 -0.65 2.95
Log odds ratio 0.65 0.95 -1.36 2.43 0.2363
% bees forced out
LPS (Heat-treated LPS) Difference in % bees forced out -2.36 2.60 -7.79 2.48
Log odds ratio -0.34 0.37 -1.07 0.37 0.1843
LPS (Ringers) Difference in % bees forced out 1.95 2.18 -2.21 6.35
Log odds ratio 0.39 0.42 -0.41 1.22 0.1741
LPS (Intact control) Difference in % bees forced out 3.86 1.93 0.61 8.12
Log odds ratio 0.95 0.41 0.17 1.75 0.0078 **
Heat-treated LPS (Ringers) Difference in % bees forced out 4.31 2.54 -0.38 9.60
Log odds ratio 0.74 0.41 -0.07 1.55 0.0374 *
Heat-treated LPS (Intact control) Difference in % bees forced out 6.22 2.36 2.18 11.43
Log odds ratio 1.29 0.40 0.53 2.10 5e-04 ***
Ringers (Intact control) Difference in % bees forced out 0.61 0.92 -0.65 2.95
Log odds ratio 0.65 0.95 -1.36 2.43 0.2363

sessionInfo()
R version 4.0.3 (2020-10-10)
Platform: x86_64-apple-darwin17.0 (64-bit)
Running under: macOS Catalina 10.15.7

Matrix products: default
BLAS:   /Library/Frameworks/R.framework/Versions/4.0/Resources/lib/libRblas.dylib
LAPACK: /Library/Frameworks/R.framework/Versions/4.0/Resources/lib/libRlapack.dylib

locale:
[1] en_GB.UTF-8/en_GB.UTF-8/en_GB.UTF-8/C/en_GB.UTF-8/en_GB.UTF-8

attached base packages:
[1] stats     graphics  grDevices utils     datasets  methods   base     

other attached packages:
 [1] car_3.0-8        carData_3.0-4    cowplot_1.0.0    tidybayes_2.0.3  bayestestR_0.6.0 kableExtra_1.1.0
 [7] gridExtra_2.3    forcats_0.5.0    stringr_1.4.0    dplyr_1.0.0      purrr_0.3.4      readr_1.3.1     
[13] tidyr_1.1.0      tibble_3.0.1     ggplot2_3.3.2    tidyverse_1.3.0  bayesplot_1.7.2  brms_2.14.4     
[19] Rcpp_1.0.4.6     showtext_0.9-1   showtextdb_3.0   sysfonts_0.8.2   workflowr_1.6.2 

loaded via a namespace (and not attached):
  [1] readxl_1.3.1         backports_1.1.7      plyr_1.8.6           igraph_1.2.5         svUnit_1.0.3        
  [6] splines_4.0.3        crosstalk_1.1.0.1    TH.data_1.0-10       rstantools_2.1.1     inline_0.3.15       
 [11] digest_0.6.25        htmltools_0.5.0      rsconnect_0.8.16     fansi_0.4.1          magrittr_2.0.1      
 [16] openxlsx_4.1.5       modelr_0.1.8         RcppParallel_5.0.1   matrixStats_0.56.0   xts_0.12-0          
 [21] sandwich_2.5-1       prettyunits_1.1.1    colorspace_1.4-1     blob_1.2.1           rvest_0.3.5         
 [26] haven_2.3.1          xfun_0.19            callr_3.4.3          crayon_1.3.4         jsonlite_1.7.0      
 [31] lme4_1.1-23          survival_3.2-7       zoo_1.8-8            glue_1.4.2           gtable_0.3.0        
 [36] emmeans_1.4.7        webshot_0.5.2        V8_3.4.0             pkgbuild_1.0.8       rstan_2.21.2        
 [41] abind_1.4-5          scales_1.1.1         mvtnorm_1.1-0        DBI_1.1.0            miniUI_0.1.1.1      
 [46] viridisLite_0.3.0    xtable_1.8-4         foreign_0.8-80       stats4_4.0.3         StanHeaders_2.21.0-3
 [51] DT_0.13              htmlwidgets_1.5.1    httr_1.4.1           threejs_0.3.3        RColorBrewer_1.1-2  
 [56] arrayhelpers_1.1-0   ellipsis_0.3.1       farver_2.0.3         pkgconfig_2.0.3      loo_2.3.1           
 [61] dbplyr_1.4.4         labeling_0.3         tidyselect_1.1.0     rlang_0.4.6          reshape2_1.4.4      
 [66] later_1.0.0          munsell_0.5.0        cellranger_1.1.0     tools_4.0.3          cli_2.0.2           
 [71] generics_0.0.2       broom_0.5.6          ggridges_0.5.2       evaluate_0.14        fastmap_1.0.1       
 [76] yaml_2.2.1           processx_3.4.2       knitr_1.30           fs_1.4.1             zip_2.0.4           
 [81] nlme_3.1-149         whisker_0.4          mime_0.9             projpred_2.0.2       xml2_1.3.2          
 [86] compiler_4.0.3       shinythemes_1.1.2    rstudioapi_0.11      curl_4.3             gamm4_0.2-6         
 [91] reprex_0.3.0         statmod_1.4.34       stringi_1.5.3        highr_0.8            ps_1.3.3            
 [96] Brobdingnag_1.2-6    lattice_0.20-41      Matrix_1.2-18        nloptr_1.2.2.1       markdown_1.1        
[101] shinyjs_1.1          vctrs_0.3.0          pillar_1.4.4         lifecycle_0.2.0      bridgesampling_1.0-0
[106] estimability_1.3     data.table_1.12.8    insight_0.8.4        httpuv_1.5.3.1       R6_2.4.1            
[111] promises_1.1.0       rio_0.5.16           codetools_0.2-16     boot_1.3-25          colourpicker_1.0    
[116] MASS_7.3-53          gtools_3.8.2         assertthat_0.2.1     rprojroot_1.3-2      withr_2.2.0         
[121] shinystan_2.5.0      multcomp_1.4-13      mgcv_1.8-33          parallel_4.0.3       hms_0.5.3           
[126] grid_4.0.3           coda_0.19-3          minqa_1.2.4          rmarkdown_2.5        git2r_0.27.1        
[131] shiny_1.4.0.2        lubridate_1.7.8      base64enc_0.1-3      dygraphs_1.1.1.6